Network announce changes
v2 cover Network announce changes
From: "Dr. David Alan Gilbert" <[email protected]>
Hi,
This is a reworking of a few sets of patches from 2017
that were put together by myself, Germano and Vlad that make the network announce system more flexible.
Firstly, it's parameterised, so that you can change the number
of packets and the gap between them; the number can be set to 0 to disable announce completely.
Secondly, you can force an announce by a qmp or hmp command at
any time. This is useful if you need the guest to do an announce for a different reason; for example if the management layer has just juggled some bonding configuration around.
The packet creation and timing also moves to net/ from migration/
The previous set was:
https://lists.gnu.org/archive/html/qemu-devel/2017-05/msg05594.html
Dave
v2
Fix the qmp example
Typo fixes
Dr. David Alan Gilbert (9):
net: Introduce announce timer
migration: Add announce parameters
virtio-net: Switch to using announce timer
migration: Switch to using announce timer
net: Add a network device specific self-announcement ability
virtio-net: Allow qemu_announce_self to trigger virtio announcements
qmp: Add announce-self command
hmp: Add hmp_announce_self
tests: Add a test for qemu self announcements
hmp-commands.hx | 14 ++++ hmp.c | 33 ++++++++ hmp.h | 1 + hw/net/trace-events | 8 ++ hw/net/virtio-net.c | 69 ++++++++++++---- include/hw/virtio/virtio-net.h | 4 +- include/migration/misc.h | 12 +-- include/net/announce.h | 41 ++++++++++ include/net/net.h | 2 + include/qemu/typedefs.h | 2 + include/sysemu/sysemu.h | 2 - migration/migration.c | 103 +++++++++++++++++++++++- migration/migration.h | 4 + migration/savevm.c | 72 +---------------- migration/trace-events | 1 - net/Makefile.objs | 1 + net/announce.c | 141 +++++++++++++++++++++++++++++++++ net/trace-events | 4 + qapi/migration.json | 54 ++++++++++++- qapi/net.json | 44 ++++++++++ tests/Makefile.include | 2 + tests/test-announce-self.c | 83 +++++++++++++++++++ tests/test-hmp.c | 1 + 23 files changed, 595 insertions(+), 103 deletions(-) create mode 100644 include/net/announce.h create mode 100644 net/announce.c create mode 100644 tests/test-announce-self.c
Signature · 1 line
2.20.1
PATCH v2 1/9 net: Introduce announce timer
From: "Dr. David Alan Gilbert" <[email protected]>
The 'announce timer' will be used by migration, and explicit requests for qemu to perform network announces.
Based on the work by Germano Veit Michel <[email protected]>
and Vlad Yasevich <[email protected]>
--- include/net/announce.h | 39 ++++++++++++++++++++++++++ include/qemu/typedefs.h | 1 + migration/migration.c | 1 + net/Makefile.objs | 1 + net/announce.c | 61 +++++++++++++++++++++++++++++++++++++++++ qapi/net.json | 23 ++++++++++++++++ 6 files changed, 126 insertions(+) create mode 100644 include/net/announce.h create mode 100644 net/announce.c
include/net/announce.h new file +39 -0
@@ -0,0 +1,39 @@ +/* +* Self-announce facility +* (c) 2017-2019 Red Hat, Inc. +* +* This work is licensed under the terms of the GNU GPL, version 2 or later. +* See the COPYING file in the top-level directory. +*/ + +#ifndef QEMU_NET_ANNOUNCE_H +#define QEMU_NET_ANNOUNCE_H + +#include "qemu-common.h" +#include "qapi/qapi-types-net.h" +#include "qemu/timer.h" + +struct AnnounceTimer { +QEMUTimer *tm; +AnnounceParameters params; +QEMUClockType type; +int round; +}; + +/* Returns: update the timer to the next time point */ +int64_t qemu_announce_timer_step (AnnounceTimer *timer); + +/* Delete the underlying timer */ +void qemu_announce_timer_del (AnnounceTimer *timer); + +/* +* Under BQL/main thread +* Reset the timer to the given parameters/type/notifier. +*/ +void qemu_announce_timer_reset (AnnounceTimer *timer, +AnnounceParameters *params, +QEMUClockType type, +QEMUTimerCB *cb, +void *opaque); + +#endif
include/qemu/typedefs.h +1 -0
@@ -8,6 +8,7 @@typedef struct AdapterInfo AdapterInfo ;typedef struct AddressSpace AddressSpace ;typedef struct AioContext AioContext ; +typedef struct AnnounceTimer AnnounceTimer ;typedef struct BdrvDirtyBitmap BdrvDirtyBitmap ;typedef struct BdrvDirtyBitmapIter BdrvDirtyBitmapIter ;typedef struct BlockBackend BlockBackend ;
migration/migration.c +1 -0
@@ -45,6 +45,7 @@#include "migration/colo.h" #include "hw/boards.h" #include "monitor/monitor.h" +#include "net/announce.h" #define MAX_THROTTLE (32 << 20)/* Migration transfer speed throttling */
net/Makefile.objs +1 -0
@@ -2,6 +2,7 @@ common-obj-y = net.o queue.o checksum.o util.o hub.o common-obj-y += socket.o common-obj-y += dump.o common-obj-y += eth.o +common-obj-y += announce.o common-obj-$(CONFIG_L2TPV3) += l2tpv3.o common-obj-$(CONFIG_POSIX) += vhost-user.o common-obj-$(CONFIG_SLIRP) += slirp.o
net/announce.c new file +61 -0
61 lines not on this page · raw message
qapi/net.json +23 -0
@@ -684,3 +684,26 @@ ## { 'event': 'NIC_RX_FILTER_CHANGED', 'data': { '*name': 'str', 'path': 'str' } } + +## +# @AnnounceParameters: +# +# Parameters for self-announce timers +# +# @initial: Initial delay (in ms) before sending the first GARP/RARP +# announcement +# +# @max: Maximum delay (in ms) between GARP/RARP announcement packets +# +# @rounds: Number of self-announcement attempts +# +# @step: Delay increase (in ms) after each self-announcement attempt +# +# Since: 4.0 +## + +{ 'struct': 'AnnounceParameters', + 'data': { 'initial': 'int', + 'max': 'int', + 'rounds': 'int', + 'step': 'int' } }
Signature · 1 line
2.20.1
PATCH v2 2/9 migration: Add announce parameters
In reply to Dr. David Alan Gilbert (git)From: "Dr. David Alan Gilbert" <[email protected]>
Add migration parameters that control RARP/GARP announcement timeouts.
Based on earlier patches by myself and
Vladislav Yasevich <[email protected]>
--- hmp.c | 28 +++++++++++ include/migration/misc.h | 2 + include/qemu/typedefs.h | 1 + migration/migration.c | 100 +++++++++++++++++++++++++++++++++++++++ qapi/migration.json | 54 +++++++++++++++++++-- 5 files changed, 182 insertions(+), 3 deletions(-)
hmp.c +28 -0
@@ -334,6 +334,18 @@ void hmp_info_migrate_parameters(Monitor *mon, const QDict *qdict) params =qmp_query_migrate_parameters (NULL );if (params) { +monitor_printf (mon,"%s: %" PRIu64" ms\n" , +MigrationParameter_str (MIGRATION_PARAMETER_ANNOUNCE_INITIAL ), + params->announce_initial); +monitor_printf (mon,"%s: %" PRIu64" ms\n" , +MigrationParameter_str (MIGRATION_PARAMETER_ANNOUNCE_MAX ), + params->announce_max); +monitor_printf (mon,"%s: %" PRIu64"\n" , +MigrationParameter_str (MIGRATION_PARAMETER_ANNOUNCE_ROUNDS ), + params->announce_rounds); +monitor_printf (mon,"%s: %" PRIu64" ms\n" , +MigrationParameter_str (MIGRATION_PARAMETER_ANNOUNCE_STEP ), + params->announce_step);assert (params->has_compress_level); monitor_printf(mon, "%s: %u\n", MigrationParameter_str(MIGRATION_PARAMETER_COMPRESS_LEVEL),
@@ -1757,6 +1769,22 @@ void hmp_migrate_set_parameter(Monitor *mon, const QDict *qdict) p->has_max_postcopy_bandwidth = true;visit_type_size (v, param, &p->max_postcopy_bandwidth, &err);break ; +case MIGRATION_PARAMETER_ANNOUNCE_INITIAL : + p->has_announce_initial = true; +visit_type_size (v, param, &p->announce_initial, &err); +break ; +case MIGRATION_PARAMETER_ANNOUNCE_MAX : + p->has_announce_max = true; +visit_type_size (v, param, &p->announce_max, &err); +break ; +case MIGRATION_PARAMETER_ANNOUNCE_ROUNDS : + p->has_announce_rounds = true; +visit_type_size (v, param, &p->announce_rounds, &err); +break ; +case MIGRATION_PARAMETER_ANNOUNCE_STEP : + p->has_announce_step = true; +visit_type_size (v, param, &p->announce_step, &err); +break ;default :assert (0 ); }
include/migration/misc.h +2 -0
@@ -15,6 +15,7 @@#define MIGRATION_MISC_H #include "qemu/notify.h" +#include "qapi/qapi-types-net.h" /* migration/ram.c */
@@ -38,6 +39,7 @@ int64_t self_announce_delay(int round)return 50 + (SELF_ANNOUNCE_ROUNDS - round -1 ) *100 ; } +AnnounceParameters *migrate_announce_params (void );/* migration/savevm.c */ void dump_vmstate_json_to_file (FILE *out_fp);
include/qemu/typedefs.h +1 -0
@@ -8,6 +8,7 @@typedef struct AdapterInfo AdapterInfo ;typedef struct AddressSpace AddressSpace ;typedef struct AioContext AioContext ; +typedef struct AnnounceParameters AnnounceParameters ;typedef struct AnnounceTimer AnnounceTimer ;typedef struct BdrvDirtyBitmap BdrvDirtyBitmap ;typedef struct BdrvDirtyBitmapIter BdrvDirtyBitmapIter ;
migration/migration.c +100 -0
146 lines not on this page · raw message
qapi/migration.json +51 -3
99 lines not on this page · raw message
Signature · 1 line
2.20.1
Re: [Qemu-devel] [PATCH v2 2/9] migration: Add announce parameters
Quoted 49 lines · Dr. David Alan Gilbert (git)
From: "Dr. David Alan Gilbert" <[email protected]>
Add migration parameters that control RARP/GARP announcement timeouts.
Based on earlier patches by myself and
Vladislav Yasevich <[email protected]>Signed-off-by Dr. David Alan Gilbert <[email protected]>--- hmp.c | 28 +++++++++++ include/migration/misc.h | 2 + include/qemu/typedefs.h | 1 + migration/migration.c | 100 +++++++++++++++++++++++++++++++++++++++ qapi/migration.json | 54 +++++++++++++++++++-- 5 files changed, 182 insertions(+), 3 deletions(-)qapi/migration.json +13
-0@@ -6,6 +6,7 @@ ## { 'include': 'common.json' } +{ 'include': 'net.json' }@@ -572,6 +588,18 @@ ## # @MigrateSetParameters: # +# @announce-initial: Initial delay (in ms) before sending the first announce +# (Since 4.0) +# +# @announce-max: Maximum delay (in ms) between packets in the announcment +# (Since 4.0) +# +# @announce-rounds: Number of self-announce packets sent after migration +# (Since 4.0) +# +# @announce-step: Increase in delay (in ms) between subsequent packets in +# the announcement (Since 4.0) +# # @compress-level: compression level # # @compress-threads: compression thread count@@ -653,7 +681,11 @@ # TODO either fuse back into MigrationParameters, or make # MigrationParameters members mandatory
qapi/migration.json line 691
Quoted 10 lines
qapi/migration.json +5
-1{ 'struct': 'MigrateSetParameters', - 'data': { '*compress-level': 'int', + 'data': { '*announce-initial': 'size', + '*announce-max': 'size', + '*announce-rounds': 'size', + '*announce-step': 'size', + '*compress-level': 'int', '*compress-threads': 'int', '*compress-wait-thread': 'bool', '*decompress-threads': 'int',
Historically we've just had a flat list of migration parameters, but QAPI doesn't require this. So I wonder about just referencing the type you defined in the previous patch:
'*announce': 'AnnounceParameters
from a QMP pov this is trivial & feels more natural. The only downside I see is that for HMP it would need to be flattened to what it is here. We generally tend to prefer QMP's natural style, even if it doesn't match what's nicest for HMP.
Quoted 20 lines
qapi/migration.json +12
-0@@ -692,6 +724,18 @@ # # The optional members aren't actually optional. # +# @announce-initial: Initial delay (in ms) before sending the first announce +# (Since 4.0) +# +# @announce-max: Maximum delay (in ms) between packets in the announcment +# (Since 4.0) +# +# @announce-rounds: Number of self-announce packets sent after migration +# (Since 4.0) +# +# @announce-step: Increase in delay (in ms) between subsequent packets in +# the announcement (Since 4.0) +# # @compress-level: compression level # # @compress-threads: compression thread count
qapi/migration.json line 819
Quoted 8 lines
qapi/migration.json +4
-1@@ -769,7 +813,11 @@ # Since: 2.4 ## { 'struct': 'MigrationParameters', - 'data': { '*compress-level': 'uint8', + 'data': { '*announce-initial': 'size', + '*announce-max': 'size', + '*announce-rounds': 'size', + '*announce-step': 'size',
Same here about just referencing the AnnounceParameters type.
qapi/migration.json line 823
Quoted 4 lines
qapi/migration.json +1
-0+ '*compress-level': 'uint8', '*compress-threads': 'uint8', '*compress-wait-thread': 'bool', '*decompress-threads': 'uint8',
Regards,
Daniel
Signature · 3 lines
|: https://berrange.com -o- https://www.flickr.com/photos/dberrange :| |: https://libvirt.org -o- https://fstop138.berrange.com :| |: https://entangle-photo.org -o- https://www.instagram.com/dberrange :|
Re: [Qemu-devel] [PATCH v2 2/9] migration: Add announce parameters
Quoted 65 lines · * Daniel P. Berrangé ([email protected]) wrote:
Quoted 49 lines · Dr. David Alan Gilbert (git)
From: "Dr. David Alan Gilbert" <[email protected]>
Add migration parameters that control RARP/GARP announcement timeouts.
Based on earlier patches by myself and
Vladislav Yasevich <[email protected]>Signed-off-by Dr. David Alan Gilbert <[email protected]>--- hmp.c | 28 +++++++++++ include/migration/misc.h | 2 + include/qemu/typedefs.h | 1 + migration/migration.c | 100 +++++++++++++++++++++++++++++++++++++++ qapi/migration.json | 54 +++++++++++++++++++-- 5 files changed, 182 insertions(+), 3 deletions(-)qapi/migration.json +13
-0@@ -6,6 +6,7 @@ ## { 'include': 'common.json' } +{ 'include': 'net.json' }@@ -572,6 +588,18 @@ ## # @MigrateSetParameters: # +# @announce-initial: Initial delay (in ms) before sending the first announce +# (Since 4.0) +# +# @announce-max: Maximum delay (in ms) between packets in the announcment +# (Since 4.0) +# +# @announce-rounds: Number of self-announce packets sent after migration +# (Since 4.0) +# +# @announce-step: Increase in delay (in ms) between subsequent packets in +# the announcement (Since 4.0) +# # @compress-level: compression level # # @compress-threads: compression thread count@@ -653,7 +681,11 @@ # TODO either fuse back into MigrationParameters, or make # MigrationParameters members mandatoryqapi/migration.json line 691
Quoted 10 lines
qapi/migration.json +5
-1{ 'struct': 'MigrateSetParameters', - 'data': { '*compress-level': 'int', + 'data': { '*announce-initial': 'size', + '*announce-max': 'size', + '*announce-rounds': 'size', + '*announce-step': 'size', + '*compress-level': 'int', '*compress-threads': 'int', '*compress-wait-thread': 'bool', '*decompress-threads': 'int',Historically we've just had a flat list of migration parameters, but QAPI doesn't require this. So I wonder about just referencing the type you defined in the previous patch:
Quoted 6 lines
'*announce': 'AnnounceParameters
from a QMP pov this is trivial & feels more natural. The only downside I see is that for HMP it would need to be flattened to what it is here. We generally tend to prefer QMP's natural style, even if it doesn't match what's nicest for HMP.
I don't trust that's true from QMP; the logic to keep the parameters optional so that you can set a parameter individually is already pretty hairy.
Dave
Quoted 31 lines
Quoted 20 lines
qapi/migration.json +12
-0@@ -692,6 +724,18 @@ # # The optional members aren't actually optional. # +# @announce-initial: Initial delay (in ms) before sending the first announce +# (Since 4.0) +# +# @announce-max: Maximum delay (in ms) between packets in the announcment +# (Since 4.0) +# +# @announce-rounds: Number of self-announce packets sent after migration +# (Since 4.0) +# +# @announce-step: Increase in delay (in ms) between subsequent packets in +# the announcement (Since 4.0) +# # @compress-level: compression level # # @compress-threads: compression thread countqapi/migration.json line 819
Quoted 8 lines
qapi/migration.json +4
-1@@ -769,7 +813,11 @@ # Since: 2.4 ## { 'struct': 'MigrationParameters', - 'data': { '*compress-level': 'uint8', + 'data': { '*announce-initial': 'size', + '*announce-max': 'size', + '*announce-rounds': 'size', + '*announce-step': 'size',Same here about just referencing the AnnounceParameters type.
Quoted 11 lines
qapi/migration.json line 823
Quoted 4 lines
qapi/migration.json +1
-0+ '*compress-level': 'uint8', '*compress-threads': 'uint8', '*compress-wait-thread': 'bool', '*decompress-threads': 'uint8',Regards,
DanielSignature · 3 lines
|: https://berrange.com -o- https://www.flickr.com/photos/dberrange :| |: https://libvirt.org -o- https://fstop138.berrange.com :| |: https://entangle-photo.org -o- https://www.instagram.com/dberrange :|
--
Dr. David Alan Gilbert / [email protected] / Manchester, UK
Re: [Qemu-devel] [PATCH v2 2/9] migration: Add announce parameters
Quoted 68 lines · Dr. David Alan Gilbert
Quoted 67 lines · * Daniel P. Berrangé ([email protected]) wrote:
Quoted 49 lines · Dr. David Alan Gilbert (git)
From: "Dr. David Alan Gilbert" <[email protected]>
Add migration parameters that control RARP/GARP announcement timeouts.
Based on earlier patches by myself and
Vladislav Yasevich <[email protected]>Signed-off-by Dr. David Alan Gilbert <[email protected]>--- hmp.c | 28 +++++++++++ include/migration/misc.h | 2 + include/qemu/typedefs.h | 1 + migration/migration.c | 100 +++++++++++++++++++++++++++++++++++++++ qapi/migration.json | 54 +++++++++++++++++++-- 5 files changed, 182 insertions(+), 3 deletions(-)qapi/migration.json +13
-0@@ -6,6 +6,7 @@ ## { 'include': 'common.json' } +{ 'include': 'net.json' }@@ -572,6 +588,18 @@ ## # @MigrateSetParameters: # +# @announce-initial: Initial delay (in ms) before sending the first announce +# (Since 4.0) +# +# @announce-max: Maximum delay (in ms) between packets in the announcment +# (Since 4.0) +# +# @announce-rounds: Number of self-announce packets sent after migration +# (Since 4.0) +# +# @announce-step: Increase in delay (in ms) between subsequent packets in +# the announcement (Since 4.0) +# # @compress-level: compression level # # @compress-threads: compression thread count@@ -653,7 +681,11 @@ # TODO either fuse back into MigrationParameters, or make # MigrationParameters members mandatoryqapi/migration.json line 691
Quoted 10 lines
qapi/migration.json +5
-1{ 'struct': 'MigrateSetParameters', - 'data': { '*compress-level': 'int', + 'data': { '*announce-initial': 'size', + '*announce-max': 'size', + '*announce-rounds': 'size', + '*announce-step': 'size', + '*compress-level': 'int', '*compress-threads': 'int', '*compress-wait-thread': 'bool', '*decompress-threads': 'int',Historically we've just had a flat list of migration parameters, but QAPI doesn't require this. So I wonder about just referencing the type you defined in the previous patch:
'*announce': 'AnnounceParameters
Quoted 8 lines
Quoted 4 lines
from a QMP pov this is trivial & feels more natural. The only downside I see is that for HMP it would need to be flattened to what it is here. We generally tend to prefer QMP's natural style, even if it doesn't match what's nicest for HMP.
I don't trust that's true from QMP; the logic to keep the parameters optional so that you can set a parameter individually is already pretty hairy.
Yes, this different design would mean that the overall 'announce' parmaeter was optional. If you did provide one of the parameters though, you would need to provide all 4 of them. I don't think that's a bad thing though, as the values really only make sense when considered as a whole. So setting one announce parameter without knowing what the other values are is somewhat unreliable.
Regards,
Daniel
Signature · 3 lines
|: https://berrange.com -o- https://www.flickr.com/photos/dberrange :| |: https://libvirt.org -o- https://fstop138.berrange.com :| |: https://entangle-photo.org -o- https://www.instagram.com/dberrange :|
Re: [Qemu-devel] [PATCH v2 2/9] migration: Add announce parameters
Quoted 78 lines · * Daniel P. Berrangé ([email protected]) wrote:
Quoted 68 lines · Dr. David Alan Gilbert
Quoted 67 lines · * Daniel P. Berrangé ([email protected]) wrote:
Quoted 49 lines · Dr. David Alan Gilbert (git)
From: "Dr. David Alan Gilbert" <[email protected]>
Add migration parameters that control RARP/GARP announcement timeouts.
Based on earlier patches by myself and
Vladislav Yasevich <[email protected]>Signed-off-by Dr. David Alan Gilbert <[email protected]>--- hmp.c | 28 +++++++++++ include/migration/misc.h | 2 + include/qemu/typedefs.h | 1 + migration/migration.c | 100 +++++++++++++++++++++++++++++++++++++++ qapi/migration.json | 54 +++++++++++++++++++-- 5 files changed, 182 insertions(+), 3 deletions(-)qapi/migration.json +13
-0@@ -6,6 +6,7 @@ ## { 'include': 'common.json' } +{ 'include': 'net.json' }@@ -572,6 +588,18 @@ ## # @MigrateSetParameters: # +# @announce-initial: Initial delay (in ms) before sending the first announce +# (Since 4.0) +# +# @announce-max: Maximum delay (in ms) between packets in the announcment +# (Since 4.0) +# +# @announce-rounds: Number of self-announce packets sent after migration +# (Since 4.0) +# +# @announce-step: Increase in delay (in ms) between subsequent packets in +# the announcement (Since 4.0) +# # @compress-level: compression level # # @compress-threads: compression thread count@@ -653,7 +681,11 @@ # TODO either fuse back into MigrationParameters, or make # MigrationParameters members mandatoryqapi/migration.json line 691
Quoted 10 lines
qapi/migration.json +5
-1{ 'struct': 'MigrateSetParameters', - 'data': { '*compress-level': 'int', + 'data': { '*announce-initial': 'size', + '*announce-max': 'size', + '*announce-rounds': 'size', + '*announce-step': 'size', + '*compress-level': 'int', '*compress-threads': 'int', '*compress-wait-thread': 'bool', '*decompress-threads': 'int',Historically we've just had a flat list of migration parameters, but QAPI doesn't require this. So I wonder about just referencing the type you defined in the previous patch:
'*announce': 'AnnounceParameters
Quoted 8 lines
Quoted 4 lines
from a QMP pov this is trivial & feels more natural. The only downside I see is that for HMP it would need to be flattened to what it is here. We generally tend to prefer QMP's natural style, even if it doesn't match what's nicest for HMP.
I don't trust that's true from QMP; the logic to keep the parameters optional so that you can set a parameter individually is already pretty hairy.
Quoted 6 lines
Yes, this different design would mean that the overall 'announce' parmaeter was optional. If you did provide one of the parameters though, you would need to provide all 4 of them. I don't think that's a bad thing though, as the values really only make sense when considered as a whole. So setting one announce parameter without knowing what the other values are is somewhat unreliable.
Actually, some of them make a lot of sense; for example just setting 'rounds' to 0 to stop any announce works really well, or doubling it if you want to keep it shouting longer; my suspicion is that very few people would fiddle with anything except 'rounds'.
Dave
Quoted 7 lines
Regards,
DanielSignature · 3 lines
|: https://berrange.com -o- https://www.flickr.com/photos/dberrange :| |: https://libvirt.org -o- https://fstop138.berrange.com :| |: https://entangle-photo.org -o- https://www.instagram.com/dberrange :|
--
Dr. David Alan Gilbert / [email protected] / Manchester, UK
Re: [Qemu-devel] [PATCH v2 2/9] migration: Add announce parameters
Quoted 86 lines · Dr. David Alan Gilbert
Quoted 78 lines · * Daniel P. Berrangé ([email protected]) wrote:
Quoted 68 lines · Dr. David Alan Gilbert
Quoted 67 lines · * Daniel P. Berrangé ([email protected]) wrote:
Quoted 49 lines · Dr. David Alan Gilbert (git)
From: "Dr. David Alan Gilbert" <[email protected]>
Add migration parameters that control RARP/GARP announcement timeouts.
Based on earlier patches by myself and
Vladislav Yasevich <[email protected]>Signed-off-by Dr. David Alan Gilbert <[email protected]>--- hmp.c | 28 +++++++++++ include/migration/misc.h | 2 + include/qemu/typedefs.h | 1 + migration/migration.c | 100 +++++++++++++++++++++++++++++++++++++++ qapi/migration.json | 54 +++++++++++++++++++-- 5 files changed, 182 insertions(+), 3 deletions(-)qapi/migration.json +13
-0@@ -6,6 +6,7 @@ ## { 'include': 'common.json' } +{ 'include': 'net.json' }@@ -572,6 +588,18 @@ ## # @MigrateSetParameters: # +# @announce-initial: Initial delay (in ms) before sending the first announce +# (Since 4.0) +# +# @announce-max: Maximum delay (in ms) between packets in the announcment +# (Since 4.0) +# +# @announce-rounds: Number of self-announce packets sent after migration +# (Since 4.0) +# +# @announce-step: Increase in delay (in ms) between subsequent packets in +# the announcement (Since 4.0) +# # @compress-level: compression level # # @compress-threads: compression thread count@@ -653,7 +681,11 @@ # TODO either fuse back into MigrationParameters, or make # MigrationParameters members mandatoryqapi/migration.json line 691
Quoted 10 lines
qapi/migration.json +5
-1{ 'struct': 'MigrateSetParameters', - 'data': { '*compress-level': 'int', + 'data': { '*announce-initial': 'size', + '*announce-max': 'size', + '*announce-rounds': 'size', + '*announce-step': 'size', + '*compress-level': 'int', '*compress-threads': 'int', '*compress-wait-thread': 'bool', '*decompress-threads': 'int',Historically we've just had a flat list of migration parameters, but QAPI doesn't require this. So I wonder about just referencing the type you defined in the previous patch:
'*announce': 'AnnounceParameters
Quoted 8 lines
Quoted 4 lines
from a QMP pov this is trivial & feels more natural. The only downside I see is that for HMP it would need to be flattened to what it is here. We generally tend to prefer QMP's natural style, even if it doesn't match what's nicest for HMP.
I don't trust that's true from QMP; the logic to keep the parameters optional so that you can set a parameter individually is already pretty hairy.
Quoted 6 lines
Yes, this different design would mean that the overall 'announce' parmaeter was optional. If you did provide one of the parameters though, you would need to provide all 4 of them. I don't think that's a bad thing though, as the values really only make sense when considered as a whole. So setting one announce parameter without knowing what the other values are is somewhat unreliable.
Quoted 4 lines
Actually, some of them make a lot of sense; for example just setting 'rounds' to 0 to stop any announce works really well, or doubling it if you want to keep it shouting longer; my suspicion is that very few people would fiddle with anything except 'rounds'.
Ok, well don't consider my suggestion a blocker if you think it is not desirable.
Regards,
Daniel
Signature · 3 lines
|: https://berrange.com -o- https://www.flickr.com/photos/dberrange :| |: https://libvirt.org -o- https://fstop138.berrange.com :| |: https://entangle-photo.org -o- https://www.instagram.com/dberrange :|
PATCH v2 3/9 virtio-net: Switch to using announce timer
In reply to Dr. David Alan Gilbert (git)From: "Dr. David Alan Gilbert" <[email protected]>
Switch virtio's self announcement to use the AnnounceTimer. It keeps it's own AnnounceTimer (per device), and starts running it using a migration post-load and a virtual clock; that way the announce happens once the guest is actually running.
The timer uses the migration parameters to set the timing of the repeats.
Based on earlier patches by myself and
Vladislav Yasevich <[email protected]>
--- hw/net/trace-events | 7 +++++++ hw/net/virtio-net.c | 36 ++++++++++++++++++++++------------ include/hw/virtio/virtio-net.h | 4 ++-- 3 files changed, 32 insertions(+), 15 deletions(-)
hw/net/trace-events +7 -0
@@ -359,3 +359,10 @@ sunhme_rx_filter_reject(void) "rejecting incoming frame" sunhme_rx_filter_accept(void) "accepting incoming frame" sunhme_rx_desc(uint32_t addr, int offset, uint32_t status, int len, int cr, int nr) "addr 0x%"PRIx32"(+0x%x) status 0x%"PRIx32 " len %d (ring %d/%d)" sunhme_rx_xsum_calc(uint16_t xsum) "calculated incoming xsum as 0x%x" + +# hw/net/virtio-net.c +virtio_net_announce_timer(int round) "%d" +virtio_net_handle_announce(int round) "%d" +virtio_net_post_load_device(void) + +
hw/net/virtio-net.c +23 -13
@@ -21,12 +21,14 @@#include "qemu/timer.h" #include "hw/virtio/virtio-net.h" #include "net/vhost_net.h" +#include "net/announce.h" #include "hw/virtio/virtio-bus.h" #include "qapi/error.h" #include "qapi/qapi-events-net.h" #include "hw/virtio/virtio-access.h" #include "migration/misc.h" #include "standard-headers/linux/ethtool.h" +#include "trace.h" #define VIRTIO_NET_VM_VERSION 11
@@ -164,8 +166,9 @@ static void virtio_net_announce_timer(void *opaque) {VirtIONet *n = opaque;VirtIODevice *vdev =VIRTIO_DEVICE (n); +trace_virtio_net_announce_timer (n->announce_timer.round); - n->announce_counter--; + n->announce_timer.round--; n->status |=VIRTIO_NET_S_ANNOUNCE ;virtio_notify_config (vdev); }
@@ -479,8 +482,8 @@ static void virtio_net_reset(VirtIODevice *vdev) n->nobcast =0 ;/* multiqueue is disabled by default */ n->curr_queues =1 ; -timer_del (n->announce_timer); - n->announce_counter =0 ; +timer_del (n->announce_timer.tm); + n->announce_timer.round =0 ; n->status &= ~VIRTIO_NET_S_ANNOUNCE ;/* Flush any MAC and VLAN filter table state */
@@ -976,13 +979,12 @@ static int virtio_net_handle_vlan_table(VirtIONet *n, uint8_t cmd,static int virtio_net_handle_announce (VirtIONet *n,uint8_t cmd,struct iovec *iov,unsigned int iov_cnt) { +trace_virtio_net_handle_announce (n->announce_timer.round);if (cmd ==VIRTIO_NET_CTRL_ANNOUNCE_ACK && n->status &VIRTIO_NET_S_ANNOUNCE ) { n->status &= ~VIRTIO_NET_S_ANNOUNCE ; -if (n->announce_counter) { -timer_mod (n->announce_timer, -qemu_clock_get_ms (QEMU_CLOCK_VIRTUAL ) + -self_announce_delay (n->announce_counter)); +if (n->announce_timer.round) { +qemu_announce_timer_step (&n->announce_timer); }return VIRTIO_NET_OK ; }else {
@@ -2298,6 +2300,7 @@ static int virtio_net_post_load_device(void *opaque, int version_id)VirtIODevice *vdev =VIRTIO_DEVICE (n);int i, link_down; +trace_virtio_net_post_load_device ();virtio_net_set_mrg_rx_bufs (n, n->mergeable_rx_bufs,virtio_vdev_has_feature (vdev,VIRTIO_F_VERSION_1 ));
@@ -2334,8 +2337,15 @@ static int virtio_net_post_load_device(void *opaque, int version_id)if (virtio_vdev_has_feature (vdev,VIRTIO_NET_F_GUEST_ANNOUNCE ) &&virtio_vdev_has_feature (vdev,VIRTIO_NET_F_CTRL_VQ )) { - n->announce_counter =SELF_ANNOUNCE_ROUNDS ; -timer_mod (n->announce_timer,qemu_clock_get_ms (QEMU_CLOCK_VIRTUAL )); +qemu_announce_timer_reset (&n->announce_timer,migrate_announce_params (), +QEMU_CLOCK_VIRTUAL , + virtio_net_announce_timer, n); +if (n->announce_timer.round) { +timer_mod (n->announce_timer.tm, +qemu_clock_get_ms (n->announce_timer.type)); + }else { +qemu_announce_timer_del (&n->announce_timer); + } }return 0 ;
@@ -2696,8 +2706,9 @@ static void virtio_net_device_realize(DeviceState *dev, Error **errp)qemu_macaddr_default_if_unset (&n->nic_conf.macaddr);memcpy (&n->mac[0 ], &n->nic_conf.macaddr,sizeof (n->mac)); n->status =VIRTIO_NET_S_LINK_UP ; - n->announce_timer =timer_new_ms (QEMU_CLOCK_VIRTUAL , - virtio_net_announce_timer, n); +qemu_announce_timer_reset (&n->announce_timer,migrate_announce_params (), +QEMU_CLOCK_VIRTUAL , + virtio_net_announce_timer, n);if (n->netclient_type) {/*
@@ -2760,8 +2771,7 @@ static void virtio_net_device_unrealize(DeviceState *dev, Error **errp)virtio_net_del_queue (n, i); } -timer_del (n->announce_timer); -timer_free (n->announce_timer); +qemu_announce_timer_del (&n->announce_timer);g_free (n->vqs);qemu_del_nic (n->nic);virtio_net_rsc_cleanup (n);
include/hw/virtio/virtio-net.h +2 -2
@@ -17,6 +17,7 @@#include "qemu/units.h" #include "standard-headers/linux/virtio_net.h" #include "hw/virtio/virtio.h" +#include "net/announce.h" #define TYPE_VIRTIO_NET "virtio-net-device"#define VIRTIO_NET (obj) \
@@ -181,8 +182,7 @@ struct VirtIONet {char *netclient_name;char *netclient_type;uint64_t curr_guest_offloads; -QEMUTimer *announce_timer; -int announce_counter; +AnnounceTimer announce_timer;bool needs_vnet_hdr_swap;bool mtu_bypass_backend; };
Signature · 1 line
2.20.1
PATCH v2 4/9 migration: Switch to using announce timer
In reply to Dr. David Alan Gilbert (git)From: "Dr. David Alan Gilbert" <[email protected]>
Switch the announcements to using the new announce timer. Move the code that does it to announce.c rather than savevm because it really has nothing to do with the actual migration.
Migration starts the announce from bh's and so they're all in the main thread/bql, and so there's never any racing with the timers themselves.
--- include/migration/misc.h | 10 ------ include/net/announce.h | 2 ++ include/sysemu/sysemu.h | 2 -- migration/migration.c | 2 +- migration/migration.h | 4 +++ migration/savevm.c | 72 ++-------------------------------------- migration/trace-events | 1 - net/announce.c | 67 +++++++++++++++++++++++++++++++++++++ net/trace-events | 4 +++ 9 files changed, 81 insertions(+), 83 deletions(-)
include/migration/misc.h +0 -10
@@ -29,16 +29,6 @@ void blk_mig_init(void);static inline void blk_mig_init (void ) {}#endif -#define SELF_ANNOUNCE_ROUNDS 5 - -static inline -int64_t self_announce_delay (int round) -{ -assert (round <SELF_ANNOUNCE_ROUNDS && round >0 ); -/* delay 50ms, 150ms, 250ms, ... */ -return 50 + (SELF_ANNOUNCE_ROUNDS - round -1 ) *100 ; -} -AnnounceParameters *migrate_announce_params (void );/* migration/savevm.c */
include/net/announce.h +2 -0
@@ -36,4 +36,6 @@ void qemu_announce_timer_reset(AnnounceTimer *timer, QEMUTimerCB *cb, void *opaque); +void qemu_announce_self (AnnounceTimer *timer,AnnounceParameters *params); +#endif
include/sysemu/sysemu.h +0 -2
@@ -81,8 +81,6 @@ extern bool machine_init_done;void qemu_add_machine_init_done_notifier (Notifier *notify);void qemu_remove_machine_init_done_notifier (Notifier *notify); -void qemu_announce_self (void ); -extern int autostart; typedef enum {
migration/migration.c +1 -1
@@ -374,7 +374,7 @@ static void process_incoming_migration_bh(void *opaque)* This must happen after all error conditions are dealt with and * we're sure the VM is going to be running on this host. */ -qemu_announce_self (); +qemu_announce_self (&mis->announce_timer,migrate_announce_params ());if (multifd_load_cleanup (&local_err) !=0 ) {error_report_err (local_err);
migration/migration.h +4 -0
@@ -21,6 +21,7 @@#include "qemu/coroutine_int.h" #include "hw/qdev.h" #include "io/channel.h" +#include "net/announce.h" struct PostcopyBlocktimeContext ;
@@ -36,6 +37,9 @@ struct MigrationIncomingState {*/ QemuEvent main_thread_load_event; +/* For network announces */ +AnnounceTimer announce_timer; +size_t largest_page_size;bool have_fault_thread;QemuThread fault_thread;
migration/savevm.c +3 -69
96 lines not on this page · raw message
migration/trace-events +0 -1
@@ -52,7 +52,6 @@ vmstate_save_state_top(const char *idstr) "%s" vmstate_subsection_save_loop(const char *name, const char *sub) "%s/%s" vmstate_subsection_save_top(const char *idstr) "%s" vmstate_load(const char *idstr, const char *vmsd_name) "%s, %s" -qemu_announce_self_iter(const char *mac) "%s" # migration/vmstate.c vmstate_load_field_error(const char *field, int ret) "field \"%s\" load failed, ret = %d"
net/announce.c +67 -0
78 lines not on this page · raw message
net/trace-events +4 -0
@@ -1,5 +1,8 @@ # See docs/devel/tracing.txt for syntax documentation. +# net/announce.c +qemu_announce_self_iter(const char *mac) "%s" + # net/vhost-user.c vhost_user_event(const char *chr, int event) "chr: %s got event: %d"
@@ -19,3 +22,4 @@ colo_compare_tcp_info(const char *pkt, uint32_t seq, uint32_t ack, int hdlen, in colo_filter_rewriter_debug(void) "" colo_filter_rewriter_pkt_info(const char *func, const char *src, const char *dst, uint32_t seq, uint32_t ack, uint32_t flag) "%s: src/dst: %s/%s p: seq/ack=%u/%u flags=0x%x\n" colo_filter_rewriter_conn_offset(uint32_t offset) ": offset=%u\n" +
Signature · 1 line
2.20.1
Re: [Qemu-devel] [PATCH v2 4/9] migration: Switch to using announce timer
Quoted 45 lines · Dr. David Alan Gilbert (git)
From: "Dr. David Alan Gilbert" <[email protected]>
Switch the announcements to using the new announce timer. Move the code that does it to
announce.crather than savevm because it really has nothing to do with the actual migration.Migration starts the announce from bh's and so they're all in the main thread/bql, and so there's never any racing with the timers themselves.
Signed-off-by Dr. David Alan Gilbert <[email protected]>--- include/migration/misc.h | 10 ------ include/net/announce.h | 2 ++ include/sysemu/sysemu.h | 2 -- migration/migration.c | 2 +- migration/migration.h | 4 +++ migration/savevm.c | 72 ++-------------------------------------- migration/trace-events | 1 - net/announce.c | 67 +++++++++++++++++++++++++++++++++++++ net/trace-events | 4 +++ 9 files changed, 81 insertions(+), 83 deletions(-)net/announce.c +21
-0+#ifndef ETH_P_RARP +#define ETH_P_RARP 0x8035 +#endif +#define ARP_HTYPE_ETH 0x0001 +#define ARP_PTYPE_IP 0x0800 +#define ARP_OP_REQUEST_REV 0x3 + +static int announce_self_create (uint8_t *buf, +uint8_t *mac_addr) +{ +/* Ethernet header. */ +memset (buf,0xff ,6 );/* destination MAC addr */ +memcpy (buf +6 , mac_addr,6 );/* source MAC addr */ + *(uint16_t *)(buf +12 ) =htons (ETH_P_RARP );/* ethertype */ + +/* RARP header. */ + *(uint16_t *)(buf +14 ) =htons (ARP_HTYPE_ETH );/* hardware addr space */ + *(uint16_t *)(buf +16 ) =htons (ARP_PTYPE_IP );/* protocol addr space */ + *(buf +18 ) =6 ;/* hardware addr length (ethernet) */ + *(buf +19 ) =4 ;/* protocol addr length (IPv4) */ + *(uint16_t *)(buf +20 ) =htons (ARP_OP_REQUEST_REV );/* opcode */
net/announce.c void qemu_announce_timer_reset(AnnounceTimer *timer, · line 94
Quoted 10 lines
net/announce.c +10
-0+memcpy (buf +22 , mac_addr,6 );/* source hw addr */ +memset (buf +28 ,0x00 ,4 );/* source protocol addr */ +memcpy (buf +32 , mac_addr,6 );/* target hw addr */ +memset (buf +38 ,0x00 ,4 );/* target protocol addr */ + +/* Padding to get up to 60 bytes (ethernet min packet size, minus FCS). */ +memset (buf +42 ,0x00 ,18 ); + +return 60 ;/* len (FCS will be added by hardware) */ +}
I think I would suggest defining a packed struct for the ethernet packet we're sending, so we can just reference named fields instead of magic offsets. Then I realized this patch is just moving some pre-existing code, so it is probably better to leave it as it is in this patch, as mixing code movement with refactoring is bad practice. If anyone fancies doing a latter patch to use a struct though, it might be nice.
Regards,
Daniel
Signature · 3 lines
|: https://berrange.com -o- https://www.flickr.com/photos/dberrange :| |: https://libvirt.org -o- https://fstop138.berrange.com :| |: https://entangle-photo.org -o- https://www.instagram.com/dberrange :|
Re: [Qemu-devel] [PATCH v2 4/9] migration: Switch to using announce timer
Quoted 57 lines · Daniel P. Berrangé
Quoted 45 lines · Dr. David Alan Gilbert (git)
From: "Dr. David Alan Gilbert" <[email protected]>
Switch the announcements to using the new announce timer. Move the code that does it to
announce.crather than savevm because it really has nothing to do with the actual migration.Migration starts the announce from bh's and so they're all in the main thread/bql, and so there's never any racing with the timers themselves.
Signed-off-by Dr. David Alan Gilbert <[email protected]>--- include/migration/misc.h | 10 ------ include/net/announce.h | 2 ++ include/sysemu/sysemu.h | 2 -- migration/migration.c | 2 +- migration/migration.h | 4 +++ migration/savevm.c | 72 ++-------------------------------------- migration/trace-events | 1 - net/announce.c | 67 +++++++++++++++++++++++++++++++++++++ net/trace-events | 4 +++ 9 files changed, 81 insertions(+), 83 deletions(-)net/announce.c +21
-0+#ifndef ETH_P_RARP +#define ETH_P_RARP 0x8035 +#endif +#define ARP_HTYPE_ETH 0x0001 +#define ARP_PTYPE_IP 0x0800 +#define ARP_OP_REQUEST_REV 0x3 + +static int announce_self_create (uint8_t *buf, +uint8_t *mac_addr) +{ +/* Ethernet header. */ +memset (buf,0xff ,6 );/* destination MAC addr */ +memcpy (buf +6 , mac_addr,6 );/* source MAC addr */ + *(uint16_t *)(buf +12 ) =htons (ETH_P_RARP );/* ethertype */ + +/* RARP header. */ + *(uint16_t *)(buf +14 ) =htons (ARP_HTYPE_ETH );/* hardware addr space */ + *(uint16_t *)(buf +16 ) =htons (ARP_PTYPE_IP );/* protocol addr space */ + *(buf +18 ) =6 ;/* hardware addr length (ethernet) */ + *(buf +19 ) =4 ;/* protocol addr length (IPv4) */ + *(uint16_t *)(buf +20 ) =htons (ARP_OP_REQUEST_REV );/* opcode */ net/announce.c void qemu_announce_timer_reset(AnnounceTimer *timer, · line 94
Quoted 10 lines
net/announce.c +10
-0+memcpy (buf +22 , mac_addr,6 );/* source hw addr */ +memset (buf +28 ,0x00 ,4 );/* source protocol addr */ +memcpy (buf +32 , mac_addr,6 );/* target hw addr */ +memset (buf +38 ,0x00 ,4 );/* target protocol addr */ + +/* Padding to get up to 60 bytes (ethernet min packet size, minus FCS). */ +memset (buf +42 ,0x00 ,18 ); + +return 60 ;/* len (FCS will be added by hardware) */ +}
Quoted 7 lines
I think I would suggest defining a packed struct for the ethernet packet we're sending, so we can just reference named fields instead of magic offsets. Then I realized this patch is just moving some pre-existing code, so it is probably better to leave it as it is in this patch, as mixing code movement with refactoring is bad practice. If anyone fancies doing a latter patch to use a struct though, it might be nice.
Won't work - this need to be network endian and endian-ness is all messed up with packed structs.
The place to fix this would be in the C standard :)
Quoted 7 lines
Regards,
DanielSignature · 3 lines
|: https://berrange.com -o- https://www.flickr.com/photos/dberrange :| |: https://libvirt.org -o- https://fstop138.berrange.com :| |: https://entangle-photo.org -o- https://www.instagram.com/dberrange :|
PATCH v2 5/9 net: Add a network device specific self-announcement ability
In reply to Dr. David Alan Gilbert (git)From: "Dr. David Alan Gilbert" <[email protected]>
Some network devices have a capability to do self announcements (ex: virtio-net). Add infrastructure that would allow devices to expose this ability.
--- include/net/net.h | 2 ++ net/announce.c | 5 +++++ 2 files changed, 7 insertions(+)
include/net/net.h +2 -0
@@ -60,6 +60,7 @@ typedef int (SetVnetLE)(NetClientState *, bool);typedef int (SetVnetBE )(NetClientState *,bool );typedef struct SocketReadState SocketReadState ;typedef void (SocketReadStateFinalize )(SocketReadState *rs); +typedef void (NetAnnounce )(NetClientState *); typedef struct NetClientInfo { NetClientDriver type;
@@ -80,6 +81,7 @@ typedef struct NetClientInfo {SetVnetHdrLen *set_vnet_hdr_len;SetVnetLE *set_vnet_le;SetVnetBE *set_vnet_be; +NetAnnounce *announce; } NetClientInfo;struct NetClientState {
net/announce.c +5 -0
@@ -102,6 +102,11 @@ static void qemu_announce_self_iter(NICState *nic, void *opaque) len =announce_self_create (buf, nic->conf->macaddr.a);qemu_send_packet_raw (qemu_get_queue (nic), buf, len); + +/* if the NIC provides it's own announcement support, use it as well */ +if (nic->ncs->info->announce) { + nic->ncs->info->announce (nic->ncs); + } }static void qemu_announce_self_once (void *opaque) {
Signature · 1 line
2.20.1
PATCH v2 6/9 virtio-net: Allow qemu_announce_self to trigger virtio announcements
In reply to Dr. David Alan Gilbert (git)From: "Dr. David Alan Gilbert" <[email protected]>
Expose the virtio-net self announcement capability and allow qemu_announce_self() to call it.
These announces are caused by something external (i.e. the announce-self command); they won't trigger if the migration counter is triggering announces at the same time.
--- hw/net/trace-events | 1 + hw/net/virtio-net.c | 35 ++++++++++++++++++++++++++++++++--- 2 files changed, 33 insertions(+), 3 deletions(-)
hw/net/trace-events +1 -0
@@ -361,6 +361,7 @@ sunhme_rx_desc(uint32_t addr, int offset, uint32_t status, int len, int cr, int sunhme_rx_xsum_calc(uint16_t xsum) "calculated incoming xsum as 0x%x" # hw/net/virtio-net.c +virtio_net_announce_notify(void) "" virtio_net_announce_timer(int round) "%d" virtio_net_handle_announce(int round) "%d" virtio_net_post_load_device(void)
hw/net/virtio-net.c +32 -3
@@ -162,15 +162,42 @@ static bool virtio_net_started(VirtIONet *n, uint8_t status) (n->status &VIRTIO_NET_S_LINK_UP ) && vdev->vm_running; } +static void virtio_net_announce_notify (VirtIONet *net) +{ +VirtIODevice *vdev =VIRTIO_DEVICE (net); +trace_virtio_net_announce_notify (); + + net->status |=VIRTIO_NET_S_ANNOUNCE ; +virtio_notify_config (vdev); +} +static void virtio_net_announce_timer (void *opaque) {VirtIONet *n = opaque; -VirtIODevice *vdev =VIRTIO_DEVICE (n);trace_virtio_net_announce_timer (n->announce_timer.round); n->announce_timer.round--; - n->status |=VIRTIO_NET_S_ANNOUNCE ; -virtio_notify_config (vdev); +virtio_net_announce_notify (n); +} + +static void virtio_net_announce (NetClientState *nc) +{ +VirtIONet *n =qemu_get_nic_opaque (nc); +VirtIODevice *vdev =VIRTIO_DEVICE (n); + +/* +* Make sure the virtio migration announcement timer isn't running +* If it is, let it trigger announcement so that we do not cause +* confusion. +*/ +if (n->announce_timer.round) { +return ; + } + +if (virtio_vdev_has_feature (vdev,VIRTIO_NET_F_GUEST_ANNOUNCE ) && +virtio_vdev_has_feature (vdev,VIRTIO_NET_F_CTRL_VQ )) { +virtio_net_announce_notify (n); + } }static void virtio_net_vhost_status (VirtIONet *n,uint8_t status)
@@ -2568,6 +2595,7 @@ static NetClientInfo net_virtio_info = { .receive = virtio_net_receive, .link_status_changed = virtio_net_set_link_status, .query_rx_filter = virtio_net_query_rxfilter, + .announce = virtio_net_announce, };static bool virtio_net_guest_notifier_pending (VirtIODevice *vdev,int idx)
@@ -2709,6 +2737,7 @@ static void virtio_net_device_realize(DeviceState *dev, Error **errp)qemu_announce_timer_reset (&n->announce_timer,migrate_announce_params (),QEMU_CLOCK_VIRTUAL , virtio_net_announce_timer, n); + n->announce_timer.round =0 ;if (n->netclient_type) {/*
Signature · 1 line
2.20.1
PATCH v2 7/9 qmp: Add announce-self command
In reply to Dr. David Alan Gilbert (git)From: "Dr. David Alan Gilbert" <[email protected]>
Add a qmp command that can trigger guest announcements.
It uses its own announce-timer instance, and parameters passed to it explicitly in the command.
Like most qmp commands, it's in the main thread/bql, so there's no racing with any outstanding timer.
Based on work of Germano Veit Michel <[email protected]> and
Vladislav Yasevich <[email protected]>
--- net/announce.c | 8 ++++++++ qapi/net.json | 21 +++++++++++++++++++++ 2 files changed, 29 insertions(+)
net/announce.c +8 -0
@@ -12,6 +12,7 @@#include "net/net.h" #include "qapi/clone-visitor.h" #include "qapi/qapi-visit-net.h" +#include "qapi/qapi-commands-net.h" #include "trace.h" int64_t qemu_announce_timer_step (AnnounceTimer *timer)
@@ -131,3 +132,10 @@ void qemu_announce_self(AnnounceTimer *timer, AnnounceParameters *params)qemu_announce_timer_del (timer); } } + +void qmp_announce_self (AnnounceParameters *params,Error **errp) +{ +static AnnounceTimer announce_timer; +qemu_announce_self (&announce_timer, params); +} +
qapi/net.json +21 -0
@@ -707,3 +707,24 @@ 'max': 'int', 'rounds': 'int', 'step': 'int' } } + +## +# @announce-self: +# +# Trigger generation of broadcast RARP frames to update network switches. +# This can be useful when network bonds fail-over the active slave. +# +# @params: AnnounceParameters giving timing and repetition count of announce +# +# Example: +# +# -> { "execute": "announce-self" +# "arguments": { "params:" { +# "initial": 50, "max": 550, "rounds": 10, "step": 50 } } } +# <- { "return": {} } +# +# Since: 4.0 +## +{ 'command': 'announce-self', + 'data' : {'params': 'AnnounceParameters'} } +
Signature · 1 line
2.20.1
PATCH v2 8/9 hmp: Add hmp_announce_self
In reply to Dr. David Alan Gilbert (git)From: "Dr. David Alan Gilbert" <[email protected]>
Add an HMP command to trigger self annocements.
Unlike the QMP command (which takes a set of parameters), the HMP command reuses the set of parameters used for migration.
--- hmp-commands.hx | 14 ++++++++++++++ hmp.c | 5 +++++ hmp.h | 1 + tests/test-hmp.c | 1 + 4 files changed, 21 insertions(+)
hmp-commands.hx +14 -0
@@ -928,6 +928,20 @@ Bug: can screw up when the buffer contains invalid UTF-8 sequences, NUL characters, after the ring buffer lost data, and when reading stops because the size limit is reached. +ETEXI + + { + .name = "announce_self", + .args_type = "", + .params = "", + .help = "Trigger GARP/RARP announcements", + .cmd = hmp_announce_self, + }, + +STEXI +@item announce_self +@findex announce_self +Trigger GARP/RARP announcements. ETEXI {
hmp.c +5 -0
@@ -1570,6 +1570,11 @@ void hmp_info_snapshots(Monitor *mon, const QDict *qdict) } +void hmp_announce_self (Monitor *mon,const QDict *qdict) +{ +qmp_announce_self (migrate_announce_params (),NULL ); +} +void hmp_migrate_cancel (Monitor *mon,const QDict *qdict) {qmp_migrate_cancel (NULL );
hmp.h +1 -0
@@ -46,6 +46,7 @@ void hmp_sync_profile(Monitor *mon, const QDict *qdict);void hmp_system_reset (Monitor *mon,const QDict *qdict);void hmp_system_powerdown (Monitor *mon,const QDict *qdict);void hmp_exit_preconfig (Monitor *mon,const QDict *qdict); +void hmp_announce_self (Monitor *mon,const QDict *qdict);void hmp_cpu (Monitor *mon,const QDict *qdict);void hmp_memsave (Monitor *mon,const QDict *qdict);void hmp_pmemsave (Monitor *mon,const QDict *qdict);
tests/test-hmp.c +1 -0
@@ -20,6 +20,7 @@static int verbose;static const char *hmp_cmds[] = { +"announce_self" ,"boot_set ndc" ,"chardev-add null,id=testchardev1" ,"chardev-send-break testchardev1" ,
Signature · 1 line
2.20.1
PATCH v2 9/9 tests: Add a test for qemu self announcements
In reply to Dr. David Alan Gilbert (git)From: "Dr. David Alan Gilbert" <[email protected]>
We now expose qemu_announce_self through QMP and HMP. Add a test with some very basic packet validation (make sure we get a RARP).
--- tests/Makefile.include | 2 + tests/test-announce-self.c | 83 ++++++++++++++++++++++++++++++++++++++ 2 files changed, 85 insertions(+) create mode 100644 tests/test-announce-self.c
tests/Makefile.include +2 -0
@@ -143,6 +143,8 @@ check-qtest-generic-y += tests/qmp-cmd-test$(EXESUF) check-qtest-generic-y += tests/device-introspect-test$(EXESUF) check-qtest-generic-y += tests/cdrom-test$(EXESUF) +check-qtest-generic-y += tests/test-announce-self$(EXESUF) +gcov-files-generic-y = migration/savevm.c check-qtest-ipack-y += tests/ipoctal232-test$(EXESUF)
tests/test-announce-self.c new file +83 -0
83 lines not on this page · raw message
Signature · 1 line
2.20.1