Add Beelink GS1 Board
Subsystems (5)
v3 cover Add Beelink GS1 Board
This serie introduce the Beelink GS1 board with a patch for the reset on Allwinner H6.
The first patch has been submitted but is still not merged. But it's required for this series
Thanks to Jagan Teki most of the Beelink GS1 device-tree is taken from the Orange Pi boards.
Changes with v2:
- Add myself in sunxi MAINTAINERS file
- Update with Jagan Teki's rsync patch
- Change to complete DTS same as linux
- Add linux sha1 to the commit log
Changes with v1:
- Add bus-width for mmc2 node
- Add sha1 in the sync dts commit
Clément Péron (2):
arm: dts: h6: Add Beelink GS1 initial support
arm: sunxi: h6: fix reset using r_wdog
Jagan Teki (1):
arm64: allwinner: sun50i: Sync H6 dts(i) files from Linux
arch/arm/dts/Makefile | 1 + arch/arm/dts/sun50i-h6-beelink-gs1.dts | 260 ++++++++++++ arch/arm/dts/sun50i-h6-orangepi.dtsi | 62 ++- arch/arm/dts/sun50i-h6-pine-h64.dts | 88 +++- arch/arm/dts/sun50i-h6.dtsi | 398 +++++++++++++++++- .../include/asm/arch-sunxi/cpu_sun50i_h6.h | 1 + arch/arm/mach-sunxi/board.c | 9 +- board/sunxi/MAINTAINERS | 6 + configs/beelink_gs1_defconfig | 15 + include/dt-bindings/clock/sun8i-tcon-top.h | 11 + 10 files changed, 828 insertions(+), 23 deletions(-) create mode 100644 arch/arm/dts/sun50i-h6-beelink-gs1.dts create mode 100644 configs/beelink_gs1_defconfig create mode 100644 include/dt-bindings/clock/sun8i-tcon-top.h
Signature · 1 line
2.17.1
PATCH v3 1/3 arm64: allwinner: sun50i: Sync H6 dts(i) files from Linux
From: Jagan Teki <[email protected]>
Usually the Linux dts changes were synced in specific tags in Allwinner, to keep track for whats been synced so-far and plan for future syncs.
But this patch sync sun50i-h6* dts(i) files from Linux w/o any specific tag since these dts(i) changes are required for new H6 boards support.
Linux commit details about the sun50i-h6* sync:
"arm64: dts: allwinner: h6: move MMC pinctrl to dtsi" (sha1: 6ba2e45d57afdfd982d12f168edd6a79a65075d8)
Linux commit details about the sun8i-tcon-top.h sync:
"dt-bindings: display: sunxi-drm: Add TCON TOP description" (sha1: 59a9c39544cd1e5952c2a33028d71aa8180648f8)
Part of the sync initiated by 'Clément Péron'.
--- arch/arm/dts/sun50i-h6-orangepi.dtsi | 62 +++- arch/arm/dts/sun50i-h6-pine-h64.dts | 88 ++++- arch/arm/dts/sun50i-h6.dtsi | 398 ++++++++++++++++++++- include/dt-bindings/clock/sun8i-tcon-top.h | 11 + 4 files changed, 538 insertions(+), 21 deletions(-) create mode 100644 include/dt-bindings/clock/sun8i-tcon-top.h
arch/arm/dts/sun50i-h6-orangepi.dtsi +60 -2
@@ -21,17 +21,55 @@ chosen { stdout-path = "serial0:115200n8"; }; + + leds { + compatible = "gpio-leds"; + + power { + label = "orangepi:red:power"; + gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */ + default-state = "on"; + }; + + status { + label = "orangepi:green:status"; + gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */ + }; + }; + + reg_vcc5v: vcc5v { + /* board wide 5V supply directly from the DC jack */ + compatible = "regulator-fixed"; + regulator-name = "vcc-5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci3 { + status = "okay"; }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins>; vmmc-supply = <®_cldo1>; cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; bus-width = <4>; status = "okay"; }; +&ohci0 { + status = "okay"; +}; + +&ohci3 { + status = "okay"; +}; + &r_i2c { status = "okay";
@@ -43,6 +81,14 @@ interrupt-controller; #interrupt-cells = <1>; x-powers,self-working-mode; + vina-supply = <®_vcc5v>; + vinb-supply = <®_vcc5v>; + vinc-supply = <®_vcc5v>; + vind-supply = <®_vcc5v>; + vine-supply = <®_vcc5v>; + aldoin-supply = <®_vcc5v>; + bldoin-supply = <®_vcc5v>; + cldoin-supply = <®_vcc5v>; regulators { reg_aldo1: aldo1 {
@@ -148,3 +194,15 @@ pinctrl-0 = <&uart0_ph_pins>; status = "okay"; }; + +&usb2otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usb2phy { + usb0_id_det-gpios = <&pio 2 6 GPIO_ACTIVE_HIGH>; /* PC6 */ + usb0_vbus-supply = <®_vcc5v>; + usb3_vbus-supply = <®_vcc5v>; + status = "okay"; +};
arch/arm/dts/sun50i-h6-pine-h64.dts +84 -4
128 lines not on this page · raw message
arch/arm/dts/sun50i-h6.dtsi +383 -15
489 lines not on this page · raw message
include/dt-bindings/clock/sun8i-tcon-top.h new file +11 -0
@@ -0,0 +1,11 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ +/* Copyright (C) 2018 Jernej Skrabec <[email protected]> */ + +#ifndef _DT_BINDINGS_CLOCK_SUN8I_TCON_TOP_H_ +#define _DT_BINDINGS_CLOCK_SUN8I_TCON_TOP_H_ + +#define CLK_TCON_TOP_TV0 0 +#define CLK_TCON_TOP_TV1 1 +#define CLK_TCON_TOP_DSI 2 + +#endif /* _DT_BINDINGS_CLOCK_SUN8I_TCON_TOP_H_ */
Signature · 1 line
2.17.1
PATCH v3 2/3 arm: dts: h6: Add Beelink GS1 initial support
In reply to Clément PéronBeelink GS1 is an Allwinner H6 based TV box,
which support:
- Allwinner H6 Quad-core 64-bit ARM Cortex-A53
- GPU Mali-T720
- 2GB LPDDR3 RAM
- 16GB eMMC
- AXP805 PMIC
- 1Gbps GMAC via RTL8211E
- USB 2.0 and 3.0 Host
- HDMI port
- S/PDIF port
- 5V/2A DC power supply
- Wi-Fi/BT via Fn-Link 6222B-SRB (RTL8222BS)
Introduced in Linux with commit :089bee8dd119 arm64: dts: allwinner: h6: Introduce Beelink GS1 board
--- arch/arm/dts/Makefile | 1 + arch/arm/dts/sun50i-h6-beelink-gs1.dts | 260 +++++++++++++++++++++++++ board/sunxi/MAINTAINERS | 6 + configs/beelink_gs1_defconfig | 15 ++ 4 files changed, 282 insertions(+) create mode 100644 arch/arm/dts/sun50i-h6-beelink-gs1.dts create mode 100644 configs/beelink_gs1_defconfig
arch/arm/dts/Makefile +1 -0
@@ -469,6 +469,7 @@ dtb-$(CONFIG_MACH_SUN50I_H5) += \ sun50i-h5-orangepi-prime.dtb \ sun50i-h5-orangepi-zero-plus2.dtb dtb-$(CONFIG_MACH_SUN50I_H6) += \ + sun50i-h6-beelink-gs1.dtb \ sun50i-h6-orangepi-lite2.dtb \ sun50i-h6-orangepi-one-plus.dtb \ sun50i-h6-pine-h64.dtb
arch/arm/dts/sun50i-h6-beelink-gs1.dts new file +260 -0
260 lines not on this page · raw message
board/sunxi/MAINTAINERS +6 -0
@@ -166,6 +166,12 @@ M: Jagan Teki <[email protected]> S: Maintained F: configs/bananapi_m64_defconfig +BEELINK GS1 +M: Clément Péron <[email protected]> +S: Maintained +F: configs/beelink_gs1_defconfig +F: arch/arm/dts/sun50i-h6-beelink-gs1.dts + COLOMBUS BOARD M: Maxime Ripard <[email protected]> S: Maintained
configs/beelink_gs1_defconfig new file +15 -0
@@ -0,0 +1,15 @@ +CONFIG_ARM=y +CONFIG_ARCH_SUNXI=y +CONFIG_SPL=y +CONFIG_MACH_SUN50I_H6=y +CONFIG_MMC0_CD_PIN="PF6" +CONFIG_MMC_SUNXI_SLOT_EXTRA=2 +# CONFIG_PSCI_RESET is not set +CONFIG_NR_DRAM_BANKS=1 +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_SPL_DOS_PARTITION is not set +# CONFIG_SPL_EFI_PARTITION is not set +CONFIG_DEFAULT_DEVICE_TREE="sun50i-h6-beelink-gs1" +CONFIG_LED=y +CONFIG_LED_GPIO=y
Signature · 1 line
2.17.1
PATCH v3 2/3 arm: dts: h6: Add Beelink GS1 initial support
Quoted 15 lines · Clément Péron
Beelink GS1 is an Allwinner H6 based TV box,
which support:
- Allwinner H6 Quad-core 64-bit ARM Cortex-A53
- GPU Mali-T720
- 2GB LPDDR3 RAM
- 16GB eMMC
- AXP805 PMIC
- 1Gbps GMAC via RTL8211E
- USB 2.0 and 3.0 Host
- HDMI port
- S/PDIF port
- 5V/2A DC power supply
- Wi-Fi/BT via Fn-Link 6222B-SRB (RTL8222BS)
Quoted 5 lines
Introduced in Linux with commit :
089bee8dd119arm64: dts: allwinner: h6: Introduce Beelink GS1 boardSigned-off-by Clément Péron <[email protected]>---
With simple edit on commit message and
Applied to u-boot-sunxi/master
PATCH v3 3/3 arm: sunxi: h6: fix reset using r_wdog
In reply to Clément PéronWDOG is broken for some H6 rev. The board is not
reseted correctly.
Use the R_WDOG instead.
--- arch/arm/include/asm/arch-sunxi/cpu_sun50i_h6.h | 1 + arch/arm/mach-sunxi/board.c | 9 +++++++-- 2 files changed, 8 insertions(+), 2 deletions(-)
arch/arm/include/asm/arch-sunxi/cpu_sun50i_h6.h +1 -0
@@ -60,6 +60,7 @@#define SUNXI_RTC_BASE 0x07000000#define SUNXI_R_CPUCFG_BASE 0x07000400#define SUNXI_PRCM_BASE 0x07010000 +#define SUNXI_R_WDOG_BASE 0x07020400#define SUNXI_R_PIO_BASE 0x07022000#define SUNXI_R_UART_BASE 0x07080000#define SUNXI_R_TWI_BASE 0x07081400
arch/arm/mach-sunxi/board.c +7 -2
@@ -289,9 +289,14 @@ void reset_cpu(ulong addr) writel(WDT_MODE_RESET_EN | WDT_MODE_EN, &wdog->mode); }#elif defined(CONFIG_SUNXI_GEN_SUN6I) || defined(CONFIG_MACH_SUN50I_H6) +#if defined(CONFIG_MACH_SUN50I_H6 ) +/* WDOG is broken for some H6 rev. use the R_WDOG instead */ static const struct sunxi_wdog *wdog = - ((struct sunxi_timer_reg *)SUNXI_TIMER_BASE )->wdog; - + (struct sunxi_wdog *)SUNXI_R_WDOG_BASE ; +#else +static const struct sunxi_wdog *wdog = + ((struct sunxi_timer_reg *)SUNXI_TIMER_BASE )->wdog; +#endif /* Set the watchdog for its shortest interval (.5s) and wait */ writel (WDT_CFG_RESET , &wdog->cfg);writel (WDT_MODE_EN , &wdog->mode);
Signature · 1 line
2.17.1
PATCH v3 3/3 arm: sunxi: h6: fix reset using r_wdog
Hi,
+Chen-Yu Tsai for test and +Icenowy because she try to contact AW about this issue.
Quoted 5 lines · Clément Péron
WDOG is broken for some H6 rev. The board is not
reseted correctly.Use the
R_WDOGinstead.
The issue is real except on Pine H64 and Rongpin RP-H6B which seems to be NOT affected.
Lot of users on OrangePi boards (Lite2 / One Plus and 3) are complaining about this issue.
We perform a simple watchdog test on different board :
Chen-Yu Tsai :
Pine h64 = H6 V200-AWIN H6448BA 7782 => OK
OrangePi Lite 2 = H6 V200-AWIN H8068BA 61C2 => KO
Martin Ayotte :
PineH64 = H8069BA 6892 => OK
Orange Pi 3 = HA047BA 69W2 => KO
OPiOnePlus = H7310BA 6842 => KO
OPiLite2 = H6448BA 6662 => KO
Clément Péron:
Beelink GS1 = H6 V200-AWIN H7309BA 6842 => KO
After the series of result, Icenowy try to reach Allwinner about this issue but they seems not interested to investigate it.
I'm not sure if it's an HW errata or if there something misconfigured but the result is here WDOG doesn't make these boards reboot. And this should not happens !
As we don't have the ARIS co proc to do power management and watchdog is the only solution to reset the board for now.
A really simple change from Watchdog to R_Watchdog fix the issue and has been tested on several boards.
Patch is already applied on Armbian.
Thanks,
Clément
Quoted 43 lines
Signed-off-by Clément Péron <[email protected]>--- arch/arm/include/asm/arch-sunxi/cpu_sun50i_h6.h | 1 + arch/arm/mach-sunxi/board.c | 9 +++++++-- 2 files changed, 8 insertions(+), 2 deletions(-)arch/arm/include/asm/arch-sunxi/cpu_sun50i_h6.h +1
-0@@ -60,6 +60,7 @@#define SUNXI_RTC_BASE 0x07000000#define SUNXI_R_CPUCFG_BASE 0x07000400#define SUNXI_PRCM_BASE 0x07010000 +#define SUNXI_R_WDOG_BASE 0x07020400#define SUNXI_R_PIO_BASE 0x07022000#define SUNXI_R_UART_BASE 0x07080000#define SUNXI_R_TWI_BASE 0x07081400arch/arm/mach-sunxi/board.c +7
-3@@ -289,9 +289,14 @@ void reset_cpu(ulong addr) writel(WDT_MODE_RESET_EN | WDT_MODE_EN, &wdog->mode); }#elif defined(CONFIG_SUNXI_GEN_SUN6I) || defined(CONFIG_MACH_SUN50I_H6) +#if defined(CONFIG_MACH_SUN50I_H6 ) +/* WDOG is broken for some H6 rev. use the R_WDOG instead */ static const struct sunxi_wdog *wdog = - ((struct sunxi_timer_reg *)SUNXI_TIMER_BASE )->wdog; - + (struct sunxi_wdog *)SUNXI_R_WDOG_BASE ; +#else +static const struct sunxi_wdog *wdog = + ((struct sunxi_timer_reg *)SUNXI_TIMER_BASE )->wdog; +#endif /* Set the watchdog for its shortest interval (.5s) and wait */ writel (WDT_CFG_RESET , &wdog->cfg);writel (WDT_MODE_EN , &wdog->mode); --2.17.1
PATCH v3 3/3 arm: sunxi: h6: fix reset using r_wdog
Quoted 33 lines · Clément Péron
Hi,
+Chen-Yu Tsai for test and +Icenowy because she try to contact AW about this issue.
Quoted 5 lines · Clément Péron
WDOG is broken for some H6 rev. The board is not
reseted correctly.Use the
R_WDOGinstead.The issue is real except on Pine H64 and Rongpin RP-H6B which seems to be NOT affected.
Lot of users on OrangePi boards (Lite2 / One Plus and 3) are complaining about this issue.We perform a simple watchdog test on different board :
Chen-Yu Tsai :
Pine h64 = H6 V200-AWIN H6448BA 7782 => OK
OrangePi Lite 2 = H6 V200-AWIN H8068BA 61C2 => KOMartin Ayotte :
PineH64 = H8069BA 6892 => OK
Orange Pi 3 = HA047BA 69W2 => KO
OPiOnePlus = H7310BA 6842 => KO
OPiLite2 = H6448BA 6662 => KOClément Péron:
Beelink GS1 = H6 V200-AWIN H7309BA 6842 => KO
Quoted 6 lines
After the series of result, Icenowy try to reach Allwinner about this issue but they seems not interested to investigate it.
I'm not sure if it's an HW errata or if there something misconfigured but the result is here WDOG doesn't make these boards reboot. And this should not happens !
How about Linux? same issue.
PATCH v3 3/3 arm: sunxi: h6: fix reset using r_wdog
Hi,
Quoted 35 lines · Jagan Teki
Quoted 33 lines · Clément Péron
Hi,
+Chen-Yu Tsai for test and +Icenowy because she try to contact AW about this issue.
Quoted 5 lines · Clément Péron
WDOG is broken for some H6 rev. The board is not
reseted correctly.Use the
R_WDOGinstead.The issue is real except on Pine H64 and Rongpin RP-H6B which seems to be NOT affected.
Lot of users on OrangePi boards (Lite2 / One Plus and 3) are complaining about this issue.We perform a simple watchdog test on different board :
Chen-Yu Tsai :
Pine h64 = H6 V200-AWIN H6448BA 7782 => OK
OrangePi Lite 2 = H6 V200-AWIN H8068BA 61C2 => KOMartin Ayotte :
PineH64 = H8069BA 6892 => OK
Orange Pi 3 = HA047BA 69W2 => KO
OPiOnePlus = H7310BA 6842 => KO
OPiLite2 = H6448BA 6662 => KOClément Péron:
Beelink GS1 = H6 V200-AWIN H7309BA 6842 => KO
Quoted 8 lines
Quoted 6 lines
After the series of result, Icenowy try to reach Allwinner about this issue but they seems not interested to investigate it.
I'm not sure if it's an HW errata or if there something misconfigured but the result is here WDOG doesn't make these boards reboot. And this should not happens !
How about Linux? same issue.
Yes, Linux use PSCI, call ATF and we have the same issue as ATF use the watchdog to reboot.
Clement
PATCH v3 3/3 arm: sunxi: h6: fix reset using r_wdog
Hi Jagan,
FYI the patch on ATF has been merged just now. It has been tested by André Przywara on A64, H5 and H6.
https://github.com/ARM-software/arm-trusted-firmware/commit/523ab5be1a84e9aa15fb62c3a15a6338b01d3961
Thanks,
Clement
Quoted 51 lines · Clément Péron
Hi,
Quoted 35 lines · Jagan Teki
Quoted 33 lines · Clément Péron
Hi,
+Chen-Yu Tsai for test and +Icenowy because she try to contact AW about this issue.
Quoted 5 lines · Clément Péron
WDOG is broken for some H6 rev. The board is not
reseted correctly.Use the
R_WDOGinstead.The issue is real except on Pine H64 and Rongpin RP-H6B which seems to be NOT affected.
Lot of users on OrangePi boards (Lite2 / One Plus and 3) are complaining about this issue.We perform a simple watchdog test on different board :
Chen-Yu Tsai :
Pine h64 = H6 V200-AWIN H6448BA 7782 => OK
OrangePi Lite 2 = H6 V200-AWIN H8068BA 61C2 => KOMartin Ayotte :
PineH64 = H8069BA 6892 => OK
Orange Pi 3 = HA047BA 69W2 => KO
OPiOnePlus = H7310BA 6842 => KO
OPiLite2 = H6448BA 6662 => KOClément Péron:
Beelink GS1 = H6 V200-AWIN H7309BA 6842 => KOQuoted 8 lines
Quoted 6 lines
After the series of result, Icenowy try to reach Allwinner about this issue but they seems not interested to investigate it.
I'm not sure if it's an HW errata or if there something misconfigured but the result is here WDOG doesn't make these boards reboot. And this should not happens !
How about Linux? same issue.
Yes, Linux use PSCI, call ATF and we have the same issue as ATF use the watchdog to reboot.
Clement
PATCH v3 3/3 arm: sunxi: h6: fix reset using r_wdog
Hi Jagan,
Is there anything you need to merge this patch?
Thanks,
Clément
Quoted 63 lines · Clément Péron
Hi Jagan,
FYI the patch on ATF has been merged just now. It has been tested by André Przywara on A64, H5 and H6.
https://github.com/ARM-software/arm-trusted-firmware/commit/523ab5be1a84e9aa15fb62c3a15a6338b01d3961
Thanks,
ClementQuoted 51 lines · Clément Péron
Hi,
Quoted 35 lines · Jagan Teki
Quoted 33 lines · Clément Péron
Hi,
+Chen-Yu Tsai for test and +Icenowy because she try to contact AW about this issue.
Quoted 5 lines · Clément Péron
WDOG is broken for some H6 rev. The board is not
reseted correctly.Use the
R_WDOGinstead.The issue is real except on Pine H64 and Rongpin RP-H6B which seems to be NOT affected.
Lot of users on OrangePi boards (Lite2 / One Plus and 3) are complaining about this issue.We perform a simple watchdog test on different board :
Chen-Yu Tsai :
Pine h64 = H6 V200-AWIN H6448BA 7782 => OK
OrangePi Lite 2 = H6 V200-AWIN H8068BA 61C2 => KOMartin Ayotte :
PineH64 = H8069BA 6892 => OK
Orange Pi 3 = HA047BA 69W2 => KO
OPiOnePlus = H7310BA 6842 => KO
OPiLite2 = H6448BA 6662 => KOClément Péron:
Beelink GS1 = H6 V200-AWIN H7309BA 6842 => KOQuoted 8 lines
Quoted 6 lines
After the series of result, Icenowy try to reach Allwinner about this issue but they seems not interested to investigate it.
I'm not sure if it's an HW errata or if there something misconfigured but the result is here WDOG doesn't make these boards reboot. And this should not happens !
How about Linux? same issue.
Yes, Linux use PSCI, call ATF and we have the same issue as ATF use the watchdog to reboot.
Clement
[U-Boot] [linux-sunxi] Re: [PATCH v3 3/3] arm: sunxi: h6: fix reset using r_wdog
In reply to Clément PéronQuoted 42 lines · Clément Péron
Hi,
Quoted 38 lines · Jagan Teki
Quoted 36 lines · Clément Péron
Hi,
+Chen-Yu Tsai for test and +Icenowy because she try to contact AW about this issue.
Quoted 5 lines · Clément Péron
WDOG is broken for some H6 rev. The board is not
reseted correctly.Use the
R_WDOGinstead.The issue is real except on Pine H64 and Rongpin RP-H6B which seems to be NOT affected.
Lot of users on OrangePi boards (Lite2 / One Plus and 3) are complaining about this issue.We perform a simple watchdog test on different board :
Chen-Yu Tsai :
Pine h64 = H6 V200-AWIN H6448BA 7782 => OK
OrangePi Lite 2 = H6 V200-AWIN H8068BA 61C2 => KOMartin Ayotte :
PineH64 = H8069BA 6892 => OK
Orange Pi 3 = HA047BA 69W2 => KO
OPiOnePlus = H7310BA 6842 => KO
OPiLite2 = H6448BA 6662 => KOClément Péron:
Beelink GS1 = H6 V200-AWIN H7309BA 6842 => KOAfter the series of result, Icenowy try to reach Allwinner about this issue but they seems not interested to investigate it.
Quoted 7 lines
Quoted 5 lines
Quoted 3 lines
I'm not sure if it's an HW errata or if there something misconfigured but the result is here WDOG doesn't make these boards reboot. And this should not happens !
How about Linux? same issue.
Yes, Linux use PSCI, call ATF and we have the same issue as ATF use the watchdog to reboot.
There is an RFC for watchdog, can you have any change to add reset_cpu via that driver (ofcourse it's a rework)?
[U-Boot] [linux-sunxi] Re: [PATCH v3 3/3] arm: sunxi: h6: fix reset using r_wdog
Quoted 44 lines · Jagan Teki
Quoted 42 lines · Clément Péron
Hi,
Quoted 38 lines · Jagan Teki
Quoted 36 lines · Clément Péron
Hi,
+Chen-Yu Tsai for test and +Icenowy because she try to contact AW about this issue.
Quoted 5 lines · Clément Péron
WDOG is broken for some H6 rev. The board is not
reseted correctly.Use the
R_WDOGinstead.The issue is real except on Pine H64 and Rongpin RP-H6B which seems to be NOT affected.
Lot of users on OrangePi boards (Lite2 / One Plus and 3) are complaining about this issue.We perform a simple watchdog test on different board :
Chen-Yu Tsai :
Pine h64 = H6 V200-AWIN H6448BA 7782 => OK
OrangePi Lite 2 = H6 V200-AWIN H8068BA 61C2 => KOMartin Ayotte :
PineH64 = H8069BA 6892 => OK
Orange Pi 3 = HA047BA 69W2 => KO
OPiOnePlus = H7310BA 6842 => KO
OPiLite2 = H6448BA 6662 => KOClément Péron:
Beelink GS1 = H6 V200-AWIN H7309BA 6842 => KOAfter the series of result, Icenowy try to reach Allwinner about this issue but they seems not interested to investigate it.
Quoted 8 lines
Quoted 7 lines
Quoted 5 lines
Quoted 3 lines
I'm not sure if it's an HW errata or if there something misconfigured but the result is here WDOG doesn't make these boards reboot. And this should not happens !
How about Linux? same issue.
Yes, Linux use PSCI, call ATF and we have the same issue as ATF use the watchdog to reboot.
Hi,
Quoted 2 lines
There is an RFC for watchdog, can you have any change to add
reset_cpuvia that driver (ofcourse it's a rework)?
It's indeed a more proper way but it's a different work. I'm only trying to fix the reboot issue on some H6 boards. Moreover modifying this part will require some testing on different Allwinner boards that I don't have.
Thanks,
Clement
[U-Boot] [linux-sunxi] Re: [PATCH v3 3/3] arm: sunxi: h6: fix reset using r_wdog
Quoted 55 lines · Clément Péron
Quoted 44 lines · Jagan Teki
Quoted 42 lines · Clément Péron
Hi,
Quoted 38 lines · Jagan Teki
Quoted 36 lines · Clément Péron
Hi,
+Chen-Yu Tsai for test and +Icenowy because she try to contact AW about this issue.
Quoted 5 lines · Clément Péron
WDOG is broken for some H6 rev. The board is not
reseted correctly.Use the
R_WDOGinstead.The issue is real except on Pine H64 and Rongpin RP-H6B which seems to be NOT affected.
Lot of users on OrangePi boards (Lite2 / One Plus and 3) are complaining about this issue.We perform a simple watchdog test on different board :
Chen-Yu Tsai :
Pine h64 = H6 V200-AWIN H6448BA 7782 => OK
OrangePi Lite 2 = H6 V200-AWIN H8068BA 61C2 => KOMartin Ayotte :
PineH64 = H8069BA 6892 => OK
Orange Pi 3 = HA047BA 69W2 => KO
OPiOnePlus = H7310BA 6842 => KO
OPiLite2 = H6448BA 6662 => KOClément Péron:
Beelink GS1 = H6 V200-AWIN H7309BA 6842 => KOAfter the series of result, Icenowy try to reach Allwinner about this issue but they seems not interested to investigate it.
Quoted 8 lines
Quoted 7 lines
Quoted 5 lines
Quoted 3 lines
I'm not sure if it's an HW errata or if there something misconfigured but the result is here WDOG doesn't make these boards reboot. And this should not happens !
How about Linux? same issue.
Yes, Linux use PSCI, call ATF and we have the same issue as ATF use the watchdog to reboot.
Quoted 8 lines
Hi,
Quoted 2 lines
There is an RFC for watchdog, can you have any change to add
reset_cpuvia that driver (ofcourse it's a rework)?It's indeed a more proper way but it's a different work. I'm only trying to fix the reboot issue on some H6 boards. Moreover modifying this part will require some testing on different Allwinner boards that I don't have.
True, may be we can plan it for next MW.
PATCH v3 3/3 arm: sunxi: h6: fix reset using r_wdog
In reply to Clément PéronQuoted 5 lines · Clément Péron
WDOG is broken for some H6 rev. The board is not
reseted correctly.Use the
R_WDOGinstead.
Can you describe the proper issue why it broken? this would really help us to understand and future reference.
PATCH v3 3/3 arm: sunxi: h6: fix reset using r_wdog
Hi Jagan,
Quoted 10 lines · Jagan Teki
Quoted 5 lines · Clément Péron
WDOG is broken for some H6 rev. The board is not
reseted correctly.Use the
R_WDOGinstead.Can you describe the proper issue why it broken? this would really help us to understand and future reference.
I would like but I don't have much information on it. If I take the information in my 2nd email is it ok for you ?
Something like this
"
Some H6 boards have a watchdog which didn't make the SoC reboot properly. Reason is still unknown but several people have test it. Chen-Yu Tsai :
Pine H64 = H6 V200-AWIN H6448BA 7782 => OK
OrangePi Lite 2 = H6 V200-AWIN H8068BA 61C2 => KO
Martin Ayotte :
Pine H64 = H8069BA 6892 => OK
OrangePi 3 = HA047BA 69W2 => KO
OrangePi One Plus = H7310BA 6842 => KO
OrangePi Lite2 = H6448BA 6662 => KO
Clément Péron:
Beelink GS1 = H6 V200-AWIN H7309BA 6842 => KO
After the series of result, Icenowy try to reach Allwinner about this issue but they seems not interested to investigate it.
As we don't have the ARIS coproc to do power management and watchdogis the only solution to reset the board.
Change from watchdog to R_watchdog to allow a reboot on all H6 boards. "
Thanks,
Clement
PATCH v3 3/3 arm: sunxi: h6: fix reset using r_wdog
Quoted 35 lines · Clément Péron
Hi Jagan,
Quoted 10 lines · Jagan Teki
Quoted 5 lines · Clément Péron
WDOG is broken for some H6 rev. The board is not
reseted correctly.Use the
R_WDOGinstead.Can you describe the proper issue why it broken? this would really help us to understand and future reference.
I would like but I don't have much information on it. If I take the information in my 2nd email is it ok for you ?
Something like this
"
Some H6 boards have a watchdog which didn't make the SoC reboot properly. Reason is still unknown but several people have test it. Chen-Yu Tsai :
Pine H64 = H6 V200-AWIN H6448BA 7782 => OK
OrangePi Lite 2 = H6 V200-AWIN H8068BA 61C2 => KOMartin Ayotte :
Pine H64 = H8069BA 6892 => OK
OrangePi 3 = HA047BA 69W2 => KO
OrangePi One Plus = H7310BA 6842 => KO
OrangePi Lite2 = H6448BA 6662 => KOClément Péron:
Beelink GS1 = H6 V200-AWIN H7309BA 6842 => KO
Quoted 6 lines
After the series of result, Icenowy try to reach Allwinner about this issue but they seems not interested to investigate it.
As we don't have the ARIS coproc to do power management and watchdogis the only solution to reset the board.
Change from watchdog toR_watchdogto allow a reboot on all H6 boards.
Thanks, included this and
Applied to u-boot-sunxi/master