Skip to contentSkip to conversation

ARM: dts: sun8i-h3: Add support for the RerVision H3-DVK board

PATCH Applied Paul Kocialkowski 2 participants 2 messages Mar 15, 2019

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH v3 1/1 ARM: dts: sun8i-h3: Add support for the RerVision H3-DVK board

This is an H3-based board that sticks close to the reference design.

Supported features:
* UART
* DRAM
* MMC
* eMMC
* Ethernet
* USB host
* USB peripheral
* HDMI

---
Changes since v2:
* Actually made the changes instead of sending the same patch again.

Changes since v1:
* Removed unneeded changes to mmc2_8bit_pins node;
* Renamed HDMI connector nodes to match other boards.

 arch/arm/boot/dts/Makefile                   |   1 +
 arch/arm/boot/dts/sun8i-h3-rervision-dvk.dts | 114 +++++++++++++++++++
 2 files changed, 115 insertions(+)
 create mode 100644 arch/arm/boot/dts/sun8i-h3-rervision-dvk.dts
arch/arm/boot/dts/Makefile +1 -0
index bd40148a15b2..8db275b75214 100644
@@ -1078,6 +1078,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
 	sun8i-h3-orangepi-plus.dtb \
 	sun8i-h3-orangepi-plus2e.dtb \
 	sun8i-h3-orangepi-zero-plus2.dtb \
+	sun8i-h3-rervision-dvk.dtb \
 	sun8i-r16-bananapi-m2m.dtb \
 	sun8i-r16-nintendo-nes-classic.dtb \
 	sun8i-r16-nintendo-super-nes-classic.dtb \
arch/arm/boot/dts/sun8i-h3-rervision-dvk.dts new file +114 -0

114 lines not on this page · raw message

Signature · 1 line
2.21.0
#1 lore raw
Quoted 12 lines · Paul Kocialkowski

This is an H3-based board that sticks close to the reference design.

Supported features:
* UART
* DRAM
* MMC
* eMMC
* Ethernet
* USB host
* USB peripheral
* HDMI

Quoted 1 line

Applied, thanks!
Maxime

Signature · 3 lines
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com