arm64: dts: meson-gxl-s905d-phicomm-n1: add status LED
Subsystems (2)
PATCH 1/1 arm64: dts: meson-gxl-s905d-phicomm-n1: add status LED
There is a white LED on the front panel behind the logo and the manufacturer uses that LED to indicate network and USB drive status.
--- .../boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts | 10 ++++++++++ 1 file changed, 10 insertions(+)
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts +10 -0
@@ -14,6 +14,16 @@ cvbs-connector { status = "disabled"; }; + + leds { + compatible = "gpio-leds"; + + status { + label = "n1:white:status"; + gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; }; &cvbs_vdac_port {
Signature · 1 line
2.20.1
Hi Chuanhong,
Quoted 20 lines · Chuanhong Guo
There is a white LED on the front panel behind the logo and the manufacturer uses that LED to indicate network and USB drive status.
Signed-off-by Chuanhong Guo <[email protected]>--- .../boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts | 10 ++++++++++ 1 file changed, 10 insertions(+)arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts +3
-0@@ -14,6 +14,16 @@ cvbs-connector { status = "disabled"; }; + + leds { + compatible = "gpio-leds";
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts line 29
Quoted 10 lines
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts +7
-0+ + status { + label = "n1:white:status"; + gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; }; &cvbs_vdac_port {
BTW, do you know if it's possible to have a sample of the Phicomm N1 in order to be added in kernelci ?
Neil
Hi!
Quoted 3 lines · Neil Armstrong
[...]
BTW, do you know if it's possible to have a sample of the Phicomm N1 in order to be added in kernelci ?
It's easy to purchase one in China and second-handed ones are dirt cheap, but I don't think it's available worldwide.
I'm not familiar with world-wide shipping or exporting stuff so I can't help much here.
Quoted 2 lines
Neil
Quoted 31 lines · Neil Armstrong
Hi Chuanhong,
Quoted 28 lines · Chuanhong Guo
There is a white LED on the front panel behind the logo and the manufacturer uses that LED to indicate network and USB drive status.
Signed-off-by Chuanhong Guo <[email protected]>--- .../boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts | 10 ++++++++++ 1 file changed, 10 insertions(+)arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts +10
-0@@ -14,6 +14,16 @@ cvbs-connector { status = "disabled"; }; + + leds { + compatible = "gpio-leds"; + + status { + label = "n1:white:status"; + gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; };
Quoted 4 lines
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts line 29
Quoted 2 lines
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts +0
-0&cvbs_vdac_port {Reviewed-by Neil Armstrong <[email protected]>
Queued for v5.2 with Neil's tag (branch: v5.2/dt64)
Kevin