arm: mach-omap2: am33xx: Init pinmux before clock
Subsystems (3)
PATCH 1/1 arm: mach-omap2: am33xx: Init pinmux before clock
The board_early_init_f() inits clock before initing pinmux. However, the clock configuration code might need to adjust PMIC settings of a PMIC on I2C bus (e.g. board/ti/am335x/board.c does that). If the I2C bus pin muxing is not configured before attempting to communicate with the PMIC, the communication will silently fail and the prcm_init() may configure fast enough CPU clock that the default voltage provided by the PMIC would be insufficient and the platform would become unstable.
--- arch/arm/mach-omap2/am33xx/board.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/mach-omap2/am33xx/board.c +1 -1
@@ -375,8 +375,8 @@ void update_rtc_magic(void)*/ int board_early_init_f (void ) { -prcm_init ();set_mux_conf_regs (); +prcm_init ();#if defined(CONFIG_SPL_BUILD ) && defined(CONFIG_SPL_RTC_DDR_SUPPORT )update_rtc_magic ();#endif
Signature · 1 line
2.20.1
PATCH 1/1 arm: mach-omap2: am33xx: Init pinmux before clock
Quoted 9 lines · Marek Vasut
The
board_early_init_f()inits clock before initing pinmux. However, the clock configuration code might need to adjust PMIC settings of a PMIC on I2C bus (e.g.board/ti/am335x/board.cdoes that). If the I2C bus pin muxing is not configured before attempting to communicate with the PMIC, the communication will silently fail and theprcm_init()may configure fast enough CPU clock that the default voltage provided by the PMIC would be insufficient and the platform would become unstable.
Quoted 3 lines
Signed-off-by Marek Vasut <[email protected]>Cc Jean-Jacques Hiblot <[email protected]>Cc Tom Rini <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190711/4a1045ce/attachment.sig>