Skip to contentSkip to conversation

arm64: dts: lx2160a: add sata node support

PATCH New Peng Ma 2 participants 4 messages Jan 25, 2019

Subsystems (3)
lore
Share & tools
lore

Peng Ma

author
#0 lore raw

PATCH v4 1/1 arm64: dts: lx2160a: add sata node support

Add SATA device nodes for fsl-lx2160a and enable support for QDS and RDB boards.

---
changed for V4:
- no change

 arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts |   16 +++++++
 arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts |   16 +++++++
 arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi    |   44 +++++++++++++++++++++
 3 files changed, 76 insertions(+), 0 deletions(-)
arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts +16 -0
index 99a22ab..1a5acf6 100644
@@ -95,6 +95,22 @@
 	};
 };
 
+&sata0 {
+	status = "okay";
+};
+
+&sata1 {
+	status = "okay";
+};
+
+&sata2 {
+	status = "okay";
+};
+
+&sata3 {
+	status = "okay";
+};
+
 &uart0 {
 	status = "okay";
 };
arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts +16 -0
index 6481e5f..5b6799e 100644
@@ -102,6 +102,22 @@
 	};
 };
 
+&sata0 {
+	status = "okay";
+};
+
+&sata1 {
+	status = "okay";
+};
+
+&sata2 {
+	status = "okay";
+};
+
+&sata3 {
+	status = "okay";
+};
+
 &uart0 {
 	status = "okay";
 };
arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi +44 -0

50 lines not on this page · raw message

Signature · 1 line
1.7.1
author
#1 lore raw

PATCH v4 1/1 dt-bindings: ahci-fsl-qoriq: add lx2160a chip name to the list

Add lxx2160a compatible to bindings documentation.

---
changed for V4:
- add lx2160a compatible to bindings doc

 .../devicetree/bindings/ata/ahci-fsl-qoriq.txt     |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
Documentation/devicetree/bindings/ata/ahci-fsl-qoriq.txt +1 -1
index 7c3ca0e..9ecc019 100644
@@ -3,7 +3,7 @@ Binding for Freescale QorIQ AHCI SATA Controller
 Required properties:
   - reg: Physical base address and size of the controller's register area.
   - compatible: Compatibility string. Must be 'fsl,<chip>-ahci', where
-    chip could be ls1021a, ls1043a, ls1046a, ls1088a, ls2080a etc.
+    chip could be ls1021a, ls1043a, ls1046a, ls1088a, ls2080a, lx2160a, etc.
   - clocks: Input clock specifier. Refer to common clock bindings.
   - interrupts: Interrupt specifier. Refer to interrupt binding.
 
Signature · 1 line
1.7.1
#2 lore raw

Re: [v4] dt-bindings: ahci-fsl-qoriq: add lx2160a chip name to the list

Hello!

Quoted 1 line · Peng Ma

Add lxx2160a compatible to bindings documentation.

lx2160a?

Quoted 13 lines

---
changed for V4:
- add lx2160a compatible to bindings doc

  .../devicetree/bindings/ata/ahci-fsl-qoriq.txt     |    2 +-
  1 files changed, 1 insertions(+), 1 deletions(-)
Documentation/devicetree/bindings/ata/ahci-fsl-qoriq.txt +0 -0
index 7c3ca0e..9ecc019 100644

Documentation/devicetree/bindings/ata/ahci-fsl-qoriq.txt Binding for Freescale QorIQ AHCI SATA Controller · line 9

Quoted 8 lines
Documentation/devicetree/bindings/ata/ahci-fsl-qoriq.txt +1 -1
@@ -3,7 +3,7 @@ Binding for Freescale QorIQ AHCI SATA Controller
  Required properties:
    - reg: Physical base address and size of the controller's register area.
    - compatible: Compatibility string. Must be 'fsl,<chip>-ahci', where
-    chip could be ls1021a, ls1043a, ls1046a, ls1088a, ls2080a etc.
+    chip could be ls1021a, ls1043a, ls1046a, ls1088a, ls2080a, lx2160a, etc.
    - clocks: Input clock specifier. Refer to common clock bindings.
    - interrupts: Interrupt specifier. Refer to interrupt binding.
 

MBR, Sergei

author
#3 lore raw

RE: [v4] dt-bindings: ahci-fsl-qoriq: add lx2160a chip name to the list

Quoted 12 lines

-----Original Message-----
From: Sergei Shtylyov <[email protected]>
Sent: 2019年1月25日 15:46
To: Peng Ma <[email protected]>; [email protected]; [email protected]
Cc: [email protected]; [email protected]; Leo Li <[email protected]>; [email protected]; [email protected]; [email protected]; [email protected]; Andy Tang <[email protected]>
Subject: Re: [v4] dt-bindings: ahci-fsl-qoriq: add lx2160a chip name to the list

Quoted 8 lines

Hello!

Quoted 1 line · Peng Ma

Add lxx2160a compatible to bindings documentation.

   lx2160a?

[Peng Ma]
Yes, it is should be lx2160a, thanks very much.
I will change it as soon as possible.
Best Regards,
Peng

Quoted 10 lines

Review

Quoted 9 lines

---
changed for V4:
- add lx2160a compatible to bindings doc

  .../devicetree/bindings/ata/ahci-fsl-qoriq.txt     |    2 +-
  1 files changed, 1 insertions(+), 1 deletions(-)
(quoted diff) +0 -0

b/Documentation/devicetree/bindings/ata/ahci-fsl-qoriq.txt

Quoted 14 lines

Documentation/devicetree/bindings/ata/ahci-fsl-qoriq.txt Binding for Freescale QorIQ AHCI SATA Controller · line 9

Quoted 12 lines

index 7c3ca0e..9ecc019 100644

Documentation/devicetree/bindings/ata/ahci-fsl-qoriq.txt +1 -1
@@ -3,7 +3,7 @@ Binding for Freescale QorIQ AHCI SATA Controller
  Required properties:
    - reg: Physical base address and size of the controller's register area.
    - compatible: Compatibility string. Must be 'fsl,<chip>-ahci', where
-    chip could be ls1021a, ls1043a, ls1046a, ls1088a, ls2080a etc.
+    chip could be ls1021a, ls1043a, ls1046a, ls1088a, ls2080a, lx2160a, etc.
    - clocks: Input clock specifier. Refer to common clock bindings.
    - interrupts: Interrupt specifier. Refer to interrupt binding.
 

MBR, Sergei

_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel