Skip to contentSkip to conversation

PHY: For 5.1 -rc

GIT PULL Kishon Vijay Abraham I 2 participants 3 messages Apr 3, 2019 – Apr 17, 2019

lore
Share & tools
lore
#0 lore raw

Hi Greg,

Please find the pull request for 5.1 -rc cycle below.

It fixes PHY programming sequence in phy-ti-pipe3 driver to align with TRM, requests IRQ only for OTG in phy-rcar-gen3-usb2 and a bunch of other linker errors and compilation warnings seen in randconfig.

Please see the complete list of changes in the tag message below and let me know if I have to make any modifications.

Thanks
Kishon

The following changes since commit 9e98c678c2d6ae3a17cb2de55d17f69dddaa231b:

Linux 5.1-rc1 (2019-03-17 14:22:26 -0700)

are available in the Git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy.git tags/phy-for-5.1-rc

for you to fetch changes up to d5d60c3f25ab52de7c5dfd31f584f190b754629e:

phy: fix platform_no_drv_owner.cocci warnings (2019-04-03 10:02:20 +0530)

----------------------------------------------------------------
phy: for 5.1-rc

*) Follow TRM sequence in phy-ti-pipe3 driver to ensure DPLL & PHY
operates correctly over the entire temperature range
*) Fix missing bit-wise 'OR' operator in ti-pipe3 driver *) Fix to request IRQ only for OTG in phy-rcar-gen3-usb2 driver *) Fix linker errors and compilation warnings got with randconfig *) Fix sparse warnings and .cocci warnings

----------------------------------------------------------------
Arnd Bergmann (3):
phy: allwinner: allow compile testing
phy: ti: usb2: fix OMAP_CONTROL_PHY dependency
phy: mapphone-mdm6600: add gpiolib dependency

Colin Ian King (1):
phy: ti-pipe3: fix missing bit-wise or operator when assigning val

Fabrizio Castro (1):
phy: renesas: rcar-gen3-usb2: No need to request IRQ for non-OTG

Roger Quadros (4):
phy: ti-pipe3: Introduce mode property in driver data
phy: ti-pipe3: improve DPLL stability for SATA & USB
phy: ti-pipe3: Fix SATA & USB PHY power up sequence
phy: ti-pipe3: Fix PCIe power up sequence

Tony Lindgren (1):
phy: phy-twl4030-usb: Fix cable state handling

YueHaibing (3):
phy: rockchip-typec: Make usb3_pll_cfg and dp_pll_cfg static
phy: qcom-ufs: Make ufs_qcom_phy_disable_iface_clk static
phy: fix platform_no_drv_owner.cocci warnings

 drivers/phy/allwinner/Kconfig              |   9 ++--
 drivers/phy/marvell/phy-mvebu-a3700-utmi.c |   1 -
 drivers/phy/motorola/Kconfig               |   2 +-
 drivers/phy/qualcomm/phy-qcom-ufs.c        |   2 +-
 drivers/phy/renesas/phy-rcar-gen3-usb2.c   |  27 ++++++------
 drivers/phy/rockchip/phy-rockchip-typec.c  |   4 +-
 drivers/phy/ti/Kconfig                     |   2 +-
 drivers/phy/ti/phy-ti-pipe3.c              | 362 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-----------------------------------------
 drivers/phy/ti/phy-twl4030-usb.c           |  35 ++++++---------
 9 files changed, 303 insertions(+), 141 deletions(-)
#1 lore raw
Quoted 64 lines · Kishon Vijay Abraham I

Hi Greg,

Please find the pull request for 5.1 -rc cycle below.

It fixes PHY programming sequence in phy-ti-pipe3 driver to align with TRM, requests IRQ only for OTG in phy-rcar-gen3-usb2 and a bunch of other linker errors and compilation warnings seen in randconfig.

Please see the complete list of changes in the tag message below and let me know if I have to make any modifications.

Thanks
Kishon

The following changes since commit 9e98c678c2d6ae3a17cb2de55d17f69dddaa231b:

Linux 5.1-rc1 (2019-03-17 14:22:26 -0700)

are available in the Git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy.git tags/phy-for-5.1-rc

for you to fetch changes up to d5d60c3f25ab52de7c5dfd31f584f190b754629e:

phy: fix platform_no_drv_owner.cocci warnings (2019-04-03 10:02:20 +0530)

----------------------------------------------------------------
phy: for 5.1-rc

*) Follow TRM sequence in phy-ti-pipe3 driver to ensure DPLL & PHY
operates correctly over the entire temperature range
*) Fix missing bit-wise 'OR' operator in ti-pipe3 driver *) Fix to request IRQ only for OTG in phy-rcar-gen3-usb2 driver *) Fix linker errors and compilation warnings got with randconfig *) Fix sparse warnings and .cocci warnings

----------------------------------------------------------------
Arnd Bergmann (3):
phy: allwinner: allow compile testing
phy: ti: usb2: fix OMAP_CONTROL_PHY dependency
phy: mapphone-mdm6600: add gpiolib dependency

Colin Ian King (1):
phy: ti-pipe3: fix missing bit-wise or operator when assigning val

Fabrizio Castro (1):
phy: renesas: rcar-gen3-usb2: No need to request IRQ for non-OTG

Roger Quadros (4):
phy: ti-pipe3: Introduce mode property in driver data
phy: ti-pipe3: improve DPLL stability for SATA & USB
phy: ti-pipe3: Fix SATA & USB PHY power up sequence
phy: ti-pipe3: Fix PCIe power up sequence

Tony Lindgren (1):
phy: phy-twl4030-usb: Fix cable state handling

YueHaibing (3):
phy: rockchip-typec: Make usb3_pll_cfg and dp_pll_cfg static
phy: qcom-ufs: Make ufs_qcom_phy_disable_iface_clk static
phy: fix platform_no_drv_owner.cocci warnings

Quoted 8 lines
 drivers/phy/allwinner/Kconfig              |   9 ++--
 drivers/phy/marvell/phy-mvebu-a3700-utmi.c |   1 -
 drivers/phy/motorola/Kconfig               |   2 +-
 drivers/phy/qualcomm/phy-qcom-ufs.c        |   2 +-
 drivers/phy/renesas/phy-rcar-gen3-usb2.c   |  27 ++++++------
 drivers/phy/rockchip/phy-rockchip-typec.c  |   4 +-
 drivers/phy/ti/Kconfig                     |   2 +-
 drivers/phy/ti/phy-ti-pipe3.c              | 362 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-----------------------------------------

That's a lot of changes so late in the release cycle for one driver. Are you sure those are not 5.2-rc1 things?

thanks,

greg k-h

#2 lore raw

Hi Greg,

Quoted 74 lines · Greg Kroah-Hartman
Quoted 64 lines · Kishon Vijay Abraham I

Hi Greg,

Please find the pull request for 5.1 -rc cycle below.

It fixes PHY programming sequence in phy-ti-pipe3 driver to align with TRM, requests IRQ only for OTG in phy-rcar-gen3-usb2 and a bunch of other linker errors and compilation warnings seen in randconfig.

Please see the complete list of changes in the tag message below and let me know if I have to make any modifications.

Thanks
Kishon

The following changes since commit 9e98c678c2d6ae3a17cb2de55d17f69dddaa231b:

Linux 5.1-rc1 (2019-03-17 14:22:26 -0700)

are available in the Git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy.git tags/phy-for-5.1-rc

for you to fetch changes up to d5d60c3f25ab52de7c5dfd31f584f190b754629e:

phy: fix platform_no_drv_owner.cocci warnings (2019-04-03 10:02:20 +0530)

----------------------------------------------------------------
phy: for 5.1-rc

*) Follow TRM sequence in phy-ti-pipe3 driver to ensure DPLL & PHY
operates correctly over the entire temperature range
*) Fix missing bit-wise 'OR' operator in ti-pipe3 driver *) Fix to request IRQ only for OTG in phy-rcar-gen3-usb2 driver *) Fix linker errors and compilation warnings got with randconfig *) Fix sparse warnings and .cocci warnings

----------------------------------------------------------------
Arnd Bergmann (3):
phy: allwinner: allow compile testing
phy: ti: usb2: fix OMAP_CONTROL_PHY dependency
phy: mapphone-mdm6600: add gpiolib dependency

Colin Ian King (1):
phy: ti-pipe3: fix missing bit-wise or operator when assigning val

Fabrizio Castro (1):
phy: renesas: rcar-gen3-usb2: No need to request IRQ for non-OTG

Roger Quadros (4):
phy: ti-pipe3: Introduce mode property in driver data
phy: ti-pipe3: improve DPLL stability for SATA & USB
phy: ti-pipe3: Fix SATA & USB PHY power up sequence
phy: ti-pipe3: Fix PCIe power up sequence

Tony Lindgren (1):
phy: phy-twl4030-usb: Fix cable state handling

YueHaibing (3):
phy: rockchip-typec: Make usb3_pll_cfg and dp_pll_cfg static
phy: qcom-ufs: Make ufs_qcom_phy_disable_iface_clk static
phy: fix platform_no_drv_owner.cocci warnings

Quoted 8 lines
 drivers/phy/allwinner/Kconfig              |   9 ++--
 drivers/phy/marvell/phy-mvebu-a3700-utmi.c |   1 -
 drivers/phy/motorola/Kconfig               |   2 +-
 drivers/phy/qualcomm/phy-qcom-ufs.c        |   2 +-
 drivers/phy/renesas/phy-rcar-gen3-usb2.c   |  27 ++++++------
 drivers/phy/rockchip/phy-rockchip-typec.c  |   4 +-
 drivers/phy/ti/Kconfig                     |   2 +-
 drivers/phy/ti/phy-ti-pipe3.c              | 362 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-----------------------------------------
Quoted 2 lines

That's a lot of changes so late in the release cycle for one driver. Are you sure those are not 5.2-rc1 things?

hmm, I'll add ti-pipe3 changes for 5.2-rc1 and send you v2 for this pull request.

Thanks
Kishon