arm64: dts: lx2160a: add sata node support
Subsystems (2)
PATCH v2 1/1 arm64: dts: lx2160a: add sata node support
Add sata node support and Enable sata support
Signed-off-by Peng Ma <[email protected]>
---
changed for V2:
- put the 'status' at the end of property list
- add lx2160aqds sata support
arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts | 16 +++++++ arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts | 16 +++++++ arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 44 +++++++++++++++++++++ 3 files changed, 76 insertions(+), 0 deletions(-)
arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts +16 -0
@@ -110,3 +110,19 @@ &usb1 { status = "okay"; }; + +&sata0 { + status = "okay"; +}; + +&sata1 { + status = "okay"; +}; + +&sata2 { + status = "okay"; +}; + +&sata3 { + status = "okay"; +};
arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts +16 -0
@@ -117,3 +117,19 @@ &usb1 { status = "okay"; }; + +&sata0 { + status = "okay"; +}; + +&sata1 { + status = "okay"; +}; + +&sata2 { + status = "okay"; +}; + +&sata3 { + status = "okay"; +};
arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi +44 -0
49 lines not on this page · raw message
Signature · 1 line
1.7.1
Quoted 1 line · Peng Ma
Add sata node support and Enable sata support
I would suggest you reword the commit log like below:
Add SATA device nodes for fsl-lx2160a and enable support for QDS and RDB boards.
Quoted 17 lines
Signed-off-by Peng Ma <[email protected]>---
changed for V2:
- put the 'status' at the end of property list
- add lx2160aqds sata supportarch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts | 16 +++++++ arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts | 16 +++++++ arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 44 +++++++++++++++++++++ 3 files changed, 76 insertions(+), 0 deletions(-)arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts +0
-0
arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts line 114
Quoted 5 lines
arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts +2
-0@@ -110,3 +110,19 @@ &usb1 { status = "okay"; }; + +&sata0 {
Please sort the labeling nodes alphabetically.
Shawn
Quoted 43 lines
arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts +14
-0+ status = "okay"; +}; + +&sata1 { + status = "okay"; +}; + +&sata2 { + status = "okay"; +}; + +&sata3 { + status = "okay"; +};arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts +16
-0@@ -117,3 +117,19 @@ &usb1 { status = "okay"; }; + +&sata0 { + status = "okay"; +}; + +&sata1 { + status = "okay"; +}; + +&sata2 { + status = "okay"; +}; + +&sata3 { + status = "okay"; +};arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi +0
-0
arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi line 766
Quoted 5 lines
arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi +2
-0@@ -762,5 +762,49 @@ <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>; dma-coherent; }; + + sata0: sata@3200000 {
Please sort nodes with unit-address in order of the address.
Shawn
Quoted 47 lines
arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi +42
-0+ compatible = "fsl,lx2160a-ahci"; + reg = <0x0 0x3200000 0x0 0x10000>, + <0x7 0x100520 0x0 0x4>; + reg-names = "ahci", "sata-ecc"; + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 3>; + dma-coherent; + status = "disabled"; + }; + + sata1: sata@3210000 { + compatible = "fsl,lx2160a-ahci"; + reg = <0x0 0x3210000 0x0 0x10000>, + <0x7 0x100520 0x0 0x4>; + reg-names = "ahci", "sata-ecc"; + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 3>; + dma-coherent; + status = "disabled"; + }; + + sata2: sata@3220000 { + compatible = "fsl,lx2160a-ahci"; + reg = <0x0 0x3220000 0x0 0x10000>, + <0x7 0x100520 0x0 0x4>; + reg-names = "ahci", "sata-ecc"; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 3>; + dma-coherent; + status = "disabled"; + }; + + sata3: sata@3230000 { + compatible = "fsl,lx2160a-ahci"; + reg = <0x0 0x3230000 0x0 0x10000>, + <0x7 0x100520 0x0 0x4>; + reg-names = "ahci", "sata-ecc"; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 3>; + dma-coherent; + status = "disabled"; + }; }; };Signature · 1 line
1.7.1