ARM: sun8i: h3: bluetooth for Banana Pi M2 Zero board
Subsystems (2)
PATCH v2 1/1 ARM: sun8i: h3: bluetooth for Banana Pi M2 Zero board
The Banana Pi M2 Zero board has an AP6212 BT+Wifi combo chip with broadcom internals attached to UART1 and some gpios. This addition is in line with similar boards
---
changes in v2: remove pinctrl things
arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts | 15 +++++++++++++++ 1 file changed, 15 insertions(+)
arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts +15 -0
@@ -69,6 +69,8 @@ compatible = "mmc-pwrseq-simple"; pinctrl-names = "default"; reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ + clocks = <&rtc 1>; + clock-names = "ext_clock"; }; };
@@ -122,7 +124,20 @@ &uart1 { pinctrl-names = "default"; pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; + uart-has-rtscts; status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&rtc 1>; + clock-names = "lpo"; + vbat-supply = <®_vcc3v3>; + vddio-supply = <®_vcc3v3>; + device-wakeup-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */ + host-wakeup-gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */ + shutdown-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ + }; + }; &usb_otg {
Signature · 1 line
2.11.0
ping
Quoted 48 lines · On Fri, 1 Mar 2019 19:52:12 +0100 Andreas Kemnade <[email protected]> wrote:
The Banana Pi M2 Zero board has an AP6212 BT+Wifi combo chip with broadcom internals attached to UART1 and some gpios. This addition is in line with similar boards
Signed-off-by Andreas Kemnade <[email protected]>---
changes in v2: remove pinctrl thingsarch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts | 15 +++++++++++++++ 1 file changed, 15 insertions(+)arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts +15
-0@@ -69,6 +69,8 @@ compatible = "mmc-pwrseq-simple"; pinctrl-names = "default"; reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ + clocks = <&rtc 1>; + clock-names = "ext_clock"; }; };@@ -122,7 +124,20 @@ &uart1 { pinctrl-names = "default"; pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; + uart-has-rtscts; status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&rtc 1>; + clock-names = "lpo"; + vbat-supply = <®_vcc3v3>; + vddio-supply = <®_vcc3v3>; + device-wakeup-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */ + host-wakeup-gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */ + shutdown-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ + }; + }; &usb_otg {Signature · 1 line
2.11.0
Quoted 10 lines · Andreas Kemnade
ping
Quoted 5 lines · On Fri, 1 Mar 2019 19:52:12 +0100 Andreas Kemnade <[email protected]> wrote:
The Banana Pi M2 Zero board has an AP6212 BT+Wifi combo chip with broadcom internals attached to UART1 and some gpios. This addition is in line with similar boards
Signed-off-by Andreas Kemnade <[email protected]>
I never received that patch, who did you send it to?
Maxime
--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
Hi,
Quoted 6 lines · On Mon, 8 Apr 2019 10:14:04 +0200 Maxime Ripard <[email protected]>…
Quoted 5 lines · Andreas Kemnade
ping
On Fri, 1 Mar 2019 19:52:12 +0100
Andreas Kemnade <[email protected]> wrote:
Quoted 8 lines
Quoted 5 lines
Quoted 5 lines
The Banana Pi M2 Zero board has an AP6212 BT+Wifi combo chip with broadcom internals attached to UART1 and some gpios. This addition is in line with similar boards
Signed-off-by Andreas Kemnade <[email protected]>I never received that patch, who did you send it to?
Seems that I only have sent you the first version of that patch. Somehow I must have left you out during copy and paste of adresses.
Regards,
Andreas
Quoted 3 lines · Andreas Kemnade
The Banana Pi M2 Zero board has an AP6212 BT+Wifi combo chip with broadcom internals attached to UART1 and some gpios.
^ Broadcom
Quoted 1 line
This addition is in line with similar boards
This sentence is unfinished.
Quoted 2 lines
Signed-off-by Andreas Kemnade <[email protected]>
ChenYu