configs: Minor fixes
cover configs: Minor fixes
Hei hei,
two small patches. One is some missing piece in a defconfig for Microchip SAMA5D27-SOM1-EK1 board. The other one is something I stumbled over by accident.
Greets
Alex
Alexander Dahl (2):
configs: Remove version control leftovers
configs: sama5d27_som1_ek: Activate misc init for uSD variant
configs/kylin-rk3036_defconfig.rej | 10 ---------- configs/puma-rk3399_defconfig.rej | 10 ---------- configs/sama5d27_som1_ek_mmc1_defconfig | 1 + 3 files changed, 1 insertion(+), 20 deletions(-) delete mode 100644 configs/kylin-rk3036_defconfig.rej delete mode 100644 configs/puma-rk3399_defconfig.rej
Signature · 1 line
2.11.0
PATCH 1/2 configs: Remove version control leftovers
I assume those should not have been committed in the first place?
--- configs/kylin-rk3036_defconfig.rej | 10 ---------- configs/puma-rk3399_defconfig.rej | 10 ---------- 2 files changed, 20 deletions(-) delete mode 100644 configs/kylin-rk3036_defconfig.rej delete mode 100644 configs/puma-rk3399_defconfig.rej
configs/kylin-rk3036_defconfig.rej deleted +0 -10
@@ -1,10 +0,0 @@ ---- configs/kylin-rk3036_defconfig -+++ configs/kylin-rk3036_defconfig -@@ -8,6 +8,7 @@ CONFIG_ROCKCHIP_RK3036=y - CONFIG_TARGET_KYLIN_RK3036=y - CONFIG_SPL_STACK_R_ADDR=0x80000 - CONFIG_DEFAULT_DEVICE_TREE="rk3036-sdk" -+CONFIG_DEBUG_UART=y - CONFIG_SPL_SYS_MALLOC_F_LEN=0x0 - # CONFIG_ANDROID_BOOT_IMAGE is not set - # CONFIG_DISPLAY_CPUINFO is not set
configs/puma-rk3399_defconfig.rej deleted +0 -10
@@ -1,10 +0,0 @@ ---- configs/puma-rk3399_defconfig -+++ configs/puma-rk3399_defconfig -@@ -74,7 +74,6 @@ CONFIG_ETH_DESIGNWARE=y - CONFIG_GMAC_ROCKCHIP=y - CONFIG_PINCTRL=y - CONFIG_SPL_PINCTRL=y --CONFIG_PINCTRL_ROCKCHIP_RK3399=y - CONFIG_DM_PMIC=y - CONFIG_DM_PMIC_FAN53555=y - CONFIG_PMIC_RK8XX=y
Signature · 1 line
2.11.0
PATCH 1/2 configs: Remove version control leftovers
Alexander,
there’s a PR for this open already:
https://patchwork.ozlabs.org/patch/1036561/
Sorry for the inconvenience.
Philipp.
Quoted 52 lines · Alexander Dahl
I assume those should not have been committed in the first place?
Fixes 2ec3d25f8faab51c2334174a582a96ad28d96344Signed-off-by Alexander Dahl <[email protected]>---
configs/kylin-rk3036_defconfig.rej | 10 ---------- configs/puma-rk3399_defconfig.rej | 10 ----------2 files changed, 20 deletions(-)delete mode 100644 configs/kylin-rk3036_defconfig.rej delete mode 100644 configs/puma-rk3399_defconfig.rej
configs/kylin-rk3036_defconfig.rej deleted +0
-10@@ -1,10 +0,0 @@ ---- configs/kylin-rk3036_defconfig -+++ configs/kylin-rk3036_defconfig -@@ -8,6 +8,7 @@ CONFIG_ROCKCHIP_RK3036=y - CONFIG_TARGET_KYLIN_RK3036=y - CONFIG_SPL_STACK_R_ADDR=0x80000 - CONFIG_DEFAULT_DEVICE_TREE="rk3036-sdk" -+CONFIG_DEBUG_UART=y - CONFIG_SPL_SYS_MALLOC_F_LEN=0x0 - # CONFIG_ANDROID_BOOT_IMAGE is not set - # CONFIG_DISPLAY_CPUINFO is not setconfigs/puma-rk3399_defconfig.rej deleted +0
-10@@ -1,10 +0,0 @@ ---- configs/puma-rk3399_defconfig -+++ configs/puma-rk3399_defconfig -@@ -74,7 +74,6 @@ CONFIG_ETH_DESIGNWARE=y - CONFIG_GMAC_ROCKCHIP=y - CONFIG_PINCTRL=y - CONFIG_SPL_PINCTRL=y --CONFIG_PINCTRL_ROCKCHIP_RK3399=y - CONFIG_DM_PMIC=y - CONFIG_DM_PMIC_FAN53555=y - CONFIG_PMIC_RK8XX=ySignature · 6 lines
2.11.0 _______________________________________________ U-Boot mailing list U-Boot at lists.denx.de https://lists.denx.de/listinfo/u-boot
PATCH 2/2 configs: sama5d27_som1_ek: Activate misc init for uSD variant
In reply to Alexander DahlThis was already set for 'sama5d27_som1_ek_mmc_defconfig' (first SD card, full size). Without this option set, the MAC address is not read from the I²C EEPROM at boot, and remains unset:
U-Boot 2019.01 (Jan 01 2019 - 00:00:00 +0000)
CPU: SAMA5D27 1G bits DDR2 SDRAM
Crystal frequency: 24 MHz
CPU clock : 492 MHz
Master clock : 164 MHz
DRAM: 128 MiB
MMC: sdio-host at a0000000: 0, sdio-host at b0000000: 1
Loading Environment from FAT... OK
In: serial
Out: serial
Err: serial
Net:
Error: ethernet at f8008000 address not set.
eth-1: ethernet at f8008000
Hit any key to stop autoboot: 0
--- configs/sama5d27_som1_ek_mmc1_defconfig | 1 + 1 file changed, 1 insertion(+)
configs/sama5d27_som1_ek_mmc1_defconfig +1 -0
@@ -23,6 +23,7 @@ CONFIG_SD_BOOT=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk root=/dev/mmcblk1p2 rw rootwait" +CONFIG_MISC_INIT_R=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SPL_SEPARATE_BSS=y CONFIG_HUSH_PARSER=y
Signature · 1 line
2.11.0
PATCH 2/2 configs: sama5d27_som1_ek: Activate misc init for uSD variant
Quoted 21 lines · Alexander Dahl
This was already set for '
sama5d27_som1_ek_mmc_defconfig' (first SD card, full size). Without this option set, the MAC address is not read from the I²C EEPROM at boot, and remains unset:U-Boot 2019.01 (Jan 01 2019 - 00:00:00 +0000)
CPU: SAMA5D27 1G bits DDR2 SDRAM
Crystal frequency: 24 MHz
CPU clock : 492 MHz
Master clock : 164 MHz
DRAM: 128 MiB
MMC: sdio-host ata0000000: 0, sdio-host atb0000000: 1
Loading Environment from FAT... OK
In: serial
Out: serial
Err: serial
Net:
Error: ethernet atf8008000address not set.
eth-1: ethernet atf8008000
Hit any key to stop autoboot: 0
Quoted 1 line
Signed-off-by Alexander Dahl <[email protected]>
Applied to u-boot-atmel/master
Thanks !