tests/perf: Fix timeout for RC6 re-enabling
PATCH 1/1 tests/perf: Fix timeout for RC6 re-enabling
After closing the perf stream the parking the GPU engines may easily take more than 1 second: releasing the FD itself results in a new request submission via i915_perf_release()->i915_oa_stream_destroy()-> gen8_disable_metric_set(). That means a >1sec delay for the delayed unpark to be called due to the delay from
queue_delayed_work(retire_work, round_jiffies_up_relative(HZ))
+ the delay from
mod_delayed_work(idle_work, msecs_to_jiffies(100))
Scheduling may push this delay even further, I measured >2sec delays on my GLK. Based on this give some slack for the RC6 residency counter to change.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103179
--- tests/perf.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-)
tests/perf.c +7 -2
@@ -3591,6 +3591,7 @@ test_rc6_disable(void) };unsigned long n_events_start, n_events_end;unsigned long rc6_enabled; +int i; rc6_enabled =0 ;igt_sysfs_scanf (sysfs,"power/rc6_enable" ,"%lu" , &rc6_enabled);
@@ -3606,8 +3607,12 @@ test_rc6_disable(void)__perf_close (stream_fd); n_events_start =rc6_residency_ms (); -nanosleep (&(struct timespec ){ .tv_sec =1 , .tv_nsec =0 },NULL ); - n_events_end =rc6_residency_ms (); +for (i =0 ; i <5 ; i++) { +nanosleep (&(struct timespec ){ .tv_sec =1 , .tv_nsec =0 },NULL ); + n_events_end =rc6_residency_ms (); +if (n_events_end != n_events_start) +break ; + }igt_assert_neq (n_events_end - n_events_start,0 ); }
Signature · 6 lines
2.13.2 _______________________________________________ igt-dev mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/igt-dev
Quoting Imre Deak (2019-04-16 14:51:35)
Quoted 5 lines
After closing the perf stream the parking the GPU engines may easily take more than 1 second: releasing the FD itself results in a new request submission via i915_perf_release()->i915_oa_stream_destroy()->
gen8_disable_metric_set(). That means a >1sec delay for the delayed unpark to be called due to the delay from
igt_drop_caches_set(DROP_IDLE);
flushes the idle work handler immediately, though you will probably want DROP_ACTIVE | DROP_RETIRE to complete the picture, see gem_quiescent_gpu().
-Chris
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
Quoted 7 lines · Chris Wilson
Quoting Imre Deak (2019-04-16 14:51:35)
Quoted 5 lines
After closing the perf stream the parking the GPU engines may easily take more than 1 second: releasing the FD itself results in a new request submission via i915_perf_release()->i915_oa_stream_destroy()->
gen8_disable_metric_set(). That means a >1sec delay for the delayed unpark to be called due to the delay from
Quoted 5 lines
igt_drop_caches_set(DROP_IDLE);flushes the idle work handler immediately, though you will probably want
DROP_ACTIVE|DROP_RETIREto complete the picture, seegem_quiescent_gpu().
Thanks, seems to work, will respin with that.
--Imre
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
Quoted 8 lines · Imre Deak
After closing the perf stream the parking the GPU engines may easily take more than 1 second: releasing the FD itself results in a new request submission via i915_perf_release()->i915_oa_stream_destroy()->
gen8_disable_metric_set(). That means a >1sec delay for the delayed unpark to be called due to the delay from
queue_delayed_work(retire_work, round_jiffies_up_relative(HZ))
Quoted 7 lines
+ the delay from
mod_delayed_work(idle_work, msecs_to_jiffies(100))Scheduling may push this delay even further, I measured >2sec delays on my GLK. Based on this give some slack for the RC6 residency counter to change.
Thanks a lot for looking into this.
Whatever you do it will probably be better than the current state :)
Adding a couple of people who are also looking at fixing this test.
-Lionel
Quoted 26 lines
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103179
Cc Lionel Landwerlin <[email protected]>Cc Chris Wilson <[email protected]>Signed-off-by Imre Deak <[email protected]>--- tests/perf.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-)tests/perf.c +1
-1@@ -3591,6 +3591,7 @@ test_rc6_disable(void) };unsigned long n_events_start, n_events_end;unsigned long rc6_enabled; +int i; rc6_enabled =0 ;igt_sysfs_scanf (sysfs,"power/rc6_enable" ,"%lu" , &rc6_enabled);@@ -3606,8 +3607,12 @@ test_rc6_disable(void)__perf_close (stream_fd); n_events_start =rc6_residency_ms (); -nanosleep (&(struct timespec ){ .tv_sec =1 , .tv_nsec =0 },NULL );
tests/perf.c test_rc6_disable(void) · line 3618
Quoted 10 lines
tests/perf.c +6
-1- n_events_end =rc6_residency_ms (); +for (i =0 ; i <5 ; i++) { +nanosleep (&(struct timespec ){ .tv_sec =1 , .tv_nsec =0 },NULL ); + n_events_end =rc6_residency_ms (); +if (n_events_end != n_events_start) +break ; + }igt_assert_neq (n_events_end - n_events_start,0 ); }
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
PATCH v2 1/1 tests/perf: Fix timeout for RC6 re-enabling
In reply to Imre DeakAfter closing the perf stream the parking the GPU engines may easily take more than 1 second: releasing the FD itself results in a new request submission via i915_perf_release()->i915_oa_stream_destroy()-> gen8_disable_metric_set(). That means a >1sec delay for the delayed unpark to be called due to the delay from
queue_delayed_work(retire_work, round_jiffies_up_relative(HZ))
+ the delay from
mod_delayed_work(idle_work, msecs_to_jiffies(100))
Scheduling may push this delay even further, I measured >2sec delays on my GLK.
Fix this by calling gem_quiescent_gpu() which syncs up with the idle work, thus making sure we'll see RC6 residency afterwards.
v2:
- Use gem_quiescent_gpu() instead of increasing the timeout. (Chris)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103179
--- tests/perf.c | 1 + 1 file changed, 1 insertion(+)
tests/perf.c +1 -0
@@ -3604,6 +3604,7 @@ test_rc6_disable(void)igt_assert_eq (n_events_end - n_events_start,0 );__perf_close (stream_fd); +gem_quiescent_gpu (drm_fd); n_events_start =rc6_residency_ms ();nanosleep (&(struct timespec ){ .tv_sec =1 , .tv_nsec =0 },NULL );
Signature · 6 lines
2.13.2 _______________________________________________ igt-dev mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/igt-dev
Quoted 18 lines · Imre Deak
After closing the perf stream the parking the GPU engines may easily take more than 1 second: releasing the FD itself results in a new request submission via i915_perf_release()->i915_oa_stream_destroy()->
gen8_disable_metric_set(). That means a >1sec delay for the delayed unpark to be called due to the delay from
queue_delayed_work(retire_work, round_jiffies_up_relative(HZ))+ the delay from
mod_delayed_work(idle_work, msecs_to_jiffies(100))Scheduling may push this delay even further, I measured >2sec delays on my GLK.
Fix this by calling
gem_quiescent_gpu()which syncs up with the idle work, thus making sure we'll see RC6 residency afterwards.
Quoted 7 lines
v2:
- Usegem_quiescent_gpu()instead of increasing the timeout. (Chris)Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103179
Cc Lionel Landwerlin <[email protected]>Cc Chris Wilson <[email protected]>Signed-off-by Imre Deak <[email protected]>
Quoted 9 lines
--- tests/perf.c | 1 + 1 file changed, 1 insertion(+)tests/perf.c +0
-0
tests/perf.c test_rc6_disable(void) · line 3610
Quoted 7 lines
tests/perf.c +1
-0@@ -3604,6 +3604,7 @@ test_rc6_disable(void)igt_assert_eq (n_events_end - n_events_start,0 );__perf_close (stream_fd); +gem_quiescent_gpu (drm_fd); n_events_start =rc6_residency_ms ();nanosleep (&(struct timespec ){ .tv_sec =1 , .tv_nsec =0 },NULL );
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
Patchwork
CI[igt-dev] ✓ Fi.CI.BAT: success for tests/perf: Fix timeout for RC6 re-enabling (rev2)
In reply to Imre Deak== Series Details ==
== Series Details ==
Series: tests/perf: Fix timeout for RC6 re-enabling (rev2)
URL : https://patchwork.freedesktop.org/series/59582/
State : success
== Summary ==
CI Bug Log - changes from CI_DRM_5938 -> IGTPW_2868
====================================================
Summary
-------
**SUCCESS**
No regressions found.
External URL: https://patchwork.freedesktop.org/api/1.0/series/59582/revisions/2/mbox/
Known issues
------------
Here are the changes found in IGTPW_2868 that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@amdgpu/amd_basic@semaphore:
- fi-bdw-5557u: NOTRUN -> SKIP [fdo#109271] +38
* igt@gem_exec_suspend@basic-s3:
- fi-blb-e6850: PASS -> INCOMPLETE [fdo#107718]
* igt@i915_pm_rpm@module-reload:
- fi-skl-6770hq: PASS -> FAIL [fdo#108511]
* igt@i915_selftest@live_contexts:
- fi-bdw-gvtdvm: PASS -> DMESG-FAIL [fdo#110235 ]
* igt@kms_cursor_legacy@basic-flip-before-cursor-varying-size:
- fi-glk-dsi: PASS -> INCOMPLETE [fdo#103359] / [k.org#198133]
* igt@kms_pipe_crc_basic@nonblocking-crc-pipe-a:
- fi-byt-clapper: PASS -> FAIL [fdo#103191]
* igt@kms_psr@cursor_plane_move:
- fi-skl-6260u: NOTRUN -> SKIP [fdo#109271] +37
#### Possible fixes ####
* igt@i915_selftest@live_contexts:
- fi-skl-gvtdvm: DMESG-FAIL [fdo#110235 ] -> PASS
* igt@kms_frontbuffer_tracking@basic:
- fi-byt-clapper: FAIL [fdo#103167] -> PASS
[fdo#103167]: https://bugs.freedesktop.org/show_bug.cgi?id=103167
[fdo#103191]: https://bugs.freedesktop.org/show_bug.cgi?id=103191
[fdo#103359]: https://bugs.freedesktop.org/show_bug.cgi?id=103359
[fdo#107718]: https://bugs.freedesktop.org/show_bug.cgi?id=107718
[fdo#108511]: https://bugs.freedesktop.org/show_bug.cgi?id=108511
[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[fdo#110235 ]: https://bugs.freedesktop.org/show_bug.cgi?id=110235
[k.org#198133]: https://bugzilla.kernel.org/show_bug.cgi?id=198133
Participating hosts (47 -> 42)
------------------------------
Additional (2): fi-bdw-5557u fi-skl-6260u
Missing (7): fi-kbl-soraka fi-ilk-m540 fi-hsw-4200u fi-bsw-cyan fi-ctg-p8600 fi-icl-u3 fi-bdw-samus
Build changes
-------------
* IGT: IGT_4951 -> IGTPW_2868
CI_DRM_5938: 61a332623362ea87cdde81115229b1b955335654 @ git://anongit.freedesktop.org/gfx-ci/linux
IGTPW_2868: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2868/
IGT_4951: cc9a60c029432b5843724e4f2c57f9f815f7adbb @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2868/
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
Re: [igt-dev] ✓ Fi.CI.BAT: success for tests/perf: Fix timeout for RC6 re-enabling (rev2)
Quoted 5 lines · Patchwork
== Series Details ==
Series: tests/perf: Fix timeout for RC6 re-enabling (rev2)
URL : https://patchwork.freedesktop.org/series/59582/
State : success
Thanks for the reviews, pushed.
Quoted 77 lines
== Summary ==
CI Bug Log - changes from
CI_DRM_5938->IGTPW_2868
====================================================Summary
-------**SUCCESS**
No regressions found.
External URL: https://patchwork.freedesktop.org/api/1.0/series/59582/revisions/2/mbox/
Known issues
------------Here are the changes found in
IGTPW_2868that come from known issues:### IGT changes ###
#### Issues hit ####
* igt@amdgpu/amd_basic@semaphore:
- fi-bdw-5557u: NOTRUN -> SKIP [fdo#109271] +38* igt@gem_exec_suspend@basic-s3:
- fi-blb-e6850: PASS -> INCOMPLETE [fdo#107718]* igt@i915_pm_rpm@module-reload:
- fi-skl-6770hq: PASS -> FAIL [fdo#108511]* igt@i915_selftest@live_contexts:
- fi-bdw-gvtdvm: PASS -> DMESG-FAIL [fdo#110235 ]* igt@kms_cursor_legacy@basic-flip-before-cursor-varying-size:
- fi-glk-dsi: PASS -> INCOMPLETE [fdo#103359] / [k.org#198133]* igt@kms_pipe_crc_basic@nonblocking-crc-pipe-a:
- fi-byt-clapper: PASS -> FAIL [fdo#103191]* igt@kms_psr@cursor_plane_move:
- fi-skl-6260u: NOTRUN -> SKIP [fdo#109271] +37#### Possible fixes ####
* igt@i915_selftest@live_contexts:
- fi-skl-gvtdvm: DMESG-FAIL [fdo#110235 ] -> PASS* igt@kms_frontbuffer_tracking@basic:
- fi-byt-clapper: FAIL [fdo#103167] -> PASS[fdo#103167]: https://bugs.freedesktop.org/show_bug.cgi?id=103167
[fdo#103191]: https://bugs.freedesktop.org/show_bug.cgi?id=103191
[fdo#103359]: https://bugs.freedesktop.org/show_bug.cgi?id=103359
[fdo#107718]: https://bugs.freedesktop.org/show_bug.cgi?id=107718
[fdo#108511]: https://bugs.freedesktop.org/show_bug.cgi?id=108511
[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[fdo#110235 ]: https://bugs.freedesktop.org/show_bug.cgi?id=110235
[k.org#198133]: https://bugzilla.kernel.org/show_bug.cgi?id=198133Participating hosts (47 -> 42)
------------------------------Additional (2): fi-bdw-5557u fi-skl-6260u
Missing (7): fi-kbl-soraka fi-ilk-m540 fi-hsw-4200u fi-bsw-cyan fi-ctg-p8600 fi-icl-u3 fi-bdw-samusBuild changes
-------------* IGT:
IGT_4951->IGTPW_2868
Quoted 7 lines
CI_DRM_5938:61a332623362ea87cdde81115229b1b955335654@git://anongit.freedesktop.org/gfx-ci/linux
IGTPW_2868: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2868/
IGT_4951:cc9a60c029432b5843724e4f2c57f9f815f7adbb@git://anongit.freedesktop.org/xorg/app/intel-gpu-tools== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2868/
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
Patchwork
CI[igt-dev] ✓ Fi.CI.IGT: success for tests/perf: Fix timeout for RC6 re-enabling (rev2)
In reply to Imre Deak== Series Details ==
== Series Details ==
Series: tests/perf: Fix timeout for RC6 re-enabling (rev2)
URL : https://patchwork.freedesktop.org/series/59582/
State : success
== Summary ==
CI Bug Log - changes from CI_DRM_5938_full -> IGTPW_2868_full
====================================================
Summary
-------
**SUCCESS**
No regressions found.
External URL: https://patchwork.freedesktop.org/api/1.0/series/59582/revisions/2/mbox/
Known issues
------------
Here are the changes found in IGTPW_2868_full that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@gem_eio@in-flight-suspend:
- shard-apl: PASS -> DMESG-WARN [fdo#108566] +5
* igt@gem_exec_parallel@bsd2-fds:
- shard-iclb: NOTRUN -> SKIP [fdo#109276] +12
* igt@gem_userptr_blits@coherency-sync:
- shard-iclb: NOTRUN -> SKIP [fdo#109290]
* igt@i915_pm_lpsp@edp-native:
- shard-iclb: NOTRUN -> SKIP [fdo#109301]
* igt@i915_suspend@fence-restore-tiled2untiled:
- shard-kbl: PASS -> INCOMPLETE [fdo#103665]
* igt@kms_atomic_transition@3x-modeset-transitions-nonblocking-fencing:
- shard-snb: NOTRUN -> SKIP [fdo#109271] / [fdo#109278] +2
* igt@kms_atomic_transition@6x-modeset-transitions:
- shard-iclb: NOTRUN -> SKIP [fdo#109278] +11
* igt@kms_chamelium@hdmi-crc-planes-random:
- shard-iclb: NOTRUN -> SKIP [fdo#109284] +4
* igt@kms_color@pipe-b-degamma:
- shard-iclb: NOTRUN -> FAIL [fdo#104782] +1
* igt@kms_cursor_crc@cursor-512x170-onscreen:
- shard-iclb: NOTRUN -> SKIP [fdo#109279]
* igt@kms_cursor_legacy@2x-long-cursor-vs-flip-atomic:
- shard-hsw: PASS -> FAIL [fdo#105767]
* igt@kms_cursor_legacy@2x-long-flip-vs-cursor-atomic:
- shard-glk: PASS -> FAIL [fdo#104873]
* igt@kms_cursor_legacy@cursora-vs-flipb-varying-size:
- shard-iclb: NOTRUN -> SKIP [fdo#109274] +10
* igt@kms_flip@2x-flip-vs-expired-vblank:
- shard-glk: PASS -> FAIL [fdo#105363]
* igt@kms_force_connector_basic@prune-stale-modes:
- shard-iclb: NOTRUN -> SKIP [fdo#109285]
* igt@kms_frontbuffer_tracking@fbc-1p-primscrn-cur-indfb-draw-render:
- shard-apl: PASS -> FAIL [fdo#103167]
- shard-kbl: PASS -> FAIL [fdo#103167]
* igt@kms_frontbuffer_tracking@fbc-1p-primscrn-pri-shrfb-draw-pwrite:
- shard-iclb: PASS -> FAIL [fdo#103167] +3
* igt@kms_frontbuffer_tracking@fbc-2p-primscrn-pri-shrfb-draw-blt:
- shard-glk: PASS -> FAIL [fdo#103167]
* igt@kms_frontbuffer_tracking@fbc-2p-scndscrn-spr-indfb-draw-mmap-gtt:
- shard-iclb: NOTRUN -> SKIP [fdo#109280] +26
* igt@kms_frontbuffer_tracking@fbcpsr-1p-primscrn-pri-indfb-draw-blt:
- shard-iclb: PASS -> FAIL [fdo#109247] +15
* igt@kms_frontbuffer_tracking@psr-2p-scndscrn-cur-indfb-onoff:
- shard-kbl: NOTRUN -> SKIP [fdo#109271] +2
* igt@kms_frontbuffer_tracking@psr-2p-scndscrn-indfb-msflip-blt:
- shard-snb: NOTRUN -> SKIP [fdo#109271] +38
* igt@kms_lease@page_flip_implicit_plane:
- shard-iclb: NOTRUN -> FAIL [fdo#110281]
* igt@kms_plane_scaling@pipe-b-scaler-with-rotation:
- shard-iclb: NOTRUN -> FAIL [fdo#109052]
* igt@kms_psr2_su@page_flip:
- shard-iclb: PASS -> SKIP [fdo#109642]
* igt@kms_psr@basic:
- shard-iclb: PASS -> FAIL [fdo#107383] / [fdo#110215]
* igt@kms_psr@psr2_cursor_mmap_cpu:
- shard-iclb: PASS -> SKIP [fdo#109441] +2
* igt@kms_psr@psr2_primary_mmap_gtt:
- shard-iclb: NOTRUN -> SKIP [fdo#109441] +2
* igt@kms_psr@sprite_mmap_gtt:
- shard-iclb: NOTRUN -> FAIL [fdo#107383] / [fdo#110215] +2
* igt@kms_rotation_crc@multiplane-rotation-cropping-top:
- shard-kbl: PASS -> FAIL [fdo#109016]
* igt@kms_vrr@flip-basic:
- shard-iclb: NOTRUN -> SKIP [fdo#109502]
* igt@perf@per-context-mode-unprivileged:
- shard-iclb: NOTRUN -> SKIP [fdo#109289] +1
* igt@perf_pmu@rc6:
- shard-kbl: PASS -> SKIP [fdo#109271]
* igt@prime_nv_pcopy@test3_2:
- shard-iclb: NOTRUN -> SKIP [fdo#109291] +2
* igt@prime_vgem@fence-flip-hang:
- shard-iclb: NOTRUN -> SKIP [fdo#109295]
#### Possible fixes ####
* igt@gem_tiled_swapping@non-threaded:
- shard-snb: FAIL [fdo#108686] -> PASS
* igt@gem_workarounds@suspend-resume:
- shard-apl: DMESG-WARN [fdo#108566] -> PASS +6
* igt@i915_pm_rc6_residency@rc6-accuracy:
- shard-snb: SKIP [fdo#109271] -> PASS
* igt@i915_pm_rpm@i2c:
- shard-iclb: DMESG-WARN [fdo#109982] -> PASS
* igt@kms_cursor_crc@cursor-128x42-sliding:
- shard-iclb: INCOMPLETE -> PASS
* igt@kms_frontbuffer_tracking@fbcpsr-1p-offscren-pri-indfb-draw-blt:
- shard-iclb: FAIL [fdo#109247] -> PASS +12
* igt@kms_frontbuffer_tracking@fbcpsr-1p-pri-indfb-multidraw:
- shard-iclb: FAIL [fdo#103167] -> PASS +4
* igt@kms_pipe_crc_basic@suspend-read-crc-pipe-a:
- shard-kbl: INCOMPLETE [fdo#103665] -> PASS
* igt@kms_plane_scaling@pipe-a-scaler-with-pixel-format:
- shard-glk: SKIP [fdo#109271] / [fdo#109278] -> PASS
* igt@kms_psr2_su@frontbuffer:
- shard-iclb: SKIP [fdo#109642] -> PASS
* igt@kms_psr@psr2_cursor_blt:
- shard-iclb: SKIP [fdo#109441] -> PASS
* igt@kms_psr@sprite_render:
- shard-iclb: FAIL [fdo#107383] / [fdo#110215] -> PASS +2
* igt@kms_rotation_crc@multiplane-rotation-cropping-bottom:
- shard-kbl: DMESG-FAIL [fdo#105763] -> PASS
* igt@kms_setmode@basic:
- shard-kbl: FAIL [fdo#99912] -> PASS
* igt@perf@oa-exponents:
- shard-glk: FAIL [fdo#105483] -> PASS
[fdo#103167]: https://bugs.freedesktop.org/show_bug.cgi?id=103167
[fdo#103665]: https://bugs.freedesktop.org/show_bug.cgi?id=103665
[fdo#104782]: https://bugs.freedesktop.org/show_bug.cgi?id=104782
[fdo#104873]: https://bugs.freedesktop.org/show_bug.cgi?id=104873
[fdo#105363]: https://bugs.freedesktop.org/show_bug.cgi?id=105363
[fdo#105483]: https://bugs.freedesktop.org/show_bug.cgi?id=105483
[fdo#105763]: https://bugs.freedesktop.org/show_bug.cgi?id=105763
[fdo#105767]: https://bugs.freedesktop.org/show_bug.cgi?id=105767
[fdo#107383]: https://bugs.freedesktop.org/show_bug.cgi?id=107383
[fdo#108566]: https://bugs.freedesktop.org/show_bug.cgi?id=108566
[fdo#108686]: https://bugs.freedesktop.org/show_bug.cgi?id=108686
[fdo#109016]: https://bugs.freedesktop.org/show_bug.cgi?id=109016
[fdo#109052]: https://bugs.freedesktop.org/show_bug.cgi?id=109052
[fdo#109247]: https://bugs.freedesktop.org/show_bug.cgi?id=109247
[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[fdo#109274]: https://bugs.freedesktop.org/show_bug.cgi?id=109274
[fdo#109276]: https://bugs.freedesktop.org/show_bug.cgi?id=109276
[fdo#109278]: https://bugs.freedesktop.org/show_bug.cgi?id=109278
[fdo#109279]: https://bugs.freedesktop.org/show_bug.cgi?id=109279
[fdo#109280]: https://bugs.freedesktop.org/show_bug.cgi?id=109280
[fdo#109284]: https://bugs.freedesktop.org/show_bug.cgi?id=109284
[fdo#109285]: https://bugs.freedesktop.org/show_bug.cgi?id=109285
[fdo#109289]: https://bugs.freedesktop.org/show_bug.cgi?id=109289
[fdo#109290]: https://bugs.freedesktop.org/show_bug.cgi?id=109290
[fdo#109291]: https://bugs.freedesktop.org/show_bug.cgi?id=109291
[fdo#109295]: https://bugs.freedesktop.org/show_bug.cgi?id=109295
[fdo#109301]: https://bugs.freedesktop.org/show_bug.cgi?id=109301
[fdo#109441]: https://bugs.freedesktop.org/show_bug.cgi?id=109441
[fdo#109502]: https://bugs.freedesktop.org/show_bug.cgi?id=109502
[fdo#109642]: https://bugs.freedesktop.org/show_bug.cgi?id=109642
[fdo#109982]: https://bugs.freedesktop.org/show_bug.cgi?id=109982
[fdo#110215]: https://bugs.freedesktop.org/show_bug.cgi?id=110215
[fdo#110281]: https://bugs.freedesktop.org/show_bug.cgi?id=110281
[fdo#99912]: https://bugs.freedesktop.org/show_bug.cgi?id=99912
Participating hosts (10 -> 6)
------------------------------
Missing (4): pig-skl-6260u shard-skl pig-hsw-4770r pig-glk-j5005
Build changes
-------------
* IGT: IGT_4951 -> IGTPW_2868
* Piglit: piglit_4509 -> None
CI_DRM_5938: 61a332623362ea87cdde81115229b1b955335654 @ git://anongit.freedesktop.org/gfx-ci/linux
IGTPW_2868: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2868/
IGT_4951: cc9a60c029432b5843724e4f2c57f9f815f7adbb @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
piglit_4509: fdc5a4ca11124ab8413c7988896eec4c97336694 @ git://anongit.freedesktop.org/piglit
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2868/
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev