qemu-binfmt-conf.sh
v4 cover qemu-binfmt-conf.sh
Hi,
This series reworks qemu-binfmt-conf.sh:
* Argument <CPU> from option '--systemd' is generalized to <TARGETS>, and it is accepted for any mode (default, debian or systemd). It can be a single target arch or a list of them.
* Option '--clear' is added, which allows to remove an already registered target interpreter or a list of them. The implementation is functional but partial. Please, see the corresponding commit.
* Option '--test|--dry-run' is added, which allows to execute the CHECK according to the provided arguments, but no interpreter is configured.
* Support to set options through environment variables: QEMU_TARGETS, QEMU_PATH, QEMU_SUFFIX, QEMU_PERSISTENT, QEMU_CREDENTIAL, QEMU_CLEAR and QEMU_TEST.
The following changes are not backward compatible:
* Option '--persistent' no longer requires/accepts an argument.
* Option '--credential' no longer requires/accepts an argument.
* Option '--systemd' no longer requires/accepts an argument.
* Option '--qemu-path' is renamed to '--path'.
* Option '--qemu-suffix' is renamed to '--suffix'.
The functionality of all of them is untouched. Changes are related to syntax only.
The main differences compared to v3 are:
* Suggestions by Laurent Vivier regarding syntax and usage of redundant variables are addressed.
* The same presentation format as for qemu-XXXX ("Argument Env-variable Description") is used and defaults for envvars are shown.
* '--reset' (now '--clear') is exclusive, i.e., the list of positional arguments is used, and no registration function is executed.
* Commas are no longer accepted as separators for TARGETS.
* The order of some patches is reorganized and some are squashed:
* v4 4/10 is new
* v3 4/10 -> v4 5/10
* v3 5/10 -> v4 6/10
* v3 6/10 and 10/10 --> v4 7/10
* v3 7/10 -> v4 8/10
* v3 8/10 and v3 9/10 --> v4 9/10
* v4 10/10 is new
Based on:
* [PATCH v3 0/10] qemu-binfmt-conf.sh
* [PATCH v2] qemu-binfmt-conf.sh: add CPUS, add --reset, make -p and -c boolean (no arg)
* [PATCH] qemu-binfmt-conf.sh: add CPUS, add --reset, make -p and -c boolean (no arg)
Regards
Unai Martinez-Corral (10):
qemu-binfmt-conf.sh: enforce safe style consistency qemu-binfmt-conf.sh: make opts -p and -c boolean qemu-binfmt-conf.sh: add QEMU_CREDENTIAL and QEMU_PERSISTENT qemu-binfmt-conf.sh: use the same presentation format as for qemu-* qemu-binfmt-conf.sh: remove 'qemu' prefix from cli options qemu-binfmt-conf.sh: honour QEMU_PATH and/or QEMU_SUFFIX qemu-binfmt-conf.sh: generalize <CPU> to positional [TARGETS] qemu-binfmt-conf.sh: add option --clear qemu-binfmt-conf.sh: update usage() qemu-binfmt-conf.sh: add --test|--dry-run
scripts/qemu-binfmt-conf.sh | 215
1 file changed, 78 insertions(+), 137 deletions(-)
PATCH v4 1/10 qemu-binfmt-conf.sh: enforce safe style consistency
Spaces are added before '; then', for consistency.
All the tests are prefixed with 'x', in order to avoid risky comparisons (i.e. a user deliberately trying to provoke a syntax error).
--- scripts/qemu-binfmt-conf.sh | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-)
scripts/qemu-binfmt-conf.sh +7 -7
@@ -219,12 +219,12 @@ qemu_check_access() { qemu_check_bintfmt_misc() { # load the binfmt_misc module - if [ ! -d /proc/sys/fs/binfmt_misc ]; then + if [ ! -d /proc/sys/fs/binfmt_misc ] ; then if ! /sbin/modprobe binfmt_misc ; then exit 1 fi fi - if [ ! -f /proc/sys/fs/binfmt_misc/register ]; then + if [ ! -f /proc/sys/fs/binfmt_misc/register ] ; then if ! mount binfmt_misc -t binfmt_misc /proc/sys/fs/binfmt_misc ; then exit 1 fi
@@ -255,10 +255,10 @@ qemu_check_systemd() { qemu_generate_register() { flags="" - if [ "$CREDENTIAL" = "yes" ] ; then + if [ "x$CREDENTIAL" = "xyes" ] ; then flags="OC" fi - if [ "$PERSISTENT" = "yes" ] ; then + if [ "x$PERSISTENT" = "xyes" ] ; then flags="${flags}F" fi
@@ -296,18 +296,18 @@ qemu_set_binfmts() { mask=$(eval echo \$${cpu}_mask) family=$(eval echo \$${cpu}_family) - if [ "$magic" = "" ] || [ "$mask" = "" ] || [ "$family" = "" ] ; then + if [ "x$magic" = "x" ] || [ "x$mask" = "x" ] || [ "x$family" = "x" ] ; then echo "INTERNAL ERROR: unknown cpu $cpu" 1>&2 continue fi qemu="$QEMU_PATH/qemu-$cpu" - if [ "$cpu" = "i486" ] ; then + if [ "x$cpu" = "xi486" ] ; then qemu="$QEMU_PATH/qemu-i386" fi qemu="$qemu$QEMU_SUFFIX" - if [ "$host_family" != "$family" ] ; then + if [ "x$host_family" != "x$family" ] ; then $BINFMT_SET fi done
--
2.21.0
PATCH v4 2/10 qemu-binfmt-conf.sh: make opts -p and -c boolean
In reply to Unai Martinez-CorralThis patch breaks backward compatibility.
Both '--persistent' and '--credential' default to 'no'. Hence, '-p no' or '-c no' are reduntant. Overall, accepting an argument might be misleading because options are, indeed, boolean. This patch makes both options boolean in getopt, so if any of them is provided the corresponding variable is set to true.
--- scripts/qemu-binfmt-conf.sh | 16 +++++++--------- 1 file changed, 7 insertions(+), 9 deletions(-)
scripts/qemu-binfmt-conf.sh +7 -9
@@ -168,8 +168,8 @@ qemu_get_family() { usage() { cat <<EOF Usage: qemu-binfmt-conf.sh [--qemu-path PATH][--debian][--systemd CPU] - [--help][--credential yes|no][--exportdir PATH] - [--persistent yes|no][--qemu-suffix SUFFIX] + [--help][--credential][--exportdir PATH] + [--persistent][--qemu-suffix SUFFIX] Configure binfmt_misc to use qemu interpreter
@@ -184,9 +184,9 @@ Usage: qemu-binfmt-conf.sh [--qemu-path PATH][--debian][--systemd CPU] file for all known cpus --exportdir: define where to write configuration files (default: $SYSTEMDDIR or $DEBIANDIR) - --credential: if yes, credential and security tokens are + --credential: if present, credential and security tokens are calculated according to the binary to interpret - --persistent: if yes, the interpreter is loaded when binfmt is + --persistent: if present, the interpreter is loaded when binfmt is configured and remains in memory. All future uses are cloned from the open file.
@@ -324,7 +324,7 @@ CREDENTIAL=no PERSISTENT=no QEMU_SUFFIX="" -options=$(getopt -o ds:Q:S:e:hc:p: -l debian,systemd:,qemu-path:,qemu-suffix:,exportdir:,help,credential:,persistent: -- "$@") +options=$(getopt -o ds:Q:S:e:hcp -l debian,systemd:,qemu-path:,qemu-suffix:,exportdir:,help,credential,persistent -- "$@") eval set -- "$options" while true ; do
@@ -373,12 +373,10 @@ while true ; do exit 1 ;; -c|--credential) - shift - CREDENTIAL="$1" + CREDENTIAL="yes" ;; -p|--persistent) - shift - PERSISTENT="$1" + PERSISTENT="yes" ;; *) break
--
2.21.0
PATCH v4 3/10 qemu-binfmt-conf.sh: add QEMU_CREDENTIAL and QEMU_PERSISTENT
In reply to Unai Martinez-CorralAllow to set options '--persistent' and/or '--credential' through environment variables. If not defined, defaults are used ('no'). Anyway, command-line arguments have priority over environment variables.
--- scripts/qemu-binfmt-conf.sh | 18 +++++++++++------- 1 file changed, 11 insertions(+), 7 deletions(-)
scripts/qemu-binfmt-conf.sh +11 -7
@@ -186,9 +186,11 @@ Usage: qemu-binfmt-conf.sh [--qemu-path PATH][--debian][--systemd CPU] (default: $SYSTEMDDIR or $DEBIANDIR) --credential: if present, credential and security tokens are calculated according to the binary to interpret + ($QEMU_CREDENTIAL=yes) --persistent: if present, the interpreter is loaded when binfmt is configured and remains in memory. All future uses are cloned from the open file. + ($QEMU_PERSISTENT=yes) To import templates with update-binfmts, use :
@@ -255,10 +257,10 @@ qemu_check_systemd() { qemu_generate_register() { flags="" - if [ "x$CREDENTIAL" = "xyes" ] ; then + if [ "x$QEMU_CREDENTIAL" = "xyes" ] ; then flags="OC" fi - if [ "x$PERSISTENT" = "xyes" ] ; then + if [ "x$QEMU_PERSISTENT" = "xyes" ] ; then flags="${flags}F" fi
@@ -281,7 +283,7 @@ package qemu-$cpu interpreter $qemu magic $magic mask $mask -credential $CREDENTIAL +credential $QEMU_CREDENTIAL EOF }
@@ -320,8 +322,10 @@ SYSTEMDDIR="/etc/binfmt.d" DEBIANDIR="/usr/share/binfmts" QEMU_PATH=/usr/local/bin -CREDENTIAL=no -PERSISTENT=no + +QEMU_CREDENTIAL="${QEMU_CREDENTIAL:-no}" +QEMU_PERSISTENT="${QEMU_PERSISTENT:-no}" + QEMU_SUFFIX="" options=$(getopt -o ds:Q:S:e:hcp -l debian,systemd:,qemu-path:,qemu-suffix:,exportdir:,help,credential,persistent -- "$@")
@@ -373,10 +377,10 @@ while true ; do exit 1 ;; -c|--credential) - CREDENTIAL="yes" + QEMU_CREDENTIAL="yes" ;; -p|--persistent) - PERSISTENT="yes" + QEMU_PERSISTENT="yes" ;; *) break
--
2.21.0
Re: [Qemu-devel] [PATCH v4 3/10] qemu-binfmt-conf.sh: add QEMU_CREDENTIAL and QEMU_PERSISTENT
Quoted 74 lines · Unai Martinez-Corral
Allow to set options '--persistent' and/or '--credential' through environment variables. If not defined, defaults are used ('no'). Anyway, command-line arguments have priority over environment variables.
Signed-off-by Unai Martinez-Corral <[email protected]>--- scripts/qemu-binfmt-conf.sh | 18 +++++++++++------- 1 file changed, 11 insertions(+), 7 deletions(-)scripts/qemu-binfmt-conf.sh +11
-8@@ -186,9 +186,11 @@ Usage: qemu-binfmt-conf.sh [--qemu-path PATH][--debian][--systemd CPU] (default: $SYSTEMDDIR or $DEBIANDIR) --credential: if present, credential and security tokens are calculated according to the binary to interpret + ($QEMU_CREDENTIAL=yes) --persistent: if present, the interpreter is loaded when binfmt is configured and remains in memory. All future uses are cloned from the open file. + ($QEMU_PERSISTENT=yes) To import templates with update-binfmts, use :@@ -255,10 +257,10 @@ qemu_check_systemd() { qemu_generate_register() { flags="" - if [ "x$CREDENTIAL" = "xyes" ] ; then + if [ "x$QEMU_CREDENTIAL" = "xyes" ] ; then flags="OC" fi - if [ "x$PERSISTENT" = "xyes" ] ; then + if [ "x$QEMU_PERSISTENT" = "xyes" ] ; then flags="${flags}F" fi@@ -281,7 +283,7 @@ package qemu-$cpu interpreter $qemu magic $magic mask $mask -credential $CREDENTIAL +credential $QEMU_CREDENTIAL EOF }@@ -320,8 +322,10 @@ SYSTEMDDIR="/etc/binfmt.d" DEBIANDIR="/usr/share/binfmts" QEMU_PATH=/usr/local/bin -CREDENTIAL=no -PERSISTENT=no + +QEMU_CREDENTIAL="${QEMU_CREDENTIAL:-no}" +QEMU_PERSISTENT="${QEMU_PERSISTENT:-no}" + QEMU_SUFFIX="" options=$(getopt -o ds:Q:S:e:hcp -l debian,systemd:,qemu-path:,qemu-suffix:,exportdir:,help,credential,persistent -- "$@")@@ -373,10 +377,10 @@ while true ; do exit 1 ;; -c|--credential) - CREDENTIAL="yes" + QEMU_CREDENTIAL="yes" ;; -p|--persistent) - PERSISTENT="yes" + QEMU_PERSISTENT="yes" ;; *) break --
Quoted 2 lines
2.21.0
PATCH v4 4/10 qemu-binfmt-conf.sh: use the same presentation format as for qemu-*
In reply to Unai Martinez-Corral--- scripts/qemu-binfmt-conf.sh | 58 +++++++++++++++++-------------------- 1 file changed, 27 insertions(+), 31 deletions(-)
scripts/qemu-binfmt-conf.sh +27 -31
@@ -167,47 +167,43 @@ qemu_get_family() { usage() { cat <<EOF -Usage: qemu-binfmt-conf.sh [--qemu-path PATH][--debian][--systemd CPU] - [--help][--credential][--exportdir PATH] - [--persistent][--qemu-suffix SUFFIX] +Usage: qemu-binfmt-conf.sh [options] - Configure binfmt_misc to use qemu interpreter +Configure binfmt_misc to use qemu interpreter - --help: display this usage - --qemu-path: set path to qemu interpreter ($QEMU_PATH) - --qemu-suffix: add a suffix to the default interpreter name - --debian: don't write into /proc, - instead generate update-binfmts templates - --systemd: don't write into /proc, - instead generate file for systemd-binfmt.service - for the given CPU. If CPU is "ALL", generate a - file for all known cpus - --exportdir: define where to write configuration files - (default: $SYSTEMDDIR or $DEBIANDIR) - --credential: if present, credential and security tokens are - calculated according to the binary to interpret - ($QEMU_CREDENTIAL=yes) - --persistent: if present, the interpreter is loaded when binfmt is - configured and remains in memory. All future uses - are cloned from the open file. - ($QEMU_PERSISTENT=yes) +Options and associated environment variables: - To import templates with update-binfmts, use : +Argument Env-variable Description +-h|--help display this usage +-Q|--qemu-path PATH: QEMU_PATH set path to qemu interpreter +-F|--qemu-suffix SUFFIX: add a suffix to the default interpreter name +-d|--debian: don't write into /proc, generate update-binfmts templates +-s|--systemd CPU: don't write into /proc, generate file for + systemd-binfmt.service for the given CPU; if CPU is "ALL", + generate a file for all known cpus. +-e|--exportdir PATH: DEBIANDIR define where to write configuration files + SYSTEMDDIR +-c|--credential: QEMU_CREDENTIAL (yes) credential and security tokens are calculated according + to the binary to interpret +-p|--persistent: QEMU_PERSISTENT (yes) load the interpreter and keep it in memory; all future + uses are cloned from the open file. - sudo update-binfmts --importdir ${EXPORTDIR:-$DEBIANDIR} --import qemu-CPU +To import templates with update-binfmts, use : - To remove interpreter, use : + sudo update-binfmts --importdir ${EXPORTDIR:-$DEBIANDIR} --import qemu-CPU - sudo update-binfmts --package qemu-CPU --remove qemu-CPU $QEMU_PATH +To remove interpreter, use : - With systemd, binfmt files are loaded by systemd-binfmt.service + sudo update-binfmts --package qemu-CPU --remove qemu-CPU $QEMU_PATH - The environment variable HOST_ARCH allows to override 'uname' to generate - configuration files for a different architecture than the current one. +With systemd, binfmt files are loaded by systemd-binfmt.service - where CPU is one of: +The environment variable HOST_ARCH allows to override 'uname' to generate configuration files for a +different architecture than the current one. - $qemu_target_list +where CPU is one of: + + $qemu_target_list EOF }
--
2.21.0
Re: [Qemu-devel] [PATCH v4 4/10] qemu-binfmt-conf.sh: use the same presentation format as for qemu-*
Quoted 36 lines · Unai Martinez-Corral
Signed-off-by Unai Martinez-Corral <[email protected]>--- scripts/qemu-binfmt-conf.sh | 58 +++++++++++++++++-------------------- 1 file changed, 27 insertions(+), 31 deletions(-)scripts/qemu-binfmt-conf.sh +2
-18@@ -167,47 +167,43 @@ qemu_get_family() { usage() { cat <<EOF -Usage: qemu-binfmt-conf.sh [--qemu-path PATH][--debian][--systemd CPU] - [--help][--credential][--exportdir PATH] - [--persistent][--qemu-suffix SUFFIX] +Usage: qemu-binfmt-conf.sh [options] - Configure binfmt_misc to use qemu interpreter +Configure binfmt_misc to use qemu interpreter - --help: display this usage - --qemu-path: set path to qemu interpreter ($QEMU_PATH) - --qemu-suffix: add a suffix to the default interpreter name - --debian: don't write into /proc, - instead generate update-binfmts templates - --systemd: don't write into /proc, - instead generate file for systemd-binfmt.service - for the given CPU. If CPU is "ALL", generate a - file for all known cpus - --exportdir: define where to write configuration files - (default: $SYSTEMDDIR or $DEBIANDIR) - --credential: if present, credential and security tokens are - calculated according to the binary to interpret - ($QEMU_CREDENTIAL=yes)
scripts/qemu-binfmt-conf.sh qemu_get_family() { · line 178
Quoted 10 lines
scripts/qemu-binfmt-conf.sh +4
-5- --persistent: if present, the interpreter is loaded when binfmt is - configured and remains in memory. All future uses - are cloned from the open file. - ($QEMU_PERSISTENT=yes) +Options and associated environment variables: - To import templates with update-binfmts, use : +Argument Env-variable Description +-h|--help display this usage +-Q|--qemu-path PATH: QEMU_PATH set path to qemu interpreter
Please, remove all the ':' above and below.
You should merge PATCH 9/10 with this one.
Thanks,
Laurent
PATCH v4 5/10 qemu-binfmt-conf.sh: remove 'qemu' prefix from cli options
In reply to Unai Martinez-CorralThis breaks backward compatibility.
Options 'qemu-path' and 'qemu-suffix' have the 'qemu-' prefix, which is not present in other option names ('debian', 'systemd', 'persistent', 'credential'...). In order to keep consistency, the prefix is removed.
--- scripts/qemu-binfmt-conf.sh | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-)
scripts/qemu-binfmt-conf.sh +6 -5
@@ -167,6 +167,7 @@ qemu_get_family() { usage() { cat <<EOF + Usage: qemu-binfmt-conf.sh [options] Configure binfmt_misc to use qemu interpreter
@@ -175,8 +176,8 @@ Options and associated environment variables: Argument Env-variable Description -h|--help display this usage --Q|--qemu-path PATH: QEMU_PATH set path to qemu interpreter --F|--qemu-suffix SUFFIX: add a suffix to the default interpreter name +-Q|--path PATH: QEMU_PATH set path to qemu interpreter(s) +-F|--suffix SUFFIX: add a suffix to the default interpreter name -d|--debian: don't write into /proc, generate update-binfmts templates -s|--systemd CPU: don't write into /proc, generate file for systemd-binfmt.service for the given CPU; if CPU is "ALL",
@@ -324,7 +325,7 @@ QEMU_PERSISTENT="${QEMU_PERSISTENT:-no}" QEMU_SUFFIX="" -options=$(getopt -o ds:Q:S:e:hcp -l debian,systemd:,qemu-path:,qemu-suffix:,exportdir:,help,credential,persistent -- "$@") +options=$(getopt -o ds:Q:S:e:hcp -l debian,systemd:,path:,suffix:,exportdir:,help,credential,persistent -- "$@") eval set -- "$options" while true ; do
@@ -356,11 +357,11 @@ while true ; do fi fi ;; - -Q|--qemu-path) + -Q|--path) shift QEMU_PATH="$1" ;; - -F|--qemu-suffix) + -F|--suffix) shift QEMU_SUFFIX="$1" ;;
--
2.21.0
PATCH v4 6/10 qemu-binfmt-conf.sh: honour QEMU_PATH and/or QEMU_SUFFIX
In reply to Unai Martinez-CorralAllow to set 'path' or 'suffix' through environment variables, consistently with 'persistent' and 'credential'.
--- scripts/qemu-binfmt-conf.sh | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-)
scripts/qemu-binfmt-conf.sh +3 -5
@@ -177,7 +177,7 @@ Options and associated environment variables: Argument Env-variable Description -h|--help display this usage -Q|--path PATH: QEMU_PATH set path to qemu interpreter(s) --F|--suffix SUFFIX: add a suffix to the default interpreter name +-F|--suffix SUFFIX: QEMU_SUFFIX add a suffix to the default interpreter name -d|--debian: don't write into /proc, generate update-binfmts templates -s|--systemd CPU: don't write into /proc, generate file for systemd-binfmt.service for the given CPU; if CPU is "ALL",
@@ -318,13 +318,11 @@ BINFMT_SET=qemu_register_interpreter SYSTEMDDIR="/etc/binfmt.d" DEBIANDIR="/usr/share/binfmts" -QEMU_PATH=/usr/local/bin - +QEMU_PATH="${QEMU_PATH:-/usr/local/bin}" +QEMU_SUFFIX="${QEMU_SUFFIX:-}" QEMU_CREDENTIAL="${QEMU_CREDENTIAL:-no}" QEMU_PERSISTENT="${QEMU_PERSISTENT:-no}" -QEMU_SUFFIX="" - options=$(getopt -o ds:Q:S:e:hcp -l debian,systemd:,path:,suffix:,exportdir:,help,credential,persistent -- "$@") eval set -- "$options"
--
2.21.0
Re: [Qemu-devel] [PATCH v4 6/10] qemu-binfmt-conf.sh: honour QEMU_PATH and/or QEMU_SUFFIX
Quoted 38 lines · Unai Martinez-Corral
Allow to set 'path' or 'suffix' through environment variables, consistently with 'persistent' and 'credential'.
Signed-off-by Unai Martinez-Corral <[email protected]>--- scripts/qemu-binfmt-conf.sh | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-)scripts/qemu-binfmt-conf.sh +3
-6@@ -177,7 +177,7 @@ Options and associated environment variables: Argument Env-variable Description -h|--help display this usage -Q|--path PATH: QEMU_PATH set path to qemu interpreter(s) --F|--suffix SUFFIX: add a suffix to the default interpreter name +-F|--suffix SUFFIX: QEMU_SUFFIX add a suffix to the default interpreter name -d|--debian: don't write into /proc, generate update-binfmts templates -s|--systemd CPU: don't write into /proc, generate file for systemd-binfmt.service for the given CPU; if CPU is "ALL",@@ -318,13 +318,11 @@ BINFMT_SET=qemu_register_interpreter SYSTEMDDIR="/etc/binfmt.d" DEBIANDIR="/usr/share/binfmts" -QEMU_PATH=/usr/local/bin - +QEMU_PATH="${QEMU_PATH:-/usr/local/bin}" +QEMU_SUFFIX="${QEMU_SUFFIX:-}" QEMU_CREDENTIAL="${QEMU_CREDENTIAL:-no}" QEMU_PERSISTENT="${QEMU_PERSISTENT:-no}" -QEMU_SUFFIX="" - options=$(getopt -o ds:Q:S:e:hcp -l debian,systemd:,path:,suffix:,exportdir:,help,credential,persistent -- "$@") eval set -- "$options" --
Quoted 2 lines
2.21.0
PATCH v4 7/10 qemu-binfmt-conf.sh: generalize CPU to positional TARGETS
In reply to Unai Martinez-CorralThis breaks brackward compatibility.
Option '--systemd CPU' allows to register binfmt interpreters for a single target architecture or for 'ALL' (of them). This patch generalizes the approach to support it in any mode (default, '--debian' or '--systemd'). To do so, option 'systemd' is changed to be boolean (no args). Then, all the positional arguments are considered to be a list of target architectures.
If no positional arguments are provided, all of the architectures in qemu_target_list are registered. Conversely, argument value 'NONE' allows to make a 'dry run' of the script. I.e., checks are executed according to the mode, but no interpreter is registered.
Support QEMU_TARGETS environment variable, consistently with 'path', 'suffix', 'persistent' and 'credential', The supported formats are the same as for positional arguments, which have priority. If both the variable and the list of positional arguments are empty, defaults to qemu_target_list.
--- scripts/qemu-binfmt-conf.sh | 80 +++++++++++++++++++++---------------- 1 file changed, 45 insertions(+), 35 deletions(-)
scripts/qemu-binfmt-conf.sh +45 -35
@@ -6,6 +6,27 @@ mips mipsel mipsn32 mipsn32el mips64 mips64el \ sh4 sh4eb s390x aarch64 aarch64_be hppa riscv32 riscv64 xtensa xtensaeb \ microblaze microblazeel or1k x86_64" +# check if given TARGETS is/are in the supported target list +qemu_check_target_list() { + if [ $# -eq 0 ] ; then + checked_target_list="$qemu_target_list" + return + fi + for target ; do + for cpu in $qemu_target_list ; do + if [ "x$cpu" = "x$target" ] ; then + checked_target_list="$checked_target_list $target" + break + fi + done + if [ "$unknown_target" = "true" ] ; then + echo "ERROR: unknown CPU \"$target\"" 1>&2 + usage + exit 1 + fi + done +} + i386_magic='\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x03\x00' i386_mask='\xff\xff\xff\xff\xff\xfe\xfe\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff' i386_family=i386
@@ -167,21 +188,25 @@ qemu_get_family() { usage() { cat <<EOF +Usage: qemu-binfmt-conf.sh [options] [TARGETS] -Usage: qemu-binfmt-conf.sh [options] - -Configure binfmt_misc to use qemu interpreter +Configure binfmt_misc to use qemu interpreter for the given TARGETS. Options and associated environment variables: Argument Env-variable Description +TARGETS QEMU_TARGETS A single arch name or a list of them (see all names below); + if empty, configure all known targets; + if 'NONE', no interpreter is configured. -h|--help display this usage -Q|--path PATH: QEMU_PATH set path to qemu interpreter(s) -F|--suffix SUFFIX: QEMU_SUFFIX add a suffix to the default interpreter name -d|--debian: don't write into /proc, generate update-binfmts templates --s|--systemd CPU: don't write into /proc, generate file for - systemd-binfmt.service for the given CPU; if CPU is "ALL", - generate a file for all known cpus. +-s|--systemd: don't write into /proc, generate file(s) for + systemd-binfmt.service; environment variable HOST_ARCH + allows to override 'uname' to generate configuration files + for a different architecture than the current one. + -e|--exportdir PATH: DEBIANDIR define where to write configuration files SYSTEMDDIR -c|--credential: QEMU_CREDENTIAL (yes) credential and security tokens are calculated according
@@ -197,14 +222,7 @@ To remove interpreter, use : sudo update-binfmts --package qemu-CPU --remove qemu-CPU $QEMU_PATH -With systemd, binfmt files are loaded by systemd-binfmt.service - -The environment variable HOST_ARCH allows to override 'uname' to generate configuration files for a -different architecture than the current one. - -where CPU is one of: - - $qemu_target_list +QEMU target list: $qemu_target_list EOF }
@@ -288,9 +306,15 @@ qemu_set_binfmts() { # probe cpu type host_family=$(qemu_get_family) - # register the interpreter for each cpu except for the native one + # reduce the list of target interpreters to those given in the CLI + [ $# -eq 0 ] && targets="${QEMU_TARGETS:-}" || targets="$@" + if [ "x$targets" = "xNONE" ] ; then + return + fi + qemu_check_target_list $targets - for cpu in ${qemu_target_list} ; do + # register the interpreter for each target except for the native one + for cpu in $checked_target_list ; do magic=$(eval echo \$${cpu}_magic) mask=$(eval echo \$${cpu}_mask) family=$(eval echo \$${cpu}_family)
@@ -318,12 +342,13 @@ BINFMT_SET=qemu_register_interpreter SYSTEMDDIR="/etc/binfmt.d" DEBIANDIR="/usr/share/binfmts" +QEMU_TARGETS="${QEMU_TARGETS:-}" QEMU_PATH="${QEMU_PATH:-/usr/local/bin}" QEMU_SUFFIX="${QEMU_SUFFIX:-}" QEMU_CREDENTIAL="${QEMU_CREDENTIAL:-no}" QEMU_PERSISTENT="${QEMU_PERSISTENT:-no}" -options=$(getopt -o ds:Q:S:e:hcp -l debian,systemd:,path:,suffix:,exportdir:,help,credential,persistent -- "$@") +options=$(getopt -o dsQ:S:e:hcp -l debian,systemd,path:,suffix:,exportdir:,help,credential,persistent -- "$@") eval set -- "$options" while true ; do
@@ -337,23 +362,6 @@ while true ; do CHECK=qemu_check_systemd BINFMT_SET=qemu_generate_systemd EXPORTDIR=${EXPORTDIR:-$SYSTEMDDIR} - shift - # check given cpu is in the supported CPU list - if [ "$1" != "ALL" ] ; then - for cpu in ${qemu_target_list} ; do - if [ "$cpu" = "$1" ] ; then - break - fi - done - - if [ "$cpu" = "$1" ] ; then - qemu_target_list="$1" - else - echo "ERROR: unknown CPU \"$1\"" 1>&2 - usage - exit 1 - fi - fi ;; -Q|--path) shift
@@ -384,5 +392,7 @@ while true ; do shift done +shift + $CHECK -qemu_set_binfmts +qemu_set_binfmts "$@"
--
2.21.0
Re: [Qemu-devel] [PATCH v4 7/10] qemu-binfmt-conf.sh: generalize CPU to positional TARGETS
Quoted 37 lines · Unai Martinez-Corral
This breaks brackward compatibility.
Option '--systemd CPU' allows to register binfmt interpreters for a single target architecture or for 'ALL' (of them). This patch generalizes the approach to support it in any mode (default, '--debian' or '--systemd'). To do so, option 'systemd' is changed to be boolean (no args). Then, all the positional arguments are considered to be a list of target architectures.
If no positional arguments are provided, all of the architectures in
qemu_target_listare registered. Conversely, argument value 'NONE' allows to make a 'dry run' of the script. I.e., checks are executed according to the mode, but no interpreter is registered.Support
QEMU_TARGETSenvironment variable, consistently with 'path', 'suffix', 'persistent' and 'credential', The supported formats are the same as for positional arguments, which have priority. If both the variable and the list of positional arguments are empty, defaults toqemu_target_list.Signed-off-by Unai Martinez-Corral <[email protected]>--- scripts/qemu-binfmt-conf.sh | 80 +++++++++++++++++++++---------------- 1 file changed, 45 insertions(+), 35 deletions(-)scripts/qemu-binfmt-conf.sh +4
-0@@ -6,6 +6,27 @@ mips mipsel mipsn32 mipsn32el mips64 mips64el \ sh4 sh4eb s390x aarch64 aarch64_be hppa riscv32 riscv64 xtensa xtensaeb \ microblaze microblazeel or1k x86_64" +# check if given TARGETS is/are in the supported target list +qemu_check_target_list() { + if [ $# -eq 0 ] ; then + checked_target_list="$qemu_target_list"
scripts/qemu-binfmt-conf.sh mips mipsel mipsn32 mipsn32el mips64 mips64el \ · line 22
Quoted 10 lines
scripts/qemu-binfmt-conf.sh +10
-0+ return + fi + for target ; do + for cpu in $qemu_target_list ; do + if [ "x$cpu" = "x$target" ] ; then + checked_target_list="$checked_target_list $target" + break + fi + done + if [ "$unknown_target" = "true" ] ; then
if [ "x$cpu" != "x$target" ] ; then
Quoted 26 lines
scripts/qemu-binfmt-conf.sh +11
-3+ echo "ERROR: unknown CPU \"$target\"" 1>&2 + usage + exit 1 + fi + done +} + i386_magic='\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x03\x00' i386_mask='\xff\xff\xff\xff\xff\xfe\xfe\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff' i386_family=i386@@ -167,21 +188,25 @@ qemu_get_family() { usage() { cat <<EOF +Usage: qemu-binfmt-conf.sh [options] [TARGETS] -Usage: qemu-binfmt-conf.sh [options] - -Configure binfmt_misc to use qemu interpreter +Configure binfmt_misc to use qemu interpreter for the given TARGETS. Options and associated environment variables: Argument Env-variable Description +TARGETS QEMU_TARGETS A single arch name or a list of them (see all names below); + if empty, configure all known targets;
scripts/qemu-binfmt-conf.sh qemu_get_family() { · line 206
Quoted 10 lines
scripts/qemu-binfmt-conf.sh +3
-3+ if 'NONE', no interpreter is configured. -h|--help display this usage -Q|--path PATH: QEMU_PATH set path to qemu interpreter(s) -F|--suffix SUFFIX: QEMU_SUFFIX add a suffix to the default interpreter name -d|--debian: don't write into /proc, generate update-binfmts templates --s|--systemd CPU: don't write into /proc, generate file for - systemd-binfmt.service for the given CPU; if CPU is "ALL", - generate a file for all known cpus. +-s|--systemd: don't write into /proc, generate file(s) for + systemd-binfmt.service; environment variable HOST_ARCH
why HOST_ARCH appears here?
Quoted 91 lines
scripts/qemu-binfmt-conf.sh +17
-30+ allows to override 'uname' to generate configuration files + for a different architecture than the current one. + -e|--exportdir PATH: DEBIANDIR define where to write configuration files SYSTEMDDIR -c|--credential: QEMU_CREDENTIAL (yes) credential and security tokens are calculated according@@ -197,14 +222,7 @@ To remove interpreter, use : sudo update-binfmts --package qemu-CPU --remove qemu-CPU $QEMU_PATH -With systemd, binfmt files are loaded by systemd-binfmt.service - -The environment variable HOST_ARCH allows to override 'uname' to generate configuration files for a -different architecture than the current one. - -where CPU is one of: - - $qemu_target_list +QEMU target list: $qemu_target_list EOF }@@ -288,9 +306,15 @@ qemu_set_binfmts() { # probe cpu type host_family=$(qemu_get_family) - # register the interpreter for each cpu except for the native one + # reduce the list of target interpreters to those given in the CLI + [ $# -eq 0 ] && targets="${QEMU_TARGETS:-}" || targets="$@" + if [ "x$targets" = "xNONE" ] ; then + return + fi + qemu_check_target_list $targets - for cpu in ${qemu_target_list} ; do + # register the interpreter for each target except for the native one + for cpu in $checked_target_list ; do magic=$(eval echo \$${cpu}_magic) mask=$(eval echo \$${cpu}_mask) family=$(eval echo \$${cpu}_family)@@ -318,12 +342,13 @@ BINFMT_SET=qemu_register_interpreter SYSTEMDDIR="/etc/binfmt.d" DEBIANDIR="/usr/share/binfmts" +QEMU_TARGETS="${QEMU_TARGETS:-}" QEMU_PATH="${QEMU_PATH:-/usr/local/bin}" QEMU_SUFFIX="${QEMU_SUFFIX:-}" QEMU_CREDENTIAL="${QEMU_CREDENTIAL:-no}" QEMU_PERSISTENT="${QEMU_PERSISTENT:-no}" -options=$(getopt -o ds:Q:S:e:hcp -l debian,systemd:,path:,suffix:,exportdir:,help,credential,persistent -- "$@") +options=$(getopt -o dsQ:S:e:hcp -l debian,systemd,path:,suffix:,exportdir:,help,credential,persistent -- "$@") eval set -- "$options" while true ; do@@ -337,23 +362,6 @@ while true ; do CHECK=qemu_check_systemd BINFMT_SET=qemu_generate_systemd EXPORTDIR=${EXPORTDIR:-$SYSTEMDDIR} - shift - # check given cpu is in the supported CPU list - if [ "$1" != "ALL" ] ; then - for cpu in ${qemu_target_list} ; do - if [ "$cpu" = "$1" ] ; then - break - fi - done - - if [ "$cpu" = "$1" ] ; then - qemu_target_list="$1" - else - echo "ERROR: unknown CPU \"$1\"" 1>&2 - usage - exit 1 - fi - fi ;; -Q|--path) shift@@ -384,5 +392,7 @@ while true ; do shift done +shift + $CHECK -qemu_set_binfmts +qemu_set_binfmts "$@" --2.21.0
Re: [Qemu-devel] [PATCH v4 7/10] qemu-binfmt-conf.sh: generalize CPU to positional TARGETS
2019/3/11 12:14, Laurent Vivier:
Quoted 5 lines · Unai Martinez-Corral
Quoted 2 lines
+ if [ "$unknown_target" = "true" ] ; then
if [ "x$cpu" != "x$target" ] ; then
My bad. I fixed it before squashing, and broke it again when doing it.
Quoted 4 lines
Quoted 2 lines
+-s|--systemd: don't write into /proc, generate file(s) for + systemd-binfmt.service; environment variable HOST_ARCHwhy
HOST_ARCHappears here?
The existing comment seems to be specific to systemd:
https://github.com/qemu/qemu/blob/master/scripts/qemu-binfmt-conf.sh#L201-L204
'systemd' is the single mode in which it makes sense to generate a bunch of configuration files for a different architecture than the current one, isn't it?
Regards,
Unai
Re: [Qemu-devel] [PATCH v4 7/10] qemu-binfmt-conf.sh: generalize CPU to positional TARGETS
Quoted 12 lines · Unai Martinez Corral
2019/3/11 12:14, Laurent Vivier:
Quoted 5 lines · Unai Martinez-Corral
Quoted 2 lines
+ if [ "$unknown_target" = "true" ] ; then
if [ "x$cpu" != "x$target" ] ; thenMy bad. I fixed it before squashing, and broke it again when doing it.
Quoted 3 lines
Quoted 2 lines
+-s|--systemd: don't write into /proc, generate file(s) for + systemd-binfmt.service; environment variable HOST_ARCH
Quoted 7 lines
Quoted 1 line
why
HOST_ARCHappears here?The existing comment seems to be specific to systemd:
https://github.com/qemu/qemu/blob/master/scripts/qemu-binfmt-conf.sh#L201-L204
'systemd' is the single mode in which it makes sense to generate a bunch of configuration files for a different architecture than the current one, isn't it?
No, it's not specific to systemd. If we register an interpreter for the current architecture we can make it unusable.
I've proposed sometime ago a kernel patch to set binfmt_misc configuration by namespace to avoid this kind of problem but it has never been merged:
[v6,0/1] ns: introduce binfmt_misc namespace
https://patchwork.kernel.org/cover/10634807/
Thanks,
Laurent
Re: [Qemu-devel] [PATCH v4 7/10] qemu-binfmt-conf.sh: generalize CPU to positional TARGETS
2019/3/11 a las 14:36, Laurent Vivier:
Quoted 9 lines · Unai Martinez Corral
Quoted 8 lines
2019/3/11 12:14, Laurent Vivier:
Quoted 6 lines · Unai Martinez-Corral
Quoted 3 lines
+-s|--systemd: don't write into /proc, generate file(s) for + systemd-binfmt.service; environment variable HOST_ARCHwhy
HOST_ARCHappears here?
Quoted 8 lines
Quoted 5 lines
The existing comment seems to be specific to systemd:
https://github.com/qemu/qemu/blob/master/scripts/qemu-binfmt-conf.sh#L201-L204
'systemd' is the single mode in which it makes sense to generate a bunch of configuration files for a different architecture than the current one, isn't it?No, it's not specific to systemd. If we register an interpreter for the current architecture we can make it unusable.
I think we are not understanding each other in this point:
The comment about HOST_ARCH in the current master branch is as follows:
Quoted 3 lines
With systemd, binfmt files are loaded by systemd-binfmt.service
The environment variable
HOST_ARCHallows to override 'uname' to generate
configuration files for a different architecture than the current one.
That's why I assumed that the envvar is meant to be used with systemd only. Certainly, withou systemd no configuration files are generated at all; interpreters are directly registered/configured.
However, the implementation takes HOST_ARCH into account with no regard to 'systemd' or 'debian'. It is used unconditionally. This has been like this since the base of the current script was pushed in 2016/1/29.
So, what is your proposal?
- Move the comment below, as it was before.
- Add a patch to only take HOST_ARCH into account for systemd (and debian?)
- Remove HOST_ARCH and the comment from the script (and take it back if you patch to the kernel is accepted some day).
I will wait to sort this out before pushing v5. I think that all the remaining issues are addressed already:
https://github.com/umarcor/qemu/blob/series-qemu-binfmt-conf/scripts/qemu-binfmt-conf.sh
Regards,
Unai
Re: [Qemu-devel] [PATCH v4 7/10] qemu-binfmt-conf.sh: generalize CPU to positional TARGETS
Quoted 32 lines · Unai Martinez Corral
2019/3/11 a las 14:36, Laurent Vivier:
Quoted 9 lines · Unai Martinez Corral
Quoted 8 lines
2019/3/11 12:14, Laurent Vivier:
Quoted 6 lines · Unai Martinez-Corral
Quoted 3 lines
+-s|--systemd: don't write into /proc, generate file(s) for + systemd-binfmt.service; environment variable HOST_ARCHwhy
HOST_ARCHappears here?Quoted 8 lines
Quoted 5 lines
The existing comment seems to be specific to systemd:
https://github.com/qemu/qemu/blob/master/scripts/qemu-binfmt-conf.sh#L201-L204
'systemd' is the single mode in which it makes sense to generate a bunch of configuration files for a different architecture than the current one, isn't it?No, it's not specific to systemd. If we register an interpreter for the current architecture we can make it unusable.
I think we are not understanding each other in this point:
The comment about
HOST_ARCHin the current master branch is as follows:Quoted 3 lines
With systemd, binfmt files are loaded by systemd-binfmt.service
The environment variable
HOST_ARCHallows to override 'uname' to generateconfiguration files for a different architecture than the current one.
That's why I assumed that the envvar is meant to be used with systemd only. Certainly, withou systemd no configuration files are generated at all; interpreters are directly registered/configured.
Quoted 8 lines
However, the implementation takes
HOST_ARCHinto account with no regard to 'systemd' or 'debian'. It is used unconditionally. This has been like this since the base of the current script was pushed in 2016/1/29.So, what is your proposal?
- Move the comment below, as it was before.
Yes, move the comment below as it was before.
Thanks,
LAurent
PATCH v4 8/10 qemu-binfmt-conf.sh: add option --clear
In reply to Unai Martinez-CorralThis is a partial implementation.
Allows to remove a single or a list of already registered binfmt interpreters. Valid values are those in qemu_target_list. If TARGETS is empty, all the existing 'qemu-*' interpreters are removed.
This is partial because 'debian' and 'systemd' configurations are not supported. The script will exit with error 'option clear not implemented for this mode yet'.
Removal is done by printing '-1' as explained at:
https://www.kernel.org/doc/Documentation/admin-guide/binfmt-misc.rst
--- scripts/qemu-binfmt-conf.sh | 41 ++++++++++++++++++++++++++++++++++--- 1 file changed, 38 insertions(+), 3 deletions(-)
scripts/qemu-binfmt-conf.sh +38 -3
@@ -196,7 +196,7 @@ Options and associated environment variables: Argument Env-variable Description TARGETS QEMU_TARGETS A single arch name or a list of them (see all names below); - if empty, configure all known targets; + if empty, configure/clear all known targets; if 'NONE', no interpreter is configured. -h|--help display this usage -Q|--path PATH: QEMU_PATH set path to qemu interpreter(s)
@@ -206,9 +206,10 @@ TARGETS QEMU_TARGETS A single arch name or a list of them (see systemd-binfmt.service; environment variable HOST_ARCH allows to override 'uname' to generate configuration files for a different architecture than the current one. - -e|--exportdir PATH: DEBIANDIR define where to write configuration files SYSTEMDDIR +-c|--clear: QEMU_CLEAR (yes) remove registered interpreters for target TARGETS; + then exit. -c|--credential: QEMU_CREDENTIAL (yes) credential and security tokens are calculated according to the binary to interpret -p|--persistent: QEMU_PERSISTENT (yes) load the interpreter and keep it in memory; all future
@@ -336,6 +337,25 @@ qemu_set_binfmts() { done } +qemu_clear_notimplemented() { + echo "ERROR: option clear not implemented for this mode yet" 1>&2 + usage + exit 1 +} + +qemu_clear_interpreter() { + names='qemu-*' + if [ $# -ne 0 ] ; then + qemu_check_target_list $1 + unset names pre + for t in $checked_target_list ; do + names="${names}${pre}qemu-$t" + pre=' -o -name ' + done + fi + find /proc/sys/fs/binfmt_misc/ -type f -name $names -exec sh -c 'printf %s -1 > {}' \; +} + CHECK=qemu_check_bintfmt_misc BINFMT_SET=qemu_register_interpreter
@@ -347,12 +367,16 @@ QEMU_PATH="${QEMU_PATH:-/usr/local/bin}" QEMU_SUFFIX="${QEMU_SUFFIX:-}" QEMU_CREDENTIAL="${QEMU_CREDENTIAL:-no}" QEMU_PERSISTENT="${QEMU_PERSISTENT:-no}" +QEMU_CLEAR="${QEMU_CLEAR:-no}" -options=$(getopt -o dsQ:S:e:hcp -l debian,systemd,path:,suffix:,exportdir:,help,credential,persistent -- "$@") +options=$(getopt -o cdsQ:S:e:hcp -l clear,debian,systemd,path:,suffix:,exportdir:,help,credential,persistent -- "$@") eval set -- "$options" while true ; do case "$1" in + -c|--clear) + QEMU_CLEAR="yes" + ;; -d|--debian) CHECK=qemu_check_debian BINFMT_SET=qemu_generate_debian
@@ -395,4 +419,15 @@ done shift $CHECK + +if [ "x$QEMU_CLEAR" = "xyes" ] ; then + case "$BINFMT_SET" in + *debian) BINFMT_CLEAR=qemu_clear_notimplemented ;; + *systemd) BINFMT_CLEAR=qemu_clear_notimplemented ;; + *) BINFMT_CLEAR=qemu_clear_interpreter + esac + $BINFMT_CLEAR "$@" + exit +fi + qemu_set_binfmts "$@"
--
2.21.0
Re: [Qemu-devel] [PATCH v4 8/10] qemu-binfmt-conf.sh: add option --clear
Quoted 55 lines · Unai Martinez-Corral
This is a partial implementation.
Allows to remove a single or a list of already registered binfmt interpreters. Valid values are those in
qemu_target_list. If TARGETS is empty, all the existing 'qemu-*' interpreters are removed.This is partial because 'debian' and 'systemd' configurations are not supported. The script will exit with error 'option clear not implemented for this mode yet'.
Removal is done by printing '-1' as explained at:
https://www.kernel.org/doc/Documentation/admin-guide/binfmt-misc.rstSigned-off-by Unai Martinez-Corral <[email protected]>--- scripts/qemu-binfmt-conf.sh | 41 ++++++++++++++++++++++++++++++++++--- 1 file changed, 38 insertions(+), 3 deletions(-)scripts/qemu-binfmt-conf.sh +10
-2@@ -196,7 +196,7 @@ Options and associated environment variables: Argument Env-variable Description TARGETS QEMU_TARGETS A single arch name or a list of them (see all names below); - if empty, configure all known targets; + if empty, configure/clear all known targets; if 'NONE', no interpreter is configured. -h|--help display this usage -Q|--path PATH: QEMU_PATH set path to qemu interpreter(s)@@ -206,9 +206,10 @@ TARGETS QEMU_TARGETS A single arch name or a list of them (see systemd-binfmt.service; environment variable HOST_ARCH allows to override 'uname' to generate configuration files for a different architecture than the current one. - -e|--exportdir PATH: DEBIANDIR define where to write configuration files SYSTEMDDIR +-c|--clear: QEMU_CLEAR (yes) remove registered interpreters for target TARGETS; + then exit. -c|--credential: QEMU_CREDENTIAL (yes) credential and security tokens are calculated according to the binary to interpret -p|--persistent: QEMU_PERSISTENT (yes) load the interpreter and keep it in memory; all future@@ -336,6 +337,25 @@ qemu_set_binfmts() { done } +qemu_clear_notimplemented() { + echo "ERROR: option clear not implemented for this mode yet" 1>&2 + usage + exit 1 +} + +qemu_clear_interpreter() {
scripts/qemu-binfmt-conf.sh qemu_set_binfmts() { · line 356
Quoted 10 lines
scripts/qemu-binfmt-conf.sh +10
-0+ names='qemu-*' + if [ $# -ne 0 ] ; then + qemu_check_target_list $1 + unset names pre + for t in $checked_target_list ; do + names="${names}${pre}qemu-$t" + pre=' -o -name ' + done + fi + find /proc/sys/fs/binfmt_misc/ -type f -name $names -exec sh -c 'printf %s -1 > {}' \;
The qemu-* will be expanded here if you have a qemu-XXX in the current directory. You must use "$names".
But:
To remove all, you can do:
sh -c 'printf %s -1 > /proc/sys/fs/binfmt_misc/status'
so something like
if [ $# -eq 0 ] ; then
sh -c 'printf %s -1 > /proc/sys/fs/binfmt_misc/status
fiqemu_check_target_list $1
for t in $checked_target_list ; do
sh -c 'printf %s -1 > /proc/sys/fs/binfmt_misc/qemu-$t'
done
But I think you should also taking care of the suffix.
Quoted 24 lines
scripts/qemu-binfmt-conf.sh +7
-1+} + CHECK=qemu_check_bintfmt_misc BINFMT_SET=qemu_register_interpreter@@ -347,12 +367,16 @@ QEMU_PATH="${QEMU_PATH:-/usr/local/bin}" QEMU_SUFFIX="${QEMU_SUFFIX:-}" QEMU_CREDENTIAL="${QEMU_CREDENTIAL:-no}" QEMU_PERSISTENT="${QEMU_PERSISTENT:-no}" +QEMU_CLEAR="${QEMU_CLEAR:-no}" -options=$(getopt -o dsQ:S:e:hcp -l debian,systemd,path:,suffix:,exportdir:,help,credential,persistent -- "$@") +options=$(getopt -o cdsQ:S:e:hcp -l clear,debian,systemd,path:,suffix:,exportdir:,help,credential,persistent -- "$@") eval set -- "$options" while true ; do case "$1" in + -c|--clear) + QEMU_CLEAR="yes" + ;; -d|--debian) CHECK=qemu_check_debian BINFMT_SET=qemu_generate_debian
scripts/qemu-binfmt-conf.sh done · line 428
Quoted 10 lines
scripts/qemu-binfmt-conf.sh +7
-0@@ -395,4 +419,15 @@ done shift $CHECK + +if [ "x$QEMU_CLEAR" = "xyes" ] ; then + case "$BINFMT_SET" in + *debian) BINFMT_CLEAR=qemu_clear_notimplemented ;; + *systemd) BINFMT_CLEAR=qemu_clear_notimplemented ;; + *) BINFMT_CLEAR=qemu_clear_interpreter + esac
Put this in the previous case for decoding options, please.
Quoted 8 lines
scripts/qemu-binfmt-conf.sh +4
-1+ $BINFMT_CLEAR "$@" + exit +fi + qemu_set_binfmts "$@" --2.21.0
Re: [Qemu-devel] [PATCH v4 8/10] qemu-binfmt-conf.sh: add option --clear
2019/3/11 12:04, Laurent Vivier:
Quoted 4 lines
Quoted 1 line
+ find
/proc/sys/fs/binfmt_misc/-type f -name $names -exec sh -c 'printf %s -1 > {}' \;The qemu-* will be expanded here if you have a qemu-XXX in the current directory. You must use "$names".
You are correct. Indeed, I had not spotted it because I introduced a bug when renaming 'reset' to 'clear'. Precisely, '-c' was being used
twice: for 'credential' and for 'clear'. Both issues will be fixed in the next version.
Quoted 7 lines
But:
To remove all, you can do:
sh -c 'printf %s -1 >/proc/sys/fs/binfmt_misc/status'so something like
Quoted 7 lines
if [ $# -eq 0 ] ; then
sh -c 'printf %s -1 >/proc/sys/fs/binfmt_misc/status
fiqemu_check_target_list$1
for t in $checked_target_list ; do
sh -c 'printf %s -1 >/proc/sys/fs/binfmt_misc/qemu-$t'
done
Wouldn't writing to 'status' remove all the interpreters, and not only those that correspond to qemu?
Quoted 1 line
But I think you should also taking care of the suffix.
I think that the suffix is not related to the entry in '/proc/sys/fs/binfmt_misc/'. See, e.g.:
package qemu-$cpu
interpreter $qemu
So, independently of which is the executable (interpreter), the package name does not include the suffix.
Quoted 8 lines
scripts/qemu-binfmt-conf.sh done · line 428
Quoted 6 lines
scripts/qemu-binfmt-conf.sh +6
-0+if [ "x$QEMU_CLEAR" = "xyes" ] ; then + case "$BINFMT_SET" in + *debian) BINFMT_CLEAR=qemu_clear_notimplemented ;; + *systemd) BINFMT_CLEAR=qemu_clear_notimplemented ;; + *) BINFMT_CLEAR=qemu_clear_interpreter + esacPut this in the previous case for decoding options, please.
It won't work. This if/case block requires all the options to be already parsed and processed. If I put it in the case for '-r|--clear' above, it will only work only when '-r' is given after '--debian' or '--systemd'. Otherwise, BINFMT_SET will always be qemu_register_interpreter when '-crear' is evaluated. I think that we should not rely on the users providing the options in a specific order.
Regards,
Unai
Re: [Qemu-devel] [PATCH v4 8/10] qemu-binfmt-conf.sh: add option --clear
Quoted 26 lines · Unai Martinez Corral
2019/3/11 12:04, Laurent Vivier:
Quoted 4 lines
Quoted 1 line
+ find
/proc/sys/fs/binfmt_misc/-type f -name $names -exec sh -c 'printf %s -1 > {}' \;The qemu-* will be expanded here if you have a qemu-XXX in the current directory. You must use "$names".
You are correct. Indeed, I had not spotted it because I introduced a bug when renaming 'reset' to 'clear'. Precisely, '-c' was being used
twice: for 'credential' and for 'clear'. Both issues will be fixed in the next version.Quoted 7 lines
But:
To remove all, you can do:
sh -c 'printf %s -1 >/proc/sys/fs/binfmt_misc/status'so something like
Quoted 7 lines
if [ $# -eq 0 ] ; then
sh -c 'printf %s -1 >/proc/sys/fs/binfmt_misc/status
fiqemu_check_target_list$1
for t in $checked_target_list ; do
sh -c 'printf %s -1 >/proc/sys/fs/binfmt_misc/qemu-$t'
done
Quoted 2 lines
Wouldn't writing to 'status' remove all the interpreters, and not only those that correspond to qemu?
Yes, you are right.
Quoted 11 lines
Quoted 2 lines
But I think you should also taking care of the suffix.
I think that the suffix is not related to the entry in '
/proc/sys/fs/binfmt_misc/'. See, e.g.:package qemu-$cpu
interpreter $qemuSo, independently of which is the executable (interpreter), the package name does not include the suffix.
Yes, you are right.
Quoted 9 lines
Quoted 8 lines
Review
Quoted 6 lines
(quoted diff) +6
-0+if [ "x$QEMU_CLEAR" = "xyes" ] ; then + case "$BINFMT_SET" in + *debian) BINFMT_CLEAR=qemu_clear_notimplemented ;; + *systemd) BINFMT_CLEAR=qemu_clear_notimplemented ;; + *) BINFMT_CLEAR=qemu_clear_interpreter + esacPut this in the previous case for decoding options, please.
Quoted 7 lines
It won't work. This if/case block requires all the options to be already parsed and processed. If I put it in the case for '-r|--clear' above, it will only work only when '-r' is given after '--debian' or '--systemd'. Otherwise,
BINFMT_SETwill always beqemu_register_interpreterwhen '-crear' is evaluated. I think that we should not rely on the users providing the options in a specific order.
I meant something like this:
scripts/qemu-binfmt-conf.sh +0 -0
@@ -327,17 +327,23 @@ QEMU_SUFFIX="" options=$(getopt -o ds:Q:S:e:hc:p: -l
debian,systemd:,qemu-path:,qemu-suffix:,exportdir:,help,credential:,persistent:
-- "$@")
eval set -- "$options"
+BINFMT_CLEAR=qemu_clear_interpreter
while true ; do
case "$1" in
+ -c|--clear)
+ QEMU_CLEAR="yes"
+ ;;
-d|--debian)
CHECK=qemu_check_debian
BINFMT_SET=qemu_generate_debian
EXPORTDIR=${EXPORTDIR:-$DEBIANDIR}
+ BINFMT_CLEAR=qemu_clear_notimplemented
;;
-s|--systemd)
CHECK=qemu_check_systemd
BINFMT_SET=qemu_generate_systemd
EXPORTDIR=${EXPORTDIR:-$SYSTEMDDIR}+ BINFMT_CLEAR=qemu_clear_notimplemented
shift
# check given cpu is in the supported CPU list if [ "$1" != "ALL" ] ; then
@@ -387,5 +393,9 @@ while true ; do
shift
done
+if [ "x$QEMU_CLEAR" = "xyes" ] ; then
+ $BINFMT_CLEAR "$@"
+ exit
+fi
$CHECK
qemu_set_binfmts
PATCH v4 9/10 qemu-binfmt-conf.sh: update usage()
In reply to Unai Martinez-CorralReorder how the options are presented to the user. Move 'systemd' and 'debian' to the end, so that the latter is close to the additional comments and example commands about it.
Add list of default values for environment variables.
--- scripts/qemu-binfmt-conf.sh | 28 ++++++++++++++++++---------- 1 file changed, 18 insertions(+), 10 deletions(-)
scripts/qemu-binfmt-conf.sh +18 -10
@@ -201,19 +201,27 @@ TARGETS QEMU_TARGETS A single arch name or a list of them (see -h|--help display this usage -Q|--path PATH: QEMU_PATH set path to qemu interpreter(s) -F|--suffix SUFFIX: QEMU_SUFFIX add a suffix to the default interpreter name --d|--debian: don't write into /proc, generate update-binfmts templates --s|--systemd: don't write into /proc, generate file(s) for - systemd-binfmt.service; environment variable HOST_ARCH - allows to override 'uname' to generate configuration files - for a different architecture than the current one. +-p|--persistent: QEMU_PERSISTENT (yes) load the interpreter and keep it in memory; all future + uses are cloned from the open file. +-c|--credential: QEMU_CREDENTIAL (yes) credential and security tokens are calculated according + to the binary to interpret -e|--exportdir PATH: DEBIANDIR define where to write configuration files SYSTEMDDIR -c|--clear: QEMU_CLEAR (yes) remove registered interpreters for target TARGETS; then exit. --c|--credential: QEMU_CREDENTIAL (yes) credential and security tokens are calculated according - to the binary to interpret --p|--persistent: QEMU_PERSISTENT (yes) load the interpreter and keep it in memory; all future - uses are cloned from the open file. +-s|--systemd: don't write into /proc, generate file(s) for + systemd-binfmt.service; environment variable HOST_ARCH + allows to override 'uname' to generate configuration files + for a different architecture than the current one. +-d|--debian: don't write into /proc, generate update-binfmts templates + +Defaults: +QEMU_TARGETS=$QEMU_TARGETS +QEMU_PATH=$QEMU_PATH +QEMU_SUFFIX=$QEMU_SUFFIX +QEMU_PERSISTENT=$QEMU_PERSISTENT +QEMU_CREDENTIAL=$QEMU_CREDENTIAL +QEMU_CLEAR=$QEMU_CLEAR To import templates with update-binfmts, use :
@@ -365,8 +373,8 @@ DEBIANDIR="/usr/share/binfmts" QEMU_TARGETS="${QEMU_TARGETS:-}" QEMU_PATH="${QEMU_PATH:-/usr/local/bin}" QEMU_SUFFIX="${QEMU_SUFFIX:-}" -QEMU_CREDENTIAL="${QEMU_CREDENTIAL:-no}" QEMU_PERSISTENT="${QEMU_PERSISTENT:-no}" +QEMU_CREDENTIAL="${QEMU_CREDENTIAL:-no}" QEMU_CLEAR="${QEMU_CLEAR:-no}" options=$(getopt -o cdsQ:S:e:hcp -l clear,debian,systemd,path:,suffix:,exportdir:,help,credential,persistent -- "$@")
--
2.21.0
PATCH v4 10/10 qemu-binfmt-conf.sh: add --test|--dry-run
In reply to Unai Martinez-Corral--- scripts/qemu-binfmt-conf.sh | 21 +++++++++++++++------ 1 file changed, 15 insertions(+), 6 deletions(-)
scripts/qemu-binfmt-conf.sh +15 -6
@@ -196,8 +196,7 @@ Options and associated environment variables: Argument Env-variable Description TARGETS QEMU_TARGETS A single arch name or a list of them (see all names below); - if empty, configure/clear all known targets; - if 'NONE', no interpreter is configured. + if empty, configure/clear all known targets. -h|--help display this usage -Q|--path PATH: QEMU_PATH set path to qemu interpreter(s) -F|--suffix SUFFIX: QEMU_SUFFIX add a suffix to the default interpreter name
@@ -209,6 +208,8 @@ TARGETS QEMU_TARGETS A single arch name or a list of them (see SYSTEMDDIR -c|--clear: QEMU_CLEAR (yes) remove registered interpreters for target TARGETS; then exit. +-t|--test|--dry-run: QEMU_TEST (yes) test the setup with the provided arguments, but do not + configure any of the interpreters. -s|--systemd: don't write into /proc, generate file(s) for systemd-binfmt.service; environment variable HOST_ARCH allows to override 'uname' to generate configuration files
@@ -222,6 +223,7 @@ QEMU_SUFFIX=$QEMU_SUFFIX QEMU_PERSISTENT=$QEMU_PERSISTENT QEMU_CREDENTIAL=$QEMU_CREDENTIAL QEMU_CLEAR=$QEMU_CLEAR +QEMU_TEST=$QEMU_TEST To import templates with update-binfmts, use :
@@ -317,9 +319,6 @@ qemu_set_binfmts() { # reduce the list of target interpreters to those given in the CLI [ $# -eq 0 ] && targets="${QEMU_TARGETS:-}" || targets="$@" - if [ "x$targets" = "xNONE" ] ; then - return - fi qemu_check_target_list $targets # register the interpreter for each target except for the native one
@@ -376,12 +375,16 @@ QEMU_SUFFIX="${QEMU_SUFFIX:-}" QEMU_PERSISTENT="${QEMU_PERSISTENT:-no}" QEMU_CREDENTIAL="${QEMU_CREDENTIAL:-no}" QEMU_CLEAR="${QEMU_CLEAR:-no}" +QEMU_TEST="${QEMU_TEST:-no}" -options=$(getopt -o cdsQ:S:e:hcp -l clear,debian,systemd,path:,suffix:,exportdir:,help,credential,persistent -- "$@") +options=$(getopt -o tcdsQ:S:e:hcp -l test,dry-runclear,debian,systemd,path:,suffix:,exportdir:,help,credential,persistent -- "$@") eval set -- "$options" while true ; do case "$1" in + -t|--test|--dry-run) + QEMU_TEST="yes" + ;; -c|--clear) QEMU_CLEAR="yes" ;;
@@ -438,4 +441,10 @@ if [ "x$QEMU_CLEAR" = "xyes" ] ; then exit fi +if [ "x$QEMU_TEST" = "xyes" ] ; then + skip(){ + :;} + BINFMT_SET=skip +fi + qemu_set_binfmts "$@"
--
2.21.0
Re: [Qemu-devel] [PATCH v4 10/10] qemu-binfmt-conf.sh: add --test|--dry-run
Quoted 47 lines · Unai Martinez-Corral
Signed-off-by Unai Martinez-Corral <[email protected]>--- scripts/qemu-binfmt-conf.sh | 21 +++++++++++++++------ 1 file changed, 15 insertions(+), 6 deletions(-)scripts/qemu-binfmt-conf.sh +4
-5@@ -196,8 +196,7 @@ Options and associated environment variables: Argument Env-variable Description TARGETS QEMU_TARGETS A single arch name or a list of them (see all names below); - if empty, configure/clear all known targets; - if 'NONE', no interpreter is configured. + if empty, configure/clear all known targets. -h|--help display this usage -Q|--path PATH: QEMU_PATH set path to qemu interpreter(s) -F|--suffix SUFFIX: QEMU_SUFFIX add a suffix to the default interpreter name@@ -209,6 +208,8 @@ TARGETS QEMU_TARGETS A single arch name or a list of them (see SYSTEMDDIR -c|--clear: QEMU_CLEAR (yes) remove registered interpreters for target TARGETS; then exit. +-t|--test|--dry-run: QEMU_TEST (yes) test the setup with the provided arguments, but do not + configure any of the interpreters. -s|--systemd: don't write into /proc, generate file(s) for systemd-binfmt.service; environment variable HOST_ARCH allows to override 'uname' to generate configuration files@@ -222,6 +223,7 @@ QEMU_SUFFIX=$QEMU_SUFFIX QEMU_PERSISTENT=$QEMU_PERSISTENT QEMU_CREDENTIAL=$QEMU_CREDENTIAL QEMU_CLEAR=$QEMU_CLEAR +QEMU_TEST=$QEMU_TEST To import templates with update-binfmts, use :@@ -317,9 +319,6 @@ qemu_set_binfmts() { # reduce the list of target interpreters to those given in the CLI [ $# -eq 0 ] && targets="${QEMU_TARGETS:-}" || targets="$@" - if [ "x$targets" = "xNONE" ] ; then - return - fi qemu_check_target_list $targets # register the interpreter for each target except for the native one
scripts/qemu-binfmt-conf.sh QEMU_SUFFIX="${QEMU_SUFFIX:-}" · line 380
Quoted 7 lines
scripts/qemu-binfmt-conf.sh +2
-1@@ -376,12 +375,16 @@ QEMU_SUFFIX="${QEMU_SUFFIX:-}" QEMU_PERSISTENT="${QEMU_PERSISTENT:-no}" QEMU_CREDENTIAL="${QEMU_CREDENTIAL:-no}" QEMU_CLEAR="${QEMU_CLEAR:-no}" +QEMU_TEST="${QEMU_TEST:-no}" -options=$(getopt -o cdsQ:S:e:hcp -l clear,debian,systemd,path:,suffix:,exportdir:,help,credential,persistent -- "$@") +options=$(getopt -o tcdsQ:S:e:hcp -l test,dry-runclear,debian,systemd,path:,suffix:,exportdir:,help,credential,persistent -- "$@")
missing comma here.
scripts/qemu-binfmt-conf.sh QEMU_SUFFIX="${QEMU_SUFFIX:-}" · line 385
Quoted 5 lines
scripts/qemu-binfmt-conf.sh +1
-0eval set -- "$options" while true ; do case "$1" in + -t|--test|--dry-run)
We don't need multiple parameter for the same effect. You must choose between --test and --dry-run.
scripts/qemu-binfmt-conf.sh if [ "x$QEMU_CLEAR" = "xyes" ] ; then · line 447
Quoted 13 lines
scripts/qemu-binfmt-conf.sh +6
-0+ QEMU_TEST="yes" + ;; -c|--clear) QEMU_CLEAR="yes" ;;@@ -438,4 +441,10 @@ if [ "x$QEMU_CLEAR" = "xyes" ] ; then exit fi +if [ "x$QEMU_TEST" = "xyes" ] ; then + skip(){ + :;} + BINFMT_SET=skip
Why do you need a function?
Can't you set directly BINFMT_SET to ':'?
Thanks,
Laurent
Re: [Qemu-devel] [PATCH v4 10/10] qemu-binfmt-conf.sh: add --test|--dry-run
2019/3/11 11:45, Laurent Vivier:
Quoted 6 lines
Quoted 3 lines
while true ; do
case "$1" in+ -t|--test|--dry-run)
We don't need multiple parameter for the same effect. You must choose between --test and --dry-run.
Ok. I'll take 'test', because the short for '--dry-run' would be '-d' and it is already used for 'debian'.
Quoted 7 lines
scripts/qemu-binfmt-conf.sh if [ "x$QEMU_CLEAR" = "xyes" ] ; then · line 447
Quoted 4 lines
scripts/qemu-binfmt-conf.sh +4
-0+if [ "x$QEMU_TEST" = "xyes" ] ; then + skip(){ + :;} + BINFMT_SET=skipWhy do you need a function?
Can't you set directlyBINFMT_SETto ':'?
Indeed...
Regards,
Unai
Patchew URL: https://patchew.org/QEMU/20190311101428.GA11@765644dd90e5/
Patchew URL: https://patchew.org/QEMU/20190311101428.GA11@765644dd90e5/
Hi,
This series seems to have some coding style problems. See output below for more information:
Type: series
Message-id: 20190311101428.GA11@765644dd90e5
Subject: [Qemu-devel] [PATCH v4 0/10] qemu-binfmt-conf.sh
=== TEST SCRIPT BEGIN ===
#!/bin/bash
git rev-parse base > /dev/null || exit 0
git config --local diff.renamelimit 0
git config --local diff.renames True
git config --local diff.algorithm histogram./scripts/checkpatch.pl --mailback base..
=== TEST SCRIPT END ===
Updating 3c8cf5a9c21ff8782164d1def7f44bd888713384
Switched to a new branch 'test'd8be11fa48 qemu-binfmt-conf.sh: add --test|--dry-runeed2ee7cc9 qemu-binfmt-conf.sh: update usage()265805545f qemu-binfmt-conf.sh: add option --clear21298477f7 qemu-binfmt-conf.sh: generalize CPU to positional TARGETS 2b8acd4d8d qemu-binfmt-conf.sh: honour QEMU_PATH and/or QEMU_SUFFIX 35c5a1c00a qemu-binfmt-conf.sh: remove 'qemu' prefix from cli options 536212c59a qemu-binfmt-conf.sh: use the same presentation format as for qemu-* 3c5495df43 qemu-binfmt-conf.sh: add QEMU_CREDENTIAL and QEMU_PERSISTENT e4a74a66df qemu-binfmt-conf.sh: make opts -p and -c boolean c70398d854 qemu-binfmt-conf.sh: enforce safe style consistency
=== OUTPUT BEGIN ===
1/10 Checking commit c70398d85463 (qemu-binfmt-conf.sh: enforce safe style consistency)
WARNING: line over 80 characters
#53: FILE: scripts/qemu-binfmt-conf.sh:299:
+ if [ "x$magic" = "x" ] || [ "x$mask" = "x" ] || [ "x$family" = "x" ] ; then
total: 0 errors, 1 warnings, 47 lines checked
Patch 1/10 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
2/10 Checking commit e4a74a66df91 (qemu-binfmt-conf.sh: make opts -p and -c boolean)
ERROR: line over 90 characters
#51: FILE: scripts/qemu-binfmt-conf.sh:327:
+options=$(getopt -o ds:Q:S:e:hcp -l debian,systemd:,qemu-path:,qemu-suffix:,exportdir:,help,credential,persistent -- "$@")
total: 1 errors, 0 warnings, 43 lines checked
Patch 2/10 has style problems, please review. If any of these errors are false positives report them to the maintainer, see CHECKPATCH in MAINTAINERS.
3/10 Checking commit 3c5495df43d5 (qemu-binfmt-conf.sh: add QEMU_CREDENTIAL and QEMU_PERSISTENT) 4/10 Checking commit 536212c59aff (qemu-binfmt-conf.sh: use the same presentation format as for qemu-*)
WARNING: line over 80 characters
#50: FILE: scripts/qemu-binfmt-conf.sh:179:
+-F|--qemu-suffix SUFFIX: add a suffix to the default interpreter name
ERROR: line over 90 characters
#51: FILE: scripts/qemu-binfmt-conf.sh:180:
+-d|--debian: don't write into /proc, generate update-binfmts templates
ERROR: line over 90 characters
#53: FILE: scripts/qemu-binfmt-conf.sh:182:
+ systemd-binfmt.service for the given CPU; if CPU is "ALL",
ERROR: line over 90 characters
#57: FILE: scripts/qemu-binfmt-conf.sh:186:
+-c|--credential: QEMU_CREDENTIAL (yes) credential and security tokens are calculated according
ERROR: line over 90 characters
#59: FILE: scripts/qemu-binfmt-conf.sh:188:
+-p|--persistent: QEMU_PERSISTENT (yes) load the interpreter and keep it in memory; all future
ERROR: line over 90 characters
#79: FILE: scripts/qemu-binfmt-conf.sh:201:
+The environment variable HOST_ARCH allows to override 'uname' to generate configuration files for a
total: 5 errors, 1 warnings, 74 lines checked
Patch 4/10 has style problems, please review. If any of these errors are false positives report them to the maintainer, see CHECKPATCH in MAINTAINERS.
5/10 Checking commit 35c5a1c00aed (qemu-binfmt-conf.sh: remove 'qemu' prefix from cli options)
WARNING: line over 80 characters
#36: FILE: scripts/qemu-binfmt-conf.sh:180:
+-F|--suffix SUFFIX: add a suffix to the default interpreter name
ERROR: line over 90 characters
#45: FILE: scripts/qemu-binfmt-conf.sh:328:
+options=$(getopt -o ds:Q:S:e:hcp -l debian,systemd:,path:,suffix:,exportdir:,help,credential,persistent -- "$@")
total: 1 errors, 1 warnings, 38 lines checked
Patch 5/10 has style problems, please review. If any of these errors are false positives report them to the maintainer, see CHECKPATCH in MAINTAINERS.
6/10 Checking commit 2b8acd4d8d21 (qemu-binfmt-conf.sh: honour QEMU_PATH and/or QEMU_SUFFIX)
WARNING: line over 80 characters
#22: FILE: scripts/qemu-binfmt-conf.sh:180:
+-F|--suffix SUFFIX: QEMU_SUFFIX add a suffix to the default interpreter name
total: 0 errors, 1 warnings, 23 lines checked
Patch 6/10 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
7/10 Checking commit 21298477f72e (qemu-binfmt-conf.sh: generalize CPU to positional TARGETS)
ERROR: line over 90 characters
#76: FILE: scripts/qemu-binfmt-conf.sh:198:
+TARGETS QEMU_TARGETS A single arch name or a list of them (see all names below);
WARNING: line over 80 characters
#86: FILE: scripts/qemu-binfmt-conf.sh:205:
+-s|--systemd: don't write into /proc, generate file(s) for
ERROR: line over 90 characters
#87: FILE: scripts/qemu-binfmt-conf.sh:206:
+ systemd-binfmt.service; environment variable HOST_ARCH
ERROR: line over 90 characters
#88: FILE: scripts/qemu-binfmt-conf.sh:207:
+ allows to override 'uname' to generate configuration files
WARNING: line over 80 characters
#89: FILE: scripts/qemu-binfmt-conf.sh:208:
+ for a different architecture than the current one.
ERROR: line over 90 characters
#139: FILE: scripts/qemu-binfmt-conf.sh:351:
+options=$(getopt -o dsQ:S:e:hcp -l debian,systemd,path:,suffix:,exportdir:,help,credential,persistent -- "$@")
total: 4 errors, 2 warnings, 135 lines checked
Patch 7/10 has style problems, please review. If any of these errors are false positives report them to the maintainer, see CHECKPATCH in MAINTAINERS.
8/10 Checking commit 265805545ff8 (qemu-binfmt-conf.sh: add option --clear)
WARNING: line over 80 characters
#33: FILE: scripts/qemu-binfmt-conf.sh:199:
+ if empty, configure/clear all known targets;
ERROR: line over 90 characters
#44: FILE: scripts/qemu-binfmt-conf.sh:211:
+-c|--clear: QEMU_CLEAR (yes) remove registered interpreters for target TARGETS;
WARNING: line over 80 characters
#69: FILE: scripts/qemu-binfmt-conf.sh:356:
+ find /proc/sys/fs/binfmt_misc/ -type f -name $names -exec sh -c 'printf %s -1 > {}' \;
ERROR: line over 90 characters
#82: FILE: scripts/qemu-binfmt-conf.sh:372:
+options=$(getopt -o cdsQ:S:e:hcp -l clear,debian,systemd,path:,suffix:,exportdir:,help,credential,persistent -- "$@")
total: 2 errors, 2 warnings, 76 lines checked
Patch 8/10 has style problems, please review. If any of these errors are false positives report them to the maintainer, see CHECKPATCH in MAINTAINERS.
9/10 Checking commit eed2ee7cc9c8 (qemu-binfmt-conf.sh: update usage())
ERROR: line over 90 characters
#29: FILE: scripts/qemu-binfmt-conf.sh:204:
+-p|--persistent: QEMU_PERSISTENT (yes) load the interpreter and keep it in memory; all future
ERROR: line over 90 characters
#31: FILE: scripts/qemu-binfmt-conf.sh:206:
+-c|--credential: QEMU_CREDENTIAL (yes) credential and security tokens are calculated according
WARNING: line over 80 characters
#41: FILE: scripts/qemu-binfmt-conf.sh:212:
+-s|--systemd: don't write into /proc, generate file(s) for
ERROR: line over 90 characters
#42: FILE: scripts/qemu-binfmt-conf.sh:213:
+ systemd-binfmt.service; environment variable HOST_ARCH
ERROR: line over 90 characters
#43: FILE: scripts/qemu-binfmt-conf.sh:214:
+ allows to override 'uname' to generate configuration files
WARNING: line over 80 characters
#44: FILE: scripts/qemu-binfmt-conf.sh:215:
+ for a different architecture than the current one.
ERROR: line over 90 characters
#45: FILE: scripts/qemu-binfmt-conf.sh:216:
+-d|--debian: don't write into /proc, generate update-binfmts templates
total: 5 errors, 2 warnings, 45 lines checked
Patch 9/10 has style problems, please review. If any of these errors are false positives report them to the maintainer, see CHECKPATCH in MAINTAINERS.
10/10 Checking commit d8be11fa4837 (qemu-binfmt-conf.sh: add --test|--dry-run)
WARNING: line over 80 characters
#20: FILE: scripts/qemu-binfmt-conf.sh:199:
+ if empty, configure/clear all known targets.
ERROR: line over 90 characters
#28: FILE: scripts/qemu-binfmt-conf.sh:211:
+-t|--test|--dry-run: QEMU_TEST (yes) test the setup with the provided arguments, but do not
ERROR: line over 90 characters
#58: FILE: scripts/qemu-binfmt-conf.sh:380:
+options=$(getopt -o tcdsQ:S:e:hcp -l test,dry-runclear,debian,systemd,path:,suffix:,exportdir:,help,credential,persistent -- "$@")
total: 2 errors, 1 warnings, 60 lines checked
Patch 10/10 has style problems, please review. If any of these errors are false positives report them to the maintainer, see CHECKPATCH in MAINTAINERS.
=== OUTPUT END ===
Test command exited with code: 1
The full log is available at
http://patchew.org/logs/20190311101428.GA11@765644dd90e5/testing.checkpatch/?type=message.
---
Email generated automatically by Patchew [http://patchew.org/].
Please send your feedback to [email protected]
Patchew URL: https://patchew.org/QEMU/20190311101428.GA11@765644dd90e5/
Patchew URL: https://patchew.org/QEMU/20190311101428.GA11@765644dd90e5/
Hi,
This series seems to have some coding style problems. See output below for more information:
Type: series
Message-id: 20190311101428.GA11@765644dd90e5
Subject: [Qemu-devel] [PATCH v4 0/10] qemu-binfmt-conf.sh
=== TEST SCRIPT BEGIN ===
#!/bin/bash
git rev-parse base > /dev/null || exit 0
git config --local diff.renamelimit 0
git config --local diff.renames True
git config --local diff.algorithm histogram./scripts/checkpatch.pl --mailback base..
=== TEST SCRIPT END ===
Updating 3c8cf5a9c21ff8782164d1def7f44bd888713384
From https://github.com/patchew-project/qemu
t [tag update] patchew/20190311101428.GA11@765644dd90e5 -> patchew/20190311101428.GA11@765644dd90e5
Switched to a new branch 'test'04f54aebb7 qemu-binfmt-conf.sh: add --test|--dry-runfd47672add qemu-binfmt-conf.sh: update usage()9a07973da4 qemu-binfmt-conf.sh: add option --clear1debedf8e2 qemu-binfmt-conf.sh: generalize CPU to positional TARGETS 89024f269c qemu-binfmt-conf.sh: honour QEMU_PATH and/or QEMU_SUFFIX 996793bc94 qemu-binfmt-conf.sh: remove 'qemu' prefix from cli options 8100c0cdfc qemu-binfmt-conf.sh: use the same presentation format as for qemu-* 0516d54354 qemu-binfmt-conf.sh: add QEMU_CREDENTIAL and QEMU_PERSISTENT a59a10b55f qemu-binfmt-conf.sh: make opts -p and -c boolean ae2b7e65b0 qemu-binfmt-conf.sh: enforce safe style consistency
=== OUTPUT BEGIN ===
1/10 Checking commit ae2b7e65b0a6 (qemu-binfmt-conf.sh: enforce safe style consistency)
WARNING: line over 80 characters
#53: FILE: scripts/qemu-binfmt-conf.sh:299:
+ if [ "x$magic" = "x" ] || [ "x$mask" = "x" ] || [ "x$family" = "x" ] ; then
total: 0 errors, 1 warnings, 47 lines checked
Patch 1/10 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
2/10 Checking commit a59a10b55f0d (qemu-binfmt-conf.sh: make opts -p and -c boolean)
ERROR: line over 90 characters
#51: FILE: scripts/qemu-binfmt-conf.sh:327:
+options=$(getopt -o ds:Q:S:e:hcp -l debian,systemd:,qemu-path:,qemu-suffix:,exportdir:,help,credential,persistent -- "$@")
total: 1 errors, 0 warnings, 43 lines checked
Patch 2/10 has style problems, please review. If any of these errors are false positives report them to the maintainer, see CHECKPATCH in MAINTAINERS.
3/10 Checking commit 0516d54354e5 (qemu-binfmt-conf.sh: add QEMU_CREDENTIAL and QEMU_PERSISTENT) 4/10 Checking commit 8100c0cdfc78 (qemu-binfmt-conf.sh: use the same presentation format as for qemu-*)
WARNING: line over 80 characters
#50: FILE: scripts/qemu-binfmt-conf.sh:179:
+-F|--qemu-suffix SUFFIX: add a suffix to the default interpreter name
ERROR: line over 90 characters
#51: FILE: scripts/qemu-binfmt-conf.sh:180:
+-d|--debian: don't write into /proc, generate update-binfmts templates
ERROR: line over 90 characters
#53: FILE: scripts/qemu-binfmt-conf.sh:182:
+ systemd-binfmt.service for the given CPU; if CPU is "ALL",
ERROR: line over 90 characters
#57: FILE: scripts/qemu-binfmt-conf.sh:186:
+-c|--credential: QEMU_CREDENTIAL (yes) credential and security tokens are calculated according
ERROR: line over 90 characters
#59: FILE: scripts/qemu-binfmt-conf.sh:188:
+-p|--persistent: QEMU_PERSISTENT (yes) load the interpreter and keep it in memory; all future
ERROR: line over 90 characters
#79: FILE: scripts/qemu-binfmt-conf.sh:201:
+The environment variable HOST_ARCH allows to override 'uname' to generate configuration files for a
total: 5 errors, 1 warnings, 74 lines checked
Patch 4/10 has style problems, please review. If any of these errors are false positives report them to the maintainer, see CHECKPATCH in MAINTAINERS.
5/10 Checking commit 996793bc9412 (qemu-binfmt-conf.sh: remove 'qemu' prefix from cli options)
WARNING: line over 80 characters
#36: FILE: scripts/qemu-binfmt-conf.sh:180:
+-F|--suffix SUFFIX: add a suffix to the default interpreter name
ERROR: line over 90 characters
#45: FILE: scripts/qemu-binfmt-conf.sh:328:
+options=$(getopt -o ds:Q:S:e:hcp -l debian,systemd:,path:,suffix:,exportdir:,help,credential,persistent -- "$@")
total: 1 errors, 1 warnings, 38 lines checked
Patch 5/10 has style problems, please review. If any of these errors are false positives report them to the maintainer, see CHECKPATCH in MAINTAINERS.
6/10 Checking commit 89024f269c12 (qemu-binfmt-conf.sh: honour QEMU_PATH and/or QEMU_SUFFIX)
WARNING: line over 80 characters
#23: FILE: scripts/qemu-binfmt-conf.sh:180:
+-F|--suffix SUFFIX: QEMU_SUFFIX add a suffix to the default interpreter name
total: 0 errors, 1 warnings, 23 lines checked
Patch 6/10 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
7/10 Checking commit 1debedf8e243 (qemu-binfmt-conf.sh: generalize CPU to positional TARGETS)
ERROR: line over 90 characters
#76: FILE: scripts/qemu-binfmt-conf.sh:198:
+TARGETS QEMU_TARGETS A single arch name or a list of them (see all names below);
WARNING: line over 80 characters
#86: FILE: scripts/qemu-binfmt-conf.sh:205:
+-s|--systemd: don't write into /proc, generate file(s) for
ERROR: line over 90 characters
#87: FILE: scripts/qemu-binfmt-conf.sh:206:
+ systemd-binfmt.service; environment variable HOST_ARCH
ERROR: line over 90 characters
#88: FILE: scripts/qemu-binfmt-conf.sh:207:
+ allows to override 'uname' to generate configuration files
WARNING: line over 80 characters
#89: FILE: scripts/qemu-binfmt-conf.sh:208:
+ for a different architecture than the current one.
ERROR: line over 90 characters
#139: FILE: scripts/qemu-binfmt-conf.sh:351:
+options=$(getopt -o dsQ:S:e:hcp -l debian,systemd,path:,suffix:,exportdir:,help,credential,persistent -- "$@")
total: 4 errors, 2 warnings, 135 lines checked
Patch 7/10 has style problems, please review. If any of these errors are false positives report them to the maintainer, see CHECKPATCH in MAINTAINERS.
8/10 Checking commit 9a07973da45d (qemu-binfmt-conf.sh: add option --clear)
WARNING: line over 80 characters
#33: FILE: scripts/qemu-binfmt-conf.sh:199:
+ if empty, configure/clear all known targets;
ERROR: line over 90 characters
#44: FILE: scripts/qemu-binfmt-conf.sh:211:
+-c|--clear: QEMU_CLEAR (yes) remove registered interpreters for target TARGETS;
WARNING: line over 80 characters
#69: FILE: scripts/qemu-binfmt-conf.sh:356:
+ find /proc/sys/fs/binfmt_misc/ -type f -name $names -exec sh -c 'printf %s -1 > {}' \;
ERROR: line over 90 characters
#82: FILE: scripts/qemu-binfmt-conf.sh:372:
+options=$(getopt -o cdsQ:S:e:hcp -l clear,debian,systemd,path:,suffix:,exportdir:,help,credential,persistent -- "$@")
total: 2 errors, 2 warnings, 76 lines checked
Patch 8/10 has style problems, please review. If any of these errors are false positives report them to the maintainer, see CHECKPATCH in MAINTAINERS.
9/10 Checking commit fd47672add95 (qemu-binfmt-conf.sh: update usage())
ERROR: line over 90 characters
#29: FILE: scripts/qemu-binfmt-conf.sh:204:
+-p|--persistent: QEMU_PERSISTENT (yes) load the interpreter and keep it in memory; all future
ERROR: line over 90 characters
#31: FILE: scripts/qemu-binfmt-conf.sh:206:
+-c|--credential: QEMU_CREDENTIAL (yes) credential and security tokens are calculated according
WARNING: line over 80 characters
#41: FILE: scripts/qemu-binfmt-conf.sh:212:
+-s|--systemd: don't write into /proc, generate file(s) for
ERROR: line over 90 characters
#42: FILE: scripts/qemu-binfmt-conf.sh:213:
+ systemd-binfmt.service; environment variable HOST_ARCH
ERROR: line over 90 characters
#43: FILE: scripts/qemu-binfmt-conf.sh:214:
+ allows to override 'uname' to generate configuration files
WARNING: line over 80 characters
#44: FILE: scripts/qemu-binfmt-conf.sh:215:
+ for a different architecture than the current one.
ERROR: line over 90 characters
#45: FILE: scripts/qemu-binfmt-conf.sh:216:
+-d|--debian: don't write into /proc, generate update-binfmts templates
total: 5 errors, 2 warnings, 45 lines checked
Patch 9/10 has style problems, please review. If any of these errors are false positives report them to the maintainer, see CHECKPATCH in MAINTAINERS.
10/10 Checking commit 04f54aebb77d (qemu-binfmt-conf.sh: add --test|--dry-run)
WARNING: line over 80 characters
#20: FILE: scripts/qemu-binfmt-conf.sh:199:
+ if empty, configure/clear all known targets.
ERROR: line over 90 characters
#28: FILE: scripts/qemu-binfmt-conf.sh:211:
+-t|--test|--dry-run: QEMU_TEST (yes) test the setup with the provided arguments, but do not
ERROR: line over 90 characters
#58: FILE: scripts/qemu-binfmt-conf.sh:380:
+options=$(getopt -o tcdsQ:S:e:hcp -l test,dry-runclear,debian,systemd,path:,suffix:,exportdir:,help,credential,persistent -- "$@")
total: 2 errors, 1 warnings, 60 lines checked
Patch 10/10 has style problems, please review. If any of these errors are false positives report them to the maintainer, see CHECKPATCH in MAINTAINERS.
=== OUTPUT END ===
Test command exited with code: 1
The full log is available at
http://patchew.org/logs/20190311101428.GA11@765644dd90e5/testing.checkpatch/?type=message.
---
Email generated automatically by Patchew [http://patchew.org/].
Please send your feedback to [email protected]