Skip to contentSkip to conversation

imx8mq_evk: README: Need to copy bl31.bin to U-Boot source tree

PATCH New Fabio Estevam 2 participants 6 messages Mar 13, 2019 – Apr 2, 2019 Arm i.MX and Layerscape

lore
Share & tools
lore

Fabio Estevam

author reviewer
#0 lore raw

PATCH 1/3 imx8mq_evk: README: Need to copy bl31.bin to U-Boot source tree

After building ATF it is needed to copy the generated bl31.bin file to the U-Boot source tree.

Make this step explicit in the instructions.

---
 board/freescale/imx8mq_evk/README | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
board/freescale/imx8mq_evk/README +2 -1
index 2529f7da3d..bd5ee12722 100644
@@ -9,13 +9,14 @@ Quick Start
 
 Get and Build the ARM Trusted firmware
 ====================
+Note: srctree is U-Boot source directory
 Get ATF from: https://source.codeaurora.org/external/imx/imx-atf
 branch: imx_4.14.62_1.0.0_beta
 $ make PLAT=imx8mq bl31
+$ cp build/imx8mq/release/bl31.bin $(srctree)
 
 Get the ddr and hdmi firmware
 ====================
-Note: srctree is U-Boot source directory
 $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-7.9.bin
 $ chmod +x firmware-imx-7.9.bin
 $ ./firmware-imx-7.9.bin
Signature · 1 line
2.17.1
author reviewer
#1 lore raw

PATCH 2/3 imx8mq_evk: README: Fix a typo in the destination path

The DDR firmware binaries should be copied to '$(srctree)', so fix a typo.

---
 board/freescale/imx8mq_evk/README | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
board/freescale/imx8mq_evk/README +1 -1
index bd5ee12722..aa9fbd8eaf 100644
@@ -21,7 +21,7 @@ $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-7.9.bin
 $ chmod +x firmware-imx-7.9.bin
 $ ./firmware-imx-7.9.bin
 $ cp firmware-imx-7.9/firmware/hdmi/cadence/signed_hdmi_imx8m.bin $(srctree)
-$ cp firmware-imx-7.9/firmware/ddr/synopsys/lpddr4*.bin $(srctee)
+$ cp firmware-imx-7.9/firmware/ddr/synopsys/lpddr4*.bin $(srctree)
 
 Build U-Boot
 ====================
Signature · 1 line
2.17.1
#2 lore raw

PATCH 2/3 imx8mq_evk: README: Fix a typo in the destination path

Quoted 3 lines

The DDR firmware binaries should be copied to '$(srctree)', so fix a typo.

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
author reviewer
#3 lore raw

PATCH 3/3 imx8mq_evk: README: Make the underline marker fill the whole sentence

In reply to Fabio Estevam

Let the underline marker "=" fill the whole sentence for better readability.

---
 board/freescale/imx8mq_evk/README | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
board/freescale/imx8mq_evk/README +5 -5
index aa9fbd8eaf..c1d400bcf9 100644
@@ -1,14 +1,14 @@
 U-Boot for the NXP i.MX8MQ EVK board
 
 Quick Start
-====================
+===========
 - Build the ARM Trusted firmware binary
 - Get ddr and hdmi fimware
 - Build U-Boot
 - Boot
 
 Get and Build the ARM Trusted firmware
-====================
+======================================
 Note: srctree is U-Boot source directory
 Get ATF from: https://source.codeaurora.org/external/imx/imx-atf
 branch: imx_4.14.62_1.0.0_beta
@@ -16,7 +16,7 @@ $ make PLAT=imx8mq bl31
 $ cp build/imx8mq/release/bl31.bin $(srctree)
 
 Get the ddr and hdmi firmware
-====================
+=============================
 $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-7.9.bin
 $ chmod +x firmware-imx-7.9.bin
 $ ./firmware-imx-7.9.bin
@@ -24,7 +24,7 @@ $ cp firmware-imx-7.9/firmware/hdmi/cadence/signed_hdmi_imx8m.bin $(srctree)
 $ cp firmware-imx-7.9/firmware/ddr/synopsys/lpddr4*.bin $(srctree)
 
 Build U-Boot
-====================
+============
 $ export CROSS_COMPILE=aarch64-poky-linux-
 $ make imx8mq_evk_defconfig
 $ make flash.bin
@@ -33,5 +33,5 @@ Burn the flash.bin to MicroSD card offset 33KB
 $sudo dd if=flash.bin of=/dev/sd[x] bs=1024 seek=33
 
 Boot
-====================
+====
 Set Boot switch SW801: 1100 and Bmode: 10 to boot from Micro SD.
Signature · 1 line
2.17.1
#4 lore raw

PATCH 3/3 imx8mq_evk: README: Make the underline marker fill the whole sentence

Quoted 3 lines

Let the underline marker "=" fill the whole sentence for better readability.

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
#5 lore raw

PATCH 1/3 imx8mq_evk: README: Need to copy bl31.bin to U-Boot source tree

In reply to Fabio Estevam
Quoted 4 lines

After building ATF it is needed to copy the generated bl31.bin file to the U-Boot source tree.
Make this step explicit in the instructions.

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================