Add Support for NAND in dra71x-evm
v2 cover Add Support for NAND in dra71x-evm
The following patches add support for NAND and booting from NAND in dra71x-evm.
v2:
Patch4: Moved NANDARGS to its own file in include/environment/ti
Faiz Abbas (2):
configs: dra71x-evm: Add Support for NAND
configs: ti_omap5_common: Add NAND environment settings
Franklin S Cooper Jr (2):
board: ti: dra71: Add pinmux settings for NAND on DRA71x EVM
arm: dra7: Allow NAND to be enabled on DRA71x EVM.
board/ti/dra7xx/evm.c | 56 +++++++++++++++++++++++++++++ board/ti/dra7xx/mux_data.h | 60 ++++++++++++++++++++++--------- configs/dra7xx_evm_defconfig | 7 +++- configs/dra7xx_hs_evm_defconfig | 7 +++- include/configs/dra7xx_evm.h | 2 +- include/configs/ti_omap5_common.h | 3 +- include/environment/ti/nand.h | 26 ++++++++++++++ 7 files changed, 141 insertions(+), 20 deletions(-) create mode 100644 include/environment/ti/nand.h
Signature · 1 line
2.19.2
PATCH v2 1/4 board: ti: dra71: Add pinmux settings for NAND on DRA71x EVM
From: Franklin S Cooper Jr <[email protected]>
By default VOUT3 occupies the pins required for NAND. Therefore, create a seperate entry that can be use to reconfigure these pins to work for NAND.
On the EVM SWITCH 8 pins 0 and 1 will be used to determine if NAND is enabled or not. For NAND to be selected pin 0 should be on and pin 1 should be off. Any other combination will assume NAND shouldn't be enabled.
--- board/ti/dra7xx/mux_data.h | 60 ++++++++++++++++++++++++++++---------- 1 file changed, 44 insertions(+), 16 deletions(-)
board/ti/dra7xx/mux_data.h +44 -16
@@ -220,22 +220,6 @@ const struct pad_conf_entry dra72x_rgmii_padconf_array_revc[] = { };const struct pad_conf_entry dra71x_core_padconf_array[] = { - {GPMC_AD0 , (M3 |PIN_INPUT )},/* gpmc_ad0.vout3_d0 */ - {GPMC_AD1 , (M3 |PIN_INPUT )},/* gpmc_ad1.vout3_d1 */ - {GPMC_AD2 , (M3 |PIN_INPUT )},/* gpmc_ad2.vout3_d2 */ - {GPMC_AD3 , (M3 |PIN_INPUT )},/* gpmc_ad3.vout3_d3 */ - {GPMC_AD4 , (M3 |PIN_INPUT )},/* gpmc_ad4.vout3_d4 */ - {GPMC_AD5 , (M3 |PIN_INPUT )},/* gpmc_ad5.vout3_d5 */ - {GPMC_AD6 , (M3 |PIN_INPUT )},/* gpmc_ad6.vout3_d6 */ - {GPMC_AD7 , (M3 |PIN_INPUT )},/* gpmc_ad7.vout3_d7 */ - {GPMC_AD8 , (M3 |PIN_INPUT )},/* gpmc_ad8.vout3_d8 */ - {GPMC_AD9 , (M3 |PIN_INPUT )},/* gpmc_ad9.vout3_d9 */ - {GPMC_AD10 , (M3 |PIN_INPUT )},/* gpmc_ad10.vout3_d10 */ - {GPMC_AD11 , (M3 |PIN_INPUT )},/* gpmc_ad11.vout3_d11 */ - {GPMC_AD12 , (M3 |PIN_INPUT )},/* gpmc_ad12.vout3_d12 */ - {GPMC_AD13 , (M3 |PIN_INPUT )},/* gpmc_ad13.vout3_d13 */ - {GPMC_AD14 , (M3 |PIN_INPUT )},/* gpmc_ad14.vout3_d14 */ - {GPMC_AD15 , (M3 |PIN_INPUT )},/* gpmc_ad15.vout3_d15 */ {GPMC_A0 , (M3 |PIN_INPUT_PULLDOWN )},/* gpmc_a0.vout3_d16 */ {GPMC_A1 , (M3 |PIN_INPUT_PULLDOWN )},/* gpmc_a1.vout3_d17 */ {GPMC_A2 , (M3 |PIN_INPUT_PULLDOWN )},/* gpmc_a2.vout3_d18 */
@@ -370,6 +354,50 @@ const struct pad_conf_entry dra71x_core_padconf_array[] = { {WAKEUP3, (M1 | PULL_ENA | PULL_UP)}, /* Wakeup3.sys_nirq1 */ }; +const struct pad_conf_entry dra71x_vout3_padconf_array[] = { + {GPMC_AD0 , (M3 |PIN_INPUT )},/* gpmc_ad0.vout3_d0 */ + {GPMC_AD1 , (M3 |PIN_INPUT )},/* gpmc_ad1.vout3_d1 */ + {GPMC_AD2 , (M3 |PIN_INPUT )},/* gpmc_ad2.vout3_d2 */ + {GPMC_AD3 , (M3 |PIN_INPUT )},/* gpmc_ad3.vout3_d3 */ + {GPMC_AD4 , (M3 |PIN_INPUT )},/* gpmc_ad4.vout3_d4 */ + {GPMC_AD5 , (M3 |PIN_INPUT )},/* gpmc_ad5.vout3_d5 */ + {GPMC_AD6 , (M3 |PIN_INPUT )},/* gpmc_ad6.vout3_d6 */ + {GPMC_AD7 , (M3 |PIN_INPUT )},/* gpmc_ad7.vout3_d7 */ + {GPMC_AD8 , (M3 |PIN_INPUT )},/* gpmc_ad8.vout3_d8 */ + {GPMC_AD9 , (M3 |PIN_INPUT )},/* gpmc_ad9.vout3_d9 */ + {GPMC_AD10 , (M3 |PIN_INPUT )},/* gpmc_ad10.vout3_d10 */ + {GPMC_AD11 , (M3 |PIN_INPUT )},/* gpmc_ad11.vout3_d11 */ + {GPMC_AD12 , (M3 |PIN_INPUT )},/* gpmc_ad12.vout3_d12 */ + {GPMC_AD13 , (M3 |PIN_INPUT )},/* gpmc_ad13.vout3_d13 */ + {GPMC_AD14 , (M3 |PIN_INPUT )},/* gpmc_ad14.vout3_d14 */ + {GPMC_AD15 , (M3 |PIN_INPUT )},/* gpmc_ad15.vout3_d15 */ +}; + +const struct pad_conf_entry dra71x_nand_padconf_array[] = { + {GPMC_AD0 , (M0 |PIN_INPUT )},/* gpmc_ad0.gpmc_ad0 */ + {GPMC_AD1 , (M0 |PIN_INPUT )},/* gpmc_ad1.gpmc_ad1 */ + {GPMC_AD2 , (M0 |PIN_INPUT )},/* gpmc_ad2.gpmc_ad2 */ + {GPMC_AD3 , (M0 |PIN_INPUT )},/* gpmc_ad3.gpmc_ad3 */ + {GPMC_AD4 , (M0 |PIN_INPUT )},/* gpmc_ad4.gpmc_ad4 */ + {GPMC_AD5 , (M0 |PIN_INPUT )},/* gpmc_ad5.gpmc_ad5 */ + {GPMC_AD6 , (M0 |PIN_INPUT )},/* gpmc_ad6.gpmc_ad6 */ + {GPMC_AD7 , (M0 |PIN_INPUT )},/* gpmc_ad7.gpmc_ad7 */ + {GPMC_AD8 , (M0 |PIN_INPUT )},/* gpmc_ad8.gpmc_ad8 */ + {GPMC_AD9 , (M0 |PIN_INPUT )},/* gpmc_ad9.gpmc_ad9 */ + {GPMC_AD10 , (M0 |PIN_INPUT )},/* gpmc_ad10.gpmc_ad10 */ + {GPMC_AD11 , (M0 |PIN_INPUT )},/* gpmc_ad11.gpmc_ad11 */ + {GPMC_AD12 , (M0 |PIN_INPUT )},/* gpmc_ad12.gpmc_ad12 */ + {GPMC_AD13 , (M0 |PIN_INPUT )},/* gpmc_ad13.gpmc_ad13 */ + {GPMC_AD14 , (M0 |PIN_INPUT )},/* gpmc_ad14.gpmc_ad14 */ + {GPMC_AD15 , (M0 |PIN_INPUT )},/* gpmc_ad15.gpmc_ad15 */ + {GPMC_CS0 , (M0 |PIN_INPUT_PULLUP )},/* gpmc_cs0.gpmc_cs0 */ + {GPMC_ADVN_ALE , (M0 |PIN_INPUT_PULLDOWN )},/* gpmc_advn_ale.gpmc_advn_ale */ + {GPMC_OEN_REN , (M0 |PIN_INPUT_PULLUP )},/* gpmc_oen_ren.gpmc_oen_ren */ + {GPMC_WEN , (M0 |PIN_INPUT_PULLUP )},/* gpmc_wen.gpmc_wen */ + {GPMC_BEN0 , (M0 |PIN_INPUT_PULLDOWN )},/* gpmc_ben0.gpmc_ben0 */ + {GPMC_WAIT0 , (M0 |PIN_INPUT_PULLUP |SLEWCONTROL )},/* gpmc_wait0.gpmc_wait0 */ +}; +const struct pad_conf_entry early_padconf[] = { {UART1_RXD , (PIN_INPUT_SLEW |M0 )},/* UART1_RXD */ {UART1_TXD, (PIN_INPUT_SLEW | M0)}, /* UART1_TXD */
Signature · 1 line
2.19.2
PATCH v2 1/4 board: ti: dra71: Add pinmux settings for NAND on DRA71x EVM
Quoted 6 lines · Faiz Abbas
From: Franklin S Cooper Jr <[email protected]>
By default VOUT3 occupies the pins required for NAND. Therefore, create a seperate entry that can be use to reconfigure these pins to work for NAND.
Quoted 7 lines
On the EVM SWITCH 8 pins 0 and 1 will be used to determine if NAND is enabled or not. For NAND to be selected pin 0 should be on and pin 1 should be off. Any other combination will assume NAND shouldn't be enabled.
Signed-off-by Franklin S Cooper Jr <[email protected]>Signed-off-by Faiz Abbas <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190412/9f46421c/attachment.sig>
PATCH v2 2/4 arm: dra7: Allow NAND to be enabled on DRA71x EVM.
In reply to Faiz AbbasFrom: Franklin S Cooper Jr <[email protected]>
If SW 8 pins 0 and 1 indicate that NAND should be enabled then the pins pinmux must be reconfigured for NAND mode.
Therefore, enable NAND by reconfiguring the pinmux.
--- board/ti/dra7xx/evm.c | 56 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 56 insertions(+)
board/ti/dra7xx/evm.c +56 -0
@@ -27,6 +27,7 @@#include <environment.h> #include <dwc3-uboot.h> #include <dwc3-omap-uboot.h> +#include <i2c.h> #include <ti-usb-phy-uboot.h> #include <miiphy.h>
@@ -55,6 +56,10 @@ DECLARE_GLOBAL_DATA_PTR;#define SYSINFO_BOARD_NAME_MAX_LEN 37 +/* I2C I/O Expander */ +#define NAND_PCF8575_ADDR 0x21 +#define NAND_PCF8575_I2C_BUS_NUM 0 +const struct omap_sysinfo sysinfo = {"Board: UNKNOWN(DRA7 EVM) REV UNKNOWN\n" };
@@ -777,6 +782,44 @@ void set_muxconf_regs(void) early_padconf, ARRAY_SIZE(early_padconf)); } +#if defined(CONFIG_NAND ) +static int nand_sw_detect (void ) +{ +int rc; +uchar data[2 ]; +struct udevice *dev; + + rc =i2c_get_chip_for_busnum (NAND_PCF8575_I2C_BUS_NUM , +NAND_PCF8575_ADDR ,0 , &dev); +if (rc) +return -1 ; + + rc =dm_i2c_read (dev,0 , (uint8_t *)&data,sizeof (data)); +if (rc) +return -1 ; + +/* We are only interested in P10 and P11 on PCF8575 which is equal to +* bits 8 and 9. +*/ + data[1 ] = data[1 ] &0x3 ; + +/* Ensure only P11 is set and P10 is cleared. This ensures only +* NAND (P10) is configured and not NOR (P11) which are both low +* true signals. NAND and NOR settings should not be enabled at +* the same time. +*/ +if (data[1 ] ==0x2 ) +return 0 ; + +return -1 ; +} +#else +int nand_sw_detect (void ) +{ +return -1 ; +} +#endif +#ifdef CONFIG_IODELAY_RECALIBRATION void recalibrate_iodelay (void ) {
@@ -796,6 +839,19 @@ void recalibrate_iodelay(void) npads =ARRAY_SIZE (dra71x_core_padconf_array); iodelay = dra71_iodelay_cfg_array; niodelays =ARRAY_SIZE (dra71_iodelay_cfg_array); +/* If SW8 on the EVM is set to enable NAND then +* overwrite the pins used by VOUT3 with NAND. +*/ +if (!nand_sw_detect ()) { + delta_pads = dra71x_nand_padconf_array; + delta_npads = +ARRAY_SIZE (dra71x_nand_padconf_array); + }else { + delta_pads = dra71x_vout3_padconf_array; + delta_npads = +ARRAY_SIZE (dra71x_vout3_padconf_array); + } + }else if (board_is_dra72x_revc_or_later ()) { delta_pads = dra72x_rgmii_padconf_array_revc; delta_npads =
Signature · 1 line
2.19.2
PATCH v2 2/4 arm: dra7: Allow NAND to be enabled on DRA71x EVM.
Quoted 9 lines · Faiz Abbas
From: Franklin S Cooper Jr <[email protected]>
If SW 8 pins 0 and 1 indicate that NAND should be enabled then the pins pinmux must be reconfigured for NAND mode.
Therefore, enable NAND by reconfiguring the pinmux.
Signed-off-by Franklin S Cooper Jr <[email protected]>Signed-off-by Faiz Abbas <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190412/a5933c76/attachment.sig>
PATCH v2 3/4 configs: dra71x-evm: Add Support for NAND
In reply to Faiz AbbasAdd NAND support to dra71x-evm defconfig
--- configs/dra7xx_evm_defconfig | 3 +++ configs/dra7xx_hs_evm_defconfig | 3 +++ 2 files changed, 6 insertions(+)
configs/dra7xx_evm_defconfig +3 -0
@@ -28,6 +28,7 @@ CONFIG_SPL_OS_BOOT=y CONFIG_SPL_SPI_LOAD=y CONFIG_CMD_SPL=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_NAND=y # CONFIG_CMD_SETEXPR is not set CONFIG_OF_CONTROL=y CONFIG_SPL_OF_CONTROL=y
@@ -66,6 +67,8 @@ CONFIG_MMC_UHS_SUPPORT=y CONFIG_MMC_HS200_SUPPORT=y CONFIG_SPL_MMC_HS200_SUPPORT=y CONFIG_MMC_OMAP_HS=y +CONFIG_NAND=y +CONFIG_SYS_NAND_BUSWIDTH_16BIT=y CONFIG_DM_SPI_FLASH=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y
configs/dra7xx_hs_evm_defconfig +3 -0
@@ -32,6 +32,7 @@ CONFIG_SPL_DMA_SUPPORT=y # CONFIG_SPL_NAND_SUPPORT is not set CONFIG_SPL_SPI_LOAD=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_NAND=y # CONFIG_CMD_SETEXPR is not set CONFIG_OF_CONTROL=y CONFIG_SPL_OF_CONTROL=y
@@ -70,6 +71,8 @@ CONFIG_MMC_UHS_SUPPORT=y CONFIG_MMC_HS200_SUPPORT=y CONFIG_SPL_MMC_HS200_SUPPORT=y CONFIG_MMC_OMAP_HS=y +CONFIG_NAND=y +CONFIG_SYS_NAND_BUSWIDTH_16BIT=y CONFIG_DM_SPI_FLASH=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y
Signature · 1 line
2.19.2
PATCH v2 3/4 configs: dra71x-evm: Add Support for NAND
Quoted 3 lines · Faiz Abbas
Add NAND support to dra71x-evm defconfig
Signed-off-by Faiz Abbas <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190412/219aa75b/attachment.sig>
PATCH v2 4/4 configs: ti_omap5_common: Add NAND environment settings
In reply to Faiz AbbasNow that NAND is supported on DRA71x include various NAND environment settings
--- configs/dra7xx_evm_defconfig | 4 +++- configs/dra7xx_hs_evm_defconfig | 4 +++- include/configs/dra7xx_evm.h | 2 +- include/configs/ti_omap5_common.h | 3 ++- include/environment/ti/nand.h | 26 ++++++++++++++++++++++++++ 5 files changed, 35 insertions(+), 4 deletions(-) create mode 100644 include/environment/ti/nand.h
configs/dra7xx_evm_defconfig +3 -1
@@ -23,13 +23,15 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_SEPARATE_BSS=y CONFIG_SPL_DMA_SUPPORT=y -# CONFIG_SPL_NAND_SUPPORT is not set CONFIG_SPL_OS_BOOT=y CONFIG_SPL_SPI_LOAD=y CONFIG_CMD_SPL=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_NAND=y # CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_MTDPARTS=y +CONFIG_MTDIDS_DEFAULT="nand0=nand.0" +CONFIG_MTDPARTS_DEFAULT="mtdparts=nand.0:256k(NAND.SPL),256k(NAND.SPL.backup1),256k(NAND.SPL.backup2),256k(NAND.SPL.backup3),256k(NAND.u-boot-spl-os),2m(NAND.u-boot),128k(NAND.u-boot-env),128k(NAND.u-boot-env.backup1),8m(NAND.kernel),-(NAND.file-system)" CONFIG_OF_CONTROL=y CONFIG_SPL_OF_CONTROL=y CONFIG_DEFAULT_DEVICE_TREE="dra7-evm"
configs/dra7xx_hs_evm_defconfig +3 -1
@@ -33,7 +33,9 @@ CONFIG_SPL_DMA_SUPPORT=y CONFIG_SPL_SPI_LOAD=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_NAND=y -# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_MTDPARTS=y +CONFIG_MTDIDS_DEFAULT="nand0=nand.0" +CONFIG_MTDPARTS_DEFAULT="mtdparts=nand.0:256k(NAND.SPL),256k(NAND.SPL.backup1),256k(NAND.SPL.backup2),256k(NAND.SPL.backup3),256k(NAND.u-boot-spl-os),2m(NAND.u-boot),128k(NAND.u-boot-env),128k(NAND.u-boot-env.backup1),8m(NAND.kernel),-(NAND.file-system)" CONFIG_OF_CONTROL=y CONFIG_SPL_OF_CONTROL=y CONFIG_DEFAULT_DEVICE_TREE="dra7-evm"
include/configs/dra7xx_evm.h +1 -1
@@ -136,7 +136,7 @@ 50, 51, 52, 53, 54, 55, 56, 57, }#define CONFIG_SYS_NAND_ECCSIZE 512#define CONFIG_SYS_NAND_ECCBYTES 14 -#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x000c0000 +#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x00140000/* NAND: SPL related configs */ /* NAND: SPL falcon mode configs */ #ifdef CONFIG_SPL_OS_BOOT
include/configs/ti_omap5_common.h +2 -1
@@ -56,6 +56,7 @@#include <environment/ti/boot.h> #include <environment/ti/mmc.h> +#include <environment/ti/nand.h> #define CONFIG_EXTRA_ENV_SETTINGS \ DEFAULT_LINUX_BOOT_ENV \
@@ -65,6 +66,7 @@DEFAULT_FDT_TI_ARGS \ DFUARGS \NETARGS \ +NANDARGS \/* * SPL related defines. The Public RAM memory map the ROM defines the
@@ -100,7 +102,6 @@#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \ (128 << 20)) -#ifdef CONFIG_SPL_BUILD #undef CONFIG_TIMER#endif
include/environment/ti/nand.h new file +26 -0
@@ -0,0 +1,26 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* +* Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com +* +* Environment variable definitions for NAND on TI boards. +*/ + +#ifdef CONFIG_NAND +#define NANDARGS \ + "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \ + "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ + "nandargs=setenv bootargs console=${console} " \ + "${optargs} " \ + "root=${nandroot} " \ + "rootfstype=${nandrootfstype}\0" \ + "nandroot=ubi0:rootfs rw ubi.mtd=NAND.file-system,2048\0" \ + "nandrootfstype=ubifs rootwait=1\0" \ + "nandboot=echo Booting from nand ...; " \ + "run nandargs; " \ + "nand read ${fdtaddr} NAND.u-boot-spl-os; " \ + "nand read ${loadaddr} NAND.kernel; " \ + "bootz ${loadaddr} - ${fdtaddr}\0" +#else +#define NANDARGS "" +#endif +
Signature · 1 line
2.19.2
PATCH v2 4/4 configs: ti_omap5_common: Add NAND environment settings
Quoted 4 lines · Faiz Abbas
Now that NAND is supported on DRA71x include various NAND environment settings
Signed-off-by Faiz Abbas <[email protected]>
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190227/cec3245c/attachment.sig>
PATCH v2 4/4 configs: ti_omap5_common: Add NAND environment settings
In reply to Faiz AbbasQuoted 5 lines · Faiz Abbas
Now that NAND is supported on DRA71x include various NAND environment settings
Signed-off-by Faiz Abbas <[email protected]>Reviewed-by Tom Rini <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190412/ebffb377/attachment.sig>
v2 cover Add Support for NAND in dra71x-evm
In reply to Faiz AbbasHi,
Quoted 14 lines · Faiz Abbas
The following patches add support for NAND and booting from NAND in dra71x-evm.
v2:
Patch4: Moved NANDARGS to its own file ininclude/environment/tiFaiz Abbas (2):
configs: dra71x-evm: Add Support for NAND
configs:ti_omap5_common: Add NAND environment settingsFranklin S Cooper Jr (2):
board: ti: dra71: Add pinmux settings for NAND on DRA71x EVM
arm: dra7: Allow NAND to be enabled on DRA71x EVM.
Quoted 10 lines
board/ti/dra7xx/evm.c | 56 +++++++++++++++++++++++++++++ board/ti/dra7xx/mux_data.h | 60 ++++++++++++++++++++++--------- configs/dra7xx_evm_defconfig | 7 +++- configs/dra7xx_hs_evm_defconfig | 7 +++- include/configs/dra7xx_evm.h | 2 +- include/configs/ti_omap5_common.h | 3 +- include/environment/ti/nand.h | 26 ++++++++++++++ 7 files changed, 141 insertions(+), 20 deletions(-) create mode 100644 include/environment/ti/nand.h
Gentle ping.
Thanks,
Faiz
v2 cover Add Support for NAND in dra71x-evm
Quoted 28 lines · Faiz Abbas
Hi,
Quoted 14 lines · Faiz Abbas
The following patches add support for NAND and booting from NAND in dra71x-evm.
v2:
Patch4: Moved NANDARGS to its own file ininclude/environment/tiFaiz Abbas (2):
configs: dra71x-evm: Add Support for NAND
configs:ti_omap5_common: Add NAND environment settingsFranklin S Cooper Jr (2):
board: ti: dra71: Add pinmux settings for NAND on DRA71x EVM
arm: dra7: Allow NAND to be enabled on DRA71x EVM.Quoted 10 lines
board/ti/dra7xx/evm.c | 56 +++++++++++++++++++++++++++++ board/ti/dra7xx/mux_data.h | 60 ++++++++++++++++++++++--------- configs/dra7xx_evm_defconfig | 7 +++- configs/dra7xx_hs_evm_defconfig | 7 +++- include/configs/dra7xx_evm.h | 2 +- include/configs/ti_omap5_common.h | 3 +- include/environment/ti/nand.h | 26 ++++++++++++++ 7 files changed, 141 insertions(+), 20 deletions(-) create mode 100644 include/environment/ti/nand.h
Quoted 1 line
Gentle ping.
I reviewed 4/4 and the rest is not appropriate for this point in the release cycle, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190313/0448e3fb/attachment.sig>