staging: rtl8*: use help instead of ---help--- in Kconfig
PATCH 1/1 staging: rtl8*: use help instead of ---help--- in Kconfig
From: Moses Christopher <[email protected]>
- Resolve the following warning from the Kconfig, "WARNING: prefer 'help' over '---help---' for new help texts"
Signed-off-by Moses Christopher <[email protected]>
--- drivers/staging/rtl8188eu/Kconfig | 4 ++-- drivers/staging/rtl8192e/Kconfig | 8 ++++---- drivers/staging/rtl8712/Kconfig | 4 ++-- drivers/staging/rtl8723bs/Kconfig | 2 +- 4 files changed, 9 insertions(+), 9 deletions(-)
drivers/staging/rtl8188eu/Kconfig +2 -2
@@ -7,7 +7,7 @@ config R8188EU select LIB80211 select LIB80211_CRYPT_WEP select LIB80211_CRYPT_CCMP - ---help--- + help This option adds the Realtek RTL8188EU USB device such as TP-Link TL-WN725N. If built as a module, it will be called r8188eu.
@@ -16,7 +16,7 @@ if R8188EU config 88EU_AP_MODE bool "Realtek RTL8188EU AP mode" default y - ---help--- + help This option enables Access Point mode. Unless you know that your system will never be used as an AP, or the target system has limited memory, "Y" should be selected.
drivers/staging/rtl8192e/Kconfig +4 -4
@@ -3,7 +3,7 @@ config RTLLIB depends on WLAN && m default n select LIB80211 - ---help--- + help If you have a wireless card that uses rtllib, say Y. Currently the only card is the rtl8192e.
@@ -16,7 +16,7 @@ config RTLLIB_CRYPTO_CCMP depends on RTLLIB select CRYPTO_AES default y - ---help--- + help CCMP crypto driver for rtllib. If you enabled RTLLIB, you want this.
@@ -27,7 +27,7 @@ config RTLLIB_CRYPTO_TKIP select CRYPTO_ARC4 select CRYPTO_MICHAEL_MIC default y - ---help--- + help TKIP crypto driver for rtllib. If you enabled RTLLIB, you want this.
@@ -37,7 +37,7 @@ config RTLLIB_CRYPTO_WEP select CRYPTO_ARC4 depends on RTLLIB default y - ---help--- + help TKIP crypto driver for rtllib. If you enabled RTLLIB, you want this.
drivers/staging/rtl8712/Kconfig +2 -2
@@ -4,14 +4,14 @@ config R8712U select WIRELESS_EXT select WEXT_PRIV select FW_LOADER - ---help--- + help This option adds the Realtek RTL8712 USB device such as the D-Link DWA-130. If built as a module, it will be called r8712u. config R8712_TX_AGGR bool "Realtek RTL8712U Transmit Aggregation code" depends on R8712U && BROKEN - ---help--- + help This option provides transmit aggregation for the Realtek RTL8712 USB device.
drivers/staging/rtl8723bs/Kconfig +1 -1
@@ -4,7 +4,7 @@ config RTL8723BS depends on m select WIRELESS_EXT select WEXT_PRIV - ---help--- + help This option enables support for RTL8723BS SDIO drivers, such as the wifi found on the 1st gen Intel Compute Stick, the CHIP and many other Intel Atom and ARM based devices.
Signature · 1 line
2.11.0
Quoted 6 lines · MosesChristopher
From: Moses Christopher <[email protected]>
- Resolve the following warning from the
Kconfig, "WARNING: prefer 'help' over '---help---' for new help texts"Signed-off-by Moses Christopher <[email protected]>
I have never seen this warning, but your Kconfig may be newer than mine. In any case, the changes are harmless.
Acked-by Larry Finger <[email protected]>
Quoted 104 lines
--- drivers/staging/rtl8188eu/Kconfig | 4 ++-- drivers/staging/rtl8192e/Kconfig | 8 ++++---- drivers/staging/rtl8712/Kconfig | 4 ++-- drivers/staging/rtl8723bs/Kconfig | 2 +- 4 files changed, 9 insertions(+), 9 deletions(-)drivers/staging/rtl8188eu/Kconfig +2
-2@@ -7,7 +7,7 @@ config R8188EU select LIB80211 select LIB80211_CRYPT_WEP select LIB80211_CRYPT_CCMP - ---help--- + help This option adds the Realtek RTL8188EU USB device such as TP-Link TL-WN725N. If built as a module, it will be called r8188eu.@@ -16,7 +16,7 @@ if R8188EU config 88EU_AP_MODE bool "Realtek RTL8188EU AP mode" default y - ---help--- + help This option enables Access Point mode. Unless you know that your system will never be used as an AP, or the target system has limited memory, "Y" should be selected.drivers/staging/rtl8192e/Kconfig +4
-4@@ -3,7 +3,7 @@ config RTLLIB depends on WLAN && m default n select LIB80211 - ---help--- + help If you have a wireless card that uses rtllib, say Y. Currently the only card is the rtl8192e.@@ -16,7 +16,7 @@ config RTLLIB_CRYPTO_CCMP depends on RTLLIB select CRYPTO_AES default y - ---help--- + help CCMP crypto driver for rtllib. If you enabled RTLLIB, you want this.@@ -27,7 +27,7 @@ config RTLLIB_CRYPTO_TKIP select CRYPTO_ARC4 select CRYPTO_MICHAEL_MIC default y - ---help--- + help TKIP crypto driver for rtllib. If you enabled RTLLIB, you want this.@@ -37,7 +37,7 @@ config RTLLIB_CRYPTO_WEP select CRYPTO_ARC4 depends on RTLLIB default y - ---help--- + help TKIP crypto driver for rtllib. If you enabled RTLLIB, you want this.drivers/staging/rtl8712/Kconfig +2
-2@@ -4,14 +4,14 @@ config R8712U select WIRELESS_EXT select WEXT_PRIV select FW_LOADER - ---help--- + help This option adds the Realtek RTL8712 USB device such as the D-Link DWA-130. If built as a module, it will be called r8712u. config R8712_TX_AGGR bool "Realtek RTL8712U Transmit Aggregation code" depends on R8712U && BROKEN - ---help--- + help This option provides transmit aggregation for the Realtek RTL8712 USB device.drivers/staging/rtl8723bs/Kconfig +1
-1@@ -4,7 +4,7 @@ config RTL8723BS depends on m select WIRELESS_EXT select WEXT_PRIV - ---help--- + help This option enables support for RTL8723BS SDIO drivers, such as the wifi found on the 1st gen Intel Compute Stick, the CHIP and many other Intel Atom and ARM based devices.