qcow2-bitmaps: rewrite reopening logic
v2 cover qcow2-bitmaps: rewrite reopening logic
Hi all!
Bitmaps reopening is buggy, we may easily produce broken incremental backup if we do temporary snapshot. Let's fix it!
v2:
01: new
02-03: test: splat into two patches, some wording
improvements and event_wait improved
04: add John's r-b
05: new
06-09: fixes: changed, splat, use patch 01
Vladimir Sementsov-Ogievskiy (9):
block: add .bdrv_need_rw_file_child_during_reopen_rw handler python/qemu: improve event_wait method of vm
iotests: add test 255 to check bitmap life after snapshot + commit block/qcow2-bitmap: get rid of bdrv_has_changed_persistent_bitmaps block/qcow2-bitmap: drop qcow2_reopen_bitmaps_rw_hint() block/qcow2-bitmap: do not remove bitmaps on reopen-ro block/qcow2-bitmap: fix and improve qcow2_reopen_bitmaps_rw block/qcow2-bitmap: fix reopening bitmaps to RW
qcow2-bitmap: move bitmap reopen-rw code to qcow2_reopen_prepare
block/qcow2.h | 6 +- include/block/block_int.h | 8 +- include/block/dirty-bitmap.h | 1 - block.c | 163 +++++++++++++++++++++++++++------- block/dirty-bitmap.c | 12 --- block/qcow2-bitmap.c | 146 ++++++++++++++++++------------ block/qcow2.c | 9 +- python/qemu/__init__.py | 9 +- tests/qemu-iotests/255 | 86 ++++++++++++++++++ tests/qemu-iotests/255.out | 52 +++++++++++ tests/qemu-iotests/group | 1 + tests/qemu-iotests/iotests.py | 5 ++ 12 files changed, 381 insertions(+), 117 deletions(-) create mode 100755 tests/qemu-iotests/255 create mode 100644 tests/qemu-iotests/255.out
Signature · 1 line
2.18.0
PATCH v2 1/9 block: add .bdrv_need_rw_file_child_during_reopen_rw handler
On reopen to rw parent may need rw access to child in .prepare, for example qcow2 needs to write IN_USE flags into stored bitmaps (currently it is done in a hacky way after commit and don't work). So, let's introduce such logic.
The drawback is that in worst case bdrv_reopen_set_read_only may finish with error and in some intermediate state: some nodes reopened RW and some are not. But this is a way to fix bug around reopening qcow2 bitmaps in the following commits.
--- include/block/block_int.h | 2 + block.c | 144 ++++++++++++++++++++++++++++++++++---- 2 files changed, 133 insertions(+), 13 deletions(-)
include/block/block_int.h +2 -0
@@ -531,6 +531,8 @@ struct BlockDriver { uint64_t parent_perm, uint64_t parent_shared, uint64_t *nperm, uint64_t *nshared); +bool (*bdrv_need_rw_file_child_during_reopen_rw)(BlockDriverState *bs); +/** * Bitmaps should be marked as 'IN_USE' in the image on reopening image * as rw. This handler should realize it. It also should unset readonly
block.c +131 -13
194 lines not on this page · raw message
Signature · 1 line
2.18.0
PATCH v2 2/9 python/qemu: improve event_wait method of vm
In reply to Vladimir Sementsov-OgievskiySupport several names to wait for, which useful, when we don't sure which event will we get. For example when mirror fails we get BLOCK_JOB_COMPLETE otherwise we get BLOCK_JOB_READY (and only then, after completing block-job we get BLOCK_JOB_COMPLETE).
Also, add filtered version for convenient use.
--- python/qemu/__init__.py | 9 ++++++--- tests/qemu-iotests/iotests.py | 5 +++++ 2 files changed, 11 insertions(+), 3 deletions(-)
python/qemu/__init__.py +6 -3
@@ -402,7 +402,7 @@ class QEMUMachine(object): self._qmp.clear_events() return events - def event_wait(self, name, timeout=60.0, match=None): + def event_wait(self, names, timeout=60.0, match=None): """ Wait for specified timeout on named event in QMP; optionally filter results by match.
@@ -412,6 +412,9 @@ class QEMUMachine(object): {"foo": {"bar": 1}} matches {"foo": None} {"foo": {"bar": 1}} does not matches {"foo": {"baz": None}} """ + if not isinstance(names, list): + names = [names] + def event_match(event, match=None): if match is None: return True
@@ -430,14 +433,14 @@ class QEMUMachine(object): # Search cached events for event in self._events: - if (event['event'] == name) and event_match(event, match): + if (event['event'] in names) and event_match(event, match): self._events.remove(event) return event # Poll for new events while True: event = self._qmp.pull_event(wait=timeout) - if (event['event'] == name) and event_match(event, match): + if (event['event'] in names) and event_match(event, match): return event self._events.append(event)
tests/qemu-iotests/iotests.py +5 -0
@@ -532,6 +532,11 @@ class VM(qtest.QEMUQtestMachine): log(result, filters, indent=indent) return result + def event_wait_log(self, names, **kwargs): + event = self.event_wait(names, **kwargs) + log(event, filters=[filter_qmp_event]) + return event + # Returns None on success, and an error string on failure def run_job(self, job, auto_finalize=True, auto_dismiss=False): error = None
Signature · 1 line
2.18.0
Re: [Qemu-devel] [PATCH v2 2/9] python/qemu: improve event_wait method of vm
Quoted 60 lines · Vladimir Sementsov-Ogievskiy
Support several names to wait for, which useful, when we don't sure which event will we get. For example when mirror fails we get
BLOCK_JOB_COMPLETEotherwise we getBLOCK_JOB_READY(and only then, after completing block-job we getBLOCK_JOB_COMPLETE).Also, add filtered version for convenient use.
Signed-off-by Vladimir Sementsov-Ogievskiy <[email protected]>--- python/qemu/__init__.py | 9 ++++++--- tests/qemu-iotests/iotests.py | 5 +++++ 2 files changed, 11 insertions(+), 3 deletions(-)python/qemu/__init__.py +6
-3@@ -402,7 +402,7 @@ class QEMUMachine(object): self._qmp.clear_events() return events - def event_wait(self, name, timeout=60.0, match=None): + def event_wait(self, names, timeout=60.0, match=None): """ Wait for specified timeout on named event in QMP; optionally filter results by match.@@ -412,6 +412,9 @@ class QEMUMachine(object): {"foo": {"bar": 1}} matches {"foo": None} {"foo": {"bar": 1}} does not matches {"foo": {"baz": None}} """ + if not isinstance(names, list): + names = [names] + def event_match(event, match=None): if match is None: return True@@ -430,14 +433,14 @@ class QEMUMachine(object): # Search cached events for event in self._events: - if (event['event'] == name) and event_match(event, match): + if (event['event'] in names) and event_match(event, match): self._events.remove(event) return event # Poll for new events while True: event = self._qmp.pull_event(wait=timeout) - if (event['event'] == name) and event_match(event, match): + if (event['event'] in names) and event_match(event, match): return event self._events.append(event)tests/qemu-iotests/iotests.py +0
-0@@ -532,6 +532,11 @@ class VM(qtest.QEMUQtestMachine): log(result, filters, indent=indent)
tests/qemu-iotests/iotests.py class VM(qtest.QEMUQtestMachine): · line 542
Quoted 10 lines
tests/qemu-iotests/iotests.py +5
-0return result + def event_wait_log(self, names, **kwargs): + event = self.event_wait(names, **kwargs) + log(event, filters=[filter_qmp_event]) + return event + # Returns None on success, and an error string on failure def run_job(self, job, auto_finalize=True, auto_dismiss=False): error = None
There's something like this in the queue; see:
[Qemu-devel] [PATCH v3 3/5] QEMUMachine: add events_wait method.
Though yours is a lot shorter, actually, because I made separate event_wait and events_wait calls instead of just throwing non-iterables in a list.
--js
Re: [Qemu-devel] [PATCH v2 2/9] python/qemu: improve event_wait method of vm
Quoted 77 lines · John Snow
Quoted 60 lines · Vladimir Sementsov-Ogievskiy
Support several names to wait for, which useful, when we don't sure which event will we get. For example when mirror fails we get
BLOCK_JOB_COMPLETEotherwise we getBLOCK_JOB_READY(and only then, after completing block-job we getBLOCK_JOB_COMPLETE).Also, add filtered version for convenient use.
Signed-off-by Vladimir Sementsov-Ogievskiy <[email protected]>--- python/qemu/__init__.py | 9 ++++++--- tests/qemu-iotests/iotests.py | 5 +++++ 2 files changed, 11 insertions(+), 3 deletions(-)python/qemu/__init__.py +6
-3@@ -402,7 +402,7 @@ class QEMUMachine(object): self._qmp.clear_events() return events - def event_wait(self, name, timeout=60.0, match=None): + def event_wait(self, names, timeout=60.0, match=None): """ Wait for specified timeout on named event in QMP; optionally filter results by match.@@ -412,6 +412,9 @@ class QEMUMachine(object): {"foo": {"bar": 1}} matches {"foo": None} {"foo": {"bar": 1}} does not matches {"foo": {"baz": None}} """ + if not isinstance(names, list): + names = [names] + def event_match(event, match=None): if match is None: return True@@ -430,14 +433,14 @@ class QEMUMachine(object): # Search cached events for event in self._events: - if (event['event'] == name) and event_match(event, match): + if (event['event'] in names) and event_match(event, match): self._events.remove(event) return event # Poll for new events while True: event = self._qmp.pull_event(wait=timeout) - if (event['event'] == name) and event_match(event, match): + if (event['event'] in names) and event_match(event, match): return event self._events.append(event)tests/qemu-iotests/iotests.py +0
-0@@ -532,6 +532,11 @@ class VM(qtest.QEMUQtestMachine): log(result, filters, indent=indent)tests/qemu-iotests/iotests.py class VM(qtest.QEMUQtestMachine): · line 542
Quoted 10 lines
tests/qemu-iotests/iotests.py +5
-0return result + def event_wait_log(self, names, **kwargs): + event = self.event_wait(names, **kwargs) + log(event, filters=[filter_qmp_event]) + return event + # Returns None on success, and an error string on failure def run_job(self, job, auto_finalize=True, auto_dismiss=False): error = NoneThere's something like this in the queue; see:
[Qemu-devel] [PATCH v3 3/5] QEMUMachine: addevents_waitmethod.
Quoted 3 lines
Though yours is a lot shorter, actually, because I made separate
event_waitandevents_waitcalls instead of just throwing non-iterables in a list.
Hmm, it's already staged by Max. Ok, I'll rebase on it.
Signature · 2 lines
Best regards, Vladimir
PATCH v2 3/9 iotests: add test 255 to check bitmap life after snapshot + commit
In reply to Vladimir Sementsov-OgievskiyTwo testcases with persistent bitmaps are not added here, as there are bugs to be fixed soon.
--- tests/qemu-iotests/255 | 84 ++++++++++++++++++++++++++++++++++++++ tests/qemu-iotests/255.out | 17 ++++++++ tests/qemu-iotests/group | 1 + 3 files changed, 102 insertions(+) create mode 100755 tests/qemu-iotests/255 create mode 100644 tests/qemu-iotests/255.out
tests/qemu-iotests/255 new file +84 -0
@@ -0,0 +1,84 @@ +#!/usr/bin/env python +# +# Tests for temporary external snapshot when we have bitmaps. +# +# Copyright (c) 2019 Virtuozzo International GmbH. All rights reserved. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +import iotests +from iotests import qemu_img_create, file_path, log + +iotests.verify_image_format(supported_fmts=['qcow2']) + +base, top = file_path('base', 'top') +size = 64 * 1024 * 3 + + +def print_bitmap(msg, vm): + result = vm.qmp('query-block')['return'][0] + if 'dirty-bitmaps' in result: + bitmap = result['dirty-bitmaps'][0] + log('{}: name={} dirty-clusters={}'.format(msg, bitmap['name'], + bitmap['count'] // 64 // 1024)) + else: + log(msg + ': not found') + + +def test(persistent, restart): + assert persistent or not restart + log("\nTestcase {}persistent {} restart\n".format( + '' if persistent else 'non-', 'with' if restart else 'without')) + + qemu_img_create('-f', iotests.imgfmt, base, str(size)) + + vm = iotests.VM().add_drive(base) + vm.launch() + + vm.qmp_log('block-dirty-bitmap-add', node='drive0', name='bitmap0', + persistent=persistent) + vm.hmp_qemu_io('drive0', 'write 0 64K') + print_bitmap('initial bitmap', vm) + + vm.qmp_log('blockdev-snapshot-sync', device='drive0', snapshot_file=top, + format=iotests.imgfmt, filters=[iotests.filter_qmp_testfiles]) + vm.hmp_qemu_io('drive0', 'write 64K 512') + print_bitmap('check that no bitmaps are in snapshot', vm) + + if restart: + log("... Restart ...") + vm.shutdown() + vm = iotests.VM().add_drive(top) + vm.launch() + + vm.qmp_log('block-commit', device='drive0', top=top, + filters=[iotests.filter_qmp_testfiles]) + ev = vm.event_wait_log(['BLOCK_JOB_READY', 'BLOCK_JOB_COMPLETED']) + if (ev['event'] == 'BLOCK_JOB_COMPLETED'): + vm.shutdown() + log(vm.get_log()) + exit() + + vm.qmp_log('block-job-complete', device='drive0') + vm.event_wait_log('BLOCK_JOB_COMPLETED') + print_bitmap('check bitmap after commit', vm) + + vm.hmp_qemu_io('drive0', 'write 128K 64K') + print_bitmap('check updated bitmap', vm) + + vm.shutdown() + + +test(persistent=False, restart=False)
tests/qemu-iotests/255.out new file +17 -0
@@ -0,0 +1,17 @@ + +Testcase non-persistent without restart + +{"execute": "block-dirty-bitmap-add", "arguments": {"name": "bitmap0", "node": "drive0", "persistent": false}} +{"return": {}} +initial bitmap: name=bitmap0 dirty-clusters=1 +{"execute": "blockdev-snapshot-sync", "arguments": {"device": "drive0", "format": "qcow2", "snapshot-file": "TEST_DIR/PID-top"}} +{"return": {}} +check that no bitmaps are in snapshot: not found +{"execute": "block-commit", "arguments": {"device": "drive0", "top": "TEST_DIR/PID-top"}} +{"return": {}} +{"data": {"device": "drive0", "len": 65536, "offset": 65536, "speed": 0, "type": "commit"}, "event": "BLOCK_JOB_READY", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}} +{"execute": "block-job-complete", "arguments": {"device": "drive0"}} +{"return": {}} +{"data": {"device": "drive0", "len": 65536, "offset": 65536, "speed": 0, "type": "commit"}, "event": "BLOCK_JOB_COMPLETED", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}} +check bitmap after commit: name=bitmap0 dirty-clusters=2 +check updated bitmap: name=bitmap0 dirty-clusters=3
tests/qemu-iotests/group +1 -0
@@ -265,3 +265,4 @@ 252 rw auto backing quick 253 rw auto quick 254 rw auto backing quick +255 rw auto quick
Signature · 1 line
2.18.0
Re: [Qemu-devel] [PATCH v2 3/9] iotests: add test 255 to check bitmap life after snapshot + commit
Quoted 81 lines · Vladimir Sementsov-Ogievskiy
Two testcases with persistent bitmaps are not added here, as there are bugs to be fixed soon.
Signed-off-by Vladimir Sementsov-Ogievskiy <[email protected]>--- tests/qemu-iotests/255 | 84 ++++++++++++++++++++++++++++++++++++++ tests/qemu-iotests/255.out | 17 ++++++++ tests/qemu-iotests/group | 1 + 3 files changed, 102 insertions(+) create mode 100755 tests/qemu-iotests/255 create mode 100644 tests/qemu-iotests/255.outtests/qemu-iotests/255 new file +63
-0@@ -0,0 +1,84 @@ +#!/usr/bin/env python +# +# Tests for temporary external snapshot when we have bitmaps. +# +# Copyright (c) 2019 Virtuozzo International GmbH. All rights reserved. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +import iotests +from iotests import qemu_img_create, file_path, log + +iotests.verify_image_format(supported_fmts=['qcow2']) + +base, top = file_path('base', 'top') +size = 64 * 1024 * 3 + + +def print_bitmap(msg, vm): + result = vm.qmp('query-block')['return'][0] + if 'dirty-bitmaps' in result: + bitmap = result['dirty-bitmaps'][0] + log('{}: name={} dirty-clusters={}'.format(msg, bitmap['name'], + bitmap['count'] // 64 // 1024)) + else: + log(msg + ': not found') + + +def test(persistent, restart): + assert persistent or not restart + log("\nTestcase {}persistent {} restart\n".format( + '' if persistent else 'non-', 'with' if restart else 'without')) + + qemu_img_create('-f', iotests.imgfmt, base, str(size)) + + vm = iotests.VM().add_drive(base) + vm.launch() + + vm.qmp_log('block-dirty-bitmap-add', node='drive0', name='bitmap0', + persistent=persistent) + vm.hmp_qemu_io('drive0', 'write 0 64K') + print_bitmap('initial bitmap', vm) + + vm.qmp_log('blockdev-snapshot-sync', device='drive0', snapshot_file=top, + format=iotests.imgfmt, filters=[iotests.filter_qmp_testfiles]) + vm.hmp_qemu_io('drive0', 'write 64K 512') + print_bitmap('check that no bitmaps are in snapshot', vm) + + if restart: + log("... Restart ...") + vm.shutdown() + vm = iotests.VM().add_drive(top)
tests/qemu-iotests/255 line 73
Quoted 10 lines
tests/qemu-iotests/255 new file +10
-0+ vm.launch() + + vm.qmp_log('block-commit', device='drive0', top=top, + filters=[iotests.filter_qmp_testfiles]) + ev = vm.event_wait_log(['BLOCK_JOB_READY', 'BLOCK_JOB_COMPLETED']) + if (ev['event'] == 'BLOCK_JOB_COMPLETED'): + vm.shutdown() + log(vm.get_log()) + exit() +
What's the purpose of this conditional? what causes the difference in behavior that we need to handle it?
Quoted 44 lines
tests/qemu-iotests/255 new file +11
-0+ vm.qmp_log('block-job-complete', device='drive0') + vm.event_wait_log('BLOCK_JOB_COMPLETED') + print_bitmap('check bitmap after commit', vm) + + vm.hmp_qemu_io('drive0', 'write 128K 64K') + print_bitmap('check updated bitmap', vm) + + vm.shutdown() + + +test(persistent=False, restart=False)tests/qemu-iotests/255.out new file +17
-0@@ -0,0 +1,17 @@ + +Testcase non-persistent without restart + +{"execute": "block-dirty-bitmap-add", "arguments": {"name": "bitmap0", "node": "drive0", "persistent": false}} +{"return": {}} +initial bitmap: name=bitmap0 dirty-clusters=1 +{"execute": "blockdev-snapshot-sync", "arguments": {"device": "drive0", "format": "qcow2", "snapshot-file": "TEST_DIR/PID-top"}} +{"return": {}} +check that no bitmaps are in snapshot: not found +{"execute": "block-commit", "arguments": {"device": "drive0", "top": "TEST_DIR/PID-top"}} +{"return": {}} +{"data": {"device": "drive0", "len": 65536, "offset": 65536, "speed": 0, "type": "commit"}, "event": "BLOCK_JOB_READY", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}} +{"execute": "block-job-complete", "arguments": {"device": "drive0"}} +{"return": {}} +{"data": {"device": "drive0", "len": 65536, "offset": 65536, "speed": 0, "type": "commit"}, "event": "BLOCK_JOB_COMPLETED", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}} +check bitmap after commit: name=bitmap0 dirty-clusters=2 +check updated bitmap: name=bitmap0 dirty-clusters=3tests/qemu-iotests/group +1
-0@@ -265,3 +265,4 @@ 252 rw auto backing quick 253 rw auto quick 254 rw auto backing quick +255 rw auto quick
Re: [Qemu-devel] [PATCH v2 3/9] iotests: add test 255 to check bitmap life after snapshot + commit
Quoted 89 lines · John Snow
Quoted 86 lines · Vladimir Sementsov-Ogievskiy
Two testcases with persistent bitmaps are not added here, as there are bugs to be fixed soon.
Signed-off-by Vladimir Sementsov-Ogievskiy <[email protected]>--- tests/qemu-iotests/255 | 84 ++++++++++++++++++++++++++++++++++++++ tests/qemu-iotests/255.out | 17 ++++++++ tests/qemu-iotests/group | 1 + 3 files changed, 102 insertions(+)create mode 100755 tests/qemu-iotests/255
create mode 100644 tests/qemu-iotests/255.outtests/qemu-iotests/255 new file +68
-0@@ -0,0 +1,84 @@ +#!/usr/bin/env python +# +# Tests for temporary external snapshot when we have bitmaps. +# +# Copyright (c) 2019 Virtuozzo International GmbH. All rights reserved. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +import iotests +from iotests import qemu_img_create, file_path, log + +iotests.verify_image_format(supported_fmts=['qcow2']) + +base, top = file_path('base', 'top') +size = 64 * 1024 * 3 + + +def print_bitmap(msg, vm): + result = vm.qmp('query-block')['return'][0] + if 'dirty-bitmaps' in result: + bitmap = result['dirty-bitmaps'][0] + log('{}: name={} dirty-clusters={}'.format(msg, bitmap['name'], + bitmap['count'] // 64 // 1024)) + else: + log(msg + ': not found') + + +def test(persistent, restart): + assert persistent or not restart + log("\nTestcase {}persistent {} restart\n".format( + '' if persistent else 'non-', 'with' if restart else 'without')) + + qemu_img_create('-f', iotests.imgfmt, base, str(size)) + + vm = iotests.VM().add_drive(base) + vm.launch() + + vm.qmp_log('block-dirty-bitmap-add', node='drive0', name='bitmap0', + persistent=persistent) + vm.hmp_qemu_io('drive0', 'write 0 64K') + print_bitmap('initial bitmap', vm) + + vm.qmp_log('blockdev-snapshot-sync', device='drive0', snapshot_file=top, + format=iotests.imgfmt, filters=[iotests.filter_qmp_testfiles]) + vm.hmp_qemu_io('drive0', 'write 64K 512') + print_bitmap('check that no bitmaps are in snapshot', vm) + + if restart: + log("... Restart ...") + vm.shutdown() + vm = iotests.VM().add_drive(top) + vm.launch() + + vm.qmp_log('block-commit', device='drive0', top=top, + filters=[iotests.filter_qmp_testfiles]) + ev = vm.event_wait_log(['BLOCK_JOB_READY', 'BLOCK_JOB_COMPLETED'])
Quoted 8 lines
tests/qemu-iotests/255 line 73
Quoted 5 lines
tests/qemu-iotests/255 new file +5
-0+ if (ev['event'] == 'BLOCK_JOB_COMPLETED'): + vm.shutdown() + log(vm.get_log()) + exit() +What's the purpose of this conditional? what causes the difference in behavior that we need to handle it?
COMPLETED here means error. without this conditional, we'll wait 60s in next event_wait, which is very uncomfortable for debugging. Contrariwise, stop in this case is a lot better... Of course, it may be safely dropped, as test passes now.
Quoted 45 lines
Quoted 45 lines
tests/qemu-iotests/255 new file +11
-0+ vm.qmp_log('block-job-complete', device='drive0') + vm.event_wait_log('BLOCK_JOB_COMPLETED') + print_bitmap('check bitmap after commit', vm) + + vm.hmp_qemu_io('drive0', 'write 128K 64K') + print_bitmap('check updated bitmap', vm) + + vm.shutdown() + + +test(persistent=False, restart=False)tests/qemu-iotests/255.out new file +17
-0@@ -0,0 +1,17 @@ + +Testcase non-persistent without restart + +{"execute": "block-dirty-bitmap-add", "arguments": {"name": "bitmap0", "node": "drive0", "persistent": false}} +{"return": {}} +initial bitmap: name=bitmap0 dirty-clusters=1 +{"execute": "blockdev-snapshot-sync", "arguments": {"device": "drive0", "format": "qcow2", "snapshot-file": "TEST_DIR/PID-top"}} +{"return": {}} +check that no bitmaps are in snapshot: not found +{"execute": "block-commit", "arguments": {"device": "drive0", "top": "TEST_DIR/PID-top"}} +{"return": {}} +{"data": {"device": "drive0", "len": 65536, "offset": 65536, "speed": 0, "type": "commit"}, "event": "BLOCK_JOB_READY", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}} +{"execute": "block-job-complete", "arguments": {"device": "drive0"}} +{"return": {}} +{"data": {"device": "drive0", "len": 65536, "offset": 65536, "speed": 0, "type": "commit"}, "event": "BLOCK_JOB_COMPLETED", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}} +check bitmap after commit: name=bitmap0 dirty-clusters=2 +check updated bitmap: name=bitmap0 dirty-clusters=3tests/qemu-iotests/group +1
-0@@ -265,3 +265,4 @@ 252 rw auto backing quick 253 rw auto quick 254 rw auto backing quick +255 rw auto quick
Signature · 2 lines
Best regards, Vladimir
PATCH v2 4/9 block/qcow2-bitmap: get rid of bdrv_has_changed_persistent_bitmaps
In reply to Vladimir Sementsov-OgievskiyFirstly, no reason to optimize failure path. Then, function name is
ambiguous: it checks for readonly and similar things, but someone may think that it will ignore normal bitmaps which was just unchanged, and this is in bad relation with the fact that we should drop IN_USE flag for unchanged bitmaps in the image.
--- include/block/dirty-bitmap.h | 1 - block/dirty-bitmap.c | 12 ------------ block/qcow2-bitmap.c | 23 +++++++++++++---------- 3 files changed, 13 insertions(+), 23 deletions(-)
include/block/dirty-bitmap.h +0 -1
@@ -105,7 +105,6 @@ bool bdrv_has_readonly_bitmaps(BlockDriverState *bs);bool bdrv_dirty_bitmap_get_autoload (const BdrvDirtyBitmap *bitmap);bool bdrv_dirty_bitmap_get_persistence (BdrvDirtyBitmap *bitmap);bool bdrv_dirty_bitmap_inconsistent (const BdrvDirtyBitmap *bitmap); -bool bdrv_has_changed_persistent_bitmaps (BlockDriverState *bs);BdrvDirtyBitmap *bdrv_dirty_bitmap_next (BlockDriverState *bs,BdrvDirtyBitmap *bitmap);char *bdrv_dirty_bitmap_sha256 (const BdrvDirtyBitmap *bitmap,Error **errp);
block/dirty-bitmap.c +0 -12
@@ -775,18 +775,6 @@ bool bdrv_dirty_bitmap_inconsistent(const BdrvDirtyBitmap *bitmap)return bitmap->inconsistent; } -bool bdrv_has_changed_persistent_bitmaps (BlockDriverState *bs) -{ -BdrvDirtyBitmap *bm; - QLIST_FOREACH(bm, &bs->dirty_bitmaps, list) { -if (bm->persistent && !bm->readonly && !bm->migration) { -return true; - } - } - -return false; -} -BdrvDirtyBitmap *bdrv_dirty_bitmap_next (BlockDriverState *bs,BdrvDirtyBitmap *bitmap) {
block/qcow2-bitmap.c +13 -10
@@ -1456,16 +1456,7 @@ void qcow2_store_persistent_dirty_bitmaps(BlockDriverState *bs, Error **errp)Qcow2Bitmap *bm; QSIMPLEQ_HEAD(, Qcow2BitmapTable) drop_tables;Qcow2BitmapTable *tb, *tb_next; - -if (!bdrv_has_changed_persistent_bitmaps (bs)) { -/* nothing to do */ -return ; - } - -if (!can_write (bs)) { -error_setg (errp,"No write access" ); -return ; - } +bool need_write = false;QSIMPLEQ_INIT (&drop_tables);
@@ -1493,6 +1484,8 @@ void qcow2_store_persistent_dirty_bitmaps(BlockDriverState *bs, Error **errp)continue ; } + need_write = true; +if (check_constraints_on_bitmap (bs, name, granularity, errp) <0 ) {error_prepend (errp,"Bitmap '%s' doesn't satisfy the constraints: " , name);
@@ -1531,6 +1524,15 @@ void qcow2_store_persistent_dirty_bitmaps(BlockDriverState *bs, Error **errp) bm->dirty_bitmap = bitmap; } +if (!need_write) { + goto success; + } + +if (!can_write (bs)) { +error_setg (errp,"No write access" ); + goto fail; + } +/* allocate clusters and store bitmaps */ QSIMPLEQ_FOREACH(bm, bm_list, entry) {if (bm->dirty_bitmap ==NULL ) {
@@ -1572,6 +1574,7 @@ void qcow2_store_persistent_dirty_bitmaps(BlockDriverState *bs, Error **errp)bdrv_release_dirty_bitmap (bs, bm->dirty_bitmap); } +success:bitmap_list_free (bm_list);return ;
Signature · 1 line
2.18.0
PATCH v2 5/9 block/qcow2-bitmap: drop qcow2_reopen_bitmaps_rw_hint()
In reply to Vladimir Sementsov-OgievskiyThe function is unused, drop it.
--- block/qcow2.h | 2 -- block/qcow2-bitmap.c | 15 +-------------- 2 files changed, 1 insertion(+), 16 deletions(-)
block/qcow2.h +0 -2
@@ -732,8 +732,6 @@ int qcow2_check_bitmaps_refcounts(BlockDriverState *bs, BdrvCheckResult *res,bool qcow2_load_dirty_bitmaps (BlockDriverState *bs,Error **errp);Qcow2BitmapInfoList *qcow2_get_bitmap_info_list (BlockDriverState *bs,Error **errp); -int qcow2_reopen_bitmaps_rw_hint (BlockDriverState *bs,bool *header_updated, -Error **errp);int qcow2_reopen_bitmaps_rw (BlockDriverState *bs,Error **errp);int qcow2_truncate_bitmaps_check (BlockDriverState *bs,Error **errp);void qcow2_store_persistent_dirty_bitmaps (BlockDriverState *bs,Error **errp);
block/qcow2-bitmap.c +1 -14
@@ -1102,8 +1102,7 @@ Qcow2BitmapInfoList *qcow2_get_bitmap_info_list(BlockDriverState *bs,return list; } -int qcow2_reopen_bitmaps_rw_hint (BlockDriverState *bs,bool *header_updated, -Error **errp) +int qcow2_reopen_bitmaps_rw (BlockDriverState *bs,Error **errp) {BDRVQcow2State *s = bs->opaque;Qcow2BitmapList *bm_list;
@@ -1111,10 +1110,6 @@ int qcow2_reopen_bitmaps_rw_hint(BlockDriverState *bs, bool *header_updated,GSList *ro_dirty_bitmaps =NULL ;int ret =0 ; -if (header_updated !=NULL ) { - *header_updated = false; - } -if (s->nb_bitmaps ==0 ) {/* No bitmaps - nothing to do */ return 0 ;
@@ -1156,9 +1151,6 @@ int qcow2_reopen_bitmaps_rw_hint(BlockDriverState *bs, bool *header_updated,error_setg_errno (errp, -ret,"Can't update bitmap directory" ); goto out; } -if (header_updated !=NULL ) { - *header_updated = true; - }g_slist_foreach (ro_dirty_bitmaps, set_readonly_helper, false); }
@@ -1169,11 +1161,6 @@ out:return ret; } -int qcow2_reopen_bitmaps_rw (BlockDriverState *bs,Error **errp) -{ -return qcow2_reopen_bitmaps_rw_hint (bs,NULL , errp); -} -/* Checks to see if it's safe to resize bitmaps */ int qcow2_truncate_bitmaps_check (BlockDriverState *bs,Error **errp) {
Signature · 1 line
2.18.0
Re: [Qemu-devel] [PATCH v2 5/9] block/qcow2-bitmap: drop qcow2_reopen_bitmaps_rw_hint()
Quoted 26 lines · Vladimir Sementsov-Ogievskiy
The function is unused, drop it.
Signed-off-by Vladimir Sementsov-Ogievskiy <[email protected]>--- block/qcow2.h | 2 -- block/qcow2-bitmap.c | 15 +-------------- 2 files changed, 1 insertion(+), 16 deletions(-)block/qcow2.h +0
-2@@ -732,8 +732,6 @@ int qcow2_check_bitmaps_refcounts(BlockDriverState *bs, BdrvCheckResult *res,bool qcow2_load_dirty_bitmaps (BlockDriverState *bs,Error **errp);Qcow2BitmapInfoList *qcow2_get_bitmap_info_list (BlockDriverState *bs,Error **errp); -int qcow2_reopen_bitmaps_rw_hint (BlockDriverState *bs,bool *header_updated, -Error **errp);int qcow2_reopen_bitmaps_rw (BlockDriverState *bs,Error **errp);int qcow2_truncate_bitmaps_check (BlockDriverState *bs,Error **errp);void qcow2_store_persistent_dirty_bitmaps (BlockDriverState *bs,Error **errp);block/qcow2-bitmap.c +0
-0
block/qcow2-bitmap.c Qcow2BitmapInfoList *qcow2_get_bitmap_info_list(BlockDriverState *bs, · line 1105
Quoted 6 lines
block/qcow2-bitmap.c +1
-2@@ -1102,8 +1102,7 @@ Qcow2BitmapInfoList *qcow2_get_bitmap_info_list(BlockDriverState *bs,return list; } -int qcow2_reopen_bitmaps_rw_hint (BlockDriverState *bs,bool *header_updated, -Error **errp) +int qcow2_reopen_bitmaps_rw (BlockDriverState *bs,Error **errp)
Well, not used outside of this file. :)
PATCH v2 6/9 block/qcow2-bitmap: do not remove bitmaps on reopen-ro
In reply to Vladimir Sementsov-Ogievskiyqcow2_reopen_bitmaps_ro wants to store bitmaps and then mark them all readonly. But the latter don't work, as qcow2_store_persistent_dirty_bitmaps removes bitmaps after storing. It's OK for inactivation but bad idea for reopen-ro. And this leads to the following bug:
Assume we have persistent bitmap 'bitmap0'.
Create external snapshot
bitmap0 is stored and therefore removed
Commit snapshot
now we have no bitmaps
Do some writes from guest (*)
they are not marked in bitmap
Shutdown
Start
bitmap0 is loaded as valid, but it is actually broken! It misses writes (*)
Incremental backup
it will be inconsistent
So, let's stop removing bitmaps on reopen-ro. But don't rejoice:
reopening bitmaps to rw is broken too, so the whole scenario will not work after this patch and we can't enable corresponding test cases in 255 iotests still. Reopening bitmaps rw will be fixed in the following patches.
--- block/qcow2.h | 3 ++- block/qcow2-bitmap.c | 46 +++++++++++++++++++++++++++++--------------- block/qcow2.c | 2 +- 3 files changed, 34 insertions(+), 17 deletions(-)
block/qcow2.h +2 -1
@@ -734,7 +734,8 @@ Qcow2BitmapInfoList *qcow2_get_bitmap_info_list(BlockDriverState *bs, Error **errp);int qcow2_reopen_bitmaps_rw (BlockDriverState *bs,Error **errp);int qcow2_truncate_bitmaps_check (BlockDriverState *bs,Error **errp); -void qcow2_store_persistent_dirty_bitmaps (BlockDriverState *bs,Error **errp); +void qcow2_store_persistent_dirty_bitmaps (BlockDriverState *bs, +bool release_stored,Error **errp);int qcow2_reopen_bitmaps_ro (BlockDriverState *bs,Error **errp); bool qcow2_can_store_new_dirty_bitmap(BlockDriverState *bs, const char *name,
block/qcow2-bitmap.c +31 -15
65 lines not on this page · raw message
block/qcow2.c +1 -1
@@ -2344,7 +2344,7 @@ static int qcow2_inactivate(BlockDriverState *bs)int ret, result =0 ;Error *local_err =NULL ; -qcow2_store_persistent_dirty_bitmaps (bs, &local_err); +qcow2_store_persistent_dirty_bitmaps (bs, true, &local_err);if (local_err !=NULL ) { result = -EINVAL ; error_reportf_err(local_err, "Lost persistent bitmaps during "
Signature · 1 line
2.18.0
Re: [Qemu-devel] [PATCH v2 6/9] block/qcow2-bitmap: do not remove bitmaps on reopen-ro
Quoted 52 lines · Vladimir Sementsov-Ogievskiy
qcow2_reopen_bitmaps_rowants to store bitmaps and then mark them all readonly. But the latter don't work, asqcow2_store_persistent_dirty_bitmapsremoves bitmaps after storing. It's OK for inactivation but bad idea for reopen-ro. And this leads to the following bug:Assume we have persistent bitmap 'bitmap0'.
Create external snapshot
bitmap0 is stored and therefore removed
Commit snapshot
now we have no bitmaps
Do some writes from guest (*)
they are not marked in bitmap
Shutdown
Start
bitmap0 is loaded as valid, but it is actually broken! It misses writes (*)
Incremental backup
it will be inconsistentSo, let's stop removing bitmaps on reopen-ro. But don't rejoice:
reopening bitmaps to rw is broken too, so the whole scenario will not work after this patch and we can't enable corresponding test cases in 255 iotests still. Reopening bitmaps rw will be fixed in the following patches.Signed-off-by Vladimir Sementsov-Ogievskiy <[email protected]>--- block/qcow2.h | 3 ++- block/qcow2-bitmap.c | 46 +++++++++++++++++++++++++++++--------------- block/qcow2.c | 2 +- 3 files changed, 34 insertions(+), 17 deletions(-)block/qcow2.h +2
-1@@ -734,7 +734,8 @@ Qcow2BitmapInfoList *qcow2_get_bitmap_info_list(BlockDriverState *bs, Error **errp);int qcow2_reopen_bitmaps_rw (BlockDriverState *bs,Error **errp);int qcow2_truncate_bitmaps_check (BlockDriverState *bs,Error **errp); -void qcow2_store_persistent_dirty_bitmaps (BlockDriverState *bs,Error **errp); +void qcow2_store_persistent_dirty_bitmaps (BlockDriverState *bs, +bool release_stored,Error **errp);int qcow2_reopen_bitmaps_ro (BlockDriverState *bs,Error **errp); bool qcow2_can_store_new_dirty_bitmap(BlockDriverState *bs, const char *name,block/qcow2-bitmap.c +0
-0
block/qcow2-bitmap.c fail: · line 1439
Quoted 9 lines
block/qcow2-bitmap.c +5
-1@@ -1432,7 +1432,29 @@ fail:bitmap_list_free (bm_list); } -void qcow2_store_persistent_dirty_bitmaps (BlockDriverState *bs,Error **errp) +/* +* qcow2_store_persistent_dirty_bitmaps +* +* Stores persistent BdrvDirtyBitmap's. +*
No apostrophe for plural's
Quoted 6 lines
block/qcow2-bitmap.c +6
-0+* @release_stored: if true, release BdrvDirtyBitmap's after storing to the +* image. This is used in two cases, both via qcow2_inactivate: +* 1. bdrv_close: It's correct to remove bitmaps on close. +* 2. migration: If bitmaps are migrated through migration channel via +* 'dirty-bitmaps' migration capability they are not handled by this code. +* Otherwise, it's OK to drop BdrvDirtyBitmap's and reload them on
block/qcow2-bitmap.c fail: · line 1455
Quoted 10 lines
block/qcow2-bitmap.c +10
-0+* invalidation. +* +* Anyway, it's correct to remove BdrvDirtyBitmap's on inactivation, as +* inactivation means that we lose control on disk, and therefore on bitmaps, +* we should sync them and do not touch more. +* +* Contrariwise, we don't want to release any bitmaps on just reopen-to-ro, +* when we need to store them, as image is still under our control, and it's +* good to keep all the bitmaps in read-only mode. +*/
I have to admit that 'Contrariwise' is not an everyday term for me. You should keep it in here just for fun, in my opinion.
Regarding "it's good to keep all the bitmaps in read-only mode":
More directly, keeping them read-only is correct because this is what would happen if we opened the node readonly to begin with, and whether we opened directly or reopened to that state shouldn't matter for the state we get afterward.
Quoted 48 lines
block/qcow2-bitmap.c +10
-14+void qcow2_store_persistent_dirty_bitmaps (BlockDriverState *bs, +bool release_stored,Error **errp) {BdrvDirtyBitmap *bitmap;BDRVQcow2State *s = bs->opaque;@@ -1545,20 +1567,14 @@ void qcow2_store_persistent_dirty_bitmaps(BlockDriverState *bs, Error **errp)g_free (tb); } - QSIMPLEQ_FOREACH(bm, bm_list, entry) { -/* For safety, we remove bitmap after storing. -* We may be here in two cases: -* 1. bdrv_close. It's ok to drop bitmap. -* 2. inactivation. It means migration without 'dirty-bitmaps' -* capability, so bitmaps are not marked with -* BdrvDirtyBitmap.migration flags. It's not bad to drop them too, -* and reload on invalidation. -*/ -if (bm->dirty_bitmap ==NULL ) { -continue ; - } +if (release_stored) { + QSIMPLEQ_FOREACH(bm, bm_list, entry) { +if (bm->dirty_bitmap ==NULL ) { +continue ; + } -bdrv_release_dirty_bitmap (bs, bm->dirty_bitmap); +bdrv_release_dirty_bitmap (bs, bm->dirty_bitmap); + } } success:@@ -1586,7 +1602,7 @@ int qcow2_reopen_bitmaps_ro(BlockDriverState *bs, Error **errp)BdrvDirtyBitmap *bitmap;Error *local_err =NULL ; -qcow2_store_persistent_dirty_bitmaps (bs, &local_err); +qcow2_store_persistent_dirty_bitmaps (bs, false, &local_err);if (local_err !=NULL ) {error_propagate (errp, local_err);return -EINVAL ;block/qcow2.c +0
-0
block/qcow2.c static int qcow2_inactivate(BlockDriverState *bs) · line 2350
Quoted 8 lines
block/qcow2.c +1
-1@@ -2344,7 +2344,7 @@ static int qcow2_inactivate(BlockDriverState *bs)int ret, result =0 ;Error *local_err =NULL ; -qcow2_store_persistent_dirty_bitmaps (bs, &local_err); +qcow2_store_persistent_dirty_bitmaps (bs, true, &local_err);if (local_err !=NULL ) { result = -EINVAL ; error_reportf_err(local_err, "Lost persistent bitmaps during "
code:
(You can adjust the docs as you need to on further review, if any, and keep that RB. --js)
Re: [Qemu-devel] [PATCH v2 6/9] block/qcow2-bitmap: do not remove bitmaps on reopen-ro
Quoted 58 lines · John Snow
Quoted 55 lines · Vladimir Sementsov-Ogievskiy
qcow2_reopen_bitmaps_rowants to store bitmaps and then mark them all readonly. But the latter don't work, asqcow2_store_persistent_dirty_bitmapsremoves bitmaps after storing. It's OK for inactivation but bad idea for reopen-ro. And this leads to the following bug:Assume we have persistent bitmap 'bitmap0'.
Create external snapshot
bitmap0 is stored and therefore removed
Commit snapshot
now we have no bitmaps
Do some writes from guest (*)
they are not marked in bitmap
Shutdown
Start
bitmap0 is loaded as valid, but it is actually broken! It misses writes (*)
Incremental backup
it will be inconsistentSo, let's stop removing bitmaps on reopen-ro. But don't rejoice:
reopening bitmaps to rw is broken too, so the whole scenario will not work after this patch and we can't enable corresponding test cases in 255 iotests still. Reopening bitmaps rw will be fixed in the following patches.Signed-off-by Vladimir Sementsov-Ogievskiy <[email protected]>--- block/qcow2.h | 3 ++- block/qcow2-bitmap.c | 46 +++++++++++++++++++++++++++++--------------- block/qcow2.c | 2 +- 3 files changed, 34 insertions(+), 17 deletions(-)block/qcow2.h +2
-1@@ -734,7 +734,8 @@ Qcow2BitmapInfoList *qcow2_get_bitmap_info_list(BlockDriverState *bs, Error **errp);int qcow2_reopen_bitmaps_rw (BlockDriverState *bs,Error **errp);int qcow2_truncate_bitmaps_check (BlockDriverState *bs,Error **errp); -void qcow2_store_persistent_dirty_bitmaps (BlockDriverState *bs,Error **errp); +void qcow2_store_persistent_dirty_bitmaps (BlockDriverState *bs, +bool release_stored,Error **errp);int qcow2_reopen_bitmaps_ro (BlockDriverState *bs,Error **errp); bool qcow2_can_store_new_dirty_bitmap(BlockDriverState *bs, const char *name,block/qcow2-bitmap.c +0
-0@@ -1432,7 +1432,29 @@ fail:bitmap_list_free (bm_list); }
Quoted 8 lines
block/qcow2-bitmap.c fail: · line 1439
Quoted 6 lines
block/qcow2-bitmap.c +5
-1-void qcow2_store_persistent_dirty_bitmaps (BlockDriverState *bs,Error **errp) +/* +* qcow2_store_persistent_dirty_bitmaps +* +* Stores persistent BdrvDirtyBitmap's. +* No apostrophe for plural's
I always do so, as it seems strange to me to append 's' to identifiers.. Should I write it BdrvDirtyBitmaps? It sounds as some other identifier...
Quoted 18 lines
Quoted 7 lines
block/qcow2-bitmap.c +6
-0+* @release_stored: if true, release BdrvDirtyBitmap's after storing to the +* image. This is used in two cases, both via qcow2_inactivate: +* 1. bdrv_close: It's correct to remove bitmaps on close. +* 2. migration: If bitmaps are migrated through migration channel via +* 'dirty-bitmaps' migration capability they are not handled by this code. +* Otherwise, it's OK to drop BdrvDirtyBitmap's and reload them on block/qcow2-bitmap.c fail: · line 1455
Quoted 10 lines
block/qcow2-bitmap.c +10
-0+* invalidation. +* +* Anyway, it's correct to remove BdrvDirtyBitmap's on inactivation, as +* inactivation means that we lose control on disk, and therefore on bitmaps, +* we should sync them and do not touch more. +* +* Contrariwise, we don't want to release any bitmaps on just reopen-to-ro, +* when we need to store them, as image is still under our control, and it's +* good to keep all the bitmaps in read-only mode. +*/
Quoted 2 lines
I have to admit that 'Contrariwise' is not an everyday term for me. You should keep it in here just for fun, in my opinion.
Ahaha, I've just used it in my previous reply.
Quoted 6 lines
Regarding "it's good to keep all the bitmaps in read-only mode":
More directly, keeping them read-only is correct because this is what would happen if we opened the node readonly to begin with, and whether we opened directly or reopened to that state shouldn't matter for the state we get afterward.
Agree, this is better reasoning.
Quoted 59 lines
Quoted 49 lines
block/qcow2-bitmap.c +10
-14+void qcow2_store_persistent_dirty_bitmaps (BlockDriverState *bs, +bool release_stored,Error **errp) {BdrvDirtyBitmap *bitmap;BDRVQcow2State *s = bs->opaque;@@ -1545,20 +1567,14 @@ void qcow2_store_persistent_dirty_bitmaps(BlockDriverState *bs, Error **errp)g_free (tb); } - QSIMPLEQ_FOREACH(bm, bm_list, entry) { -/* For safety, we remove bitmap after storing. -* We may be here in two cases: -* 1. bdrv_close. It's ok to drop bitmap. -* 2. inactivation. It means migration without 'dirty-bitmaps' -* capability, so bitmaps are not marked with -* BdrvDirtyBitmap.migration flags. It's not bad to drop them too, -* and reload on invalidation. -*/ -if (bm->dirty_bitmap ==NULL ) { -continue ; - } +if (release_stored) { + QSIMPLEQ_FOREACH(bm, bm_list, entry) { +if (bm->dirty_bitmap ==NULL ) { +continue ; + } -bdrv_release_dirty_bitmap (bs, bm->dirty_bitmap); +bdrv_release_dirty_bitmap (bs, bm->dirty_bitmap); + } } success:@@ -1586,7 +1602,7 @@ int qcow2_reopen_bitmaps_ro(BlockDriverState *bs, Error **errp)BdrvDirtyBitmap *bitmap;Error *local_err =NULL ; -qcow2_store_persistent_dirty_bitmaps (bs, &local_err); +qcow2_store_persistent_dirty_bitmaps (bs, false, &local_err);if (local_err !=NULL ) {error_propagate (errp, local_err);return -EINVAL ;block/qcow2.c +0
-0block/qcow2.c static int qcow2_inactivate(BlockDriverState *bs) · line 2350
Quoted 8 lines
block/qcow2.c +1
-1@@ -2344,7 +2344,7 @@ static int qcow2_inactivate(BlockDriverState *bs)int ret, result =0 ;Error *local_err =NULL ; -qcow2_store_persistent_dirty_bitmaps (bs, &local_err); +qcow2_store_persistent_dirty_bitmaps (bs, true, &local_err);if (local_err !=NULL ) { result = -EINVAL ; error_reportf_err(local_err, "Lost persistent bitmaps during "code:
Quoted 5 lines
Reviewed-by John Snow <[email protected]>(You can adjust the docs as you need to on further review, if any, and keep that RB. --js)
OK, thank you!
Signature · 2 lines
Best regards, Vladimir
Re: [Qemu-devel] [PATCH v2 6/9] block/qcow2-bitmap: do not remove bitmaps on reopen-ro
Quoted 68 lines · Vladimir Sementsov-Ogievskiy
Quoted 58 lines · John Snow
Quoted 55 lines · Vladimir Sementsov-Ogievskiy
qcow2_reopen_bitmaps_rowants to store bitmaps and then mark them all readonly. But the latter don't work, asqcow2_store_persistent_dirty_bitmapsremoves bitmaps after storing. It's OK for inactivation but bad idea for reopen-ro. And this leads to the following bug:Assume we have persistent bitmap 'bitmap0'.
Create external snapshot
bitmap0 is stored and therefore removed
Commit snapshot
now we have no bitmaps
Do some writes from guest (*)
they are not marked in bitmap
Shutdown
Start
bitmap0 is loaded as valid, but it is actually broken! It misses writes (*)
Incremental backup
it will be inconsistentSo, let's stop removing bitmaps on reopen-ro. But don't rejoice:
reopening bitmaps to rw is broken too, so the whole scenario will not work after this patch and we can't enable corresponding test cases in 255 iotests still. Reopening bitmaps rw will be fixed in the following patches.Signed-off-by Vladimir Sementsov-Ogievskiy <[email protected]>--- block/qcow2.h | 3 ++- block/qcow2-bitmap.c | 46 +++++++++++++++++++++++++++++--------------- block/qcow2.c | 2 +- 3 files changed, 34 insertions(+), 17 deletions(-)block/qcow2.h +2
-1@@ -734,7 +734,8 @@ Qcow2BitmapInfoList *qcow2_get_bitmap_info_list(BlockDriverState *bs, Error **errp);int qcow2_reopen_bitmaps_rw (BlockDriverState *bs,Error **errp);int qcow2_truncate_bitmaps_check (BlockDriverState *bs,Error **errp); -void qcow2_store_persistent_dirty_bitmaps (BlockDriverState *bs,Error **errp); +void qcow2_store_persistent_dirty_bitmaps (BlockDriverState *bs, +bool release_stored,Error **errp);int qcow2_reopen_bitmaps_ro (BlockDriverState *bs,Error **errp); bool qcow2_can_store_new_dirty_bitmap(BlockDriverState *bs, const char *name,block/qcow2-bitmap.c +0
-0@@ -1432,7 +1432,29 @@ fail:bitmap_list_free (bm_list); }Quoted 8 lines
block/qcow2-bitmap.c fail: · line 1439
Quoted 6 lines
block/qcow2-bitmap.c +5
-1-void qcow2_store_persistent_dirty_bitmaps (BlockDriverState *bs,Error **errp) +/* +* qcow2_store_persistent_dirty_bitmaps +* +* Stores persistent BdrvDirtyBitmap's. +* No apostrophe for plural's
Quoted 3 lines
I always do so, as it seems strange to me to append 's' to identifiers.. Should I write it BdrvDirtyBitmaps? It sounds as some other identifier...
This is a recurring problem with English. The term "CD's" is in common usage for this reason, even though it's grammatically incorrect. Honestly, I don't have an answer for you, but you could try to avoid it:
"Stores persistent BdrvDirtyBitmap objects"
It's clunkier, but it avoids adding a plural to an identifier. In marked up text, it's not uncommon to see BdrvDirtyBitmaps, but that would look silly here.
Quoted 93 lines
Quoted 18 lines
Quoted 7 lines
block/qcow2-bitmap.c +6
-0+* @release_stored: if true, release BdrvDirtyBitmap's after storing to the +* image. This is used in two cases, both via qcow2_inactivate: +* 1. bdrv_close: It's correct to remove bitmaps on close. +* 2. migration: If bitmaps are migrated through migration channel via +* 'dirty-bitmaps' migration capability they are not handled by this code. +* Otherwise, it's OK to drop BdrvDirtyBitmap's and reload them on block/qcow2-bitmap.c fail: · line 1455
Quoted 10 lines
block/qcow2-bitmap.c +10
-0+* invalidation. +* +* Anyway, it's correct to remove BdrvDirtyBitmap's on inactivation, as +* inactivation means that we lose control on disk, and therefore on bitmaps, +* we should sync them and do not touch more. +* +* Contrariwise, we don't want to release any bitmaps on just reopen-to-ro, +* when we need to store them, as image is still under our control, and it's +* good to keep all the bitmaps in read-only mode. +*/ Quoted 2 lines
I have to admit that 'Contrariwise' is not an everyday term for me. You should keep it in here just for fun, in my opinion.
Ahaha, I've just used it in my previous reply.
Quoted 6 lines
Regarding "it's good to keep all the bitmaps in read-only mode":
More directly, keeping them read-only is correct because this is what would happen if we opened the node readonly to begin with, and whether we opened directly or reopened to that state shouldn't matter for the state we get afterward.Agree, this is better reasoning.
Quoted 61 lines
Quoted 49 lines
block/qcow2-bitmap.c +10
-14+void qcow2_store_persistent_dirty_bitmaps (BlockDriverState *bs, +bool release_stored,Error **errp) {BdrvDirtyBitmap *bitmap;BDRVQcow2State *s = bs->opaque;@@ -1545,20 +1567,14 @@ void qcow2_store_persistent_dirty_bitmaps(BlockDriverState *bs, Error **errp)g_free (tb); } - QSIMPLEQ_FOREACH(bm, bm_list, entry) { -/* For safety, we remove bitmap after storing. -* We may be here in two cases: -* 1. bdrv_close. It's ok to drop bitmap. -* 2. inactivation. It means migration without 'dirty-bitmaps' -* capability, so bitmaps are not marked with -* BdrvDirtyBitmap.migration flags. It's not bad to drop them too, -* and reload on invalidation. -*/ -if (bm->dirty_bitmap ==NULL ) { -continue ; - } +if (release_stored) { + QSIMPLEQ_FOREACH(bm, bm_list, entry) { +if (bm->dirty_bitmap ==NULL ) { +continue ; + } -bdrv_release_dirty_bitmap (bs, bm->dirty_bitmap); +bdrv_release_dirty_bitmap (bs, bm->dirty_bitmap); + } } success:@@ -1586,7 +1602,7 @@ int qcow2_reopen_bitmaps_ro(BlockDriverState *bs, Error **errp)BdrvDirtyBitmap *bitmap;Error *local_err =NULL ; -qcow2_store_persistent_dirty_bitmaps (bs, &local_err); +qcow2_store_persistent_dirty_bitmaps (bs, false, &local_err);if (local_err !=NULL ) {error_propagate (errp, local_err);return -EINVAL ;block/qcow2.c +0
-0block/qcow2.c static int qcow2_inactivate(BlockDriverState *bs) · line 2350
Quoted 8 lines
block/qcow2.c +1
-1@@ -2344,7 +2344,7 @@ static int qcow2_inactivate(BlockDriverState *bs)int ret, result =0 ;Error *local_err =NULL ; -qcow2_store_persistent_dirty_bitmaps (bs, &local_err); +qcow2_store_persistent_dirty_bitmaps (bs, true, &local_err);if (local_err !=NULL ) { result = -EINVAL ; error_reportf_err(local_err, "Lost persistent bitmaps during "code:
Reviewed-by John Snow <[email protected]>
Quoted 6 lines
Quoted 3 lines
(You can adjust the docs as you need to on further review, if any, and keep that RB. --js)
OK, thank you!
I'll get back to the rest of this soon, it looks like you haven't gotten review on the core block layer pieces, or maybe I've missed it if you have?
Re: [Qemu-devel] [PATCH v2 6/9] block/qcow2-bitmap: do not remove bitmaps on reopen-ro
Quoted 182 lines · John Snow
Quoted 68 lines · Vladimir Sementsov-Ogievskiy
Quoted 58 lines · John Snow
Quoted 55 lines · Vladimir Sementsov-Ogievskiy
qcow2_reopen_bitmaps_rowants to store bitmaps and then mark them all readonly. But the latter don't work, asqcow2_store_persistent_dirty_bitmapsremoves bitmaps after storing. It's OK for inactivation but bad idea for reopen-ro. And this leads to the following bug:Assume we have persistent bitmap 'bitmap0'.
Create external snapshot
bitmap0 is stored and therefore removed
Commit snapshot
now we have no bitmaps
Do some writes from guest (*)
they are not marked in bitmap
Shutdown
Start
bitmap0 is loaded as valid, but it is actually broken! It misses writes (*)
Incremental backup
it will be inconsistentSo, let's stop removing bitmaps on reopen-ro. But don't rejoice:
reopening bitmaps to rw is broken too, so the whole scenario will not work after this patch and we can't enable corresponding test cases in 255 iotests still. Reopening bitmaps rw will be fixed in the following patches.Signed-off-by Vladimir Sementsov-Ogievskiy <[email protected]>--- block/qcow2.h | 3 ++- block/qcow2-bitmap.c | 46 +++++++++++++++++++++++++++++--------------- block/qcow2.c | 2 +- 3 files changed, 34 insertions(+), 17 deletions(-)block/qcow2.h +2
-1@@ -734,7 +734,8 @@ Qcow2BitmapInfoList *qcow2_get_bitmap_info_list(BlockDriverState *bs, Error **errp);int qcow2_reopen_bitmaps_rw (BlockDriverState *bs,Error **errp);int qcow2_truncate_bitmaps_check (BlockDriverState *bs,Error **errp); -void qcow2_store_persistent_dirty_bitmaps (BlockDriverState *bs,Error **errp); +void qcow2_store_persistent_dirty_bitmaps (BlockDriverState *bs, +bool release_stored,Error **errp);int qcow2_reopen_bitmaps_ro (BlockDriverState *bs,Error **errp); bool qcow2_can_store_new_dirty_bitmap(BlockDriverState *bs, const char *name,block/qcow2-bitmap.c +0
-0@@ -1432,7 +1432,29 @@ fail:bitmap_list_free (bm_list); }Quoted 8 lines
block/qcow2-bitmap.c fail: · line 1439
Quoted 6 lines
block/qcow2-bitmap.c +5
-1-void qcow2_store_persistent_dirty_bitmaps (BlockDriverState *bs,Error **errp) +/* +* qcow2_store_persistent_dirty_bitmaps +* +* Stores persistent BdrvDirtyBitmap's. +* No apostrophe for plural's
Quoted 3 lines
I always do so, as it seems strange to me to append 's' to identifiers.. Should I write it BdrvDirtyBitmaps? It sounds as some other identifier...
This is a recurring problem with English. The term "CD's" is in common usage for this reason, even though it's grammatically incorrect. Honestly, I don't have an answer for you, but you could try to avoid it:
"Stores persistent BdrvDirtyBitmap objects"
It's clunkier, but it avoids adding a plural to an identifier. In marked up text, it's not uncommon to see
BdrvDirtyBitmaps, but that would look silly here.Quoted 97 lines
Quoted 18 lines
Quoted 7 lines
block/qcow2-bitmap.c +6
-0+* @release_stored: if true, release BdrvDirtyBitmap's after storing to the +* image. This is used in two cases, both via qcow2_inactivate: +* 1. bdrv_close: It's correct to remove bitmaps on close. +* 2. migration: If bitmaps are migrated through migration channel via +* 'dirty-bitmaps' migration capability they are not handled by this code. +* Otherwise, it's OK to drop BdrvDirtyBitmap's and reload them on block/qcow2-bitmap.c fail: · line 1455
Quoted 10 lines
block/qcow2-bitmap.c +10
-0+* invalidation. +* +* Anyway, it's correct to remove BdrvDirtyBitmap's on inactivation, as +* inactivation means that we lose control on disk, and therefore on bitmaps, +* we should sync them and do not touch more. +* +* Contrariwise, we don't want to release any bitmaps on just reopen-to-ro, +* when we need to store them, as image is still under our control, and it's +* good to keep all the bitmaps in read-only mode. +*/ Quoted 2 lines
I have to admit that 'Contrariwise' is not an everyday term for me. You should keep it in here just for fun, in my opinion.
Ahaha, I've just used it in my previous reply.
Quoted 6 lines
Regarding "it's good to keep all the bitmaps in read-only mode":
More directly, keeping them read-only is correct because this is what would happen if we opened the node readonly to begin with, and whether we opened directly or reopened to that state shouldn't matter for the state we get afterward.Agree, this is better reasoning.
Quoted 64 lines
Quoted 49 lines
block/qcow2-bitmap.c +10
-14+void qcow2_store_persistent_dirty_bitmaps (BlockDriverState *bs, +bool release_stored,Error **errp) {BdrvDirtyBitmap *bitmap;BDRVQcow2State *s = bs->opaque;@@ -1545,20 +1567,14 @@ void qcow2_store_persistent_dirty_bitmaps(BlockDriverState *bs, Error **errp)g_free (tb); } - QSIMPLEQ_FOREACH(bm, bm_list, entry) { -/* For safety, we remove bitmap after storing. -* We may be here in two cases: -* 1. bdrv_close. It's ok to drop bitmap. -* 2. inactivation. It means migration without 'dirty-bitmaps' -* capability, so bitmaps are not marked with -* BdrvDirtyBitmap.migration flags. It's not bad to drop them too, -* and reload on invalidation. -*/ -if (bm->dirty_bitmap ==NULL ) { -continue ; - } +if (release_stored) { + QSIMPLEQ_FOREACH(bm, bm_list, entry) { +if (bm->dirty_bitmap ==NULL ) { +continue ; + } -bdrv_release_dirty_bitmap (bs, bm->dirty_bitmap); +bdrv_release_dirty_bitmap (bs, bm->dirty_bitmap); + } } success:@@ -1586,7 +1602,7 @@ int qcow2_reopen_bitmaps_ro(BlockDriverState *bs, Error **errp)BdrvDirtyBitmap *bitmap;Error *local_err =NULL ; -qcow2_store_persistent_dirty_bitmaps (bs, &local_err); +qcow2_store_persistent_dirty_bitmaps (bs, false, &local_err);if (local_err !=NULL ) {error_propagate (errp, local_err);return -EINVAL ;block/qcow2.c +0
-0block/qcow2.c static int qcow2_inactivate(BlockDriverState *bs) · line 2350
Quoted 8 lines
block/qcow2.c +1
-1@@ -2344,7 +2344,7 @@ static int qcow2_inactivate(BlockDriverState *bs)int ret, result =0 ;Error *local_err =NULL ; -qcow2_store_persistent_dirty_bitmaps (bs, &local_err); +qcow2_store_persistent_dirty_bitmaps (bs, true, &local_err);if (local_err !=NULL ) { result = -EINVAL ; error_reportf_err(local_err, "Lost persistent bitmaps during "code:
Reviewed-by John Snow <[email protected]>(You can adjust the docs as you need to on further review, if any, and keep that RB. --js)
Quoted 6 lines
Quoted 2 lines
OK, thank you!
I'll get back to the rest of this soon, it looks like you haven't gotten review on the core block layer pieces, or maybe I've missed it if you have?
Hmm, no, I haven't.. Seems I forget about these series, it should have been pinged several days ago.
Signature · 2 lines
Best regards, Vladimir
PATCH v2 7/9 block/qcow2-bitmap: fix and improve qcow2_reopen_bitmaps_rw
In reply to Vladimir Sementsov-Ogievskiy- Correct check for write access to file child, and in correct place (only if we want to write).
- Support reopen rw -> rw (which will be used in furhter patches), for example, !bdrv_dirty_bitmap_readonly() is not a corruption if bitmap is marked IN_USE in the image.
- Consider unexpected bitmap as a corruption and check other combinations of in-image and in-RAM bitmaps.
--- block/qcow2-bitmap.c | 56 +++++++++++++++++++++++++++++--------------- 1 file changed, 37 insertions(+), 19 deletions(-)
block/qcow2-bitmap.c +37 -19
@@ -1108,18 +1108,14 @@ int qcow2_reopen_bitmaps_rw(BlockDriverState *bs, Error **errp)Qcow2BitmapList *bm_list;Qcow2Bitmap *bm;GSList *ro_dirty_bitmaps =NULL ; -int ret =0 ; +int ret = -EINVAL ; +bool need_header_update = false;if (s->nb_bitmaps ==0 ) {/* No bitmaps - nothing to do */ return 0 ; } -if (!can_write (bs)) { -error_setg (errp,"Can't write to the image on reopening bitmaps rw" ); -return -EINVAL ; - } - bm_list =bitmap_list_load (bs, s->bitmap_directory_offset, s->bitmap_directory_size, errp);if (bm_list ==NULL ) {
@@ -1128,32 +1124,54 @@ int qcow2_reopen_bitmaps_rw(BlockDriverState *bs, Error **errp) QSIMPLEQ_FOREACH(bm, bm_list, entry) {BdrvDirtyBitmap *bitmap =bdrv_find_dirty_bitmap (bs, bm->name); -if (bitmap ==NULL ) { -continue ; - } -if (!bdrv_dirty_bitmap_readonly (bitmap)) { -error_setg (errp,"Bitmap %s was loaded prior to rw-reopen, but was " -"not marked as readonly. This is a bug, something went " -"wrong. All of the bitmaps may be corrupted" , bm->name); - ret = -EINVAL ; +if (!bitmap) { +error_setg (errp,"Unexpected bitmap '%s' in the image '%s'" , + bm->name, bs->filename); goto out; } - bm->flags |=BME_FLAG_IN_USE ; - ro_dirty_bitmaps =g_slist_append (ro_dirty_bitmaps, bitmap); +if (!(bm->flags &BME_FLAG_IN_USE )) { +if (!bdrv_dirty_bitmap_readonly (bitmap)) { +error_setg (errp,"Corruption: bitmap '%s' is not marked IN_USE " +"in the image '%s' and not marked readonly in RAM" , + bm->name, bs->filename); + goto out; + } +if (bdrv_dirty_bitmap_inconsistent (bitmap)) { +error_setg (errp,"Corruption: bitmap '%s' is inconsistent but " +"is not marked IN_USE in the image '%s'" , bm->name, + bs->filename); + goto out; + } + + bm->flags |=BME_FLAG_IN_USE ; + need_header_update = true; + } + +if (bdrv_dirty_bitmap_readonly (bitmap)) { + ro_dirty_bitmaps =g_slist_append (ro_dirty_bitmaps, bitmap); + } } -if (ro_dirty_bitmaps !=NULL ) { +if (need_header_update) { +if (!can_write (bs->file->bs) || !(bs->file->perm &BLK_PERM_WRITE )) { +error_setg (errp,"Failed to reopen bitmaps rw: no write access " +"the protocol file" ); + goto out; + } +/* in_use flags must be updated */ ret =update_ext_header_and_dir_in_place (bs, bm_list);if (ret <0 ) { -error_setg_errno (errp, -ret,"Can't update bitmap directory" ); +error_setg_errno (errp, -ret,"Cannot update bitmap directory" ); goto out; } -g_slist_foreach (ro_dirty_bitmaps, set_readonly_helper, false); } +g_slist_foreach (ro_dirty_bitmaps, set_readonly_helper, false); + ret =0 ; + out:g_slist_free (ro_dirty_bitmaps);bitmap_list_free (bm_list);
Signature · 1 line
2.18.0
PATCH v2 8/9 block/qcow2-bitmap: fix reopening bitmaps to RW
In reply to Vladimir Sementsov-OgievskiyCurrently reopening bitmaps to RW can't work, as qcow2 needs write access to file child, to mark bitmaps in-image with IN_USE flag.
The possibility to write-access file child during reopen-RW was implemented several patches ago with help of .bdrv_need_rw_file_child_during_reopen_rw handler. Let's use this new API to fix bitmaps reopening.
Add corresponding test-cases to 255 iotest.
--- block/qcow2.h | 1 + block/qcow2-bitmap.c | 6 ++++++ block/qcow2.c | 1 + tests/qemu-iotests/255 | 2 ++ tests/qemu-iotests/255.out | 35 +++++++++++++++++++++++++++++++++++ 5 files changed, 45 insertions(+)
block/qcow2.h +1 -0
@@ -726,6 +726,7 @@ void *qcow2_cache_is_table_offset(Qcow2Cache *c, uint64_t offset);void qcow2_cache_discard (Qcow2Cache *c,void *table);/* qcow2-bitmap.c functions */ +bool qcow2_has_bitmaps (BlockDriverState *bs);int qcow2_check_bitmaps_refcounts (BlockDriverState *bs,BdrvCheckResult *res,void **refcount_table,int64_t *refcount_table_size);
block/qcow2-bitmap.c +6 -0
@@ -1102,6 +1102,12 @@ Qcow2BitmapInfoList *qcow2_get_bitmap_info_list(BlockDriverState *bs,return list; } +bool qcow2_has_bitmaps (BlockDriverState *bs) +{ +BDRVQcow2State *s = bs->opaque; +return s->nb_bitmaps; +} +int qcow2_reopen_bitmaps_rw (BlockDriverState *bs,Error **errp) {BDRVQcow2State *s = bs->opaque;
block/qcow2.c +1 -0
@@ -5218,6 +5218,7 @@ BlockDriver bdrv_qcow2 = { .bdrv_reopen_bitmaps_rw = qcow2_reopen_bitmaps_rw, .bdrv_can_store_new_dirty_bitmap = qcow2_can_store_new_dirty_bitmap, .bdrv_remove_persistent_dirty_bitmap = qcow2_remove_persistent_dirty_bitmap, + .bdrv_need_rw_file_child_during_reopen_rw = qcow2_has_bitmaps, };static void bdrv_qcow2_init (void )
tests/qemu-iotests/255 +2 -0
@@ -82,3 +82,5 @@ def test(persistent, restart): test(persistent=False, restart=False) +test(persistent=True, restart=False) +test(persistent=True, restart=True)
tests/qemu-iotests/255.out +35 -0
@@ -15,3 +15,38 @@ check that no bitmaps are in snapshot: not found {"data": {"device": "drive0", "len": 65536, "offset": 65536, "speed": 0, "type": "commit"}, "event": "BLOCK_JOB_COMPLETED", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}} check bitmap after commit: name=bitmap0 dirty-clusters=2 check updated bitmap: name=bitmap0 dirty-clusters=3 + +Testcase persistent without restart + +{"execute": "block-dirty-bitmap-add", "arguments": {"name": "bitmap0", "node": "drive0", "persistent": true}} +{"return": {}} +initial bitmap: name=bitmap0 dirty-clusters=1 +{"execute": "blockdev-snapshot-sync", "arguments": {"device": "drive0", "format": "qcow2", "snapshot-file": "TEST_DIR/PID-top"}} +{"return": {}} +check that no bitmaps are in snapshot: not found +{"execute": "block-commit", "arguments": {"device": "drive0", "top": "TEST_DIR/PID-top"}} +{"return": {}} +{"data": {"device": "drive0", "len": 65536, "offset": 65536, "speed": 0, "type": "commit"}, "event": "BLOCK_JOB_READY", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}} +{"execute": "block-job-complete", "arguments": {"device": "drive0"}} +{"return": {}} +{"data": {"device": "drive0", "len": 65536, "offset": 65536, "speed": 0, "type": "commit"}, "event": "BLOCK_JOB_COMPLETED", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}} +check bitmap after commit: name=bitmap0 dirty-clusters=2 +check updated bitmap: name=bitmap0 dirty-clusters=3 + +Testcase persistent with restart + +{"execute": "block-dirty-bitmap-add", "arguments": {"name": "bitmap0", "node": "drive0", "persistent": true}} +{"return": {}} +initial bitmap: name=bitmap0 dirty-clusters=1 +{"execute": "blockdev-snapshot-sync", "arguments": {"device": "drive0", "format": "qcow2", "snapshot-file": "TEST_DIR/PID-top"}} +{"return": {}} +check that no bitmaps are in snapshot: not found +... Restart ... +{"execute": "block-commit", "arguments": {"device": "drive0", "top": "TEST_DIR/PID-top"}} +{"return": {}} +{"data": {"device": "drive0", "len": 65536, "offset": 65536, "speed": 0, "type": "commit"}, "event": "BLOCK_JOB_READY", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}} +{"execute": "block-job-complete", "arguments": {"device": "drive0"}} +{"return": {}} +{"data": {"device": "drive0", "len": 65536, "offset": 65536, "speed": 0, "type": "commit"}, "event": "BLOCK_JOB_COMPLETED", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}} +check bitmap after commit: name=bitmap0 dirty-clusters=2 +check updated bitmap: name=bitmap0 dirty-clusters=3
Signature · 1 line
2.18.0
PATCH v2 9/9 qcow2-bitmap: move bitmap reopen-rw code to qcow2_reopen_prepare
In reply to Vladimir Sementsov-OgievskiySince we have used .bdrv_need_rw_file_child_during_reopen_rw handler, and have write access to file child in reopen-prepare, and we prepared qcow2_reopen_bitmaps_rw to be called from reopening rw -> rw, we now can simple move qcow2_reopen_bitmaps_rw() call to qcow2_reopen_prepare() and handle errors as befits.
Hacky handler .bdrv_reopen_bitmaps_rw is not needed more and therefore dropped.
--- include/block/block_int.h | 6 ------ block.c | 19 ------------------- block/qcow2.c | 6 +++++- 3 files changed, 5 insertions(+), 26 deletions(-)
include/block/block_int.h +0 -6
@@ -533,12 +533,6 @@ struct BlockDriver {bool (*bdrv_need_rw_file_child_during_reopen_rw)(BlockDriverState *bs); -/** -* Bitmaps should be marked as 'IN_USE' in the image on reopening image -* as rw. This handler should realize it. It also should unset readonly -* field of BlockDirtyBitmap's in case of success. -*/ -int (*bdrv_reopen_bitmaps_rw)(BlockDriverState *bs,Error **errp); bool (*bdrv_can_store_new_dirty_bitmap)(BlockDriverState *bs, const char *name, uint32_t granularity,
block.c +0 -19
@@ -3894,16 +3894,12 @@ void bdrv_reopen_commit(BDRVReopenState *reopen_state)BlockDriver *drv;BlockDriverState *bs;BdrvChild *child; -bool old_can_write, new_can_write;assert (reopen_state !=NULL ); bs = reopen_state->bs; drv = bs->drv;assert (drv !=NULL ); - old_can_write = - !bdrv_is_read_only (bs) && !(bdrv_get_flags (bs) &BDRV_O_INACTIVE ); -/* If there are any driver level actions to take */ if (drv->bdrv_reopen_commit) { drv->bdrv_reopen_commit (reopen_state);
@@ -3947,21 +3943,6 @@ void bdrv_reopen_commit(BDRVReopenState *reopen_state) }bdrv_refresh_limits (bs,NULL ); - - new_can_write = - !bdrv_is_read_only (bs) && !(bdrv_get_flags (bs) &BDRV_O_INACTIVE ); -if (!old_can_write && new_can_write && drv->bdrv_reopen_bitmaps_rw) { -Error *local_err =NULL ; -if (drv->bdrv_reopen_bitmaps_rw (bs, &local_err) <0 ) { -/* This is not fatal, bitmaps just left read-only, so all following -* writes will fail. User can remove read-only bitmaps to unblock -* writes. -*/ -error_reportf_err (local_err, -"%s: Failed to make dirty bitmaps writable: " , -bdrv_get_node_name (bs)); - } - } }/*
block/qcow2.c +5 -1
@@ -1815,6 +1815,11 @@ static int qcow2_reopen_prepare(BDRVReopenState *state,if (ret <0 ) { goto fail; } + }else { + ret =qcow2_reopen_bitmaps_rw (state->bs, errp); +if (ret <0 ) { + goto fail; + } }return 0 ;
@@ -5215,7 +5220,6 @@ BlockDriver bdrv_qcow2 = { .bdrv_detach_aio_context = qcow2_detach_aio_context, .bdrv_attach_aio_context = qcow2_attach_aio_context, - .bdrv_reopen_bitmaps_rw = qcow2_reopen_bitmaps_rw, .bdrv_can_store_new_dirty_bitmap = qcow2_can_store_new_dirty_bitmap, .bdrv_remove_persistent_dirty_bitmap = qcow2_remove_persistent_dirty_bitmap, .bdrv_need_rw_file_child_during_reopen_rw = qcow2_has_bitmaps,
Signature · 1 line
2.18.0