Skip to contentSkip to conversation

Support for i.MX8QM Boards with SCFW and ATF

U-Boot Oliver Graute 2 participants 2 messages May 14, 2019

lore
Share & tools
lore
#0 lore raw

Hello,

I have a new i.MX8QM based board here and I'am interested to get it work with u-boot. Now its starting with NXP flavored u-boot-imx.

CPU:   Freescale i.MX8QM revB A53 at 1200 MHz at 48C
Model: Advantech iMX8QM Qseven series
Board: ROM-7720 A1

These boards needs some ARM trusted Firmware (ATF) and System Controll Firmware (SCFW) to boot.

SCFW(scfw_tcm.bin) + ATF(bl31.bin) + uboot ----> imx-boot

How far is this supported by u-boot yet? I saw some patches in this direction on the list already.

Somebody else have this or similar MX8QM based boards and know howto get t to work with u-boot and which nxp patches needs porting?

Best regards,

Oliver

#1 lore raw

Hi Oliver

Quoted 19 lines

-----Original Message-----
From: Oliver Graute [mailto:oliver.graute at gmail.com]
Sent: 2019年5月14日 16:11
To: Peng Fan <[email protected]>
Cc: u-boot at lists.denx.de
Subject: Support for i.MX8QM Boards with SCFW and ATF

Hello,

I have a new i.MX8QM based board here and I'am interested to get it work with u-boot. Now its starting with NXP flavored u-boot-imx.

CPU:   Freescale i.MX8QM revB A53 at 1200 MHz at 48C
Model: Advantech iMX8QM Qseven series
Board: ROM-7720 A1

These boards needs some ARM trusted Firmware (ATF) and System Controll Firmware (SCFW) to boot.

Quoted 7 lines

SCFW(scfw_tcm.bin) + ATF(bl31.bin) + uboot ----> imx-boot

How far is this supported by u-boot yet? I saw some patches in this direction on the list already.

Somebody else have this or similar MX8QM based boards and know howto get t to work with u-boot and which nxp patches needs porting?

You could take board/freescale/imx8qm_mek/README as a reference.

Regards,
Peng

Quoted 4 lines

Best regards,

Oliver