Skip to contentSkip to conversation

Add Support for NAND in dra71x-evm

PATCH Superseded Faiz Abbas 2 participants 12 messages Feb 27, 2019 – Apr 12, 2019

lore
Share & tools
lore

Faiz Abbas

author
#0 lore raw

v2 cover Add Support for NAND in dra71x-evm

The following patches add support for NAND and booting from NAND in dra71x-evm.

v2:
Patch4: Moved NANDARGS to its own file in include/environment/ti

Faiz Abbas (2):
configs: dra71x-evm: Add Support for NAND
configs: ti_omap5_common: Add NAND environment settings

Franklin S Cooper Jr (2):
board: ti: dra71: Add pinmux settings for NAND on DRA71x EVM
arm: dra7: Allow NAND to be enabled on DRA71x EVM.

 board/ti/dra7xx/evm.c             | 56 +++++++++++++++++++++++++++++
 board/ti/dra7xx/mux_data.h        | 60 ++++++++++++++++++++++---------
 configs/dra7xx_evm_defconfig      |  7 +++-
 configs/dra7xx_hs_evm_defconfig   |  7 +++-
 include/configs/dra7xx_evm.h      |  2 +-
 include/configs/ti_omap5_common.h |  3 +-
 include/environment/ti/nand.h     | 26 ++++++++++++++
 7 files changed, 141 insertions(+), 20 deletions(-)
 create mode 100644 include/environment/ti/nand.h
Signature · 1 line
2.19.2
author
#1 lore raw

PATCH v2 1/4 board: ti: dra71: Add pinmux settings for NAND on DRA71x EVM

From: Franklin S Cooper Jr <[email protected]>

By default VOUT3 occupies the pins required for NAND. Therefore, create a seperate entry that can be use to reconfigure these pins to work for NAND.

On the EVM SWITCH 8 pins 0 and 1 will be used to determine if NAND is enabled or not. For NAND to be selected pin 0 should be on and pin 1 should be off. Any other combination will assume NAND shouldn't be enabled.

---
 board/ti/dra7xx/mux_data.h | 60 ++++++++++++++++++++++++++++----------
 1 file changed, 44 insertions(+), 16 deletions(-)
board/ti/dra7xx/mux_data.h +44 -16
index f1f6bd5316..75da5cb608 100644
@@ -220,22 +220,6 @@ const struct pad_conf_entry dra72x_rgmii_padconf_array_revc[] = {
 };
 
 const struct pad_conf_entry dra71x_core_padconf_array[] = {
-	{GPMC_AD0, (M3 | PIN_INPUT)},	/* gpmc_ad0.vout3_d0 */
-	{GPMC_AD1, (M3 | PIN_INPUT)},	/* gpmc_ad1.vout3_d1 */
-	{GPMC_AD2, (M3 | PIN_INPUT)},	/* gpmc_ad2.vout3_d2 */
-	{GPMC_AD3, (M3 | PIN_INPUT)},	/* gpmc_ad3.vout3_d3 */
-	{GPMC_AD4, (M3 | PIN_INPUT)},	/* gpmc_ad4.vout3_d4 */
-	{GPMC_AD5, (M3 | PIN_INPUT)},	/* gpmc_ad5.vout3_d5 */
-	{GPMC_AD6, (M3 | PIN_INPUT)},	/* gpmc_ad6.vout3_d6 */
-	{GPMC_AD7, (M3 | PIN_INPUT)},	/* gpmc_ad7.vout3_d7 */
-	{GPMC_AD8, (M3 | PIN_INPUT)},	/* gpmc_ad8.vout3_d8 */
-	{GPMC_AD9, (M3 | PIN_INPUT)},	/* gpmc_ad9.vout3_d9 */
-	{GPMC_AD10, (M3 | PIN_INPUT)},	/* gpmc_ad10.vout3_d10 */
-	{GPMC_AD11, (M3 | PIN_INPUT)},	/* gpmc_ad11.vout3_d11 */
-	{GPMC_AD12, (M3 | PIN_INPUT)},	/* gpmc_ad12.vout3_d12 */
-	{GPMC_AD13, (M3 | PIN_INPUT)},	/* gpmc_ad13.vout3_d13 */
-	{GPMC_AD14, (M3 | PIN_INPUT)},	/* gpmc_ad14.vout3_d14 */
-	{GPMC_AD15, (M3 | PIN_INPUT)},	/* gpmc_ad15.vout3_d15 */
 	{GPMC_A0, (M3 | PIN_INPUT_PULLDOWN)},	/* gpmc_a0.vout3_d16 */
 	{GPMC_A1, (M3 | PIN_INPUT_PULLDOWN)},	/* gpmc_a1.vout3_d17 */
 	{GPMC_A2, (M3 | PIN_INPUT_PULLDOWN)},	/* gpmc_a2.vout3_d18 */
@@ -370,6 +354,50 @@ const struct pad_conf_entry dra71x_core_padconf_array[] = {
 	{WAKEUP3, (M1 | PULL_ENA | PULL_UP)},	/* Wakeup3.sys_nirq1 */
 };
 
+const struct pad_conf_entry dra71x_vout3_padconf_array[] = {
+	{GPMC_AD0, (M3 | PIN_INPUT)},	/* gpmc_ad0.vout3_d0 */
+	{GPMC_AD1, (M3 | PIN_INPUT)},	/* gpmc_ad1.vout3_d1 */
+	{GPMC_AD2, (M3 | PIN_INPUT)},	/* gpmc_ad2.vout3_d2 */
+	{GPMC_AD3, (M3 | PIN_INPUT)},	/* gpmc_ad3.vout3_d3 */
+	{GPMC_AD4, (M3 | PIN_INPUT)},	/* gpmc_ad4.vout3_d4 */
+	{GPMC_AD5, (M3 | PIN_INPUT)},	/* gpmc_ad5.vout3_d5 */
+	{GPMC_AD6, (M3 | PIN_INPUT)},	/* gpmc_ad6.vout3_d6 */
+	{GPMC_AD7, (M3 | PIN_INPUT)},	/* gpmc_ad7.vout3_d7 */
+	{GPMC_AD8, (M3 | PIN_INPUT)},	/* gpmc_ad8.vout3_d8 */
+	{GPMC_AD9, (M3 | PIN_INPUT)},	/* gpmc_ad9.vout3_d9 */
+	{GPMC_AD10, (M3 | PIN_INPUT)},	/* gpmc_ad10.vout3_d10 */
+	{GPMC_AD11, (M3 | PIN_INPUT)},	/* gpmc_ad11.vout3_d11 */
+	{GPMC_AD12, (M3 | PIN_INPUT)},	/* gpmc_ad12.vout3_d12 */
+	{GPMC_AD13, (M3 | PIN_INPUT)},	/* gpmc_ad13.vout3_d13 */
+	{GPMC_AD14, (M3 | PIN_INPUT)},	/* gpmc_ad14.vout3_d14 */
+	{GPMC_AD15, (M3 | PIN_INPUT)},	/* gpmc_ad15.vout3_d15 */
+};
+
+const struct pad_conf_entry dra71x_nand_padconf_array[] = {
+	{GPMC_AD0, (M0 | PIN_INPUT)},	/* gpmc_ad0.gpmc_ad0 */
+	{GPMC_AD1, (M0 | PIN_INPUT)},	/* gpmc_ad1.gpmc_ad1 */
+	{GPMC_AD2, (M0 | PIN_INPUT)},	/* gpmc_ad2.gpmc_ad2 */
+	{GPMC_AD3, (M0 | PIN_INPUT)},	/* gpmc_ad3.gpmc_ad3 */
+	{GPMC_AD4, (M0 | PIN_INPUT)},	/* gpmc_ad4.gpmc_ad4 */
+	{GPMC_AD5, (M0 | PIN_INPUT)},	/* gpmc_ad5.gpmc_ad5 */
+	{GPMC_AD6, (M0 | PIN_INPUT)},	/* gpmc_ad6.gpmc_ad6 */
+	{GPMC_AD7, (M0 | PIN_INPUT)},	/* gpmc_ad7.gpmc_ad7 */
+	{GPMC_AD8, (M0 | PIN_INPUT)},	/* gpmc_ad8.gpmc_ad8 */
+	{GPMC_AD9, (M0 | PIN_INPUT)},	/* gpmc_ad9.gpmc_ad9 */
+	{GPMC_AD10, (M0 | PIN_INPUT)},	/* gpmc_ad10.gpmc_ad10 */
+	{GPMC_AD11, (M0 | PIN_INPUT)},	/* gpmc_ad11.gpmc_ad11 */
+	{GPMC_AD12, (M0 | PIN_INPUT)},	/* gpmc_ad12.gpmc_ad12 */
+	{GPMC_AD13, (M0 | PIN_INPUT)},	/* gpmc_ad13.gpmc_ad13 */
+	{GPMC_AD14, (M0 | PIN_INPUT)},	/* gpmc_ad14.gpmc_ad14 */
+	{GPMC_AD15, (M0 | PIN_INPUT)},	/* gpmc_ad15.gpmc_ad15 */
+	{GPMC_CS0, (M0 | PIN_INPUT_PULLUP)},	/* gpmc_cs0.gpmc_cs0 */
+	{GPMC_ADVN_ALE, (M0 | PIN_INPUT_PULLDOWN)},	/* gpmc_advn_ale.gpmc_advn_ale */
+	{GPMC_OEN_REN, (M0 | PIN_INPUT_PULLUP)},	/* gpmc_oen_ren.gpmc_oen_ren */
+	{GPMC_WEN, (M0 | PIN_INPUT_PULLUP)},	/* gpmc_wen.gpmc_wen */
+	{GPMC_BEN0, (M0 | PIN_INPUT_PULLDOWN)},	/* gpmc_ben0.gpmc_ben0 */
+	{GPMC_WAIT0, (M0 | PIN_INPUT_PULLUP | SLEWCONTROL)},	/* gpmc_wait0.gpmc_wait0 */
+};
+
 const struct pad_conf_entry early_padconf[] = {
 	{UART1_RXD, (PIN_INPUT_SLEW | M0)}, /* UART1_RXD */
 	{UART1_TXD, (PIN_INPUT_SLEW | M0)}, /* UART1_TXD */
Signature · 1 line
2.19.2
#2 lore raw

PATCH v2 1/4 board: ti: dra71: Add pinmux settings for NAND on DRA71x EVM

Quoted 6 lines · Faiz Abbas

From: Franklin S Cooper Jr <[email protected]>

By default VOUT3 occupies the pins required for NAND. Therefore, create a seperate entry that can be use to reconfigure these pins to work for NAND.

Quoted 7 lines

On the EVM SWITCH 8 pins 0 and 1 will be used to determine if NAND is enabled or not. For NAND to be selected pin 0 should be on and pin 1 should be off. Any other combination will assume NAND shouldn't be enabled.

Applied to u-boot/master, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190412/9f46421c/attachment.sig>
author
#3 lore raw

PATCH v2 2/4 arm: dra7: Allow NAND to be enabled on DRA71x EVM.

In reply to Faiz Abbas

From: Franklin S Cooper Jr <[email protected]>

If SW 8 pins 0 and 1 indicate that NAND should be enabled then the pins pinmux must be reconfigured for NAND mode.

Therefore, enable NAND by reconfiguring the pinmux.

---
 board/ti/dra7xx/evm.c | 56 +++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 56 insertions(+)
board/ti/dra7xx/evm.c +56 -0
index d69641e3a0..446ce8399c 100644
@@ -27,6 +27,7 @@
 #include <environment.h>
 #include <dwc3-uboot.h>
 #include <dwc3-omap-uboot.h>
+#include <i2c.h>
 #include <ti-usb-phy-uboot.h>
 #include <miiphy.h>
 
@@ -55,6 +56,10 @@ DECLARE_GLOBAL_DATA_PTR;
 
 #define SYSINFO_BOARD_NAME_MAX_LEN	37
 
+/* I2C I/O Expander */
+#define NAND_PCF8575_ADDR	0x21
+#define NAND_PCF8575_I2C_BUS_NUM	0
+
 const struct omap_sysinfo sysinfo = {
 	"Board: UNKNOWN(DRA7 EVM) REV UNKNOWN\n"
 };
@@ -777,6 +782,44 @@ void set_muxconf_regs(void)
 		     early_padconf, ARRAY_SIZE(early_padconf));
 }
 
+#if defined(CONFIG_NAND)
+static int nand_sw_detect(void)
+{
+	int rc;
+	uchar data[2];
+	struct udevice *dev;
+
+	rc = i2c_get_chip_for_busnum(NAND_PCF8575_I2C_BUS_NUM,
+				     NAND_PCF8575_ADDR, 0, &dev);
+	if (rc)
+		return -1;
+
+	rc = dm_i2c_read(dev, 0, (uint8_t *)&data, sizeof(data));
+	if (rc)
+		return -1;
+
+	/* We are only interested in P10 and P11 on PCF8575 which is equal to
+	 * bits 8 and 9.
+	 */
+	data[1] = data[1] & 0x3;
+
+	/* Ensure only P11 is set and P10 is cleared. This ensures only
+	 * NAND (P10) is configured and not NOR (P11) which are both low
+	 * true signals. NAND and NOR settings should not be enabled at
+	 * the same time.
+	 */
+	if (data[1] == 0x2)
+		return 0;
+
+	return -1;
+}
+#else
+int nand_sw_detect(void)
+{
+	return -1;
+}
+#endif
+
 #ifdef CONFIG_IODELAY_RECALIBRATION
 void recalibrate_iodelay(void)
 {
@@ -796,6 +839,19 @@ void recalibrate_iodelay(void)
 			npads = ARRAY_SIZE(dra71x_core_padconf_array);
 			iodelay = dra71_iodelay_cfg_array;
 			niodelays = ARRAY_SIZE(dra71_iodelay_cfg_array);
+			/* If SW8 on the EVM is set to enable NAND then
+			 * overwrite the pins used by VOUT3 with NAND.
+			 */
+			if (!nand_sw_detect()) {
+				delta_pads = dra71x_nand_padconf_array;
+				delta_npads =
+					ARRAY_SIZE(dra71x_nand_padconf_array);
+			} else {
+				delta_pads = dra71x_vout3_padconf_array;
+				delta_npads =
+					ARRAY_SIZE(dra71x_vout3_padconf_array);
+			}
+
 		} else if (board_is_dra72x_revc_or_later()) {
 			delta_pads = dra72x_rgmii_padconf_array_revc;
 			delta_npads =
Signature · 1 line
2.19.2
#4 lore raw

PATCH v2 2/4 arm: dra7: Allow NAND to be enabled on DRA71x EVM.

Quoted 9 lines · Faiz Abbas

From: Franklin S Cooper Jr <[email protected]>

If SW 8 pins 0 and 1 indicate that NAND should be enabled then the pins pinmux must be reconfigured for NAND mode.

Therefore, enable NAND by reconfiguring the pinmux.

Applied to u-boot/master, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190412/a5933c76/attachment.sig>
author
#5 lore raw

PATCH v2 3/4 configs: dra71x-evm: Add Support for NAND

In reply to Faiz Abbas

Add NAND support to dra71x-evm defconfig

---
 configs/dra7xx_evm_defconfig    | 3 +++
 configs/dra7xx_hs_evm_defconfig | 3 +++
 2 files changed, 6 insertions(+)
configs/dra7xx_evm_defconfig +3 -0
index 3f25a2ec28..d71d989c4c 100644
@@ -28,6 +28,7 @@ CONFIG_SPL_OS_BOOT=y
 CONFIG_SPL_SPI_LOAD=y
 CONFIG_CMD_SPL=y
 # CONFIG_CMD_FLASH is not set
+CONFIG_CMD_NAND=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_OF_CONTROL=y
 CONFIG_SPL_OF_CONTROL=y
@@ -66,6 +67,8 @@ CONFIG_MMC_UHS_SUPPORT=y
 CONFIG_MMC_HS200_SUPPORT=y
 CONFIG_SPL_MMC_HS200_SUPPORT=y
 CONFIG_MMC_OMAP_HS=y
+CONFIG_NAND=y
+CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
 CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_SPANSION=y
configs/dra7xx_hs_evm_defconfig +3 -0
index ee28e0c6ec..4642da3c01 100644
@@ -32,6 +32,7 @@ CONFIG_SPL_DMA_SUPPORT=y
 # CONFIG_SPL_NAND_SUPPORT is not set
 CONFIG_SPL_SPI_LOAD=y
 # CONFIG_CMD_FLASH is not set
+CONFIG_CMD_NAND=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_OF_CONTROL=y
 CONFIG_SPL_OF_CONTROL=y
@@ -70,6 +71,8 @@ CONFIG_MMC_UHS_SUPPORT=y
 CONFIG_MMC_HS200_SUPPORT=y
 CONFIG_SPL_MMC_HS200_SUPPORT=y
 CONFIG_MMC_OMAP_HS=y
+CONFIG_NAND=y
+CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
 CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_SPANSION=y
Signature · 1 line
2.19.2
#6 lore raw

PATCH v2 3/4 configs: dra71x-evm: Add Support for NAND

Quoted 3 lines · Faiz Abbas

Add NAND support to dra71x-evm defconfig

Applied to u-boot/master, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190412/219aa75b/attachment.sig>
author
#7 lore raw

PATCH v2 4/4 configs: ti_omap5_common: Add NAND environment settings

In reply to Faiz Abbas

Now that NAND is supported on DRA71x include various NAND environment settings

---
 configs/dra7xx_evm_defconfig      |  4 +++-
 configs/dra7xx_hs_evm_defconfig   |  4 +++-
 include/configs/dra7xx_evm.h      |  2 +-
 include/configs/ti_omap5_common.h |  3 ++-
 include/environment/ti/nand.h     | 26 ++++++++++++++++++++++++++
 5 files changed, 35 insertions(+), 4 deletions(-)
 create mode 100644 include/environment/ti/nand.h
configs/dra7xx_evm_defconfig +3 -1
index d71d989c4c..68eab7184e 100644
@@ -23,13 +23,15 @@ CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 CONFIG_SPL_SEPARATE_BSS=y
 CONFIG_SPL_DMA_SUPPORT=y
-# CONFIG_SPL_NAND_SUPPORT is not set
 CONFIG_SPL_OS_BOOT=y
 CONFIG_SPL_SPI_LOAD=y
 CONFIG_CMD_SPL=y
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_NAND=y
 # CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_MTDPARTS=y
+CONFIG_MTDIDS_DEFAULT="nand0=nand.0"
+CONFIG_MTDPARTS_DEFAULT="mtdparts=nand.0:256k(NAND.SPL),256k(NAND.SPL.backup1),256k(NAND.SPL.backup2),256k(NAND.SPL.backup3),256k(NAND.u-boot-spl-os),2m(NAND.u-boot),128k(NAND.u-boot-env),128k(NAND.u-boot-env.backup1),8m(NAND.kernel),-(NAND.file-system)"
 CONFIG_OF_CONTROL=y
 CONFIG_SPL_OF_CONTROL=y
 CONFIG_DEFAULT_DEVICE_TREE="dra7-evm"
configs/dra7xx_hs_evm_defconfig +3 -1
index 4642da3c01..076c800332 100644
@@ -33,7 +33,9 @@ CONFIG_SPL_DMA_SUPPORT=y
 CONFIG_SPL_SPI_LOAD=y
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_NAND=y
-# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_MTDPARTS=y
+CONFIG_MTDIDS_DEFAULT="nand0=nand.0"
+CONFIG_MTDPARTS_DEFAULT="mtdparts=nand.0:256k(NAND.SPL),256k(NAND.SPL.backup1),256k(NAND.SPL.backup2),256k(NAND.SPL.backup3),256k(NAND.u-boot-spl-os),2m(NAND.u-boot),128k(NAND.u-boot-env),128k(NAND.u-boot-env.backup1),8m(NAND.kernel),-(NAND.file-system)"
 CONFIG_OF_CONTROL=y
 CONFIG_SPL_OF_CONTROL=y
 CONFIG_DEFAULT_DEVICE_TREE="dra7-evm"
include/configs/dra7xx_evm.h +1 -1
index f36a9c3e08..955d315608 100644
@@ -136,7 +136,7 @@
 					 50, 51, 52, 53, 54, 55, 56, 57, }
 #define CONFIG_SYS_NAND_ECCSIZE		512
 #define CONFIG_SYS_NAND_ECCBYTES	14
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x000c0000
+#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x00140000
 /* NAND: SPL related configs */
 /* NAND: SPL falcon mode configs */
 #ifdef CONFIG_SPL_OS_BOOT
include/configs/ti_omap5_common.h +2 -1
index ba57c40182..7c08e47d3d 100644
@@ -56,6 +56,7 @@
 
 #include <environment/ti/boot.h>
 #include <environment/ti/mmc.h>
+#include <environment/ti/nand.h>
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	DEFAULT_LINUX_BOOT_ENV \
@@ -65,6 +66,7 @@
 	DEFAULT_FDT_TI_ARGS \
 	DFUARGS \
 	NETARGS \
+	NANDARGS \
 
 /*
  * SPL related defines.  The Public RAM memory map the ROM defines the
@@ -100,7 +102,6 @@
 
 #define CONFIG_SYS_SPL_ARGS_ADDR	(CONFIG_SYS_SDRAM_BASE + \
 					 (128 << 20))
-
 #ifdef CONFIG_SPL_BUILD
 #undef CONFIG_TIMER
 #endif
include/environment/ti/nand.h new file +26 -0
new file mode 100644
index 0000000000..f838cb3ed1
@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * Environment variable definitions for NAND on TI boards.
+ */
+
+#ifdef CONFIG_NAND
+#define NANDARGS \
+	"mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
+	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
+	"nandargs=setenv bootargs console=${console} " \
+		"${optargs} " \
+		"root=${nandroot} " \
+		"rootfstype=${nandrootfstype}\0" \
+	"nandroot=ubi0:rootfs rw ubi.mtd=NAND.file-system,2048\0" \
+	"nandrootfstype=ubifs rootwait=1\0" \
+	"nandboot=echo Booting from nand ...; " \
+		"run nandargs; " \
+		"nand read ${fdtaddr} NAND.u-boot-spl-os; " \
+		"nand read ${loadaddr} NAND.kernel; " \
+		"bootz ${loadaddr} - ${fdtaddr}\0"
+#else
+#define NANDARGS ""
+#endif
+
Signature · 1 line
2.19.2
#8 lore raw

PATCH v2 4/4 configs: ti_omap5_common: Add NAND environment settings

Quoted 4 lines · Faiz Abbas

Now that NAND is supported on DRA71x include various NAND environment settings

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190227/cec3245c/attachment.sig>
#9 lore raw

PATCH v2 4/4 configs: ti_omap5_common: Add NAND environment settings

In reply to Faiz Abbas
Quoted 5 lines · Faiz Abbas

Now that NAND is supported on DRA71x include various NAND environment settings

Applied to u-boot/master, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190412/ebffb377/attachment.sig>
author
#10 lore raw

v2 cover Add Support for NAND in dra71x-evm

In reply to Faiz Abbas

Hi,

Quoted 14 lines · Faiz Abbas

The following patches add support for NAND and booting from NAND in dra71x-evm.

v2:
Patch4: Moved NANDARGS to its own file in include/environment/ti

Faiz Abbas (2):
configs: dra71x-evm: Add Support for NAND
configs: ti_omap5_common: Add NAND environment settings

Franklin S Cooper Jr (2):
board: ti: dra71: Add pinmux settings for NAND on DRA71x EVM
arm: dra7: Allow NAND to be enabled on DRA71x EVM.

Quoted 10 lines
 board/ti/dra7xx/evm.c             | 56 +++++++++++++++++++++++++++++
 board/ti/dra7xx/mux_data.h        | 60 ++++++++++++++++++++++---------
 configs/dra7xx_evm_defconfig      |  7 +++-
 configs/dra7xx_hs_evm_defconfig   |  7 +++-
 include/configs/dra7xx_evm.h      |  2 +-
 include/configs/ti_omap5_common.h |  3 +-
 include/environment/ti/nand.h     | 26 ++++++++++++++
 7 files changed, 141 insertions(+), 20 deletions(-)
 create mode 100644 include/environment/ti/nand.h

Gentle ping.

Thanks,
Faiz

#11 lore raw

v2 cover Add Support for NAND in dra71x-evm

Quoted 28 lines · Faiz Abbas

Hi,

Quoted 14 lines · Faiz Abbas

The following patches add support for NAND and booting from NAND in dra71x-evm.

v2:
Patch4: Moved NANDARGS to its own file in include/environment/ti

Faiz Abbas (2):
configs: dra71x-evm: Add Support for NAND
configs: ti_omap5_common: Add NAND environment settings

Franklin S Cooper Jr (2):
board: ti: dra71: Add pinmux settings for NAND on DRA71x EVM
arm: dra7: Allow NAND to be enabled on DRA71x EVM.

Quoted 10 lines
 board/ti/dra7xx/evm.c             | 56 +++++++++++++++++++++++++++++
 board/ti/dra7xx/mux_data.h        | 60 ++++++++++++++++++++++---------
 configs/dra7xx_evm_defconfig      |  7 +++-
 configs/dra7xx_hs_evm_defconfig   |  7 +++-
 include/configs/dra7xx_evm.h      |  2 +-
 include/configs/ti_omap5_common.h |  3 +-
 include/environment/ti/nand.h     | 26 ++++++++++++++
 7 files changed, 141 insertions(+), 20 deletions(-)
 create mode 100644 include/environment/ti/nand.h
Quoted 1 line

Gentle ping.

I reviewed 4/4 and the rest is not appropriate for this point in the release cycle, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190313/0448e3fb/attachment.sig>