arm64: dts: lx2160a: add sata node support
Subsystems (3)
PATCH v4 1/1 arm64: dts: lx2160a: add sata node support
Add SATA device nodes for fsl-lx2160a and enable support for QDS and RDB boards.
---
changed for V4:
- no change
arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts | 16 +++++++ arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts | 16 +++++++ arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 44 +++++++++++++++++++++ 3 files changed, 76 insertions(+), 0 deletions(-)
arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts +16 -0
@@ -95,6 +95,22 @@ }; }; +&sata0 { + status = "okay"; +}; + +&sata1 { + status = "okay"; +}; + +&sata2 { + status = "okay"; +}; + +&sata3 { + status = "okay"; +}; + &uart0 { status = "okay"; };
arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts +16 -0
@@ -102,6 +102,22 @@ }; }; +&sata0 { + status = "okay"; +}; + +&sata1 { + status = "okay"; +}; + +&sata2 { + status = "okay"; +}; + +&sata3 { + status = "okay"; +}; + &uart0 { status = "okay"; };
arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi +44 -0
50 lines not on this page · raw message
Signature · 1 line
1.7.1
PATCH v4 1/1 dt-bindings: ahci-fsl-qoriq: add lx2160a chip name to the list
Add lxx2160a compatible to bindings documentation.
---
changed for V4:
- add lx2160a compatible to bindings doc
.../devicetree/bindings/ata/ahci-fsl-qoriq.txt | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
Documentation/devicetree/bindings/ata/ahci-fsl-qoriq.txt +1 -1
@@ -3,7 +3,7 @@ Binding for Freescale QorIQ AHCI SATA Controller Required properties: - reg: Physical base address and size of the controller's register area. - compatible: Compatibility string. Must be 'fsl,<chip>-ahci', where - chip could be ls1021a, ls1043a, ls1046a, ls1088a, ls2080a etc. + chip could be ls1021a, ls1043a, ls1046a, ls1088a, ls2080a, lx2160a, etc. - clocks: Input clock specifier. Refer to common clock bindings. - interrupts: Interrupt specifier. Refer to interrupt binding.
Signature · 1 line
1.7.1
Re: [v4] dt-bindings: ahci-fsl-qoriq: add lx2160a chip name to the list
Hello!
Quoted 1 line · Peng Ma
Add lxx2160a compatible to bindings documentation.
lx2160a?
Quoted 13 lines
Signed-off-by Peng Ma <[email protected]>---
changed for V4:
- add lx2160a compatible to bindings doc.../devicetree/bindings/ata/ahci-fsl-qoriq.txt | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)Documentation/devicetree/bindings/ata/ahci-fsl-qoriq.txt +0
-0
Documentation/devicetree/bindings/ata/ahci-fsl-qoriq.txt Binding for Freescale QorIQ AHCI SATA Controller · line 9
Quoted 8 lines
Documentation/devicetree/bindings/ata/ahci-fsl-qoriq.txt +1
-1@@ -3,7 +3,7 @@ Binding for Freescale QorIQ AHCI SATA Controller Required properties: - reg: Physical base address and size of the controller's register area. - compatible: Compatibility string. Must be 'fsl,<chip>-ahci', where - chip could be ls1021a, ls1043a, ls1046a, ls1088a, ls2080a etc. + chip could be ls1021a, ls1043a, ls1046a, ls1088a, ls2080a, lx2160a, etc. - clocks: Input clock specifier. Refer to common clock bindings. - interrupts: Interrupt specifier. Refer to interrupt binding.
MBR, Sergei
RE: [v4] dt-bindings: ahci-fsl-qoriq: add lx2160a chip name to the list
Quoted 12 lines
-----Original Message-----
From: Sergei Shtylyov <[email protected]>
Sent: 2019年1月25日 15:46
To: Peng Ma <[email protected]>; [email protected]; [email protected]
Cc: [email protected]; [email protected]; Leo Li <[email protected]>; [email protected]; [email protected]; [email protected]; [email protected]; Andy Tang <[email protected]>
Subject: Re: [v4] dt-bindings: ahci-fsl-qoriq: add lx2160a chip name to the list
Quoted 8 lines
Hello!
Quoted 1 line · Peng Ma
Add lxx2160a compatible to bindings documentation.
lx2160a?
[Peng Ma]
Yes, it is should be lx2160a, thanks very much.
I will change it as soon as possible.
Best Regards,
Peng
Quoted 10 lines
Review
Quoted 9 lines
Signed-off-by Peng Ma <[email protected]>---
changed for V4:
- add lx2160a compatible to bindings doc.../devicetree/bindings/ata/ahci-fsl-qoriq.txt | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)(quoted diff) +0
-0
b/Documentation/devicetree/bindings/ata/ahci-fsl-qoriq.txt
Quoted 14 lines
Documentation/devicetree/bindings/ata/ahci-fsl-qoriq.txt Binding for Freescale QorIQ AHCI SATA Controller · line 9
Quoted 12 lines
index 7c3ca0e..9ecc019 100644
Documentation/devicetree/bindings/ata/ahci-fsl-qoriq.txt +1
-1@@ -3,7 +3,7 @@ Binding for Freescale QorIQ AHCI SATA Controller Required properties: - reg: Physical base address and size of the controller's register area. - compatible: Compatibility string. Must be 'fsl,<chip>-ahci', where - chip could be ls1021a, ls1043a, ls1046a, ls1088a, ls2080a etc. + chip could be ls1021a, ls1043a, ls1046a, ls1088a, ls2080a, lx2160a, etc. - clocks: Input clock specifier. Refer to common clock bindings. - interrupts: Interrupt specifier. Refer to interrupt binding.MBR, Sergei
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel