Skip to contentSkip to conversation

net: ethernet: ti: Introduce am654 gigabit eth switch subsystem driver

PATCH Superseded Keerthy 2 participants 2 messages Feb 4, 2019 Network drivers

v3 of 6 Superseded Latest is v6 →

lore
Share & tools
lore

Keerthy

author
#0 lore raw

PATCH v3 2/5 net: ethernet: ti: Introduce am654 gigabit eth switch subsystem driver

From: Grygorii Strashko <[email protected]>

Add new driver for the TI AM65x SoC Gigabit Ethernet Switch subsystem (CPSW NUSS). It has two ports and provides Ethernet packet communication for the device and can be configured as an Ethernet switch. CPSW NUSS features: the Reduced Gigabit Media Independent Interface (RGMII), Reduced Media Independent Interface (RMII), and the Management Data Input/Output (MDIO) interface for physical layer device (PHY) management. The TI AM65x SoC has integrated two-port Gigabit Ethernet Switch subsystem into device MCU domain named MCU_CPSW0. One Ethernet port (port 1) with selectable RGMII and RMII interfaces and an internal Communications Port Programming Interface (CPPI) port (Host port 0).

Host Port 0 CPPI Packet Streaming Interface interface supports 8 TX channels and on RX channels operating by TI am654 NAVSS Unified DMA Peripheral Root Complex (UDMA-P) controller.

---

Changes in v3:

* Corrected $Author

Changes in v2:

* Removed the debug macros and replaced them with pr_err where necessory

 drivers/net/ti/Kconfig          |   8 +
 drivers/net/ti/Makefile         |   1 +
 drivers/net/ti/am65-cpsw-nuss.c | 794 ++++++++++++++++++++++++++++++++
 3 files changed, 803 insertions(+)
 create mode 100644 drivers/net/ti/am65-cpsw-nuss.c
drivers/net/ti/Kconfig +8 -0
index 82bc9f5d03..ecf642de10 100644
@@ -18,3 +18,11 @@ config DRIVER_TI_KEYSTONE_NET
 	bool "TI Keystone 2 Ethernet"
 	help
 	   This driver supports the TI Keystone 2 Ethernet subsystem
+
+config TI_AM65_CPSW_NUSS
+	bool "TI K3 AM65x MCU CPSW Nuss Ethernet controller driver"
+	depends on ARCH_K3
+	select PHYLIB
+	help
+	  This driver supports TI K3 MCU CPSW Nuss Ethernet controller
+	  in Texas Instruments K3 AM65x SoCs.
drivers/net/ti/Makefile +1 -0
index ee3e4eb5d6..8d3808bb4b 100644
@@ -5,3 +5,4 @@
 obj-$(CONFIG_DRIVER_TI_CPSW) += cpsw.o cpsw-common.o cpsw_mdio.o
 obj-$(CONFIG_DRIVER_TI_EMAC) += davinci_emac.o
 obj-$(CONFIG_DRIVER_TI_KEYSTONE_NET) += keystone_net.o cpsw_mdio.o
+obj-$(CONFIG_TI_AM65_CPSW_NUSS) += am65-cpsw-nuss.o cpsw_mdio.o
drivers/net/ti/am65-cpsw-nuss.c new file +794 -0

794 lines not on this page · raw message

Signature · 1 line
2.17.1
#1 lore raw

PATCH v3 2/5 net: ethernet: ti: Introduce am654 gigabit eth switch subsystem driver

Quoted 13 lines · Keerthy

From: Grygorii Strashko <[email protected]>

Add new driver for the TI AM65x SoC Gigabit Ethernet Switch subsystem (CPSW NUSS). It has two ports and provides Ethernet packet communication for the device and can be configured as an Ethernet switch. CPSW NUSS features: the Reduced Gigabit Media Independent Interface (RGMII), Reduced Media Independent Interface (RMII), and the Management Data Input/Output (MDIO) interface for physical layer device (PHY) management. The TI AM65x SoC has integrated two-port Gigabit Ethernet Switch subsystem into device MCU domain named MCU_CPSW0. One Ethernet port (port 1) with selectable RGMII and RMII interfaces and an internal Communications Port Programming Interface (CPPI) port (Host port 0).

Quoted 6 lines

Host Port 0 CPPI Packet Streaming Interface interface supports 8 TX channels and on RX channels operating by TI am654 NAVSS Unified DMA Peripheral Root Complex (UDMA-P) controller.

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190204/8e2e0f8a/attachment.sig>