Skip to contentSkip to conversation

configs: arndale: Use appropriate driver for Asix AX88760

U-Boot Krzysztof Kozlowski 2 participants 2 messages Feb 21, 2019

lore
Share & tools
lore
#0 lore raw

Arndale board has an Asix AX88760 USB 2.0 Hub and Fast Ethernet combo. The appropriate driver for it is USB_ETHER_ASIX.

The mistake probably came from misinterpretation of commit e9954b867ce0 ("usb: eth: add ASIX AX88179 DRIVER") which was tested on RECS5250 COM module. This module indeed has Exynos5250 and some similarities with Arndale 5250 board but the USB/Ethernet chip used there is apparently different.

Fixes f58ad98a621c ("usb: net: migrate USB Ethernet adapters to Kconfig")

---

Not tested.

---
 configs/arndale_defconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
configs/arndale_defconfig +1 -1
index 24422645cbac..b1f20b915889 100644
@@ -41,4 +41,4 @@ CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_HOST_ETHER=y
-CONFIG_USB_ETHER_ASIX88179=y
+CONFIG_USB_ETHER_ASIX=y
Signature · 1 line
2.17.1
Reviewed-by
#1 lore raw
Quoted 24 lines · On Thu, 21 Feb 2019 18:08:12 +0100 Krzysztof Kozlowski <[email protected]> wrote:

Arndale board has an Asix AX88760 USB 2.0 Hub and Fast Ethernet combo. The appropriate driver for it is USB_ETHER_ASIX.

The mistake probably came from misinterpretation of commit e9954b867ce0 ("usb: eth: add ASIX AX88179 DRIVER") which was tested on RECS5250 COM module. This module indeed has Exynos5250 and some similarities with Arndale 5250 board but the USB/Ethernet chip used there is apparently different.

Fixes f58ad98a621c ("usb: net: migrate USB Ethernet adapters to

Kconfig") Signed-off-by: Krzysztof Kozlowski <[email protected]>

---

Not tested.

---
 configs/arndale_defconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
configs/arndale_defconfig +0 -0
index 24422645cbac..b1f20b915889 100644

configs/arndale_defconfig CONFIG_USB_XHCI_HCD=y · line 44

Quoted 5 lines
configs/arndale_defconfig +1 -1
@@ -41,4 +41,4 @@ CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_HOST_ETHER=y
-CONFIG_USB_ETHER_ASIX88179=y
+CONFIG_USB_ETHER_ASIX=y

Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de -------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190221/c00f2788/attachment.sig>