imx: Cleanup i.MX6Q mccmon6 board configuration
cover imx: Cleanup i.MX6Q mccmon6 board configuration
This patch series updates mccmon6 configuration to remove some "removal" warnings (i.e. disables the USB related code).
It also on purpose disables gigabig ethernet, as this board works on 10/100 Mib environments.
Patches applicable on top of master branch:
SHA1: 5b4b680cfe29a67171ccbe439c66374cb31faca3
Lukasz Majewski (3):
ARM: imx: cosmetic: Remove not needed comment from the mccmon6.h file
ARM: imx: config: Disable support for USB on MCCMON6
ARM: imx: Disable 1Gbps support on MCCMON6's KSZ9031 PHY
configs/mccmon6_nor_defconfig | 2 -- configs/mccmon6_sd_defconfig | 2 -- include/configs/mccmon6.h | 8 +------- 3 files changed, 1 insertion(+), 11 deletions(-)
Signature · 1 line
2.11.0
PATCH 1/3 ARM: imx: cosmetic: Remove not needed comment from the mccmon6.h file
This comment is a leftover from the Kconfig CONFIG_*MTD* move.
---
include/configs/mccmon6.h | 2 -- 1 file changed, 2 deletions(-)
include/configs/mccmon6.h +0 -2
@@ -65,8 +65,6 @@#define CONFIG_SYS_FLASH_BANKS_LIST { (CONFIG_SYS_FLASH_BASE) }#define CONFIG_SYS_FLASH_BANKS_SIZES { (32 * SZ_1M) } -/* MTD support */ -/* USB Configs */ #define CONFIG_USB_MAX_CONTROLLER_COUNT 2#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
Signature · 1 line
2.11.0
PATCH 1/3 ARM: imx: cosmetic: Remove not needed comment from the mccmon6.h file
Quoted 2 lines
This comment is a leftover from the
KconfigCONFIG_*MTD* move.Signed-off-by Lukasz Majewski <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================
PATCH 2/3 ARM: imx: config: Disable support for USB on MCCMON6
In reply to Lukasz MajewskiThe IMX6Q based MCCMON6 is not using USB for any purpose.
---
configs/mccmon6_nor_defconfig | 2 -- configs/mccmon6_sd_defconfig | 2 -- include/configs/mccmon6.h | 5 ----- 3 files changed, 9 deletions(-)
configs/mccmon6_nor_defconfig +0 -2
@@ -20,7 +20,6 @@ CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_USB=y CONFIG_CMD_CACHE=y CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_MTDPARTS=y
@@ -50,5 +49,4 @@ CONFIG_MII=y CONFIG_SPI=y CONFIG_MXC_SPI=y CONFIG_DM_THERMAL=y -CONFIG_USB=y CONFIG_OF_LIBFDT=y
configs/mccmon6_sd_defconfig +0 -2
@@ -21,7 +21,6 @@ CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_USB=y CONFIG_CMD_CACHE=y CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_MTDPARTS=y
@@ -51,5 +50,4 @@ CONFIG_MII=y CONFIG_SPI=y CONFIG_MXC_SPI=y CONFIG_DM_THERMAL=y -CONFIG_USB=y CONFIG_OF_LIBFDT=y
include/configs/mccmon6.h +0 -5
@@ -65,11 +65,6 @@#define CONFIG_SYS_FLASH_BANKS_LIST { (CONFIG_SYS_FLASH_BASE) }#define CONFIG_SYS_FLASH_BANKS_SIZES { (32 * SZ_1M) } -/* USB Configs */ -#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 -#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) -#define CONFIG_MXC_USB_FLAGS 0 -/* Ethernet Configuration */ #define CONFIG_FEC_MXC #define IMX_FEC_BASE ENET_BASE_ADDR
Signature · 1 line
2.11.0
PATCH 2/3 ARM: imx: config: Disable support for USB on MCCMON6
Quoted 2 lines
The IMX6Q based MCCMON6 is not using USB for any purpose.
Signed-off-by Lukasz Majewski <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================
PATCH 3/3 ARM: imx: Disable 1Gbps support on MCCMON6's KSZ9031 PHY
In reply to Lukasz Majewskimccmon6 works in 10/100 MiB Ethernet environment, so disabling 1GiB support improves robustness of the network after power up (as one don't need to wait for autoneg).
---
include/configs/mccmon6.h | 1 + 1 file changed, 1 insertion(+)
include/configs/mccmon6.h +1 -0
@@ -78,6 +78,7 @@"fdt_high=0xffffffff\0" \"initrd_high=0xffffffff\0" \"boot_os=yes\0" \ +"disable_giga=yes\0" \"download_kernel=" \"tftpboot ${kernel_addr} ${kernel_file};" \"tftpboot ${fdt_addr} ${fdtfile};\0" \
Signature · 1 line
2.11.0
PATCH 3/3 ARM: imx: Disable 1Gbps support on MCCMON6's KSZ9031 PHY
Quoted 4 lines
mccmon6 works in 10/100 MiB Ethernet environment, so disabling 1GiB support improves robustness of the network after power up (as one don't need to wait for autoneg).
Signed-off-by Lukasz Majewski <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================