package/ecryptfs-utils: Add support without gettext
PATCH 1/1 package/ecryptfs-utils: Add support without gettext
Add custom ecryptfs-common script which provides gettext wrapper as function which checks at runtime if there is gettext tool, if no - the "echo" will be used instead. Each script which uses gettext is patched with including this ecryptfs-common script.
The patch for ecryptfs-utils only inserts hard-coded (w/o using @prefix@/lib/@PACKAGE@ variables) path to the ecryptfs-common, it is very small and trivial, it allows to easy support new bumped version.
gettext package is now selected automatically only if NLS is enabled.
--- ...cho-instead-of-gettext-if-it-does-not-exi.patch | 117 +++++++++++++++++++++ package/ecryptfs-utils/Config.in | 2 +- package/ecryptfs-utils/ecryptfs-common | 33 ++++++ package/ecryptfs-utils/ecryptfs-utils.mk | 6 ++ 4 files changed, 157 insertions(+), 1 deletion(-) create mode 100644 package/ecryptfs-utils/0003-utils-Use-echo-instead-of-gettext-if-it-does-not-exi.patch create mode 100755 package/ecryptfs-utils/ecryptfs-common
package/ecryptfs-utils/0003-utils-Use-echo-instead-of-gettext-if-it-does-not-exi.patch new file +117 -0
@@ -0,0 +1,117 @@ +From 55755006370fb12167dcadeb084b6645712197a9 Mon Sep 17 00:00:00 2001 +From: Vadim Kochan <[email protected]> +Date: Tue, 12 Mar 2019 02:15:33 +0200 +Subject: [PATCH] utils: Use "echo" instead of gettext if it does not exist + +There might be a case when gettext does not exist on the system, +so use just "echo" instead. Added gettext wrapper which imitates +gettext behaviour, wrapper is used only if gettext is not found +by "which". ecryptfs-common is included by each script which uses +gettext tool. + +Signed-off-by: Vadim Kochan <[email protected]> +--- + src/utils/ecryptfs-migrate-home | 2 ++ + src/utils/ecryptfs-mount-private | 2 ++ + src/utils/ecryptfs-rewrite-file | 2 ++ + src/utils/ecryptfs-setup-private | 3 +++ + src/utils/ecryptfs-setup-swap | 2 ++ + src/utils/ecryptfs-umount-private | 2 ++ + src/utils/ecryptfs-verify | 2 ++ + 7 files changed, 15 insertions(+) + +diff --git a/src/utils/ecryptfs-migrate-home b/src/utils/ecryptfs-migrate-home +index b810146..4fa4d86 100755 +--- a/src/utils/ecryptfs-migrate-home ++++ b/src/utils/ecryptfs-migrate-home +@@ -24,6 +24,8 @@ + + set -e + ++. /usr/lib/ecryptfs-utils/ecryptfs-common ++ + PRIVATE_DIR="Private" + + usage() { +diff --git a/src/utils/ecryptfs-mount-private b/src/utils/ecryptfs-mount-private +index c32708f..a6df39f 100755 +--- a/src/utils/ecryptfs-mount-private ++++ b/src/utils/ecryptfs-mount-private +@@ -12,6 +12,8 @@ + # * inserts the mount passphrase into the keyring + # * and mounts a user's encrypted private folder + ++. /usr/lib/ecryptfs-utils/ecryptfs-common ++ + PRIVATE_DIR="Private" + WRAPPING_PASS="LOGIN" + PW_ATTEMPTS=3 +diff --git a/src/utils/ecryptfs-rewrite-file b/src/utils/ecryptfs-rewrite-file +index c4f67f5..146e385 100755 +--- a/src/utils/ecryptfs-rewrite-file ++++ b/src/utils/ecryptfs-rewrite-file +@@ -17,6 +17,8 @@ + # You should have received a copy of the GNU General Public License + # along with this program. If not, see <http://www.gnu.org/licenses/>. + ++. /usr/lib/ecryptfs-utils/ecryptfs-common ++ + TEXTDOMAIN="ecryptfs-utils" + + error() { +diff --git a/src/utils/ecryptfs-setup-private b/src/utils/ecryptfs-setup-private +index e90d1d0..ca08656 100755 +--- a/src/utils/ecryptfs-setup-private ++++ b/src/utils/ecryptfs-setup-private +@@ -6,6 +6,9 @@ + # Ported for use on Ubuntu by Dustin Kirkland <[email protected]> + # Copyright (C) 2008 Canonical Ltd. + # Copyright (C) 2007-2008 International Business Machines ++ ++. /usr/lib/ecryptfs-utils/ecryptfs-common ++ + PRIVATE_DIR="Private" + WRAPPING_PASS="LOGIN" + ECRYPTFS_DIR="/home/.ecryptfs" +diff --git a/src/utils/ecryptfs-setup-swap b/src/utils/ecryptfs-setup-swap +index 41cf18a..157b0c5 100755 +--- a/src/utils/ecryptfs-setup-swap ++++ b/src/utils/ecryptfs-setup-swap +@@ -19,6 +19,8 @@ + # The cryptswap setup used here follows a guide published at: + # * http://ubuntumagnet.com/2007/11/creating-encrypted-swap-file-ubuntu-using-cryptsetup + ++. /usr/lib/ecryptfs-utils/ecryptfs-common ++ + TEXTDOMAIN="ecryptfs-utils" + + error() { +diff --git a/src/utils/ecryptfs-umount-private b/src/utils/ecryptfs-umount-private +index 27edeaa..4ac0ced 100755 +--- a/src/utils/ecryptfs-umount-private ++++ b/src/utils/ecryptfs-umount-private +@@ -5,6 +5,8 @@ + # Original by Michael Halcrow, IBM + # Extracted to a stand-alone script by Dustin Kirkland <[email protected]> + ++. /usr/lib/ecryptfs-utils/ecryptfs-common ++ + TEXTDOMAIN="ecryptfs-utils" + + if grep -qs "$HOME/.Private $PWD ecryptfs " /proc/mounts 2>/dev/null; then +diff --git a/src/utils/ecryptfs-verify b/src/utils/ecryptfs-verify +index b55641d..3592d83 100755 +--- a/src/utils/ecryptfs-verify ++++ b/src/utils/ecryptfs-verify +@@ -16,6 +16,8 @@ + # You should have received a copy of the GNU General Public License + # along with this program. If not, see <http://www.gnu.org/licenses/>. + ++. /usr/lib/ecryptfs-utils/ecryptfs-common ++ + error() { + echo `gettext "ERROR:"` "$@" 1>&2 + echo `gettext "ERROR:"` "Configuration invalid" 1>&2 +-- +2.14.1 +
package/ecryptfs-utils/Config.in +1 -1
@@ -12,7 +12,7 @@ config BR2_PACKAGE_ECRYPTFS_UTILS select BR2_PACKAGE_LIBNSS # runtime dependency only, some scripts are using the # 'gettext' program to get translations - select BR2_PACKAGE_GETTEXT + select BR2_PACKAGE_GETTEXT if BR2_SYSTEM_ENABLE_NLS # runtime dependency only select BR2_PACKAGE_GETENT help
package/ecryptfs-utils/ecryptfs-common new file +33 -0
@@ -0,0 +1,33 @@ +GETTEXT_PROG="" + +# Thanks to "Yann E. MORIN" <[email protected]> +# for this gettext replacement function +gettext_echo() { + while [ ${#} -ne 0 ]; do + case "${1}" in + (-h) echo "no help"; exit 0;; + (-V) echo "0.0.0"; exit 0;; + (-d|--domain) shift 2;; + (-d*|--domain=*) shift 1;; + (-e|-E|-n) shift 1;; + (-s) shift 1;; # Ignore? + (*) break;; + esac + done + case ${#} in + (0) ;; + (1) echo "${1}";; # No TEXTDOMAIN? + (*) shift; echo "${@}";; # Ignore TEXTDOMAIN? + esac +} + +gettext() { + if [ -z "${GETTEXT_PROG}" ]; then + GETTEXT_PROG=$(which gettext) + if [ $? != 0 ]; then + GETTEXT_PROG=gettext_echo + fi + fi + + ${GETTEXT_PROG} "$@" +}
package/ecryptfs-utils/ecryptfs-utils.mk +6 -0
@@ -25,4 +25,10 @@ else ECRYPTFS_UTILS_CONF_OPTS += --disable-openssl endif +define ECRYPTFS_UTILS_INSTALL_COMMON_SCRIPT + $(INSTALL) -D -m 0755 $(ECRYPTFS_UTILS_PKGDIR)/ecryptfs-common \ + $(TARGET_DIR)/usr/lib/ecryptfs-utils/ecryptfs-common +endef +ECRYPTFS_UTILS_POST_INSTALL_TARGET_HOOKS += ECRYPTFS_UTILS_INSTALL_COMMON_SCRIPT + $(eval $(autotools-package))
Signature · 1 line
2.14.1
PATCH 1/1 package/ecryptfs-utils: Add support without gettext
Hello Vadim,
Quoted 12 lines · On Wed, 13 Mar 2019 00:20:35 +0200 Vadim Kochan <[email protected]> wrote:
Add custom ecryptfs-common script which provides gettext wrapper as function which checks at runtime if there is gettext tool, if no - the "echo" will be used instead. Each script which uses gettext is patched with including this ecryptfs-common script.
The patch for ecryptfs-utils only inserts hard-coded (w/o using @prefix@/lib/@PACKAGE@ variables) path to the ecryptfs-common, it is very small and trivial, it allows to easy support new bumped version.
gettext package is now selected automatically only if NLS is enabled.
Signed-off-by Vadim Kochan <[email protected]>
Quoted 8 lines
--- ...cho-instead-of-gettext-if-it-does-not-exi.patch | 117 +++++++++++++++++++++ package/ecryptfs-utils/Config.in | 2 +- package/ecryptfs-utils/ecryptfs-common | 33 ++++++ package/ecryptfs-utils/ecryptfs-utils.mk | 6 ++ 4 files changed, 157 insertions(+), 1 deletion(-) create mode 100644 package/ecryptfs-utils/0003-utils-Use-echo-instead-of-gettext-if-it-does-not-exi.patch create mode 100755 package/ecryptfs-utils/ecryptfs-common
Thanks for this proposal. I would actually perfer if ecryptfs-common was part of the ecryptfs-utils patch, and this patch be submitted upstream.
Thanks!
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
PATCH 1/1 package/ecryptfs-utils: Add support without gettext
Hi Thomas,
Quoted 26 lines · Thomas Petazzoni
Hello Vadim,
Quoted 12 lines · On Wed, 13 Mar 2019 00:20:35 +0200 Vadim Kochan <[email protected]> wrote:
Add custom ecryptfs-common script which provides gettext wrapper as function which checks at runtime if there is gettext tool, if no - the "echo" will be used instead. Each script which uses gettext is patched with including this ecryptfs-common script.
The patch for ecryptfs-utils only inserts hard-coded (w/o using @prefix@/lib/@PACKAGE@ variables) path to the ecryptfs-common, it is very small and trivial, it allows to easy support new bumped version.
gettext package is now selected automatically only if NLS is enabled.
Signed-off-by Vadim Kochan <[email protected]>Quoted 8 lines
--- ...cho-instead-of-gettext-if-it-does-not-exi.patch | 117 +++++++++++++++++++++ package/ecryptfs-utils/Config.in | 2 +- package/ecryptfs-utils/ecryptfs-common | 33 ++++++ package/ecryptfs-utils/ecryptfs-utils.mk | 6 ++ 4 files changed, 157 insertions(+), 1 deletion(-) create mode 100644 package/ecryptfs-utils/0003-utils-Use-echo-instead-of-gettext-if-it-does-not-exi.patch create mode 100755 package/ecryptfs-utils/ecryptfs-common
Quoted 4 lines
Thanks for this proposal. I would actually perfer if ecryptfs-common was part of the ecryptfs-utils patch, and this patch be submitted upstream.
Me too, but it requires more work like converting these scripts to *.in form to be processed by configure because in that case it is better to use conf variables like:
. @prefix@/lib/@PACKAGE@
and I am not sure if upstream community would prefer this), but while having temporary easy solution (provided by this patch) I can work on official patch in parellel.
My worries related to point that in case upstream will not accept the better-for-official version it will make harder to maintain such patch when new ecryptfs-utils version is bumped.
Regards,
Vadim Kochan
PATCH 1/1 package/ecryptfs-utils: Add support without gettext
In reply to Vadim KochanVadim, All,
On 2019-03-13 00:20 +0200, Vadim Kochan spake thusly:
Quoted 163 lines
Add custom ecryptfs-common script which provides gettext wrapper as function which checks at runtime if there is gettext tool, if no - the "echo" will be used instead. Each script which uses gettext is patched with including this ecryptfs-common script.
The patch for ecryptfs-utils only inserts hard-coded (w/o using @prefix@/lib/@PACKAGE@ variables) path to the ecryptfs-common, it is very small and trivial, it allows to easy support new bumped version.
gettext package is now selected automatically only if NLS is enabled.
Signed-off-by Vadim Kochan <[email protected]>--- ...cho-instead-of-gettext-if-it-does-not-exi.patch | 117 +++++++++++++++++++++ package/ecryptfs-utils/Config.in | 2 +- package/ecryptfs-utils/ecryptfs-common | 33 ++++++ package/ecryptfs-utils/ecryptfs-utils.mk | 6 ++ 4 files changed, 157 insertions(+), 1 deletion(-) create mode 100644 package/ecryptfs-utils/0003-utils-Use-echo-instead-of-gettext-if-it-does-not-exi.patch create mode 100755 package/ecryptfs-utils/ecryptfs-commonpackage/ecryptfs-utils/0003-utils-Use-echo-instead-of-gettext-if-it-does-not-exi.patch new file +117
-0@@ -0,0 +1,117 @@ +From 55755006370fb12167dcadeb084b6645712197a9 Mon Sep 17 00:00:00 2001 +From: Vadim Kochan <[email protected]> +Date: Tue, 12 Mar 2019 02:15:33 +0200 +Subject: [PATCH] utils: Use "echo" instead of gettext if it does not exist + +There might be a case when gettext does not exist on the system, +so use just "echo" instead. Added gettext wrapper which imitates +gettext behaviour, wrapper is used only if gettext is not found +by "which". ecryptfs-common is included by each script which uses +gettext tool. + +Signed-off-by: Vadim Kochan <[email protected]> +--- + src/utils/ecryptfs-migrate-home | 2 ++ + src/utils/ecryptfs-mount-private | 2 ++ + src/utils/ecryptfs-rewrite-file | 2 ++ + src/utils/ecryptfs-setup-private | 3 +++ + src/utils/ecryptfs-setup-swap | 2 ++ + src/utils/ecryptfs-umount-private | 2 ++ + src/utils/ecryptfs-verify | 2 ++ + 7 files changed, 15 insertions(+) + +diff --git a/src/utils/ecryptfs-migrate-home b/src/utils/ecryptfs-migrate-home +index b810146..4fa4d86 100755 +--- a/src/utils/ecryptfs-migrate-home ++++ b/src/utils/ecryptfs-migrate-home +@@ -24,6 +24,8 @@ + + set -e + ++. /usr/lib/ecryptfs-utils/ecryptfs-common ++ + PRIVATE_DIR="Private" + + usage() { +diff --git a/src/utils/ecryptfs-mount-private b/src/utils/ecryptfs-mount-private +index c32708f..a6df39f 100755 +--- a/src/utils/ecryptfs-mount-private ++++ b/src/utils/ecryptfs-mount-private +@@ -12,6 +12,8 @@ + # * inserts the mount passphrase into the keyring + # * and mounts a user's encrypted private folder + ++. /usr/lib/ecryptfs-utils/ecryptfs-common ++ + PRIVATE_DIR="Private" + WRAPPING_PASS="LOGIN" + PW_ATTEMPTS=3 +diff --git a/src/utils/ecryptfs-rewrite-file b/src/utils/ecryptfs-rewrite-file +index c4f67f5..146e385 100755 +--- a/src/utils/ecryptfs-rewrite-file ++++ b/src/utils/ecryptfs-rewrite-file +@@ -17,6 +17,8 @@ + # You should have received a copy of the GNU General Public License + # along with this program. If not, see <http://www.gnu.org/licenses/>. + ++. /usr/lib/ecryptfs-utils/ecryptfs-common ++ + TEXTDOMAIN="ecryptfs-utils" + + error() { +diff --git a/src/utils/ecryptfs-setup-private b/src/utils/ecryptfs-setup-private +index e90d1d0..ca08656 100755 +--- a/src/utils/ecryptfs-setup-private ++++ b/src/utils/ecryptfs-setup-private +@@ -6,6 +6,9 @@ + # Ported for use on Ubuntu by Dustin Kirkland <[email protected]> + # Copyright (C) 2008 Canonical Ltd. + # Copyright (C) 2007-2008 International Business Machines ++ ++. /usr/lib/ecryptfs-utils/ecryptfs-common ++ + PRIVATE_DIR="Private" + WRAPPING_PASS="LOGIN" + ECRYPTFS_DIR="/home/.ecryptfs" +diff --git a/src/utils/ecryptfs-setup-swap b/src/utils/ecryptfs-setup-swap +index 41cf18a..157b0c5 100755 +--- a/src/utils/ecryptfs-setup-swap ++++ b/src/utils/ecryptfs-setup-swap +@@ -19,6 +19,8 @@ + # The cryptswap setup used here follows a guide published at: + # * http://ubuntumagnet.com/2007/11/creating-encrypted-swap-file-ubuntu-using-cryptsetup + ++. /usr/lib/ecryptfs-utils/ecryptfs-common ++ + TEXTDOMAIN="ecryptfs-utils" + + error() { +diff --git a/src/utils/ecryptfs-umount-private b/src/utils/ecryptfs-umount-private +index 27edeaa..4ac0ced 100755 +--- a/src/utils/ecryptfs-umount-private ++++ b/src/utils/ecryptfs-umount-private +@@ -5,6 +5,8 @@ + # Original by Michael Halcrow, IBM + # Extracted to a stand-alone script by Dustin Kirkland <[email protected]> + ++. /usr/lib/ecryptfs-utils/ecryptfs-common ++ + TEXTDOMAIN="ecryptfs-utils" + + if grep -qs "$HOME/.Private $PWD ecryptfs " /proc/mounts 2>/dev/null; then +diff --git a/src/utils/ecryptfs-verify b/src/utils/ecryptfs-verify +index b55641d..3592d83 100755 +--- a/src/utils/ecryptfs-verify ++++ b/src/utils/ecryptfs-verify +@@ -16,6 +16,8 @@ + # You should have received a copy of the GNU General Public License + # along with this program. If not, see <http://www.gnu.org/licenses/>. + ++. /usr/lib/ecryptfs-utils/ecryptfs-common ++ + error() { + echo `gettext "ERROR:"` "$@" 1>&2 + echo `gettext "ERROR:"` "Configuration invalid" 1>&2 +-- +2.14.1 +package/ecryptfs-utils/Config.in +1
-1@@ -12,7 +12,7 @@ config BR2_PACKAGE_ECRYPTFS_UTILS select BR2_PACKAGE_LIBNSS # runtime dependency only, some scripts are using the # 'gettext' program to get translations - select BR2_PACKAGE_GETTEXT + select BR2_PACKAGE_GETTEXT if BR2_SYSTEM_ENABLE_NLS # runtime dependency only select BR2_PACKAGE_GETENT helppackage/ecryptfs-utils/ecryptfs-common new file +0
-0
package/ecryptfs-utils/ecryptfs-common line 9
Quoted 9 lines
package/ecryptfs-utils/ecryptfs-common new file +9
-0@@ -0,0 +1,33 @@ +GETTEXT_PROG="" + +# Thanks to "Yann E. MORIN" <[email protected]> +# for this gettext replacement function +gettext_echo() { + while [ ${#} -ne 0 ]; do + case "${1}" in + (-h) echo "no help"; exit 0;; + (-V) echo "0.0.0"; exit 0;;
Since this is a function, you probably want to return rather than exit.
Also, we usually use leading spaces in shell scripts, not TABs.
Quoted 8 lines
package/ecryptfs-utils/ecryptfs-common new file +8
-0+ (-d|--domain) shift 2;; + (-d*|--domain=*) shift 1;; + (-e|-E|-n) shift 1;; + (-s) shift 1;; # Ignore? + (*) break;; + esac + done + case ${#} in
package/ecryptfs-utils/ecryptfs-common line 27
Quoted 10 lines
package/ecryptfs-utils/ecryptfs-common new file +10
-0+ (0) ;; + (1) echo "${1}";; # No TEXTDOMAIN? + (*) shift; echo "${@}";; # Ignore TEXTDOMAIN? + esac +} + +gettext() { + if [ -z "${GETTEXT_PROG}" ]; then + GETTEXT_PROG=$(which gettext) + if [ $? != 0 ]; then
!= is a string comparison. For numbers, you will want to use -ne (or -eq), see below.
package/ecryptfs-utils/ecryptfs-common line 33
Quoted 6 lines
package/ecryptfs-utils/ecryptfs-common new file +6
-0+ GETTEXT_PROG=gettext_echo + fi + fi + + ${GETTEXT_PROG} "$@" +}
This means that a script that calls gettext more than once will actually try to resolve it each time. This is not optimum.
Instead, I think ecryptfs-common should basically look something like:
if ! which gettext >/dev/null 2>&1; then
gettext() {
if [ -n "${GETTEXT}" ]; then
# Weird construct so that script that are 'set -e'
# fail at the call site of gettext and not here.
"${GETTEXT}" "${@}" || return $?
return 0
fi
while [ ${#} -ne 0 ]; do
case "${1}" in
(-h) printf "no help\n"; return 0;;
(-V) printf "0.0.0\n"; return 0;;
(-d|--domain) shift 2;;
(-d*|--domain=*) shift 1;;
(-e|-E|-n) shift 1;;
(-s) shift 1;; # Ignore?
(-*) printf "invalid option '%s'\n" "${1}" >&2; return 1;;
(*) break;;
esac
done
case ${#} in
(0) printf "missing arguments\n" >&2; return 1;;
(1) printf "%s" "${1}";;
(2) shift; printf "%s" "${2}";;
(*) printf "too many arguments\n" >&2; return 1;;
esac
}
fiI.e. if there is no gettext program, you define a function named gettext.
Regards,
Yann E. MORIN.
Quoted 18 lines
package/ecryptfs-utils/ecryptfs-utils.mk +6
-0@@ -25,4 +25,10 @@ else ECRYPTFS_UTILS_CONF_OPTS += --disable-openssl endif +define ECRYPTFS_UTILS_INSTALL_COMMON_SCRIPT + $(INSTALL) -D -m 0755 $(ECRYPTFS_UTILS_PKGDIR)/ecryptfs-common \ + $(TARGET_DIR)/usr/lib/ecryptfs-utils/ecryptfs-common +endef +ECRYPTFS_UTILS_POST_INSTALL_TARGET_HOOKS += ECRYPTFS_UTILS_INSTALL_COMMON_SCRIPT + $(eval $(autotools-package))Signature · 1 line
2.14.1
Signature · 6 lines
.-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------'
PATCH 1/1 package/ecryptfs-utils: Add support without gettext
Hi Yann,
Quoted 15 lines · Yann E. MORIN
Vadim, All,
On 2019-03-13 00:20 +0200, Vadim Kochan spake thusly:
Quoted 12 lines
Add custom ecryptfs-common script which provides gettext wrapper as function which checks at runtime if there is gettext tool, if no - the "echo" will be used instead. Each script which uses gettext is patched with including this ecryptfs-common script.
The patch for ecryptfs-utils only inserts hard-coded (w/o using @prefix@/lib/@PACKAGE@ variables) path to the ecryptfs-common, it is very small and trivial, it allows to easy support new bumped version.
gettext package is now selected automatically only if NLS is enabled.
Signed-off-by Vadim Kochan <[email protected]>
[cut]
Quoted 36 lines
package/ecryptfs-utils/ecryptfs-common line 9
Quoted 9 lines
package/ecryptfs-utils/ecryptfs-common new file +9
-0+GETTEXT_PROG="" + +# Thanks to "Yann E. MORIN" <[email protected]> +# for this gettext replacement function +gettext_echo() { + while [ ${#} -ne 0 ]; do + case "${1}" in + (-h) echo "no help"; exit 0;; + (-V) echo "0.0.0"; exit 0;;Since this is a function, you probably want to return rather than exit.
Also, we usually use leading spaces in shell scripts, not TABs.
Quoted 8 lines
package/ecryptfs-utils/ecryptfs-common new file +8
-0+ (-d|--domain) shift 2;; + (-d*|--domain=*) shift 1;; + (-e|-E|-n) shift 1;; + (-s) shift 1;; # Ignore? + (*) break;; + esac + done + case ${#} inpackage/ecryptfs-utils/ecryptfs-common line 27
Quoted 10 lines
package/ecryptfs-utils/ecryptfs-common new file +10
-0+ (0) ;; + (1) echo "${1}";; # No TEXTDOMAIN? + (*) shift; echo "${@}";; # Ignore TEXTDOMAIN? + esac +} + +gettext() { + if [ -z "${GETTEXT_PROG}" ]; then + GETTEXT_PROG=$(which gettext) + if [ $? != 0 ]; then!= is a string comparison. For numbers, you will want to use -ne (or -eq), see below.
Quoted 9 lines
package/ecryptfs-utils/ecryptfs-common line 33
Quoted 6 lines
package/ecryptfs-utils/ecryptfs-common new file +6
-0+ GETTEXT_PROG=gettext_echo + fi + fi + + ${GETTEXT_PROG} "$@" +}This means that a script that calls gettext more than once will actually try to resolve it each time. This is not optimum.
But I check the GETTEXT_PROG variable on the start, if it is not empty then just:
${GETTEXT_PROG} "$@"Quoted 46 lines
Instead, I think ecryptfs-common should basically look something like:
if ! which gettext >/dev/null 2>&1; then gettext() { if [ -n "${GETTEXT}" ]; then # Weird construct so that script that are 'set -e' # fail at the call site of gettext and not here. "${GETTEXT}" "${@}" || return $? return 0 fi while [ ${#} -ne 0 ]; do case "${1}" in (-h) printf "no help\n"; return 0;; (-V) printf "0.0.0\n"; return 0;; (-d|--domain) shift 2;; (-d*|--domain=*) shift 1;; (-e|-E|-n) shift 1;; (-s) shift 1;; # Ignore? (-*) printf "invalid option '%s'\n" "${1}" >&2; return 1;; (*) break;; esac done case ${#} in (0) printf "missing arguments\n" >&2; return 1;; (1) printf "%s" "${1}";; (2) shift; printf "%s" "${2}";; (*) printf "too many arguments\n" >&2; return 1;; esac } fiI.e. if there is no gettext program, you define a function named gettext.
Regards,
Yann E. MORIN.Quoted 8 lines
package/ecryptfs-utils/ecryptfs-utils.mk +0
-0@@ -25,4 +25,10 @@ else ECRYPTFS_UTILS_CONF_OPTS += --disable-openssl endif
Quoted 11 lines
Quoted 10 lines
package/ecryptfs-utils/ecryptfs-utils.mk +6
-0+define ECRYPTFS_UTILS_INSTALL_COMMON_SCRIPT + $(INSTALL) -D -m 0755 $(ECRYPTFS_UTILS_PKGDIR)/ecryptfs-common \ + $(TARGET_DIR)/usr/lib/ecryptfs-utils/ecryptfs-common +endef +ECRYPTFS_UTILS_POST_INSTALL_TARGET_HOOKS += ECRYPTFS_UTILS_INSTALL_COMMON_SCRIPT + $(eval $(autotools-package))Signature · 1 line
2.14.1
Thanks for your comments, anyway conceptually this patch is wrong. I tried to do it in the right way - install ecryptfs-common from ecryptfs-utils in src/utils/Makefile.am, but faced with autoreconf issue (autoreconf is required because src/utils/Makefile.am is changed by patch which adds installation of ecryptfs-common), but autoreconf fails to regenerate needed files because it removes aclocal.m4 which has definition of AM_GLIB_GNU_GETTEXT macro (which is not defined by host-gettext nowhere in output/host) but this macro is required by configure.ac. So, I am not sure I can provide conceptually better patch for now (but Yann's comments), may be it is possible to regenerate only src/utils/Makefile.in (from *.am file) instead of calling autoreconf for all *.am, *.ac files.
Regards,
Vadim Kochan
PATCH 1/1 package/ecryptfs-utils: Add support without gettext
Vadim, All,
On 2019-03-13 21:15 +0200, Vadym Kochan spake thusly:
Quoted 2 lines · Yann E. MORIN
Quoted 1 line
On 2019-03-13 00:20 +0200, Vadim Kochan spake thusly:
[--SNIP--]
Quoted 18 lines
Quoted 8 lines
package/ecryptfs-utils/ecryptfs-common line 27
Quoted 4 lines
package/ecryptfs-utils/ecryptfs-common new file +4
-0+gettext() { + if [ -z "${GETTEXT_PROG}" ]; then + GETTEXT_PROG=$(which gettext) + if [ $? != 0 ]; then!= is a string comparison. For numbers, you will want to use -ne (or -eq), see below.
Quoted 9 lines
package/ecryptfs-utils/ecryptfs-common line 33
Quoted 6 lines
package/ecryptfs-utils/ecryptfs-common new file +6
-0+ GETTEXT_PROG=gettext_echo + fi + fi + + ${GETTEXT_PROG} "$@" +}This means that a script that calls gettext more than once will actually try to resolve it each time. This is not optimum.
Quoted 2 lines
But I check the
GETTEXT_PROGvariable on the start, if it is not empty then just:${GETTEXT_PROG} "$@"
Hmm... Right, and the resolution is indeed done only once. My bad.
Quoted 31 lines
Quoted 31 lines
Instead, I think ecryptfs-common should basically look something like:
if ! which gettext >/dev/null 2>&1; then gettext() { if [ -n "${GETTEXT}" ]; then # Weird construct so that script that are 'set -e' # fail at the call site of gettext and not here. "${GETTEXT}" "${@}" || return $? return 0 fi while [ ${#} -ne 0 ]; do case "${1}" in (-h) printf "no help\n"; return 0;; (-V) printf "0.0.0\n"; return 0;; (-d|--domain) shift 2;; (-d*|--domain=*) shift 1;; (-e|-E|-n) shift 1;; (-s) shift 1;; # Ignore? (-*) printf "invalid option '%s'\n" "${1}" >&2; return 1;; (*) break;; esac done case ${#} in (0) printf "missing arguments\n" >&2; return 1;; (1) printf "%s" "${1}";; (2) shift; printf "%s" "${2}";; (*) printf "too many arguments\n" >&2; return 1;; esac } fi
Quoted 2 lines
Quoted 2 lines
I.e. if there is no gettext program, you define a function named gettext.
The difference then between your code and mine, is that yours is doing a lazy resolution (i.e. resolving at first call) while mine is doing an early resolution (i.e. resolving when parsing).
Additionally, since your code is using a two-level function call (gettext -> gettext_echo), it's a bit more complex to handle scritps that are 'set -e' and ensure they get the error at the call site rather than in internal details of the emulating function.
But my suggestion would be that we just provide a gettext wrapper script (not function) when gettext is not installed. This is much simpler because there is thus no need to patch upstream.
Quoted 7 lines
Thanks for your comments, anyway conceptually this patch is wrong. I tried to do it in the right way - install ecryptfs-common from ecryptfs-utils in src/utils/Makefile.am, but faced with autoreconf issue (autoreconf is required because src/utils/Makefile.am is changed by patch which adds installation of ecryptfs-common), but autoreconf fails to regenerate needed files because it removes aclocal.m4 which has definition of
AM_GLIB_GNU_GETTEXTmacro (which is not defined by host-gettext
Dang, indeed it is a big hammer to add a dependency onto host-libglib2 just for this oe macro, which by the way is deprecated, and that upstream suggests to remove in favour of the official gettext one:
https://gitlab.gnome.org/GNOME/glib/blob/master/m4macros/glib-gettext.m4#L356
.to:
https://gitlab.gnome.org/GNOME/glib/blob/master/m4macros/glib-gettext.m4#L437
That's a shame, as ecrypt-utils does noit even have a dependency on libglib2 at all, except for this one macro. :-(
So, that could probably be a hint to fix that upstream in a more reasonable fashion anyway?
Regards,
Yann E. MORIN.
Quoted 7 lines
nowhere in output/host) but this macro is required by configure.ac. So, I am not sure I can provide conceptually better patch for now (but Yann's comments), may be it is possible to regenerate only src/utils/Makefile.in (from *.am file) instead of calling autoreconf for all *.am, *.ac files.
Regards,
Vadim Kochan
Signature · 6 lines
.-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------'
PATCH 1/1 package/ecryptfs-utils: Add support without gettext
Hi Yann, All
Quoted 67 lines · Yann E. MORIN
Vadim, All,
On 2019-03-13 21:15 +0200, Vadym Kochan spake thusly:
Quoted 2 lines · Yann E. MORIN
Quoted 1 line
On 2019-03-13 00:20 +0200, Vadim Kochan spake thusly:
[--SNIP--]
Quoted 18 lines
Quoted 8 lines
package/ecryptfs-utils/ecryptfs-common line 27
Quoted 4 lines
package/ecryptfs-utils/ecryptfs-common new file +4
-0+gettext() { + if [ -z "${GETTEXT_PROG}" ]; then + GETTEXT_PROG=$(which gettext) + if [ $? != 0 ]; then!= is a string comparison. For numbers, you will want to use -ne (or -eq), see below.
Quoted 9 lines
package/ecryptfs-utils/ecryptfs-common line 33
Quoted 6 lines
package/ecryptfs-utils/ecryptfs-common new file +6
-0+ GETTEXT_PROG=gettext_echo + fi + fi + + ${GETTEXT_PROG} "$@" +}This means that a script that calls gettext more than once will actually try to resolve it each time. This is not optimum.
Quoted 2 lines
But I check the
GETTEXT_PROGvariable on the start, if it is not empty then just:${GETTEXT_PROG} "$@"Hmm... Right, and the resolution is indeed done only once. My bad.
Quoted 31 lines
Quoted 31 lines
Instead, I think ecryptfs-common should basically look something like:
if ! which gettext >/dev/null 2>&1; then gettext() { if [ -n "${GETTEXT}" ]; then # Weird construct so that script that are 'set -e' # fail at the call site of gettext and not here. "${GETTEXT}" "${@}" || return $? return 0 fi while [ ${#} -ne 0 ]; do case "${1}" in (-h) printf "no help\n"; return 0;; (-V) printf "0.0.0\n"; return 0;; (-d|--domain) shift 2;; (-d*|--domain=*) shift 1;; (-e|-E|-n) shift 1;; (-s) shift 1;; # Ignore? (-*) printf "invalid option '%s'\n" "${1}" >&2; return 1;; (*) break;; esac done case ${#} in (0) printf "missing arguments\n" >&2; return 1;; (1) printf "%s" "${1}";; (2) shift; printf "%s" "${2}";; (*) printf "too many arguments\n" >&2; return 1;; esac } fiQuoted 2 lines
Quoted 2 lines
I.e. if there is no gettext program, you define a function named gettext.
The difference then between your code and mine, is that yours is doing a lazy resolution (i.e. resolving at first call) while mine is doing an early resolution (i.e. resolving when parsing).
Quoted 9 lines
Additionally, since your code is using a two-level function call (gettext ->
gettext_echo), it's a bit more complex to handle scritps that are 'set -e' and ensure they get the error at the call site rather than in internal details of the emulating function.But my suggestion would be that we just provide a gettext wrapper script (not function) when gettext is not installed. This is much simpler because there is thus no need to patch upstream.
Right, that would be much better solution than fixing ecryptfs-utils, but this wrapper should be installed by something like gettext-tiny (this is still the option if the ecryptfs-utils's solution will fail) for the target.
Quoted 16 lines
Quoted 7 lines
Thanks for your comments, anyway conceptually this patch is wrong. I tried to do it in the right way - install ecryptfs-common from ecryptfs-utils in src/utils/Makefile.am, but faced with autoreconf issue (autoreconf is required because src/utils/Makefile.am is changed by patch which adds installation of ecryptfs-common), but autoreconf fails to regenerate needed files because it removes aclocal.m4 which has definition of
AM_GLIB_GNU_GETTEXTmacro (which is not defined by host-gettextDang, indeed it is a big hammer to add a dependency onto host-libglib2 just for this oe macro, which by the way is deprecated, and that upstream suggests to remove in favour of the official gettext one:
https://gitlab.gnome.org/GNOME/glib/blob/master/m4macros/glib-gettext.m4#L356
.to:
https://gitlab.gnome.org/GNOME/glib/blob/master/m4macros/glib-gettext.m4#L437
Quoted 6 lines
That's a shame, as ecrypt-utils does noit even have a dependency on libglib2 at all, except for this one macro. :-(
So, that could probably be a hint to fix that upstream in a more reasonable fashion anyway?
I am trying to re-do the patch to use AM_GNU_GETTEXT instead of AM_GLIB_GNU_GETTEXT.
Regards,
Vadim Kochan