Skip to contentSkip to conversation

mtd: spinand: Add support for GigaDevice GD5F1GQ4UFxxG

PATCH Superseded Jeff Kletsky 1 participant 5 messages May 20, 2019 – May 22, 2019

Subsystems (2)
Memory technology devices (MTD) NAND flash

v3 of 4 Superseded Latest is v4 →

lore
Share & tools
lore

Jeff Kletsky

author
#0 lore raw

v3 cover mtd: spinand: Add support for GigaDevice GD5F1GQ4UFxxG

Thanks for the time and suggestions in review.

Commit-message wording revised as suggested.

No changes in patch content.

Supersedes series:

[v2,1/3] mtd: spinand: Add #define-s for page-read ops with three-byte addresses
https://patchwork.ozlabs.org/project/linux-mtd/list/?series=107874

Jeff

Cc Boris Brezillon <[email protected]>
Cc Schrempf Frieder <[email protected]>
Cc Miquel Raynal <[email protected]>
Cc Richard Weinberger <[email protected]>
Cc David Woodhouse <[email protected]>
Cc Brian Norris <[email protected]>
Cc Marek Vasut <[email protected]>
Cc [email protected]
Cc [email protected]
author
#1 lore raw

PATCH v3 1/3 mtd: spinand: Define macros for page-read ops with three-byte addresses

From: Jeff Kletsky <[email protected]>

The GigaDevice GD5F1GQ4UFxxG SPI NAND utilizes three-byte addresses for its page-read ops.

http://www.gigadevice.com/datasheet/gd5f1gq4xfxxg/

Signed-off-by Jeff Kletsky <[email protected]>
Reviewed-by Frieder Schrempf <[email protected]>
---
 include/linux/mtd/spinand.h | 30 ++++++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)
include/linux/mtd/spinand.h +30 -0
index b92e2aa955b6..05fe98eebe27 100644
@@ -68,30 +68,60 @@
 		   SPI_MEM_OP_DUMMY(ndummy, 1),				\
 		   SPI_MEM_OP_DATA_IN(len, buf, 1))
 
+#define SPINAND_PAGE_READ_FROM_CACHE_OP_3A(fast, addr, ndummy, buf, len) \
+	SPI_MEM_OP(SPI_MEM_OP_CMD(fast ? 0x0b : 0x03, 1),		\
+		   SPI_MEM_OP_ADDR(3, addr, 1),				\
+		   SPI_MEM_OP_DUMMY(ndummy, 1),				\
+		   SPI_MEM_OP_DATA_IN(len, buf, 1))
+
 #define SPINAND_PAGE_READ_FROM_CACHE_X2_OP(addr, ndummy, buf, len)	\
 	SPI_MEM_OP(SPI_MEM_OP_CMD(0x3b, 1),				\
 		   SPI_MEM_OP_ADDR(2, addr, 1),				\
 		   SPI_MEM_OP_DUMMY(ndummy, 1),				\
 		   SPI_MEM_OP_DATA_IN(len, buf, 2))
 
+#define SPINAND_PAGE_READ_FROM_CACHE_X2_OP_3A(addr, ndummy, buf, len)	\
+	SPI_MEM_OP(SPI_MEM_OP_CMD(0x3b, 1),				\
+		   SPI_MEM_OP_ADDR(3, addr, 1),				\
+		   SPI_MEM_OP_DUMMY(ndummy, 1),				\
+		   SPI_MEM_OP_DATA_IN(len, buf, 2))
+
 #define SPINAND_PAGE_READ_FROM_CACHE_X4_OP(addr, ndummy, buf, len)	\
 	SPI_MEM_OP(SPI_MEM_OP_CMD(0x6b, 1),				\
 		   SPI_MEM_OP_ADDR(2, addr, 1),				\
 		   SPI_MEM_OP_DUMMY(ndummy, 1),				\
 		   SPI_MEM_OP_DATA_IN(len, buf, 4))
 
+#define SPINAND_PAGE_READ_FROM_CACHE_X4_OP_3A(addr, ndummy, buf, len)	\
+	SPI_MEM_OP(SPI_MEM_OP_CMD(0x6b, 1),				\
+		   SPI_MEM_OP_ADDR(3, addr, 1),				\
+		   SPI_MEM_OP_DUMMY(ndummy, 1),				\
+		   SPI_MEM_OP_DATA_IN(len, buf, 4))
+
 #define SPINAND_PAGE_READ_FROM_CACHE_DUALIO_OP(addr, ndummy, buf, len)	\
 	SPI_MEM_OP(SPI_MEM_OP_CMD(0xbb, 1),				\
 		   SPI_MEM_OP_ADDR(2, addr, 2),				\
 		   SPI_MEM_OP_DUMMY(ndummy, 2),				\
 		   SPI_MEM_OP_DATA_IN(len, buf, 2))
 
+#define SPINAND_PAGE_READ_FROM_CACHE_DUALIO_OP_3A(addr, ndummy, buf, len) \
+	SPI_MEM_OP(SPI_MEM_OP_CMD(0xbb, 1),				\
+		   SPI_MEM_OP_ADDR(3, addr, 2),				\
+		   SPI_MEM_OP_DUMMY(ndummy, 2),				\
+		   SPI_MEM_OP_DATA_IN(len, buf, 2))
+
 #define SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(addr, ndummy, buf, len)	\
 	SPI_MEM_OP(SPI_MEM_OP_CMD(0xeb, 1),				\
 		   SPI_MEM_OP_ADDR(2, addr, 4),				\
 		   SPI_MEM_OP_DUMMY(ndummy, 4),				\
 		   SPI_MEM_OP_DATA_IN(len, buf, 4))
 
+#define SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP_3A(addr, ndummy, buf, len) \
+	SPI_MEM_OP(SPI_MEM_OP_CMD(0xeb, 1),				\
+		   SPI_MEM_OP_ADDR(3, addr, 4),				\
+		   SPI_MEM_OP_DUMMY(ndummy, 4),				\
+		   SPI_MEM_OP_DATA_IN(len, buf, 4))
+
 #define SPINAND_PROG_EXEC_OP(addr)					\
 	SPI_MEM_OP(SPI_MEM_OP_CMD(0x10, 1),				\
 		   SPI_MEM_OP_ADDR(3, addr, 1),				\
Signature · 1 line
2.20.1
author
#2 lore raw

PATCH v3 2/3 mtd: spinand: Add support for two-byte device IDs

In reply to Jeff Kletsky

From: Jeff Kletsky <[email protected]>

The GigaDevice GD5F1GQ4UFxxG SPI NAND utilizes two-byte device IDs.

http://www.gigadevice.com/datasheet/gd5f1gq4xfxxg/

Signed-off-by Jeff Kletsky <[email protected]>
Reviewed-by Frieder Schrempf <[email protected]>
---
 drivers/mtd/nand/spi/core.c | 2 +-
 include/linux/mtd/spinand.h | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)
drivers/mtd/nand/spi/core.c +1 -1
index fa87ae28cdfe..a13154785dad 100644
@@ -853,7 +853,7 @@ spinand_select_op_variant(struct spinand_device *spinand,
  */
 int spinand_match_and_init(struct spinand_device *spinand,
 			   const struct spinand_info *table,
-			   unsigned int table_size, u8 devid)
+			   unsigned int table_size, u16 devid)
 {
 	struct nand_device *nand = spinand_to_nand(spinand);
 	unsigned int i;
include/linux/mtd/spinand.h +2 -2
index 05fe98eebe27..8901ba272538 100644
@@ -290,7 +290,7 @@ struct spinand_ecc_info {
  */
 struct spinand_info {
 	const char *model;
-	u8 devid;
+	u16 devid;
 	u32 flags;
 	struct nand_memory_organization memorg;
 	struct nand_ecc_req eccreq;

@@ -445,7 +445,7 @@ static inline void spinand_set_of_node(struct spinand_device *spinand,
 
 int spinand_match_and_init(struct spinand_device *dev,
 			   const struct spinand_info *table,
-			   unsigned int table_size, u8 devid);
+			   unsigned int table_size, u16 devid);
 
 int spinand_upd_cfg(struct spinand_device *spinand, u8 mask, u8 val);
 int spinand_select_target(struct spinand_device *spinand, unsigned int target);
Signature · 1 line
2.20.1
author
#3 lore raw

PATCH v3 3/3 mtd: spinand: Add support for GigaDevice GD5F1GQ4UFxxG

In reply to Jeff Kletsky

From: Jeff Kletsky <[email protected]>

The GigaDevice GD5F1GQ4UFxxG SPI NAND is in current production devices and, while it has the same logical layout as the E-series devices, it differs in the SPI interfacing in significant ways.

This support is contingent on previous commits to:

* Add support for two-byte device IDs
* Define macros for page-read ops with three-byte addresses

http://www.gigadevice.com/datasheet/gd5f1gq4xfxxg/

Signed-off-by Jeff Kletsky <[email protected]>
Reviewed-by Frieder Schrempf <[email protected]>
---
 drivers/mtd/nand/spi/gigadevice.c | 79 +++++++++++++++++++++++++------
 1 file changed, 64 insertions(+), 15 deletions(-)
drivers/mtd/nand/spi/gigadevice.c +64 -15
index 0b49d8264bef..d6497ac4c5d8 100644
@@ -9,11 +9,17 @@
 #include <linux/mtd/spinand.h>
 
 #define SPINAND_MFR_GIGADEVICE			0xC8
+
 #define GD5FXGQ4XA_STATUS_ECC_1_7_BITFLIPS	(1 << 4)
 #define GD5FXGQ4XA_STATUS_ECC_8_BITFLIPS	(3 << 4)
 
 #define GD5FXGQ4UEXXG_REG_STATUS2		0xf0
 
+#define GD5FXGQ4UXFXXG_STATUS_ECC_MASK		(7 << 4)
+#define GD5FXGQ4UXFXXG_STATUS_ECC_NO_BITFLIPS	(0 << 4)
+#define GD5FXGQ4UXFXXG_STATUS_ECC_1_3_BITFLIPS	(1 << 4)
+#define GD5FXGQ4UXFXXG_STATUS_ECC_UNCOR_ERROR	(7 << 4)
+
 static SPINAND_OP_VARIANTS(read_cache_variants,
 		SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 2, NULL, 0),
 		SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0),

@@ -22,6 +28,14 @@ static SPINAND_OP_VARIANTS(read_cache_variants,
 		SPINAND_PAGE_READ_FROM_CACHE_OP(true, 0, 1, NULL, 0),
 		SPINAND_PAGE_READ_FROM_CACHE_OP(false, 0, 1, NULL, 0));
 
+static SPINAND_OP_VARIANTS(read_cache_variants_f,
+		SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 2, NULL, 0),
+		SPINAND_PAGE_READ_FROM_CACHE_X4_OP_3A(0, 1, NULL, 0),
+		SPINAND_PAGE_READ_FROM_CACHE_DUALIO_OP(0, 1, NULL, 0),
+		SPINAND_PAGE_READ_FROM_CACHE_X2_OP_3A(0, 1, NULL, 0),
+		SPINAND_PAGE_READ_FROM_CACHE_OP_3A(true, 0, 1, NULL, 0),
+		SPINAND_PAGE_READ_FROM_CACHE_OP_3A(false, 0, 0, NULL, 0));
+
 static SPINAND_OP_VARIANTS(write_cache_variants,
 		SPINAND_PROG_LOAD_X4(true, 0, NULL, 0),
 		SPINAND_PROG_LOAD(true, 0, NULL, 0));

@@ -59,6 +73,11 @@ static int gd5fxgq4xa_ooblayout_free(struct mtd_info *mtd, int section,
 	return 0;
 }
 
+static const struct mtd_ooblayout_ops gd5fxgq4xa_ooblayout = {
+	.ecc = gd5fxgq4xa_ooblayout_ecc,
+	.free = gd5fxgq4xa_ooblayout_free,
+};
+
 static int gd5fxgq4xa_ecc_get_status(struct spinand_device *spinand,
 					 u8 status)
 {

@@ -83,7 +102,7 @@ static int gd5fxgq4xa_ecc_get_status(struct spinand_device *spinand,
 	return -EINVAL;
 }
 
-static int gd5fxgq4uexxg_ooblayout_ecc(struct mtd_info *mtd, int section,
+static int gd5fxgq4_variant2_ooblayout_ecc(struct mtd_info *mtd, int section,
 				       struct mtd_oob_region *region)
 {
 	if (section)

@@ -95,7 +114,7 @@ static int gd5fxgq4uexxg_ooblayout_ecc(struct mtd_info *mtd, int section,
 	return 0;
 }
 
-static int gd5fxgq4uexxg_ooblayout_free(struct mtd_info *mtd, int section,
+static int gd5fxgq4_variant2_ooblayout_free(struct mtd_info *mtd, int section,
 					struct mtd_oob_region *region)
 {
 	if (section)

@@ -108,6 +127,11 @@ static int gd5fxgq4uexxg_ooblayout_free(struct mtd_info *mtd, int section,
 	return 0;
 }
 
+static const struct mtd_ooblayout_ops gd5fxgq4_variant2_ooblayout = {
+	.ecc = gd5fxgq4_variant2_ooblayout_ecc,
+	.free = gd5fxgq4_variant2_ooblayout_free,
+};
+
 static int gd5fxgq4uexxg_ecc_get_status(struct spinand_device *spinand,
 					u8 status)
 {

@@ -150,15 +174,25 @@ static int gd5fxgq4uexxg_ecc_get_status(struct spinand_device *spinand,
 	return -EINVAL;
 }
 
-static const struct mtd_ooblayout_ops gd5fxgq4xa_ooblayout = {
-	.ecc = gd5fxgq4xa_ooblayout_ecc,
-	.free = gd5fxgq4xa_ooblayout_free,
-};
+static int gd5fxgq4ufxxg_ecc_get_status(struct spinand_device *spinand,
+					u8 status)
+{
+	switch (status & GD5FXGQ4UXFXXG_STATUS_ECC_MASK) {
+	case GD5FXGQ4UXFXXG_STATUS_ECC_NO_BITFLIPS:
+		return 0;
 
-static const struct mtd_ooblayout_ops gd5fxgq4uexxg_ooblayout = {
-	.ecc = gd5fxgq4uexxg_ooblayout_ecc,
-	.free = gd5fxgq4uexxg_ooblayout_free,
-};
+	case GD5FXGQ4UXFXXG_STATUS_ECC_1_3_BITFLIPS:
+		return 3;
+
+	case GD5FXGQ4UXFXXG_STATUS_ECC_UNCOR_ERROR:
+		return -EBADMSG;
+
+	default: /* (2 << 4) through (6 << 4) are 4-8 corrected errors */
+		return ((status & GD5FXGQ4UXFXXG_STATUS_ECC_MASK) >> 4) + 2;
+	}
+
+	return -EINVAL;
+}
 
 static const struct spinand_info gigadevice_spinand_table[] = {
 	SPINAND_INFO("GD5F1GQ4xA", 0xF1,

@@ -195,25 +229,40 @@ static const struct spinand_info gigadevice_spinand_table[] = {
 					      &write_cache_variants,
 					      &update_cache_variants),
 		     0,
-		     SPINAND_ECCINFO(&gd5fxgq4uexxg_ooblayout,
+		     SPINAND_ECCINFO(&gd5fxgq4_variant2_ooblayout,
 				     gd5fxgq4uexxg_ecc_get_status)),
+	SPINAND_INFO("GD5F1GQ4UFxxG", 0xb148,
+		     NAND_MEMORG(1, 2048, 128, 64, 1024, 1, 1, 1),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants_f,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     0,
+		     SPINAND_ECCINFO(&gd5fxgq4_variant2_ooblayout,
+				     gd5fxgq4ufxxg_ecc_get_status)),
 };
 
 static int gigadevice_spinand_detect(struct spinand_device *spinand)
 {
 	u8 *id = spinand->id.data;
+	u16 did;
 	int ret;
 
 	/*
-	 * For GD NANDs, There is an address byte needed to shift in before IDs
-	 * are read out, so the first byte in raw_id is dummy.
+	 * Earlier GDF5-series devices (A,E) return [0][MID][DID]
+	 * Later (F) devices return [MID][DID1][DID2]
 	 */
-	if (id[1] != SPINAND_MFR_GIGADEVICE)
+
+	if (id[0] == SPINAND_MFR_GIGADEVICE)
+		did = (id[1] << 8) + id[2];
+	else if (id[0] == 0 && id[1] == SPINAND_MFR_GIGADEVICE)
+		did = id[2];
+	else
 		return 0;
 
 	ret = spinand_match_and_init(spinand, gigadevice_spinand_table,
 				     ARRAY_SIZE(gigadevice_spinand_table),
-				     id[2]);
+				     did);
 	if (ret)
 		return ret;
Signature · 1 line
2.20.1
author
#4 lore raw

Superseded by v4
https://patchwork.ozlabs.org/project/linux-mtd/list/?series=109337

which

Addresses changes in macros and related data structures introduced by
commit 377e517b5fa5
mtd: nand: Add max_bad_eraseblocks_per_lun info to memorg

Resolves issue detected by kbuild test robot
Tue, 21 May 2019 17:28:09 +0800
Tue, 21 May 2019 18:17:28 +0800

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/