Skip to contentSkip to conversation

Add make check tests for Migration

PATCH Superseded Juan Quintela 5 participants 16 messages Apr 25, 2018 – May 8, 2018

v8 of 14 Superseded Latest is v14 →

lore
Share & tools
lore
#0 lore raw

v8 cover Add make check tests for Migration

Hi

v8:
- just rebase to make things continue to wonk

New in the other v7:
- SocketAddress is now a list (a.k.a make happy danp)
- Rebase on top of upstream
network listener is *interesting*
- *HACK* to make SocketAddress list in common see patch: create-socket-paramenter

Please review, Juan.

[v7]
This is v6, it differest from the patches that I sent with previous multifd post:
- Rename x-tcp-port to x-socket-address
This is more *complicated* that it looks as:

* it is a pointer, so I need to use QAPI_CLONE() to make info migrate work

* this is an union of structs. In QAPI. So, a dict of strings. The only way that I was able to make things work is parsing the qdict to a SocketAddress and then output a SocketAddress as an str. It needs to be an easier way, for sure.

* Cleanups here andthere.

Please, review, Juan.

[v5]
- Several patches moved to pull request
- merge info_migrate and migration_tests
only missing bit is tcp_port, needed for tcp tests
- Rename tcp-port to x-tcp-port
We will get better naming from David at some point, and we will use that bit
- ppc: use inline code as suggested by lvivier

Please, review.

It is based on my previous pull request

Based-on: [email protected]

[v4]
- rebase on top on v4 info_migrate patches
- Tune sleeps to make patches fast
- Create a deprecated test for deprecated commands (i.e. make peterxu happy)
- create migrate_start_postcopy function
- fix naming/sizes between power and x86
- cleanup comments to match code

[v3]

- No more tests for deprecated parameters. Now I only use migrate_set_parameter. If there is a deprecated command for that, we tests it there.
- free "result" string, always good to return memory (Peter found it)
- use the new tcp_port parameter from info migrate. So we are handling well the tcp case.
- lots of code movement around to make everything consistent.
- Several patches already integrated upstream.

[v2]
- to make review easier, I started renaming postcopy-test.c to migration-test.c
- Did cleanups/refactoring there
- Don't use global-qtest anymore
- check that the parameters that we sent got really set
- RFH: comrpress threads tests is not working for some weird reason. Using the same code on command line works. still investigating why.

ToDoo:

- tcp: after discussions with dave, we ended in conclusion that we need to use the 0 port and let the system gives us a free one

But .... that means that we need to be able to get that port back somehow. "info migrate" woring on destination side?

- compression threads. There is some weird interaction with the test hardness and every migration thread get waiting in a different semaphore. Investigating if it is a race/bug/whateverr

- deprecated commands: There was a suggestion to make migrate_set_parameter look at the parameter name and test old/new depending on something. Not sure what to do here.

- testing commands: Is there a way to launch qemu and just sent qmp/hmp commands without having to really run anything else?

[v1]
- add test for precopy for unix/tcp
exec and fd to came, don't know how to test rdma without hardware
- add tests using deprecated interfaces
- add test for xbzrle
Note to myself, there is no way to set the cache size with migraton_set_parameters
- Add test for compress threads
disabled on the series, right now it appears that compression is not working at all
- Move postcopy to use new results
Idea is to move it on top of migration-test.c, but first I want some reviews on basic idea

Juan Quintela (8):
qemu-sockets: Export SocketAddress_to_str
tests: Add migration precopy test
tests: Add migration xbzrle test
migration: Create socket-address parameter
tests: Migration ppc now inlines its program
tests: Add basic migration precopy tcp test
migration: Add multifd test
[RFH] tests: Add migration compress threads tests

 chardev/char-socket.c  |  29 ----
 hmp.c                  |  14 ++
 include/qemu/sockets.h |   3 +
 migration/migration.c  |  25 ++++
 migration/migration.h  |   1 +
 migration/socket.c     |  11 ++
 qapi/migration.json    |  13 +-
 qapi/sockets.json      |  13 ++
 tests/migration-test.c | 332 ++++++++++++++++++++++++++++++++++++-----
 util/qemu-sockets.c    |  29 ++++
 10 files changed, 398 insertions(+), 72 deletions(-)
Signature · 1 line
2.17.0
#1 lore raw

PATCH v8 1/8 qemu-sockets: Export SocketAddress_to_str

Migration code needs that function in hmp.c (so we need to export it), and it needs it on tests/migration-test.c, so we need to move it to a place where it is compiled into the test framework.

---
 chardev/char-socket.c  | 29 -----------------------------
 include/qemu/sockets.h |  3 +++
 util/qemu-sockets.c    | 29 +++++++++++++++++++++++++++++
 3 files changed, 32 insertions(+), 29 deletions(-)
chardev/char-socket.c +0 -29
index 159e69c3b1..3bbf3a37a0 100644
@@ -382,35 +382,6 @@ static void tcp_chr_free_connection(Chardev *chr)
     s->connected = 0;
 }
 
-static char *SocketAddress_to_str(const char *prefix, SocketAddress *addr,
-                                  bool is_listen, bool is_telnet)
-{
-    switch (addr->type) {
-    case SOCKET_ADDRESS_TYPE_INET:
-        return g_strdup_printf("%s%s:%s:%s%s", prefix,
-                               is_telnet ? "telnet" : "tcp",
-                               addr->u.inet.host,
-                               addr->u.inet.port,
-                               is_listen ? ",server" : "");
-        break;
-    case SOCKET_ADDRESS_TYPE_UNIX:
-        return g_strdup_printf("%sunix:%s%s", prefix,
-                               addr->u.q_unix.path,
-                               is_listen ? ",server" : "");
-        break;
-    case SOCKET_ADDRESS_TYPE_FD:
-        return g_strdup_printf("%sfd:%s%s", prefix, addr->u.fd.str,
-                               is_listen ? ",server" : "");
-        break;
-    case SOCKET_ADDRESS_TYPE_VSOCK:
-        return g_strdup_printf("%svsock:%s:%s", prefix,
-                               addr->u.vsock.cid,
-                               addr->u.vsock.port);
-    default:
-        abort();
-    }
-}
-
 static void update_disconnected_filename(SocketChardev *s)
 {
     Chardev *chr = CHARDEV(s);
include/qemu/sockets.h +3 -0
index 8140fea685..efea0ea850 100644
@@ -110,4 +110,7 @@ SocketAddress *socket_remote_address(int fd, Error **errp);
  */
 SocketAddress *socket_address_flatten(SocketAddressLegacy *addr);
 
+char *SocketAddress_to_str(const char *prefix, SocketAddress *addr,
+                           bool is_listen, bool is_telnet);
+
 #endif /* QEMU_SOCKETS_H */
util/qemu-sockets.c +29 -0
index 8bd8bb64eb..09f04bf76b 100644
@@ -1333,3 +1333,32 @@ SocketAddress *socket_address_flatten(SocketAddressLegacy *addr_legacy)
 
     return addr;
 }
+
+char *SocketAddress_to_str(const char *prefix, SocketAddress *addr,
+                                  bool is_listen, bool is_telnet)
+{
+    switch (addr->type) {
+    case SOCKET_ADDRESS_TYPE_INET:
+        return g_strdup_printf("%s%s:%s:%s%s", prefix,
+                               is_telnet ? "telnet" : "tcp",
+                               addr->u.inet.host,
+                               addr->u.inet.port,
+                               is_listen ? ",server" : "");
+        break;
+    case SOCKET_ADDRESS_TYPE_UNIX:
+        return g_strdup_printf("%sunix:%s%s", prefix,
+                               addr->u.q_unix.path,
+                               is_listen ? ",server" : "");
+        break;
+    case SOCKET_ADDRESS_TYPE_FD:
+        return g_strdup_printf("%sfd:%s%s", prefix, addr->u.fd.str,
+                               is_listen ? ",server" : "");
+        break;
+    case SOCKET_ADDRESS_TYPE_VSOCK:
+        return g_strdup_printf("%svsock:%s:%s", prefix,
+                               addr->u.vsock.cid,
+                               addr->u.vsock.port);
+    default:
+        abort();
+    }
+}
Signature · 1 line
2.17.0
Reviewed-by on v8 1/8
#2 lore raw

Re: [Qemu-devel] [PATCH v8 1/8] qemu-sockets: Export SocketAddress_to_str

Quoted 5 lines · * Juan Quintela ([email protected]) wrote:

Migration code needs that function in hmp.c (so we need to export it), and it needs it on tests/migration-test.c, so we need to move it to a place where it is compiled into the test framework.

Quoted 98 lines
---
 chardev/char-socket.c  | 29 -----------------------------
 include/qemu/sockets.h |  3 +++
 util/qemu-sockets.c    | 29 +++++++++++++++++++++++++++++
 3 files changed, 32 insertions(+), 29 deletions(-)
chardev/char-socket.c +0 -29
index 159e69c3b1..3bbf3a37a0 100644
@@ -382,35 +382,6 @@ static void tcp_chr_free_connection(Chardev *chr)
     s->connected = 0;
 }
 
-static char *SocketAddress_to_str(const char *prefix, SocketAddress *addr,
-                                  bool is_listen, bool is_telnet)
-{
-    switch (addr->type) {
-    case SOCKET_ADDRESS_TYPE_INET:
-        return g_strdup_printf("%s%s:%s:%s%s", prefix,
-                               is_telnet ? "telnet" : "tcp",
-                               addr->u.inet.host,
-                               addr->u.inet.port,
-                               is_listen ? ",server" : "");
-        break;
-    case SOCKET_ADDRESS_TYPE_UNIX:
-        return g_strdup_printf("%sunix:%s%s", prefix,
-                               addr->u.q_unix.path,
-                               is_listen ? ",server" : "");
-        break;
-    case SOCKET_ADDRESS_TYPE_FD:
-        return g_strdup_printf("%sfd:%s%s", prefix, addr->u.fd.str,
-                               is_listen ? ",server" : "");
-        break;
-    case SOCKET_ADDRESS_TYPE_VSOCK:
-        return g_strdup_printf("%svsock:%s:%s", prefix,
-                               addr->u.vsock.cid,
-                               addr->u.vsock.port);
-    default:
-        abort();
-    }
-}
-
 static void update_disconnected_filename(SocketChardev *s)
 {
     Chardev *chr = CHARDEV(s);
include/qemu/sockets.h +3 -0
index 8140fea685..efea0ea850 100644
@@ -110,4 +110,7 @@ SocketAddress *socket_remote_address(int fd, Error **errp);
  */
 SocketAddress *socket_address_flatten(SocketAddressLegacy *addr);
 
+char *SocketAddress_to_str(const char *prefix, SocketAddress *addr,
+                           bool is_listen, bool is_telnet);
+
 #endif /* QEMU_SOCKETS_H */
util/qemu-sockets.c +29 -0
index 8bd8bb64eb..09f04bf76b 100644
@@ -1333,3 +1333,32 @@ SocketAddress *socket_address_flatten(SocketAddressLegacy *addr_legacy)
 
     return addr;
 }
+
+char *SocketAddress_to_str(const char *prefix, SocketAddress *addr,
+                                  bool is_listen, bool is_telnet)
+{
+    switch (addr->type) {
+    case SOCKET_ADDRESS_TYPE_INET:
+        return g_strdup_printf("%s%s:%s:%s%s", prefix,
+                               is_telnet ? "telnet" : "tcp",
+                               addr->u.inet.host,
+                               addr->u.inet.port,
+                               is_listen ? ",server" : "");
+        break;
+    case SOCKET_ADDRESS_TYPE_UNIX:
+        return g_strdup_printf("%sunix:%s%s", prefix,
+                               addr->u.q_unix.path,
+                               is_listen ? ",server" : "");
+        break;
+    case SOCKET_ADDRESS_TYPE_FD:
+        return g_strdup_printf("%sfd:%s%s", prefix, addr->u.fd.str,
+                               is_listen ? ",server" : "");
+        break;
+    case SOCKET_ADDRESS_TYPE_VSOCK:
+        return g_strdup_printf("%svsock:%s:%s", prefix,
+                               addr->u.vsock.cid,
+                               addr->u.vsock.port);
+    default:
+        abort();
+    }
+}
Signature · 1 line
2.17.0

--
Dr. David Alan Gilbert / [email protected] / Manchester, UK

#3 lore raw

Re: [Qemu-devel] [PATCH v8 1/8] qemu-sockets: Export SocketAddress_to_str

In reply to Juan Quintela
Quoted 10 lines · Juan Quintela

Migration code needs that function in hmp.c (so we need to export it), and it needs it on tests/migration-test.c, so we need to move it to a place where it is compiled into the test framework.

---
 chardev/char-socket.c  | 29 -----------------------------
 include/qemu/sockets.h |  3 +++
 util/qemu-sockets.c    | 29 +++++++++++++++++++++++++++++
 3 files changed, 32 insertions(+), 29 deletions(-)

This seems unchanged since my previous objections to this patch in the v7 posting

https://lists.gnu.org/archive/html/qemu-devel/2018-04/msg01879.html

Quoted 94 lines
chardev/char-socket.c +0 -29
index 159e69c3b1..3bbf3a37a0 100644
@@ -382,35 +382,6 @@ static void tcp_chr_free_connection(Chardev *chr)
     s->connected = 0;
 }
 
-static char *SocketAddress_to_str(const char *prefix, SocketAddress *addr,
-                                  bool is_listen, bool is_telnet)
-{
-    switch (addr->type) {
-    case SOCKET_ADDRESS_TYPE_INET:
-        return g_strdup_printf("%s%s:%s:%s%s", prefix,
-                               is_telnet ? "telnet" : "tcp",
-                               addr->u.inet.host,
-                               addr->u.inet.port,
-                               is_listen ? ",server" : "");
-        break;
-    case SOCKET_ADDRESS_TYPE_UNIX:
-        return g_strdup_printf("%sunix:%s%s", prefix,
-                               addr->u.q_unix.path,
-                               is_listen ? ",server" : "");
-        break;
-    case SOCKET_ADDRESS_TYPE_FD:
-        return g_strdup_printf("%sfd:%s%s", prefix, addr->u.fd.str,
-                               is_listen ? ",server" : "");
-        break;
-    case SOCKET_ADDRESS_TYPE_VSOCK:
-        return g_strdup_printf("%svsock:%s:%s", prefix,
-                               addr->u.vsock.cid,
-                               addr->u.vsock.port);
-    default:
-        abort();
-    }
-}
-
 static void update_disconnected_filename(SocketChardev *s)
 {
     Chardev *chr = CHARDEV(s);
include/qemu/sockets.h +3 -0
index 8140fea685..efea0ea850 100644
@@ -110,4 +110,7 @@ SocketAddress *socket_remote_address(int fd, Error **errp);
  */
 SocketAddress *socket_address_flatten(SocketAddressLegacy *addr);
 
+char *SocketAddress_to_str(const char *prefix, SocketAddress *addr,
+                           bool is_listen, bool is_telnet);
+
 #endif /* QEMU_SOCKETS_H */
util/qemu-sockets.c +29 -0
index 8bd8bb64eb..09f04bf76b 100644
@@ -1333,3 +1333,32 @@ SocketAddress *socket_address_flatten(SocketAddressLegacy *addr_legacy)
 
     return addr;
 }
+
+char *SocketAddress_to_str(const char *prefix, SocketAddress *addr,
+                                  bool is_listen, bool is_telnet)
+{
+    switch (addr->type) {
+    case SOCKET_ADDRESS_TYPE_INET:
+        return g_strdup_printf("%s%s:%s:%s%s", prefix,
+                               is_telnet ? "telnet" : "tcp",
+                               addr->u.inet.host,
+                               addr->u.inet.port,
+                               is_listen ? ",server" : "");
+        break;
+    case SOCKET_ADDRESS_TYPE_UNIX:
+        return g_strdup_printf("%sunix:%s%s", prefix,
+                               addr->u.q_unix.path,
+                               is_listen ? ",server" : "");
+        break;
+    case SOCKET_ADDRESS_TYPE_FD:
+        return g_strdup_printf("%sfd:%s%s", prefix, addr->u.fd.str,
+                               is_listen ? ",server" : "");
+        break;
+    case SOCKET_ADDRESS_TYPE_VSOCK:
+        return g_strdup_printf("%svsock:%s:%s", prefix,
+                               addr->u.vsock.cid,
+                               addr->u.vsock.port);
+    default:
+        abort();
+    }
+}
Signature · 1 line
2.17.0

Regards,
Daniel

Signature · 3 lines
|: https://berrange.com      -o-    https://www.flickr.com/photos/dberrange :|
|: https://libvirt.org         -o-            https://fstop138.berrange.com :|
|: https://entangle-photo.org    -o-    https://www.instagram.com/dberrange :|
#4 lore raw

PATCH v8 2/8 tests: Add migration precopy test

In reply to Juan Quintela
---
 tests/migration-test.c | 44 ++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 42 insertions(+), 2 deletions(-)
tests/migration-test.c +42 -2
index 422bf1afdf..834cdf50f2 100644
@@ -524,7 +524,7 @@ static void test_deprecated(void)
     qtest_quit(from);
 }
 
-static void test_migrate(void)
+static void test_postcopy(void)
 {
     char *uri = g_strdup_printf("unix:%s/migsocket", tmpfs);
     QTestState *from, *to;
@@ -595,6 +595,45 @@ static void test_baddest(void)
     test_migrate_end(from, to, false);
 }
 
+static void test_precopy_unix(void)
+{
+    char *uri = g_strdup_printf("unix:%s/migsocket", tmpfs);
+    QTestState *from, *to;
+
+    test_migrate_start(&from, &to, uri, false);
+
+    /* We want to pick a speed slow enough that the test completes
+     * quickly, but that it doesn't complete precopy even on a slow
+     * machine, so also set the downtime.
+     */
+    /* 1 ms should make it not converge*/
+    migrate_set_parameter(from, "downtime-limit", "1");
+    /* 1GB/s */
+    migrate_set_parameter(from, "max-bandwidth", "1000000000");
+
+    /* Wait for the first serial output from the source */
+    wait_for_serial("src_serial");
+
+    migrate(from, uri);
+
+    wait_for_migration_pass(from);
+
+    /* 300 ms should converge */
+    migrate_set_parameter(from, "downtime-limit", "300");
+
+    if (!got_stop) {
+        qtest_qmp_eventwait(from, "STOP");
+    }
+
+    qtest_qmp_eventwait(to, "RESUME");
+
+    wait_for_serial("dest_serial");
+    wait_for_migration_complete(from);
+
+    test_migrate_end(from, to, true);
+    g_free(uri);
+}
+
 int main(int argc, char **argv)
 {
     char template[] = "/tmp/migration-test-XXXXXX";
@@ -614,9 +653,10 @@ int main(int argc, char **argv)
 
     module_call_init(MODULE_INIT_QOM);
 
-    qtest_add_func("/migration/postcopy/unix", test_migrate);
+    qtest_add_func("/migration/postcopy/unix", test_postcopy);
     qtest_add_func("/migration/deprecated", test_deprecated);
     qtest_add_func("/migration/bad_dest", test_baddest);
+    qtest_add_func("/migration/precopy/unix", test_precopy_unix);
 
     ret = g_test_run();
 
Signature · 1 line
2.17.0
#5 lore raw

PATCH v8 3/8 tests: Add migration xbzrle test

In reply to Juan Quintela
---
 tests/migration-test.c | 64 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 64 insertions(+)
tests/migration-test.c +64 -0
index 834cdf50f2..fd885ba909 100644
@@ -512,6 +512,20 @@ static void deprecated_set_speed(QTestState *who, const char *value)
     migrate_check_parameter(who, "max-bandwidth", value);
 }
 
+static void deprecated_set_cache_size(QTestState *who, const char *value)
+{
+    QDict *rsp;
+    gchar *cmd;
+
+    cmd = g_strdup_printf("{ 'execute': 'migrate-set-cache-size',"
+                          "'arguments': { 'value': %s } }", value);
+    rsp = qtest_qmp(who, cmd);
+    g_free(cmd);
+    g_assert(qdict_haskey(rsp, "return"));
+    QDECREF(rsp);
+    migrate_check_parameter(who, "xbzrle-cache-size", value);
+}
+
 static void test_deprecated(void)
 {
     QTestState *from;
@@ -520,6 +534,7 @@ static void test_deprecated(void)
 
     deprecated_set_downtime(from, 0.12345);
     deprecated_set_speed(from, "12345");
+    deprecated_set_cache_size(from, "4096");
 
     qtest_quit(from);
 }
@@ -634,6 +649,54 @@ static void test_precopy_unix(void)
     g_free(uri);
 }
 
+static void test_xbzrle(const char *uri)
+{
+    QTestState *from, *to;
+
+    test_migrate_start(&from, &to, uri, false);
+
+    /* We want to pick a speed slow enough that the test completes
+     * quickly, but that it doesn't complete precopy even on a slow
+     * machine, so also set the downtime.
+     */
+    /* 1 ms should make it not converge*/
+    migrate_set_parameter(from, "downtime-limit", "1");
+    /* 1GB/s */
+    migrate_set_parameter(from, "max-bandwidth", "1000000000");
+
+    migrate_set_parameter(from, "xbzrle-cache-size", "33554432");
+
+    migrate_set_capability(from, "xbzrle", "true");
+    migrate_set_capability(to, "xbzrle", "true");
+    /* Wait for the first serial output from the source */
+    wait_for_serial("src_serial");
+
+    migrate(from, uri);
+
+    wait_for_migration_pass(from);
+
+    /* 300ms should converge */
+    migrate_set_parameter(from, "downtime-limit", "300");
+
+    if (!got_stop) {
+        qtest_qmp_eventwait(from, "STOP");
+    }
+    qtest_qmp_eventwait(to, "RESUME");
+
+    wait_for_serial("dest_serial");
+    wait_for_migration_complete(from);
+
+    test_migrate_end(from, to, true);
+}
+
+static void test_xbzrle_unix(void)
+{
+    char *uri = g_strdup_printf("unix:%s/migsocket", tmpfs);
+
+    test_xbzrle(uri);
+    g_free(uri);
+}
+
 int main(int argc, char **argv)
 {
     char template[] = "/tmp/migration-test-XXXXXX";
@@ -657,6 +720,7 @@ int main(int argc, char **argv)
     qtest_add_func("/migration/deprecated", test_deprecated);
     qtest_add_func("/migration/bad_dest", test_baddest);
     qtest_add_func("/migration/precopy/unix", test_precopy_unix);
+    qtest_add_func("/migration/xbzrle/unix", test_xbzrle_unix);
 
     ret = g_test_run();
 
Signature · 1 line
2.17.0
#6 lore raw

Re: [Qemu-devel] [PATCH v8 3/8] tests: Add migration xbzrle test

Quoted 49 lines · * Juan Quintela ([email protected]) wrote:
---
 tests/migration-test.c | 64 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 64 insertions(+)
tests/migration-test.c +21 -0
index 834cdf50f2..fd885ba909 100644
@@ -512,6 +512,20 @@ static void deprecated_set_speed(QTestState *who, const char *value)
     migrate_check_parameter(who, "max-bandwidth", value);
 }
 
+static void deprecated_set_cache_size(QTestState *who, const char *value)
+{
+    QDict *rsp;
+    gchar *cmd;
+
+    cmd = g_strdup_printf("{ 'execute': 'migrate-set-cache-size',"
+                          "'arguments': { 'value': %s } }", value);
+    rsp = qtest_qmp(who, cmd);
+    g_free(cmd);
+    g_assert(qdict_haskey(rsp, "return"));
+    QDECREF(rsp);
+    migrate_check_parameter(who, "xbzrle-cache-size", value);
+}
+
 static void test_deprecated(void)
 {
     QTestState *from;
@@ -520,6 +534,7 @@ static void test_deprecated(void)
 
     deprecated_set_downtime(from, 0.12345);
     deprecated_set_speed(from, "12345");
+    deprecated_set_cache_size(from, "4096");
 
     qtest_quit(from);
 }
@@ -634,6 +649,54 @@ static void test_precopy_unix(void)
     g_free(uri);
 }
 
+static void test_xbzrle(const char *uri)
+{
+    QTestState *from, *to;
+
+    test_migrate_start(&from, &to, uri, false);
+

tests/migration-test.c static void test_precopy_unix(void) · line 667

Quoted 10 lines
tests/migration-test.c +10 -0
+    /* We want to pick a speed slow enough that the test completes
+     * quickly, but that it doesn't complete precopy even on a slow
+     * machine, so also set the downtime.
+     */
+    /* 1 ms should make it not converge*/
+    migrate_set_parameter(from, "downtime-limit", "1");
+    /* 1GB/s */
+    migrate_set_parameter(from, "max-bandwidth", "1000000000");
+
+    migrate_set_parameter(from, "xbzrle-cache-size", "33554432");

I still worry about the cache size relative to the size of memory we're actually changing in the test; I don't quite understand why it's turning out to get lots of hits.

Also, xbzrle eats so much CPU we'll still have to watch out for the low end CPUs.

Dave

Quoted 45 lines
tests/migration-test.c +32 -0
+    migrate_set_capability(from, "xbzrle", "true");
+    migrate_set_capability(to, "xbzrle", "true");
+    /* Wait for the first serial output from the source */
+    wait_for_serial("src_serial");
+
+    migrate(from, uri);
+
+    wait_for_migration_pass(from);
+
+    /* 300ms should converge */
+    migrate_set_parameter(from, "downtime-limit", "300");
+
+    if (!got_stop) {
+        qtest_qmp_eventwait(from, "STOP");
+    }
+    qtest_qmp_eventwait(to, "RESUME");
+
+    wait_for_serial("dest_serial");
+    wait_for_migration_complete(from);
+
+    test_migrate_end(from, to, true);
+}
+
+static void test_xbzrle_unix(void)
+{
+    char *uri = g_strdup_printf("unix:%s/migsocket", tmpfs);
+
+    test_xbzrle(uri);
+    g_free(uri);
+}
+
 int main(int argc, char **argv)
 {
     char template[] = "/tmp/migration-test-XXXXXX";
@@ -657,6 +720,7 @@ int main(int argc, char **argv)
     qtest_add_func("/migration/deprecated", test_deprecated);
     qtest_add_func("/migration/bad_dest", test_baddest);
     qtest_add_func("/migration/precopy/unix", test_precopy_unix);
+    qtest_add_func("/migration/xbzrle/unix", test_xbzrle_unix);
 
     ret = g_test_run();
 
Signature · 1 line
2.17.0

--
Dr. David Alan Gilbert / [email protected] / Manchester, UK

#7 lore raw

Re: [Qemu-devel] [PATCH v8 3/8] tests: Add migration xbzrle test

Quoted 10 lines · Dr. David Alan Gilbert

Review

Quoted 5 lines · * Juan Quintela ([email protected]) wrote:
(quoted diff) +2 -0
+
+    migrate_set_parameter(from, "xbzrle-cache-size", "33554432");

I still worry about the cache size relative to the size of memory we're actually changing in the test; I don't quite understand why it's turning out to get lots of hits.

I planned this as a smorke test. But what value do you have in mind?

Quoted 2 lines

Also, xbzrle eats so much CPU we'll still have to watch out for the low end CPUs.

Any concrete suggestion?

My plan would have been to push on my next pull request:

Add migration precopy test
Add migration xbzrle test
Migration ppc now inlines its program

And put the rest of the patches with fixes for another review.

Later, Juan.

#8 lore raw

Re: [Qemu-devel] [PATCH v8 3/8] tests: Add migration xbzrle test

Quoted 5 lines · * Juan Quintela ([email protected]) wrote:
Quoted 3 lines · Dr. David Alan Gilbert
Quoted 2 lines · * Juan Quintela ([email protected]) wrote:
Quoted 8 lines
Quoted 6 lines

Review

Quoted 2 lines
(quoted diff) +2 -0
+
+    migrate_set_parameter(from, "xbzrle-cache-size", "33554432");

I still worry about the cache size relative to the size of memory we're actually changing in the test; I don't quite understand why it's turning out to get lots of hits.

I planned this as a smorke test. But what value do you have in mind?

Given the test code dirties 100MB of RAM, I suggest a cache of 110MB say. But it's interesting that the stats show we are getting a lot of page hits; I'm not sure I understand why.

Quoted 5 lines
Quoted 2 lines

Also, xbzrle eats so much CPU we'll still have to watch out for the low end CPUs.

Any concrete suggestion?

Quoted 7 lines

My plan would have been to push on my next pull request:

Add migration precopy test
Add migration xbzrle test
Migration ppc now inlines its program

And put the rest of the patches with fixes for another review.

Go with it and lets see; if we hit problems then we can just turn that 300ms downtime limit right up.

Dave

Quoted 2 lines

Later, Juan.

--
Dr. David Alan Gilbert / [email protected] / Manchester, UK

#9 lore raw

PATCH v8 4/8 migration: Create socket-address parameter

In reply to Juan Quintela

It will be used to store the uri parameters. We want this only for tcp, so we don't set it for other uris. We need it to know what port is migration running.

--

This used to be uri parameter, but it has so many troubles to reproduce that it don't just make sense.

This used to be a port parameter. I was asked to move to SocketAddress, done.
I also merged the setting of the migration tcp port in this one because now I need to free the address, and this makes it easier. This used to be x-socket-address with a single direction, now it is a list of addresses.

---
 hmp.c                 | 14 ++++++++++++++
 migration/migration.c | 25 +++++++++++++++++++++++++
 migration/migration.h |  1 +
 migration/socket.c    | 11 +++++++++++
 qapi/migration.json   | 13 +++++++++++--
 qapi/sockets.json     | 13 +++++++++++++
 6 files changed, 75 insertions(+), 2 deletions(-)
hmp.c +14 -0
index a25c7bd9a8..caf94345c9 100644
@@ -355,6 +355,20 @@ void hmp_info_migrate_parameters(Monitor *mon, const QDict *qdict)
         monitor_printf(mon, "%s: %" PRIu64 "\n",
             MigrationParameter_str(MIGRATION_PARAMETER_XBZRLE_CACHE_SIZE),
             params->xbzrle_cache_size);
+        if (params->has_socket_address) {
+            SocketAddressList *addr;
+
+            monitor_printf(mon, "%s: [\n",
+                MigrationParameter_str(MIGRATION_PARAMETER_SOCKET_ADDRESS));
+
+            for (addr = params->socket_address; addr; addr = addr->next) {
+                char *s = SocketAddress_to_str("", addr->value,
+                                               false, false);
+                monitor_printf(mon, "\t%s\n", s);
+            }
+
+            monitor_printf(mon, "]\n");
+        }
     }
 
     qapi_free_MigrationParameters(params);
migration/migration.c +25 -0
index 52a5092add..7eca65d1f0 100644
@@ -31,6 +31,8 @@
 #include "migration/vmstate.h"
 #include "block/block.h"
 #include "qapi/error.h"
+#include "qapi/clone-visitor.h"
+#include "qapi/qapi-visit-sockets.h"
 #include "qapi/qapi-commands-migration.h"
 #include "qapi/qapi-events-migration.h"
 #include "qapi/qmp/qerror.h"
@@ -277,6 +279,21 @@ int migrate_send_rp_req_pages(MigrationIncomingState *mis, const char *rbname,
     return migrate_send_rp_message(mis, msg_type, msglen, bufc);
 }
 
+void migrate_set_address(SocketAddress *address)
+{
+    MigrationState *s = migrate_get_current();
+    SocketAddressList *addrs;
+
+    addrs = g_new0(SocketAddressList, 1);
+    addrs->next = s->parameters.socket_address;
+    s->parameters.socket_address = addrs;
+
+    if (!s->parameters.has_socket_address) {
+        s->parameters.has_socket_address = true;
+    }
+    addrs->value = QAPI_CLONE(SocketAddress, address);
+}
+
 void qemu_start_incoming_migration(const char *uri, Error **errp)
 {
     const char *p;
@@ -556,6 +573,11 @@ MigrationParameters *qmp_query_migrate_parameters(Error **errp)
     params->x_multifd_page_count = s->parameters.x_multifd_page_count;
     params->has_xbzrle_cache_size = true;
     params->xbzrle_cache_size = s->parameters.xbzrle_cache_size;
+    if (s->parameters.socket_address) {
+        params->has_socket_address = true;
+        params->socket_address =
+            QAPI_CLONE(SocketAddressList, s->parameters.socket_address);
+    }
 
     return params;
 }
@@ -2563,6 +2585,9 @@ static void migration_instance_finalize(Object *obj)
     qemu_mutex_destroy(&ms->error_mutex);
     g_free(params->tls_hostname);
     g_free(params->tls_creds);
+    if (params->socket_address) {
+        qapi_free_SocketAddressList(params->socket_address);
+    }
     qemu_sem_destroy(&ms->pause_sem);
     error_free(ms->error);
 }
migration/migration.h +1 -0
index 8d2f320c48..4774ee305f 100644
@@ -241,5 +241,6 @@ int migrate_send_rp_req_pages(MigrationIncomingState *mis, const char* rbname,
 
 void dirty_bitmap_mig_before_vm_start(void);
 void init_dirty_bitmap_incoming_migration(void);
+void migrate_set_address(SocketAddress *address);
 
 #endif
migration/socket.c +11 -0
index 122d8ccfbe..edf33c70cf 100644
@@ -15,6 +15,7 @@
  */
 
 #include "qemu/osdep.h"
+#include "qemu/cutils.h"
 
 #include "qemu-common.h"
 #include "qemu/error-report.h"
@@ -152,6 +153,7 @@ static void socket_start_incoming_migration(SocketAddress *saddr,
                                             Error **errp)
 {
     QIONetListener *listener = qio_net_listener_new();
+    int i;
 
     qio_net_listener_set_name(listener, "migration-socket-listener");
 
@@ -163,6 +165,15 @@ static void socket_start_incoming_migration(SocketAddress *saddr,
     qio_net_listener_set_client_func(listener,
                                      socket_accept_incoming_migration,
                                      NULL, NULL);
+
+    for (i = 0; i < listener->nsioc; i++)  {
+        SocketAddress *address =
+            qio_channel_socket_get_local_address(listener->sioc[i], errp);
+        if (address < 0) {
+            return;
+        }
+        migrate_set_address(address);
+    }
 }
 
 void tcp_start_incoming_migration(const char *host_port, Error **errp)
qapi/migration.json +11 -2
index 9d0bf82cf4..c3aafaf8fe 100644
@@ -6,6 +6,7 @@
 ##
 
 { 'include': 'common.json' }
+{ 'include': 'sockets.json' }
 
 ##
 # @MigrationStats:
@@ -494,6 +495,9 @@
 #                     and a power of 2
 #                     (Since 2.11)
 #
+# @socket-address: Only used for tcp, to know what the real port is
+#                  (Since 2.13)
+#
 # Since: 2.4
 ##
 { 'enum': 'MigrationParameter',
@@ -502,7 +506,7 @@
            'tls-creds', 'tls-hostname', 'max-bandwidth',
            'downtime-limit', 'x-checkpoint-delay', 'block-incremental',
            'x-multifd-channels', 'x-multifd-page-count',
-           'xbzrle-cache-size' ] }
+           'xbzrle-cache-size', 'socket-address' ] }
 
 ##
 # @MigrateSetParameters:
@@ -671,6 +675,10 @@
 #                     needs to be a multiple of the target page size
 #                     and a power of 2
 #                     (Since 2.11)
+#
+# @socket-address: Only used for tcp, to know what the real port is
+#                  (Since 2.13)
+#
 # Since: 2.4
 ##
 { 'struct': 'MigrationParameters',
@@ -687,7 +695,8 @@
             '*block-incremental': 'bool' ,
             '*x-multifd-channels': 'uint8',
             '*x-multifd-page-count': 'uint32',
-            '*xbzrle-cache-size': 'size' } }
+            '*xbzrle-cache-size': 'size',
+            '*socket-address': ['SocketAddress'] } }
 
 ##
 # @query-migrate-parameters:
qapi/sockets.json +13 -0
index fc81d8d5e8..f1ca09a927 100644
@@ -152,3 +152,16 @@
             'unix': 'UnixSocketAddress',
             'vsock': 'VsockSocketAddress',
             'fd': 'String' } }
+
+##
+# @DummyStruct:
+#
+# Both block-core and migration needs SocketAddressList
+# I am open to comments about how to share it
+#
+# @dummy-list: A dummy list
+#
+# Since: 2.13
+##
+{ 'struct': 'DummyStruct',
+  'data': { 'dummy-list': ['SocketAddress'] } }
Signature · 1 line
2.17.0
#10 lore raw

PATCH v8 5/8 tests: Migration ppc now inlines its program

In reply to Juan Quintela

No need to write it to a file. Just need a proper firmware O:-)

---
 tests/migration-test.c | 41 +++++------------------------------------
 1 file changed, 5 insertions(+), 36 deletions(-)
tests/migration-test.c +5 -36
index fd885ba909..4a94d3d598 100644
@@ -19,9 +19,6 @@
 #include "qemu/sockets.h"
 #include "chardev/char.h"
 #include "sysemu/sysemu.h"
-#include "hw/nvram/chrp_nvram.h"
-
-#define MIN_NVRAM_SIZE 8192 /* from spapr_nvram.c */
 
 const unsigned start_address = 1024 * 1024;
 const unsigned end_address = 100 * 1024 * 1024;
@@ -90,36 +87,6 @@ static void init_bootfile_x86(const char *bootpath)
     fclose(bootfile);
 }
 
-static void init_bootfile_ppc(const char *bootpath)
-{
-    FILE *bootfile;
-    char buf[MIN_NVRAM_SIZE];
-    ChrpNvramPartHdr *header = (ChrpNvramPartHdr *)buf;
-
-    memset(buf, 0, MIN_NVRAM_SIZE);
-
-    /* Create a "common" partition in nvram to store boot-command property */
-
-    header->signature = CHRP_NVPART_SYSTEM;
-    memcpy(header->name, "common", 6);
-    chrp_nvram_finish_partition(header, MIN_NVRAM_SIZE);
-
-    /* FW_MAX_SIZE is 4MB, but slof.bin is only 900KB,
-     * so let's modify memory between 1MB and 100MB
-     * to do like PC bootsector
-     */
-
-    sprintf(buf + 16,
-            "boot-command=hex .\" _\" begin %x %x do i c@ 1 + i c! 1000 +loop "
-            ".\" B\" 0 until", end_address, start_address);
-
-    /* Write partition to the NVRAM file */
-
-    bootfile = fopen(bootpath, "wb");
-    g_assert_cmpint(fwrite(buf, MIN_NVRAM_SIZE, 1, bootfile), ==, 1);
-    fclose(bootfile);
-}
-
 /*
  * Wait for some output in the serial output file,
  * we get an 'A' followed by an endless string of 'B's
@@ -410,12 +377,14 @@ static void test_migrate_start(QTestState **from, QTestState **to,
         if (access("/sys/module/kvm_hv", F_OK)) {
             accel = "tcg";
         }
-        init_bootfile_ppc(bootpath);
         cmd_src = g_strdup_printf("-machine accel=%s -m 256M"
                                   " -name source,debug-threads=on"
                                   " -serial file:%s/src_serial"
-                                  " -drive file=%s,if=pflash,format=raw",
-                                  accel, tmpfs, bootpath);
+                                  " -prom-env '"
+                                  "boot-command=hex .\" _\" begin %x %x "
+                                  "do i c@ 1 + i c! 1000 +loop .\" B\" 0 "
+                                  "until'",  accel, tmpfs, end_address,
+                                  start_address);
         cmd_dst = g_strdup_printf("-machine accel=%s -m 256M"
                                   " -name target,debug-threads=on"
                                   " -serial file:%s/dest_serial"
Signature · 1 line
2.17.0
Reviewed-by on v8 5/8
#12 lore raw

Re: [Qemu-devel] [PATCH v8 5/8] tests: Migration ppc now inlines its program

In reply to Juan Quintela
Quoted 7 lines · Juan Quintela

No need to write it to a file. Just need a proper firmware O:-)

---
 tests/migration-test.c | 41 +++++------------------------------------
 1 file changed, 5 insertions(+), 36 deletions(-)
#13 lore raw

PATCH v8 6/8 tests: Add basic migration precopy tcp test

In reply to Juan Quintela

Not sharing code from precopy/unix because we have to read back the tcp parameter.

---
 tests/migration-test.c | 83 ++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 80 insertions(+), 3 deletions(-)
tests/migration-test.c +80 -3
index 4a94d3d598..309ae4793e 100644
@@ -19,6 +19,9 @@
 #include "qemu/sockets.h"
 #include "chardev/char.h"
 #include "sysemu/sysemu.h"
+#include "qapi/qapi-visit-sockets.h"
+#include "qapi/qobject-input-visitor.h"
+#include "qapi/qobject-output-visitor.h"
 
 const unsigned start_address = 1024 * 1024;
 const unsigned end_address = 100 * 1024 * 1024;
@@ -277,8 +280,32 @@ static void cleanup(const char *filename)
     g_free(path);
 }
 
-static void migrate_check_parameter(QTestState *who, const char *parameter,
-                                    const char *value)
+static char *migrate_get_socket_address(QTestState *who, const char *parameter)
+{
+    QDict *rsp, *rsp_return;
+    char *result;
+    Error *local_err = NULL;
+    SocketAddressList *addrs;
+    Visitor *iv = NULL;
+    QObject *object;
+
+    rsp = wait_command(who, "{ 'execute': 'query-migrate-parameters' }");
+    rsp_return = qdict_get_qdict(rsp, "return");
+    object = qdict_get(rsp_return, parameter);
+
+    iv = qobject_input_visitor_new(object);
+    visit_type_SocketAddressList(iv, NULL, &addrs, &local_err);
+
+    /* we are only using a single address */
+    result = g_strdup_printf("%s", SocketAddress_to_str("", addrs->value,
+                                                        false, false));
+
+    qapi_free_SocketAddressList(addrs);
+    QDECREF(rsp);
+    return result;
+}
+
+static char *migrate_get_parameter(QTestState *who, const char *parameter)
 {
     QDict *rsp, *rsp_return;
     char *result;
@@ -287,9 +314,18 @@ static void migrate_check_parameter(QTestState *who, const char *parameter,
     rsp_return = qdict_get_qdict(rsp, "return");
     result = g_strdup_printf("%" PRId64,
                              qdict_get_try_int(rsp_return,  parameter, -1));
+    QDECREF(rsp);
+    return result;
+}
+
+static void migrate_check_parameter(QTestState *who, const char *parameter,
+                                    const char *value)
+{
+    char *result;
+
+    result = migrate_get_parameter(who, parameter);
     g_assert_cmpstr(result, ==, value);
     g_free(result);
-    QDECREF(rsp);
 }
 
 static void migrate_set_parameter(QTestState *who, const char *parameter,
@@ -666,6 +702,46 @@ static void test_xbzrle_unix(void)
     g_free(uri);
 }
 
+static void test_precopy_tcp(void)
+{
+    char *uri;
+    QTestState *from, *to;
+
+    test_migrate_start(&from, &to, "tcp:127.0.0.1:0", false);
+
+    /* We want to pick a speed slow enough that the test completes
+     * quickly, but that it doesn't complete precopy even on a slow
+     * machine, so also set the downtime.
+     */
+    /* 1 ms should make it not converge*/
+    migrate_set_parameter(from, "downtime-limit", "1");
+    /* 1GB/s */
+    migrate_set_parameter(from, "max-bandwidth", "1000000000");
+
+    /* Wait for the first serial output from the source */
+    wait_for_serial("src_serial");
+
+    uri = migrate_get_socket_address(to, "socket-address");
+
+    migrate(from, uri);
+
+    wait_for_migration_pass(from);
+
+    /* 300ms should converge */
+    migrate_set_parameter(from, "downtime-limit", "300");
+
+    if (!got_stop) {
+        qtest_qmp_eventwait(from, "STOP");
+    }
+    qtest_qmp_eventwait(to, "RESUME");
+
+    wait_for_serial("dest_serial");
+    wait_for_migration_complete(from);
+
+    test_migrate_end(from, to, true);
+    g_free(uri);
+}
+
 int main(int argc, char **argv)
 {
     char template[] = "/tmp/migration-test-XXXXXX";
@@ -689,6 +765,7 @@ int main(int argc, char **argv)
     qtest_add_func("/migration/deprecated", test_deprecated);
     qtest_add_func("/migration/bad_dest", test_baddest);
     qtest_add_func("/migration/precopy/unix", test_precopy_unix);
+    qtest_add_func("/migration/precopy/tcp", test_precopy_tcp);
     qtest_add_func("/migration/xbzrle/unix", test_xbzrle_unix);
 
     ret = g_test_run();
Signature · 1 line
2.17.0
#14 lore raw

PATCH v8 7/8 migration: Add multifd test

In reply to Juan Quintela

We set the x-multifd-page-count and x-multifd-channels.

---
 tests/migration-test.c | 48 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 48 insertions(+)
tests/migration-test.c +48 -0
index 309ae4793e..873bb58200 100644
@@ -742,6 +742,53 @@ static void test_precopy_tcp(void)
     g_free(uri);
 }
 
+static void test_multifd_tcp(void)
+{
+    char *uri;
+    QTestState *from, *to;
+
+    test_migrate_start(&from, &to, "tcp:127.0.0.1:0", false);
+
+    /* We want to pick a speed slow enough that the test completes
+     * quickly, but that it doesn't complete precopy even on a slow
+     * machine, so also set the downtime.
+     */
+    /* 1 ms should make it not converge*/
+    migrate_set_parameter(from, "downtime-limit", "1");
+    /* 1GB/s */
+    migrate_set_parameter(from, "max-bandwidth", "1000000000");
+
+    migrate_set_parameter(from, "x-multifd-channels", "4");
+    migrate_set_parameter(to, "x-multifd-channels", "4");
+
+    migrate_set_parameter(from, "x-multifd-page-count", "64");
+    migrate_set_parameter(to, "x-multifd-page-count", "64");
+
+    migrate_set_capability(from, "x-multifd", "true");
+    migrate_set_capability(to, "x-multifd", "true");
+    /* Wait for the first serial output from the source */
+    wait_for_serial("src_serial");
+
+    uri = migrate_get_socket_address(to, "socket-address");
+
+    migrate(from, uri);
+
+    wait_for_migration_pass(from);
+
+    /* 300ms it should converge */
+    migrate_set_parameter(from, "downtime-limit", "300");
+
+    if (!got_stop) {
+        qtest_qmp_eventwait(from, "STOP");
+    }
+    qtest_qmp_eventwait(to, "RESUME");
+
+    wait_for_serial("dest_serial");
+    wait_for_migration_complete(from);
+
+    test_migrate_end(from, to, true);
+}
+
 int main(int argc, char **argv)
 {
     char template[] = "/tmp/migration-test-XXXXXX";
@@ -767,6 +814,7 @@ int main(int argc, char **argv)
     qtest_add_func("/migration/precopy/unix", test_precopy_unix);
     qtest_add_func("/migration/precopy/tcp", test_precopy_tcp);
     qtest_add_func("/migration/xbzrle/unix", test_xbzrle_unix);
+    qtest_add_func("/migration/multifd/tcp", test_multifd_tcp);
 
     ret = g_test_run();
 
Signature · 1 line
2.17.0
#15 lore raw

PATCH v8 8/8 tests: Add migration compress threads tests

In reply to Juan Quintela

Yeap, it is still not working. trying to learn how to debug threads for guests running from the testt hardness.

For some reason, compression is not working at the moment, test is disabled until I found why.

---
 tests/migration-test.c | 52 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 52 insertions(+)
tests/migration-test.c +52 -0
index 873bb58200..cf6cec11ef 100644
@@ -789,6 +789,55 @@ static void test_multifd_tcp(void)
     test_migrate_end(from, to, true);
 }
 
+static void test_compress(const char *uri)
+{
+    QTestState *from, *to;
+
+    test_migrate_start(&from, &to, uri, false);
+
+    /* We want to pick a speed slow enough that the test completes
+     * quickly, but that it doesn't complete precopy even on a slow
+     * machine, so also set the downtime.
+     */
+    /* 1 ms should make it not converge*/
+    migrate_set_parameter(from, "downtime-limit", "1");
+    /* 1GB/s */
+    migrate_set_parameter(from, "max-bandwidth", "1000000000");
+
+    migrate_set_parameter(from, "compress-threads", "4");
+    migrate_set_parameter(to, "decompress-threads", "3");
+
+    migrate_set_capability(from, "compress", "true");
+    migrate_set_capability(to, "compress", "true");
+    /* Wait for the first serial output from the source */
+    wait_for_serial("src_serial");
+
+    migrate(from, uri);
+
+    wait_for_migration_pass(from);
+
+    /* 300ms it should converge */
+    migrate_set_parameter(from, "downtime-limit", "300");
+
+    if (!got_stop) {
+        qtest_qmp_eventwait(from, "STOP");
+    }
+    qtest_qmp_eventwait(to, "RESUME");
+
+    wait_for_serial("dest_serial");
+    wait_for_migration_complete(from);
+
+    test_migrate_end(from, to, true);
+}
+
+static void test_compress_unix(void)
+{
+    char *uri = g_strdup_printf("unix:%s/migsocket", tmpfs);
+
+    test_compress(uri);
+    g_free(uri);
+}
+
 int main(int argc, char **argv)
 {
     char template[] = "/tmp/migration-test-XXXXXX";
@@ -815,6 +864,9 @@ int main(int argc, char **argv)
     qtest_add_func("/migration/precopy/tcp", test_precopy_tcp);
     qtest_add_func("/migration/xbzrle/unix", test_xbzrle_unix);
     qtest_add_func("/migration/multifd/tcp", test_multifd_tcp);
+    if (0) {
+        qtest_add_func("/migration/compress/unix", test_compress_unix);
+    }
 
     ret = g_test_run();
 
Signature · 1 line
2.17.0