Skip to contentSkip to conversation

staging: rtl8*: use help instead of ---help--- in Kconfig

PATCH In review MosesChristopher 2 participants 2 messages Apr 20, 2019 Staging

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 staging: rtl8*: use help instead of ---help--- in Kconfig

From: Moses Christopher <[email protected]>

- Resolve the following warning from the Kconfig, "WARNING: prefer 'help' over '---help---' for new help texts"

---
 drivers/staging/rtl8188eu/Kconfig | 4 ++--
 drivers/staging/rtl8192e/Kconfig  | 8 ++++----
 drivers/staging/rtl8712/Kconfig   | 4 ++--
 drivers/staging/rtl8723bs/Kconfig | 2 +-
 4 files changed, 9 insertions(+), 9 deletions(-)
drivers/staging/rtl8188eu/Kconfig +2 -2
index ff7832798a77..3f8c655856bf 100644
@@ -7,7 +7,7 @@ config R8188EU
 	select LIB80211
 	select LIB80211_CRYPT_WEP
 	select LIB80211_CRYPT_CCMP
-	---help---
+	help
 	This option adds the Realtek RTL8188EU USB device such as TP-Link TL-WN725N.
 	If built as a module, it will be called r8188eu.
 
@@ -16,7 +16,7 @@ if R8188EU
 config 88EU_AP_MODE
 	bool "Realtek RTL8188EU AP mode"
 	default y
-	---help---
+	help
 	This option enables Access Point mode. Unless you know that your system
 	will never be used as an AP, or the target system has limited memory,
 	"Y" should be selected.
drivers/staging/rtl8192e/Kconfig +4 -4
index 4602a47cdb4a..aa571c12678f 100644
@@ -3,7 +3,7 @@ config RTLLIB
 	depends on WLAN && m
 	default n
 	select LIB80211
-	---help---
+	help
 	  If you have a wireless card that uses rtllib, say
 	  Y. Currently the only card is the rtl8192e.
 
@@ -16,7 +16,7 @@ config RTLLIB_CRYPTO_CCMP
 	depends on RTLLIB
 	select CRYPTO_AES
 	default y
-	---help---
+	help
 	  CCMP crypto driver for rtllib.
 
 	  If you enabled RTLLIB, you want this.
@@ -27,7 +27,7 @@ config RTLLIB_CRYPTO_TKIP
 	select CRYPTO_ARC4
 	select CRYPTO_MICHAEL_MIC
 	default y
-	---help---
+	help
 	  TKIP crypto driver for rtllib.
 
 	  If you enabled RTLLIB, you want this.
@@ -37,7 +37,7 @@ config RTLLIB_CRYPTO_WEP
 	select CRYPTO_ARC4
 	depends on RTLLIB
 	default y
-	---help---
+	help
 	  TKIP crypto driver for rtllib.
 
 	  If you enabled RTLLIB, you want this.
drivers/staging/rtl8712/Kconfig +2 -2
index f160eee52f09..b377d90742db 100644
@@ -4,14 +4,14 @@ config R8712U
 	select WIRELESS_EXT
 	select WEXT_PRIV
 	select FW_LOADER
-	---help---
+	help
 	This option adds the Realtek RTL8712 USB device such as the D-Link DWA-130.
 	If built as a module, it will be called r8712u.
 
 config R8712_TX_AGGR
 	bool "Realtek RTL8712U Transmit Aggregation code"
 	depends on R8712U && BROKEN
-	---help---
+	help
 	This option provides transmit aggregation for the Realtek RTL8712 USB device.
 
 
drivers/staging/rtl8723bs/Kconfig +1 -1
index deae0427ba6c..41ad6ed24860 100644
@@ -4,7 +4,7 @@ config RTL8723BS
 	depends on m
 	select WIRELESS_EXT
 	select WEXT_PRIV
-	---help---
+	help
 	This option enables support for RTL8723BS SDIO drivers, such as
 	the wifi found on the 1st gen Intel Compute Stick, the CHIP
 	and many other Intel Atom and ARM based devices.
Signature · 1 line
2.11.0
Acked-by on v1 1/1
#1 lore raw
Quoted 6 lines · MosesChristopher

From: Moses Christopher <[email protected]>

- Resolve the following warning from the Kconfig, "WARNING: prefer 'help' over '---help---' for new help texts"

I have never seen this warning, but your Kconfig may be newer than mine. In any case, the changes are harmless.

Quoted 104 lines
---
  drivers/staging/rtl8188eu/Kconfig | 4 ++--
  drivers/staging/rtl8192e/Kconfig  | 8 ++++----
  drivers/staging/rtl8712/Kconfig   | 4 ++--
  drivers/staging/rtl8723bs/Kconfig | 2 +-
  4 files changed, 9 insertions(+), 9 deletions(-)
drivers/staging/rtl8188eu/Kconfig +2 -2
index ff7832798a77..3f8c655856bf 100644
@@ -7,7 +7,7 @@ config R8188EU
  	select LIB80211
  	select LIB80211_CRYPT_WEP
  	select LIB80211_CRYPT_CCMP
-	---help---
+	help
  	This option adds the Realtek RTL8188EU USB device such as TP-Link TL-WN725N.
  	If built as a module, it will be called r8188eu.
 
@@ -16,7 +16,7 @@ if R8188EU
  config 88EU_AP_MODE
  	bool "Realtek RTL8188EU AP mode"
  	default y
-	---help---
+	help
  	This option enables Access Point mode. Unless you know that your system
  	will never be used as an AP, or the target system has limited memory,
  	"Y" should be selected.
drivers/staging/rtl8192e/Kconfig +4 -4
index 4602a47cdb4a..aa571c12678f 100644
@@ -3,7 +3,7 @@ config RTLLIB
  	depends on WLAN && m
  	default n
  	select LIB80211
-	---help---
+	help
  	  If you have a wireless card that uses rtllib, say
  	  Y. Currently the only card is the rtl8192e.
 
@@ -16,7 +16,7 @@ config RTLLIB_CRYPTO_CCMP
  	depends on RTLLIB
  	select CRYPTO_AES
  	default y
-	---help---
+	help
  	  CCMP crypto driver for rtllib.
 
  	  If you enabled RTLLIB, you want this.
@@ -27,7 +27,7 @@ config RTLLIB_CRYPTO_TKIP
  	select CRYPTO_ARC4
  	select CRYPTO_MICHAEL_MIC
  	default y
-	---help---
+	help
  	  TKIP crypto driver for rtllib.
 
  	  If you enabled RTLLIB, you want this.
@@ -37,7 +37,7 @@ config RTLLIB_CRYPTO_WEP
  	select CRYPTO_ARC4
  	depends on RTLLIB
  	default y
-	---help---
+	help
  	  TKIP crypto driver for rtllib.
 
  	  If you enabled RTLLIB, you want this.
drivers/staging/rtl8712/Kconfig +2 -2
index f160eee52f09..b377d90742db 100644
@@ -4,14 +4,14 @@ config R8712U
  	select WIRELESS_EXT
  	select WEXT_PRIV
  	select FW_LOADER
-	---help---
+	help
  	This option adds the Realtek RTL8712 USB device such as the D-Link DWA-130.
  	If built as a module, it will be called r8712u.
 
  config R8712_TX_AGGR
  	bool "Realtek RTL8712U Transmit Aggregation code"
  	depends on R8712U && BROKEN
-	---help---
+	help
  	This option provides transmit aggregation for the Realtek RTL8712 USB device.
 
 
drivers/staging/rtl8723bs/Kconfig +1 -1
index deae0427ba6c..41ad6ed24860 100644
@@ -4,7 +4,7 @@ config RTL8723BS
  	depends on m
  	select WIRELESS_EXT
  	select WEXT_PRIV
-	---help---
+	help
  	This option enables support for RTL8723BS SDIO drivers, such as
  	the wifi found on the 1st gen Intel Compute Stick, the CHIP
  	and many other Intel Atom and ARM based devices.