Skip to contentSkip to conversation

tests/perf: Fix timeout for RC6 re-enabling

PATCH Superseded Imre Deak 4 participants 9 messages Apr 16, 2019

lore
Share & tools
lore

Imre Deak

author
#0 lore raw

PATCH 1/1 tests/perf: Fix timeout for RC6 re-enabling

After closing the perf stream the parking the GPU engines may easily take more than 1 second: releasing the FD itself results in a new request submission via i915_perf_release()->i915_oa_stream_destroy()-> gen8_disable_metric_set(). That means a >1sec delay for the delayed unpark to be called due to the delay from

queue_delayed_work(retire_work, round_jiffies_up_relative(HZ))

+ the delay from

mod_delayed_work(idle_work, msecs_to_jiffies(100))

Scheduling may push this delay even further, I measured >2sec delays on my GLK. Based on this give some slack for the RC6 residency counter to change.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103179

Cc Lionel Landwerlin <[email protected]>
Cc Chris Wilson <[email protected]>
---
 tests/perf.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)
tests/perf.c +7 -2
index 4307d36a..5dc10108 100644
@@ -3591,6 +3591,7 @@ test_rc6_disable(void)
 	};
 	unsigned long n_events_start, n_events_end;
 	unsigned long rc6_enabled;
+	int i;
 
 	rc6_enabled = 0;
 	igt_sysfs_scanf(sysfs, "power/rc6_enable", "%lu", &rc6_enabled);
@@ -3606,8 +3607,12 @@ test_rc6_disable(void)
 	__perf_close(stream_fd);
 
 	n_events_start = rc6_residency_ms();
-	nanosleep(&(struct timespec){ .tv_sec = 1, .tv_nsec = 0 }, NULL);
-	n_events_end = rc6_residency_ms();
+	for (i = 0; i < 5; i++) {
+		nanosleep(&(struct timespec){ .tv_sec = 1, .tv_nsec = 0 }, NULL);
+		n_events_end = rc6_residency_ms();
+		if (n_events_end != n_events_start)
+			break;
+	}
 	igt_assert_neq(n_events_end - n_events_start, 0);
 }
 
Signature · 6 lines
2.13.2

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
#1 lore raw

Quoting Imre Deak (2019-04-16 14:51:35)

Quoted 5 lines

After closing the perf stream the parking the GPU engines may easily take more than 1 second: releasing the FD itself results in a new request submission via i915_perf_release()->i915_oa_stream_destroy()-> gen8_disable_metric_set(). That means a >1sec delay for the delayed unpark to be called due to the delay from

igt_drop_caches_set(DROP_IDLE);

flushes the idle work handler immediately, though you will probably want DROP_ACTIVE | DROP_RETIRE to complete the picture, see gem_quiescent_gpu().
-Chris
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

author
#2 lore raw
Quoted 7 lines · Chris Wilson

Quoting Imre Deak (2019-04-16 14:51:35)

Quoted 5 lines

After closing the perf stream the parking the GPU engines may easily take more than 1 second: releasing the FD itself results in a new request submission via i915_perf_release()->i915_oa_stream_destroy()-> gen8_disable_metric_set(). That means a >1sec delay for the delayed unpark to be called due to the delay from

Quoted 5 lines

igt_drop_caches_set(DROP_IDLE);

flushes the idle work handler immediately, though you will probably want DROP_ACTIVE | DROP_RETIRE to complete the picture, see gem_quiescent_gpu().

Thanks, seems to work, will respin with that.

--Imre
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#3 lore raw
In reply to Imre Deak
Quoted 8 lines · Imre Deak

After closing the perf stream the parking the GPU engines may easily take more than 1 second: releasing the FD itself results in a new request submission via i915_perf_release()->i915_oa_stream_destroy()-> gen8_disable_metric_set(). That means a >1sec delay for the delayed unpark to be called due to the delay from

queue_delayed_work(retire_work, round_jiffies_up_relative(HZ))

Quoted 7 lines

+ the delay from

mod_delayed_work(idle_work, msecs_to_jiffies(100))

Scheduling may push this delay even further, I measured >2sec delays on my GLK. Based on this give some slack for the RC6 residency counter to change.

Thanks a lot for looking into this.

Whatever you do it will probably be better than the current state :)

Adding a couple of people who are also looking at fixing this test.

-Lionel

Quoted 26 lines

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103179

Cc Lionel Landwerlin <[email protected]>
Cc Chris Wilson <[email protected]>
---
  tests/perf.c | 9 +++++++--
  1 file changed, 7 insertions(+), 2 deletions(-)
tests/perf.c +1 -1
index 4307d36a..5dc10108 100644
@@ -3591,6 +3591,7 @@ test_rc6_disable(void)
  	};
  	unsigned long n_events_start, n_events_end;
  	unsigned long rc6_enabled;
+	int i;
 
  	rc6_enabled = 0;
  	igt_sysfs_scanf(sysfs, "power/rc6_enable", "%lu", &rc6_enabled);
@@ -3606,8 +3607,12 @@ test_rc6_disable(void)
  	__perf_close(stream_fd);
 
  	n_events_start = rc6_residency_ms();
-	nanosleep(&(struct timespec){ .tv_sec = 1, .tv_nsec = 0 }, NULL);

tests/perf.c test_rc6_disable(void) · line 3618

Quoted 10 lines
tests/perf.c +6 -1
-	n_events_end = rc6_residency_ms();
+	for (i = 0; i < 5; i++) {
+		nanosleep(&(struct timespec){ .tv_sec = 1, .tv_nsec = 0 }, NULL);
+		n_events_end = rc6_residency_ms();
+		if (n_events_end != n_events_start)
+			break;
+	}
  	igt_assert_neq(n_events_end - n_events_start, 0);
  }
 

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

author
#4 lore raw

PATCH v2 1/1 tests/perf: Fix timeout for RC6 re-enabling

In reply to Imre Deak

After closing the perf stream the parking the GPU engines may easily take more than 1 second: releasing the FD itself results in a new request submission via i915_perf_release()->i915_oa_stream_destroy()-> gen8_disable_metric_set(). That means a >1sec delay for the delayed unpark to be called due to the delay from

queue_delayed_work(retire_work, round_jiffies_up_relative(HZ))

+ the delay from

mod_delayed_work(idle_work, msecs_to_jiffies(100))

Scheduling may push this delay even further, I measured >2sec delays on my GLK.

Fix this by calling gem_quiescent_gpu() which syncs up with the idle work, thus making sure we'll see RC6 residency afterwards.

v2:
- Use gem_quiescent_gpu() instead of increasing the timeout. (Chris)

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103179

Cc Lionel Landwerlin <[email protected]>
Cc Chris Wilson <[email protected]>
---
 tests/perf.c | 1 +
 1 file changed, 1 insertion(+)
tests/perf.c +1 -0
index 4307d36a..f2c0aeb8 100644
@@ -3604,6 +3604,7 @@ test_rc6_disable(void)
 	igt_assert_eq(n_events_end - n_events_start, 0);
 
 	__perf_close(stream_fd);
+	gem_quiescent_gpu(drm_fd);
 
 	n_events_start = rc6_residency_ms();
 	nanosleep(&(struct timespec){ .tv_sec = 1, .tv_nsec = 0 }, NULL);
Signature · 6 lines
2.13.2

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
Reviewed-by on v2 1/1
#5 lore raw
Quoted 18 lines · Imre Deak

After closing the perf stream the parking the GPU engines may easily take more than 1 second: releasing the FD itself results in a new request submission via i915_perf_release()->i915_oa_stream_destroy()-> gen8_disable_metric_set(). That means a >1sec delay for the delayed unpark to be called due to the delay from

queue_delayed_work(retire_work, round_jiffies_up_relative(HZ))

+ the delay from

mod_delayed_work(idle_work, msecs_to_jiffies(100))

Scheduling may push this delay even further, I measured >2sec delays on my GLK.

Fix this by calling gem_quiescent_gpu() which syncs up with the idle work, thus making sure we'll see RC6 residency afterwards.

Quoted 7 lines

v2:
- Use gem_quiescent_gpu() instead of increasing the timeout. (Chris)

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103179

Cc Lionel Landwerlin <[email protected]>
Cc Chris Wilson <[email protected]>
Quoted 9 lines
---
  tests/perf.c | 1 +
  1 file changed, 1 insertion(+)
tests/perf.c +0 -0
index 4307d36a..f2c0aeb8 100644

tests/perf.c test_rc6_disable(void) · line 3610

Quoted 7 lines
tests/perf.c +1 -0
@@ -3604,6 +3604,7 @@ test_rc6_disable(void)
  	igt_assert_eq(n_events_end - n_events_start, 0);
 
  	__perf_close(stream_fd);
+	gem_quiescent_gpu(drm_fd);
 
  	n_events_start = rc6_residency_ms();
  	nanosleep(&(struct timespec){ .tv_sec = 1, .tv_nsec = 0 }, NULL);

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#6 lore raw

[igt-dev] ✓ Fi.CI.BAT: success for tests/perf: Fix timeout for RC6 re-enabling (rev2)

In reply to Imre Deak
== Series Details ==

== Series Details ==

Series: tests/perf: Fix timeout for RC6 re-enabling (rev2)
URL : https://patchwork.freedesktop.org/series/59582/
State : success

== Summary ==

CI Bug Log - changes from CI_DRM_5938 -> IGTPW_2868
====================================================

Summary
-------

**SUCCESS**

No regressions found.

External URL: https://patchwork.freedesktop.org/api/1.0/series/59582/revisions/2/mbox/

Known issues
------------

Here are the changes found in IGTPW_2868 that come from known issues:

### IGT changes ###

#### Issues hit ####

* igt@amdgpu/amd_basic@semaphore:
- fi-bdw-5557u: NOTRUN -> SKIP [fdo#109271] +38

* igt@gem_exec_suspend@basic-s3:
- fi-blb-e6850: PASS -> INCOMPLETE [fdo#107718]

* igt@i915_pm_rpm@module-reload:
- fi-skl-6770hq: PASS -> FAIL [fdo#108511]

* igt@i915_selftest@live_contexts:
- fi-bdw-gvtdvm: PASS -> DMESG-FAIL [fdo#110235 ]

* igt@kms_cursor_legacy@basic-flip-before-cursor-varying-size:
- fi-glk-dsi: PASS -> INCOMPLETE [fdo#103359] / [k.org#198133]

* igt@kms_pipe_crc_basic@nonblocking-crc-pipe-a:
- fi-byt-clapper: PASS -> FAIL [fdo#103191]

* igt@kms_psr@cursor_plane_move:
- fi-skl-6260u: NOTRUN -> SKIP [fdo#109271] +37

#### Possible fixes ####

* igt@i915_selftest@live_contexts:
- fi-skl-gvtdvm: DMESG-FAIL [fdo#110235 ] -> PASS

* igt@kms_frontbuffer_tracking@basic:
- fi-byt-clapper: FAIL [fdo#103167] -> PASS

[fdo#103167]: https://bugs.freedesktop.org/show_bug.cgi?id=103167
[fdo#103191]: https://bugs.freedesktop.org/show_bug.cgi?id=103191
[fdo#103359]: https://bugs.freedesktop.org/show_bug.cgi?id=103359
[fdo#107718]: https://bugs.freedesktop.org/show_bug.cgi?id=107718
[fdo#108511]: https://bugs.freedesktop.org/show_bug.cgi?id=108511
[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[fdo#110235 ]: https://bugs.freedesktop.org/show_bug.cgi?id=110235
[k.org#198133]: https://bugzilla.kernel.org/show_bug.cgi?id=198133

Participating hosts (47 -> 42)
------------------------------

Additional (2): fi-bdw-5557u fi-skl-6260u
Missing (7): fi-kbl-soraka fi-ilk-m540 fi-hsw-4200u fi-bsw-cyan fi-ctg-p8600 fi-icl-u3 fi-bdw-samus

Build changes
-------------

* IGT: IGT_4951 -> IGTPW_2868

CI_DRM_5938: 61a332623362ea87cdde81115229b1b955335654 @ git://anongit.freedesktop.org/gfx-ci/linux
IGTPW_2868: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2868/
IGT_4951: cc9a60c029432b5843724e4f2c57f9f815f7adbb @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2868/
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

author
#7 lore raw

Re: [igt-dev] ✓ Fi.CI.BAT: success for tests/perf: Fix timeout for RC6 re-enabling (rev2)

Quoted 5 lines · Patchwork

== Series Details ==

Series: tests/perf: Fix timeout for RC6 re-enabling (rev2)
URL : https://patchwork.freedesktop.org/series/59582/
State : success

Thanks for the reviews, pushed.

Quoted 77 lines

== Summary ==

CI Bug Log - changes from CI_DRM_5938 -> IGTPW_2868
====================================================

Summary
-------

**SUCCESS**

No regressions found.

External URL: https://patchwork.freedesktop.org/api/1.0/series/59582/revisions/2/mbox/

Known issues
------------

Here are the changes found in IGTPW_2868 that come from known issues:

### IGT changes ###

#### Issues hit ####

* igt@amdgpu/amd_basic@semaphore:
- fi-bdw-5557u: NOTRUN -> SKIP [fdo#109271] +38

* igt@gem_exec_suspend@basic-s3:
- fi-blb-e6850: PASS -> INCOMPLETE [fdo#107718]

* igt@i915_pm_rpm@module-reload:
- fi-skl-6770hq: PASS -> FAIL [fdo#108511]

* igt@i915_selftest@live_contexts:
- fi-bdw-gvtdvm: PASS -> DMESG-FAIL [fdo#110235 ]

* igt@kms_cursor_legacy@basic-flip-before-cursor-varying-size:
- fi-glk-dsi: PASS -> INCOMPLETE [fdo#103359] / [k.org#198133]

* igt@kms_pipe_crc_basic@nonblocking-crc-pipe-a:
- fi-byt-clapper: PASS -> FAIL [fdo#103191]

* igt@kms_psr@cursor_plane_move:
- fi-skl-6260u: NOTRUN -> SKIP [fdo#109271] +37

#### Possible fixes ####

* igt@i915_selftest@live_contexts:
- fi-skl-gvtdvm: DMESG-FAIL [fdo#110235 ] -> PASS

* igt@kms_frontbuffer_tracking@basic:
- fi-byt-clapper: FAIL [fdo#103167] -> PASS

[fdo#103167]: https://bugs.freedesktop.org/show_bug.cgi?id=103167
[fdo#103191]: https://bugs.freedesktop.org/show_bug.cgi?id=103191
[fdo#103359]: https://bugs.freedesktop.org/show_bug.cgi?id=103359
[fdo#107718]: https://bugs.freedesktop.org/show_bug.cgi?id=107718
[fdo#108511]: https://bugs.freedesktop.org/show_bug.cgi?id=108511
[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[fdo#110235 ]: https://bugs.freedesktop.org/show_bug.cgi?id=110235
[k.org#198133]: https://bugzilla.kernel.org/show_bug.cgi?id=198133

Participating hosts (47 -> 42)
------------------------------

Additional (2): fi-bdw-5557u fi-skl-6260u
Missing (7): fi-kbl-soraka fi-ilk-m540 fi-hsw-4200u fi-bsw-cyan fi-ctg-p8600 fi-icl-u3 fi-bdw-samus

Build changes
-------------

* IGT: IGT_4951 -> IGTPW_2868

Quoted 7 lines

CI_DRM_5938: 61a332623362ea87cdde81115229b1b955335654 @ git://anongit.freedesktop.org/gfx-ci/linux
IGTPW_2868: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2868/
IGT_4951: cc9a60c029432b5843724e4f2c57f9f815f7adbb @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2868/

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#8 lore raw

[igt-dev] ✓ Fi.CI.IGT: success for tests/perf: Fix timeout for RC6 re-enabling (rev2)

In reply to Imre Deak
== Series Details ==

== Series Details ==

Series: tests/perf: Fix timeout for RC6 re-enabling (rev2)
URL : https://patchwork.freedesktop.org/series/59582/
State : success

== Summary ==

CI Bug Log - changes from CI_DRM_5938_full -> IGTPW_2868_full
====================================================

Summary
-------

**SUCCESS**

No regressions found.

External URL: https://patchwork.freedesktop.org/api/1.0/series/59582/revisions/2/mbox/

Known issues
------------

Here are the changes found in IGTPW_2868_full that come from known issues:

### IGT changes ###

#### Issues hit ####

* igt@gem_eio@in-flight-suspend:
- shard-apl: PASS -> DMESG-WARN [fdo#108566] +5

* igt@gem_exec_parallel@bsd2-fds:
- shard-iclb: NOTRUN -> SKIP [fdo#109276] +12

* igt@gem_userptr_blits@coherency-sync:
- shard-iclb: NOTRUN -> SKIP [fdo#109290]

* igt@i915_pm_lpsp@edp-native:
- shard-iclb: NOTRUN -> SKIP [fdo#109301]

* igt@i915_suspend@fence-restore-tiled2untiled:
- shard-kbl: PASS -> INCOMPLETE [fdo#103665]

* igt@kms_atomic_transition@3x-modeset-transitions-nonblocking-fencing:
- shard-snb: NOTRUN -> SKIP [fdo#109271] / [fdo#109278] +2

* igt@kms_atomic_transition@6x-modeset-transitions:
- shard-iclb: NOTRUN -> SKIP [fdo#109278] +11

* igt@kms_chamelium@hdmi-crc-planes-random:
- shard-iclb: NOTRUN -> SKIP [fdo#109284] +4

* igt@kms_color@pipe-b-degamma:
- shard-iclb: NOTRUN -> FAIL [fdo#104782] +1

* igt@kms_cursor_crc@cursor-512x170-onscreen:
- shard-iclb: NOTRUN -> SKIP [fdo#109279]

* igt@kms_cursor_legacy@2x-long-cursor-vs-flip-atomic:
- shard-hsw: PASS -> FAIL [fdo#105767]

* igt@kms_cursor_legacy@2x-long-flip-vs-cursor-atomic:
- shard-glk: PASS -> FAIL [fdo#104873]

* igt@kms_cursor_legacy@cursora-vs-flipb-varying-size:
- shard-iclb: NOTRUN -> SKIP [fdo#109274] +10

* igt@kms_flip@2x-flip-vs-expired-vblank:
- shard-glk: PASS -> FAIL [fdo#105363]

* igt@kms_force_connector_basic@prune-stale-modes:
- shard-iclb: NOTRUN -> SKIP [fdo#109285]

* igt@kms_frontbuffer_tracking@fbc-1p-primscrn-cur-indfb-draw-render:
- shard-apl: PASS -> FAIL [fdo#103167]
- shard-kbl: PASS -> FAIL [fdo#103167]

* igt@kms_frontbuffer_tracking@fbc-1p-primscrn-pri-shrfb-draw-pwrite:
- shard-iclb: PASS -> FAIL [fdo#103167] +3

* igt@kms_frontbuffer_tracking@fbc-2p-primscrn-pri-shrfb-draw-blt:
- shard-glk: PASS -> FAIL [fdo#103167]

* igt@kms_frontbuffer_tracking@fbc-2p-scndscrn-spr-indfb-draw-mmap-gtt:
- shard-iclb: NOTRUN -> SKIP [fdo#109280] +26

* igt@kms_frontbuffer_tracking@fbcpsr-1p-primscrn-pri-indfb-draw-blt:
- shard-iclb: PASS -> FAIL [fdo#109247] +15

* igt@kms_frontbuffer_tracking@psr-2p-scndscrn-cur-indfb-onoff:
- shard-kbl: NOTRUN -> SKIP [fdo#109271] +2

* igt@kms_frontbuffer_tracking@psr-2p-scndscrn-indfb-msflip-blt:
- shard-snb: NOTRUN -> SKIP [fdo#109271] +38

* igt@kms_lease@page_flip_implicit_plane:
- shard-iclb: NOTRUN -> FAIL [fdo#110281]

* igt@kms_plane_scaling@pipe-b-scaler-with-rotation:
- shard-iclb: NOTRUN -> FAIL [fdo#109052]

* igt@kms_psr2_su@page_flip:
- shard-iclb: PASS -> SKIP [fdo#109642]

* igt@kms_psr@basic:
- shard-iclb: PASS -> FAIL [fdo#107383] / [fdo#110215]

* igt@kms_psr@psr2_cursor_mmap_cpu:
- shard-iclb: PASS -> SKIP [fdo#109441] +2

* igt@kms_psr@psr2_primary_mmap_gtt:
- shard-iclb: NOTRUN -> SKIP [fdo#109441] +2

* igt@kms_psr@sprite_mmap_gtt:
- shard-iclb: NOTRUN -> FAIL [fdo#107383] / [fdo#110215] +2

* igt@kms_rotation_crc@multiplane-rotation-cropping-top:
- shard-kbl: PASS -> FAIL [fdo#109016]

* igt@kms_vrr@flip-basic:
- shard-iclb: NOTRUN -> SKIP [fdo#109502]

* igt@perf@per-context-mode-unprivileged:
- shard-iclb: NOTRUN -> SKIP [fdo#109289] +1

* igt@perf_pmu@rc6:
- shard-kbl: PASS -> SKIP [fdo#109271]

* igt@prime_nv_pcopy@test3_2:
- shard-iclb: NOTRUN -> SKIP [fdo#109291] +2

* igt@prime_vgem@fence-flip-hang:
- shard-iclb: NOTRUN -> SKIP [fdo#109295]

#### Possible fixes ####

* igt@gem_tiled_swapping@non-threaded:
- shard-snb: FAIL [fdo#108686] -> PASS

* igt@gem_workarounds@suspend-resume:
- shard-apl: DMESG-WARN [fdo#108566] -> PASS +6

* igt@i915_pm_rc6_residency@rc6-accuracy:
- shard-snb: SKIP [fdo#109271] -> PASS

* igt@i915_pm_rpm@i2c:
- shard-iclb: DMESG-WARN [fdo#109982] -> PASS

* igt@kms_cursor_crc@cursor-128x42-sliding:
- shard-iclb: INCOMPLETE -> PASS

* igt@kms_frontbuffer_tracking@fbcpsr-1p-offscren-pri-indfb-draw-blt:
- shard-iclb: FAIL [fdo#109247] -> PASS +12

* igt@kms_frontbuffer_tracking@fbcpsr-1p-pri-indfb-multidraw:
- shard-iclb: FAIL [fdo#103167] -> PASS +4

* igt@kms_pipe_crc_basic@suspend-read-crc-pipe-a:
- shard-kbl: INCOMPLETE [fdo#103665] -> PASS

* igt@kms_plane_scaling@pipe-a-scaler-with-pixel-format:
- shard-glk: SKIP [fdo#109271] / [fdo#109278] -> PASS

* igt@kms_psr2_su@frontbuffer:
- shard-iclb: SKIP [fdo#109642] -> PASS

* igt@kms_psr@psr2_cursor_blt:
- shard-iclb: SKIP [fdo#109441] -> PASS

* igt@kms_psr@sprite_render:
- shard-iclb: FAIL [fdo#107383] / [fdo#110215] -> PASS +2

* igt@kms_rotation_crc@multiplane-rotation-cropping-bottom:
- shard-kbl: DMESG-FAIL [fdo#105763] -> PASS

* igt@kms_setmode@basic:
- shard-kbl: FAIL [fdo#99912] -> PASS

* igt@perf@oa-exponents:
- shard-glk: FAIL [fdo#105483] -> PASS

[fdo#103167]: https://bugs.freedesktop.org/show_bug.cgi?id=103167
[fdo#103665]: https://bugs.freedesktop.org/show_bug.cgi?id=103665
[fdo#104782]: https://bugs.freedesktop.org/show_bug.cgi?id=104782
[fdo#104873]: https://bugs.freedesktop.org/show_bug.cgi?id=104873
[fdo#105363]: https://bugs.freedesktop.org/show_bug.cgi?id=105363
[fdo#105483]: https://bugs.freedesktop.org/show_bug.cgi?id=105483
[fdo#105763]: https://bugs.freedesktop.org/show_bug.cgi?id=105763
[fdo#105767]: https://bugs.freedesktop.org/show_bug.cgi?id=105767
[fdo#107383]: https://bugs.freedesktop.org/show_bug.cgi?id=107383
[fdo#108566]: https://bugs.freedesktop.org/show_bug.cgi?id=108566
[fdo#108686]: https://bugs.freedesktop.org/show_bug.cgi?id=108686
[fdo#109016]: https://bugs.freedesktop.org/show_bug.cgi?id=109016
[fdo#109052]: https://bugs.freedesktop.org/show_bug.cgi?id=109052
[fdo#109247]: https://bugs.freedesktop.org/show_bug.cgi?id=109247
[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[fdo#109274]: https://bugs.freedesktop.org/show_bug.cgi?id=109274
[fdo#109276]: https://bugs.freedesktop.org/show_bug.cgi?id=109276
[fdo#109278]: https://bugs.freedesktop.org/show_bug.cgi?id=109278
[fdo#109279]: https://bugs.freedesktop.org/show_bug.cgi?id=109279
[fdo#109280]: https://bugs.freedesktop.org/show_bug.cgi?id=109280
[fdo#109284]: https://bugs.freedesktop.org/show_bug.cgi?id=109284
[fdo#109285]: https://bugs.freedesktop.org/show_bug.cgi?id=109285
[fdo#109289]: https://bugs.freedesktop.org/show_bug.cgi?id=109289
[fdo#109290]: https://bugs.freedesktop.org/show_bug.cgi?id=109290
[fdo#109291]: https://bugs.freedesktop.org/show_bug.cgi?id=109291
[fdo#109295]: https://bugs.freedesktop.org/show_bug.cgi?id=109295
[fdo#109301]: https://bugs.freedesktop.org/show_bug.cgi?id=109301
[fdo#109441]: https://bugs.freedesktop.org/show_bug.cgi?id=109441
[fdo#109502]: https://bugs.freedesktop.org/show_bug.cgi?id=109502
[fdo#109642]: https://bugs.freedesktop.org/show_bug.cgi?id=109642
[fdo#109982]: https://bugs.freedesktop.org/show_bug.cgi?id=109982
[fdo#110215]: https://bugs.freedesktop.org/show_bug.cgi?id=110215
[fdo#110281]: https://bugs.freedesktop.org/show_bug.cgi?id=110281
[fdo#99912]: https://bugs.freedesktop.org/show_bug.cgi?id=99912

Participating hosts (10 -> 6)
------------------------------

Missing (4): pig-skl-6260u shard-skl pig-hsw-4770r pig-glk-j5005

Build changes
-------------

* IGT: IGT_4951 -> IGTPW_2868
* Piglit: piglit_4509 -> None

CI_DRM_5938: 61a332623362ea87cdde81115229b1b955335654 @ git://anongit.freedesktop.org/gfx-ci/linux
IGTPW_2868: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2868/
IGT_4951: cc9a60c029432b5843724e4f2c57f9f815f7adbb @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
piglit_4509: fdc5a4ca11124ab8413c7988896eec4c97336694 @ git://anongit.freedesktop.org/piglit

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2868/
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev