Support for i.MX8QM Boards with SCFW and ATF
Hello,
I have a new i.MX8QM based board here and I'am interested to get it work with u-boot. Now its starting with NXP flavored u-boot-imx.
CPU: Freescale i.MX8QM revB A53 at 1200 MHz at 48C Model: Advantech iMX8QM Qseven series Board: ROM-7720 A1
These boards needs some ARM trusted Firmware (ATF) and System Controll Firmware (SCFW) to boot.
SCFW(scfw_tcm.bin) + ATF(bl31.bin) + uboot ----> imx-boot
How far is this supported by u-boot yet? I saw some patches in this direction on the list already.
Somebody else have this or similar MX8QM based boards and know howto get t to work with u-boot and which nxp patches needs porting?
Best regards,
Oliver
Hi Oliver
Quoted 19 lines
-----Original Message-----
From: Oliver Graute [mailto:oliver.graute at gmail.com]
Sent: 2019年5月14日 16:11
To: Peng Fan <[email protected]>
Cc: u-boot at lists.denx.de
Subject: Support for i.MX8QM Boards with SCFW and ATFHello,
I have a new i.MX8QM based board here and I'am interested to get it work with u-boot. Now its starting with NXP flavored u-boot-imx.
CPU: Freescale i.MX8QM revB A53 at 1200 MHz at 48C Model: Advantech iMX8QM Qseven series Board: ROM-7720 A1These boards needs some ARM trusted Firmware (ATF) and System Controll Firmware (SCFW) to boot.
Quoted 7 lines
SCFW(scfw_tcm.bin)+ ATF(bl31.bin) + uboot ----> imx-bootHow far is this supported by u-boot yet? I saw some patches in this direction on the list already.
Somebody else have this or similar MX8QM based boards and know howto get t to work with u-boot and which nxp patches needs porting?
You could take board/freescale/imx8qm_mek/README as a reference.
Regards,
Peng
Quoted 4 lines
Best regards,
Oliver