Skip to contentSkip to conversation

Add drive-strength in Meson pinctrl driver

PATCH Superseded Guillaume La Roque 1 participant 2 messages May 9, 2019

Subsystems (4)

v4 of 6 Superseded Latest is v6 →

lore
Share & tools
lore
#0 lore raw

v4 cover Add drive-strength in Meson pinctrl driver

The purpose of this patchset is to add drive-strength support in meson pinconf driver. This is a new feature that was added on the g12a. It is critical for us to support this since many functions are failing with default pad drive-strength.

The value achievable by the SoC are 0.5mA, 2.5mA, 3mA and 4mA and the DT property 'drive-strength' is expressed in mA.
So this patch add another generic property "drive-strength-uA". The change to do so would be minimal and could be benefit to other platforms later on.

Cheers
Guillaume

Changes since v3:
- remove dev_err in meson_get_drive_strength
- cleanup code

Changes since v2:
- update driver-strength-uA property to be compliant with DT documentation
- rework patch series for better understanding
- rework set_bias function

Changes since v1:
- fix missing break
- implement new pinctrl generic property "drive-strength-uA"

[1] https://lkml.kernel.org/r/[email protected]

Guillaume La Roque (6):
dt-bindings: pinctrl: add a 'drive-strength-microamp' property
pinctrl: generic: add new 'drive-strength-microamp' property support
dt-bindings: pinctrl: meson: Add drive-strength-microamp property
pinctrl: meson: Rework enable/disable bias part
pinctrl: meson: add support of drive-strength-microamp
pinctrl: meson: g12a: add DS bank value

 .../bindings/pinctrl/meson,pinctrl.txt        |   4 +
 .../bindings/pinctrl/pinctrl-bindings.txt     |   3 +
 drivers/pinctrl/meson/pinctrl-meson-g12a.c    |  36 ++--
 drivers/pinctrl/meson/pinctrl-meson.c         | 180 ++++++++++++++----
 drivers/pinctrl/meson/pinctrl-meson.h         |  18 +-
 drivers/pinctrl/pinconf-generic.c             |   2 +
 include/linux/pinctrl/pinconf-generic.h       |   3 +
 7 files changed, 193 insertions(+), 53 deletions(-)
Signature · 1 line
2.17.1
#1 lore raw

PATCH v4 1/6 dt-bindings: pinctrl: add a 'drive-strength-microamp' property

This property allow drive-strength parameter in uA instead of mA.

---
 Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt | 3 +++
 1 file changed, 3 insertions(+)
Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt +3 -0
index cef2b5855d60..84adce9f2a75 100644
@@ -258,6 +258,7 @@ drive-push-pull		- drive actively high and low
 drive-open-drain	- drive with open drain
 drive-open-source	- drive with open source
 drive-strength		- sink or source at most X mA
+drive-strength-microamp	- sink or source at most X uA
 input-enable		- enable input on pin (no effect on output, such as
 			  enabling an input buffer)
 input-disable		- disable input on pin (no effect on output, such as
@@ -326,6 +327,8 @@ arguments are described below.
 
 - drive-strength takes as argument the target strength in mA.
 
+- drive-strength-uA takes as argument the target strength in uA.
+
 - input-debounce takes the debounce time in usec as argument
   or 0 to disable debouncing
 
Signature · 1 line
2.17.1