PHY: For 5.1 -rc
Hi Greg,
Please find the pull request for 5.1 -rc cycle below.
It fixes PHY programming sequence in phy-ti-pipe3 driver to align with TRM, requests IRQ only for OTG in phy-rcar-gen3-usb2 and a bunch of other linker errors and compilation warnings seen in randconfig.
Please see the complete list of changes in the tag message below and let me know if I have to make any modifications.
Thanks
Kishon
The following changes since commit 9e98c678c2d6ae3a17cb2de55d17f69dddaa231b:
Linux 5.1-rc1 (2019-03-17 14:22:26 -0700)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy.git tags/phy-for-5.1-rc
for you to fetch changes up to d5d60c3f25ab52de7c5dfd31f584f190b754629e:
phy: fix platform_no_drv_owner.cocci warnings (2019-04-03 10:02:20 +0530)
----------------------------------------------------------------
phy: for 5.1-rc
*) Follow TRM sequence in phy-ti-pipe3 driver to ensure DPLL & PHY
operates correctly over the entire temperature range
*) Fix missing bit-wise 'OR' operator in ti-pipe3 driver *) Fix to request IRQ only for OTG in phy-rcar-gen3-usb2 driver *) Fix linker errors and compilation warnings got with randconfig *) Fix sparse warnings and .cocci warnings
----------------------------------------------------------------
Arnd Bergmann (3):
phy: allwinner: allow compile testing
phy: ti: usb2: fix OMAP_CONTROL_PHY dependency
phy: mapphone-mdm6600: add gpiolib dependency
Colin Ian King (1):
phy: ti-pipe3: fix missing bit-wise or operator when assigning val
Fabrizio Castro (1):
phy: renesas: rcar-gen3-usb2: No need to request IRQ for non-OTG
Roger Quadros (4):
phy: ti-pipe3: Introduce mode property in driver data
phy: ti-pipe3: improve DPLL stability for SATA & USB
phy: ti-pipe3: Fix SATA & USB PHY power up sequence
phy: ti-pipe3: Fix PCIe power up sequence
Tony Lindgren (1):
phy: phy-twl4030-usb: Fix cable state handling
YueHaibing (3):
phy: rockchip-typec: Make usb3_pll_cfg and dp_pll_cfg static
phy: qcom-ufs: Make ufs_qcom_phy_disable_iface_clk static
phy: fix platform_no_drv_owner.cocci warnings
drivers/phy/allwinner/Kconfig | 9 ++-- drivers/phy/marvell/phy-mvebu-a3700-utmi.c | 1 - drivers/phy/motorola/Kconfig | 2 +- drivers/phy/qualcomm/phy-qcom-ufs.c | 2 +- drivers/phy/renesas/phy-rcar-gen3-usb2.c | 27 ++++++------ drivers/phy/rockchip/phy-rockchip-typec.c | 4 +- drivers/phy/ti/Kconfig | 2 +- drivers/phy/ti/phy-ti-pipe3.c | 362 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++----------------------------------------- drivers/phy/ti/phy-twl4030-usb.c | 35 ++++++--------- 9 files changed, 303 insertions(+), 141 deletions(-)
Quoted 64 lines · Kishon Vijay Abraham I
Hi Greg,
Please find the pull request for 5.1 -rc cycle below.
It fixes PHY programming sequence in phy-ti-pipe3 driver to align with TRM, requests IRQ only for OTG in phy-rcar-gen3-usb2 and a bunch of other linker errors and compilation warnings seen in randconfig.
Please see the complete list of changes in the tag message below and let me know if I have to make any modifications.
Thanks
KishonThe following changes since commit
9e98c678c2d6ae3a17cb2de55d17f69dddaa231b:Linux 5.1-rc1 (2019-03-17 14:22:26 -0700)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy.gittags/phy-for-5.1-rcfor you to fetch changes up to
d5d60c3f25ab52de7c5dfd31f584f190b754629e:phy: fix
platform_no_drv_owner.cocciwarnings (2019-04-03 10:02:20 +0530)----------------------------------------------------------------
phy: for 5.1-rc*) Follow TRM sequence in phy-ti-pipe3 driver to ensure DPLL & PHY
operates correctly over the entire temperature range
*) Fix missing bit-wise 'OR' operator in ti-pipe3 driver *) Fix to request IRQ only for OTG in phy-rcar-gen3-usb2 driver *) Fix linker errors and compilation warnings got with randconfig *) Fix sparse warnings and .cocci warningsSigned-off-by Kishon Vijay Abraham I <[email protected]>----------------------------------------------------------------
Arnd Bergmann (3):
phy: allwinner: allow compile testing
phy: ti: usb2: fixOMAP_CONTROL_PHYdependency
phy: mapphone-mdm6600: add gpiolib dependencyColin Ian King (1):
phy: ti-pipe3: fix missing bit-wise or operator when assigning valFabrizio Castro (1):
phy: renesas: rcar-gen3-usb2: No need to request IRQ for non-OTGRoger Quadros (4):
phy: ti-pipe3: Introduce mode property in driver data
phy: ti-pipe3: improve DPLL stability for SATA & USB
phy: ti-pipe3: Fix SATA & USB PHY power up sequence
phy: ti-pipe3: Fix PCIe power up sequenceTony Lindgren (1):
phy: phy-twl4030-usb: Fix cable state handlingYueHaibing (3):
phy: rockchip-typec: Makeusb3_pll_cfganddp_pll_cfgstatic
phy: qcom-ufs: Makeufs_qcom_phy_disable_iface_clkstatic
phy: fixplatform_no_drv_owner.cocciwarnings
Quoted 8 lines
drivers/phy/allwinner/Kconfig | 9 ++-- drivers/phy/marvell/phy-mvebu-a3700-utmi.c | 1 - drivers/phy/motorola/Kconfig | 2 +- drivers/phy/qualcomm/phy-qcom-ufs.c | 2 +- drivers/phy/renesas/phy-rcar-gen3-usb2.c | 27 ++++++------ drivers/phy/rockchip/phy-rockchip-typec.c | 4 +- drivers/phy/ti/Kconfig | 2 +- drivers/phy/ti/phy-ti-pipe3.c | 362 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-----------------------------------------
That's a lot of changes so late in the release cycle for one driver. Are you sure those are not 5.2-rc1 things?
thanks,
greg k-h
Hi Greg,
Quoted 74 lines · Greg Kroah-Hartman
Quoted 64 lines · Kishon Vijay Abraham I
Hi Greg,
Please find the pull request for 5.1 -rc cycle below.
It fixes PHY programming sequence in phy-ti-pipe3 driver to align with TRM, requests IRQ only for OTG in phy-rcar-gen3-usb2 and a bunch of other linker errors and compilation warnings seen in randconfig.
Please see the complete list of changes in the tag message below and let me know if I have to make any modifications.
Thanks
KishonThe following changes since commit
9e98c678c2d6ae3a17cb2de55d17f69dddaa231b:Linux 5.1-rc1 (2019-03-17 14:22:26 -0700)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy.gittags/phy-for-5.1-rcfor you to fetch changes up to
d5d60c3f25ab52de7c5dfd31f584f190b754629e:phy: fix
platform_no_drv_owner.cocciwarnings (2019-04-03 10:02:20 +0530)----------------------------------------------------------------
phy: for 5.1-rc*) Follow TRM sequence in phy-ti-pipe3 driver to ensure DPLL & PHY
operates correctly over the entire temperature range
*) Fix missing bit-wise 'OR' operator in ti-pipe3 driver *) Fix to request IRQ only for OTG in phy-rcar-gen3-usb2 driver *) Fix linker errors and compilation warnings got with randconfig *) Fix sparse warnings and .cocci warningsSigned-off-by Kishon Vijay Abraham I <[email protected]>----------------------------------------------------------------
Arnd Bergmann (3):
phy: allwinner: allow compile testing
phy: ti: usb2: fixOMAP_CONTROL_PHYdependency
phy: mapphone-mdm6600: add gpiolib dependencyColin Ian King (1):
phy: ti-pipe3: fix missing bit-wise or operator when assigning valFabrizio Castro (1):
phy: renesas: rcar-gen3-usb2: No need to request IRQ for non-OTGRoger Quadros (4):
phy: ti-pipe3: Introduce mode property in driver data
phy: ti-pipe3: improve DPLL stability for SATA & USB
phy: ti-pipe3: Fix SATA & USB PHY power up sequence
phy: ti-pipe3: Fix PCIe power up sequenceTony Lindgren (1):
phy: phy-twl4030-usb: Fix cable state handlingYueHaibing (3):
phy: rockchip-typec: Makeusb3_pll_cfganddp_pll_cfgstatic
phy: qcom-ufs: Makeufs_qcom_phy_disable_iface_clkstatic
phy: fixplatform_no_drv_owner.cocciwarningsQuoted 8 lines
drivers/phy/allwinner/Kconfig | 9 ++-- drivers/phy/marvell/phy-mvebu-a3700-utmi.c | 1 - drivers/phy/motorola/Kconfig | 2 +- drivers/phy/qualcomm/phy-qcom-ufs.c | 2 +- drivers/phy/renesas/phy-rcar-gen3-usb2.c | 27 ++++++------ drivers/phy/rockchip/phy-rockchip-typec.c | 4 +- drivers/phy/ti/Kconfig | 2 +- drivers/phy/ti/phy-ti-pipe3.c | 362 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-----------------------------------------
Quoted 2 lines
That's a lot of changes so late in the release cycle for one driver. Are you sure those are not 5.2-rc1 things?
hmm, I'll add ti-pipe3 changes for 5.2-rc1 and send you v2 for this pull request.
Thanks
Kishon