ARM: dts: exynos: Add GPU/Mali 400 node to Exynos3250
Subsystems (3)
Krzysztof Kozlowski
maintainerPATCH v2 1/7 ARM: dts: exynos: Add GPU/Mali 400 node to Exynos3250
Add nodes for GPU (Mali 400) to Exynos3250. This is still limited and not tested:
1. No dynamic voltage and frequency scaling,
2. Not sure what to do with CLK_G3D clock responsible for gating entire IP block (it is now being disabled as unused).
---
Changes since v1:
1. Use samsung,exynos4210-mali compatible
2. Use CLK_G3D as bus clock (clock for entire IP block)
--- arch/arm/boot/dts/exynos3250-artik5.dtsi | 5 ++++ arch/arm/boot/dts/exynos3250-monk.dts | 5 ++++ arch/arm/boot/dts/exynos3250-rinato.dts | 5 ++++ arch/arm/boot/dts/exynos3250.dtsi | 33 ++++++++++++++++++++++++ 4 files changed, 48 insertions(+)
arch/arm/boot/dts/exynos3250-artik5.dtsi +5 -0
@@ -59,6 +59,11 @@ cpu0-supply = <&buck2_reg>; }; +&gpu { + mali-supply = <&buck3_reg>; + status = "okay"; +}; + &i2c_0 { #address-cells = <1>; #size-cells = <0>;
arch/arm/boot/dts/exynos3250-monk.dts +5 -0
@@ -172,6 +172,11 @@ status = "okay"; }; +&gpu { + mali-supply = <&buck3_reg>; + status = "okay"; +}; + &hsotg { vusb_d-supply = <&ldo15_reg>; vusb_a-supply = <&ldo12_reg>;
arch/arm/boot/dts/exynos3250-rinato.dts +5 -0
@@ -244,6 +244,11 @@ }; }; +&gpu { + mali-supply = <&buck3_reg>; + status = "okay"; +}; + &i2c_0 { #address-cells = <1>; #size-cells = <0>;
arch/arm/boot/dts/exynos3250.dtsi +33 -0
@@ -126,6 +126,39 @@ }; }; + gpu: gpu@13000000 { + compatible = "samsung,exynos4210-mali", "arm,mali-400"; + reg = <0x13000000 0x10000>; + interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "gp", + "gpmmu", + "pp0", + "ppmmu0", + "pp1", + "ppmmu1", + "pp2", + "ppmmu2", + "pp3", + "ppmmu3", + "pmu"; + clocks = <&cmu CLK_G3D>, + <&cmu CLK_SCLK_G3D>; + clock-names = "bus", "core"; + power-domains = <&pd_g3d>; + status = "disabled"; + /* TODO: operating points for DVFS, assigned clock as 134 MHz */ + }; + pmu { compatible = "arm,cortex-a7-pmu"; interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
Signature · 1 line
2.17.1
Krzysztof Kozlowski
maintainerPATCH v2 2/7 ARM: dts: exynos: Add GPU/Mali 400 node to Exynos4
Add nodes for GPU (Mali 400) to Exynos4210 and Exynos4412. Describe the GPU as much as possible however still few elements are missing:
1. Exynos4210 bus clock is not described in hardware manual therefore the IP gate clock was provided,
2. Exynos4412: Not sure what to do with CLK_G3D clock responsible for gating entire IP block (it is now being disabled as unused),
3. Regulator supplies on Trats board.
Limited testing on Odroid U3 (Exynos4412).
---
Changes since v1:
1. Use samsung,exynos4210-mali compatible
2. Use CLK_G3D as bus clock (clock for entire IP block)
3. Remove some of operating points to match Mali in Tizen kernel. Previously they were taken from datasheet but this information is too generic.
4. Add 533 MHz opp to Exynos4412-prime.
--- arch/arm/boot/dts/exynos4.dtsi | 36 +++++++++++++++++++ arch/arm/boot/dts/exynos4210-origen.dts | 5 +++ arch/arm/boot/dts/exynos4210-trats.dts | 4 +++ .../boot/dts/exynos4210-universal_c210.dts | 5 +++ arch/arm/boot/dts/exynos4210.dtsi | 17 +++++++++ .../boot/dts/exynos4412-itop-scp-core.dtsi | 5 +++ arch/arm/boot/dts/exynos4412-midas.dtsi | 5 +++ .../boot/dts/exynos4412-odroid-common.dtsi | 5 +++ arch/arm/boot/dts/exynos4412-prime.dtsi | 7 ++++ arch/arm/boot/dts/exynos4412.dtsi | 25 +++++++++++++ 10 files changed, 114 insertions(+)
arch/arm/boot/dts/exynos4.dtsi +36 -0
@@ -51,6 +51,42 @@ serial3 = &serial_3; }; + gpu: gpu@13000000 { + compatible = "samsung,exynos4210-mali", "arm,mali-400"; + reg = <0x13000000 0x10000>; + interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "gp", + "gpmmu", + "pp0", + "ppmmu0", + "pp1", + "ppmmu1", + "pp2", + "ppmmu2", + "pp3", + "ppmmu3", + "pmu"; + /* + * CLK_G3D is not actually bus clock but a IP-level clock. + * The bus clock is not described in hardware manual. + */ + clocks = <&clock CLK_G3D>, + <&clock CLK_SCLK_G3D>; + clock-names = "bus", "core"; + power-domains = <&pd_g3d>; + status = "disabled"; + }; + pmu: pmu { compatible = "arm,cortex-a9-pmu"; interrupt-parent = <&combiner>;
arch/arm/boot/dts/exynos4210-origen.dts +5 -0
@@ -132,6 +132,11 @@ status = "okay"; }; +&gpu { + mali-supply = <&buck3_reg>; + status = "okay"; +}; + &hsotg { vusb_d-supply = <&ldo3_reg>; vusb_a-supply = <&ldo8_reg>;
arch/arm/boot/dts/exynos4210-trats.dts +4 -0
@@ -239,6 +239,10 @@ status = "okay"; }; +&gpu { + status = "okay"; +}; + &hsotg { vusb_d-supply = <&vusb_reg>; vusb_a-supply = <&vusbdac_reg>;
arch/arm/boot/dts/exynos4210-universal_c210.dts +5 -0
@@ -262,6 +262,11 @@ }; }; +&gpu { + mali-supply = <&buck2_reg>; + status = "okay"; +}; + &hdmi { hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default";
arch/arm/boot/dts/exynos4210.dtsi +17 -0
@@ -449,6 +449,23 @@ samsung,lcd-wb; }; +&gpu { + operating-points-v2 = <&gpu_opp_table>; + + gpu_opp_table: opp_table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + opp-microvolt = <950000>; + }; + opp-267000000 { + opp-hz = /bits/ 64 <267000000>; + opp-microvolt = <1050000>; + }; + }; +}; + &mdma1 { power-domains = <&pd_lcd0>; };
arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi +5 -0
@@ -115,6 +115,11 @@ cpu0-supply = <&buck2_reg>; }; +&gpu { + mali-supply = <&buck4_reg>; + status = "okay"; +}; + &hsotg { vusb_d-supply = <&ldo15_reg>; vusb_a-supply = <&ldo12_reg>;
arch/arm/boot/dts/exynos4412-midas.dtsi +5 -0
@@ -453,6 +453,11 @@ status = "okay"; }; +&gpu { + mali-supply = <&buck4_reg>; + status = "okay"; +}; + &hdmi { hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default";
arch/arm/boot/dts/exynos4412-odroid-common.dtsi +5 -0
@@ -229,6 +229,11 @@ assigned-clock-rates = <0>, <176000000>; }; +&gpu { + mali-supply = <&buck4_reg>; + status = "okay"; +}; + &hdmi { hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default";
arch/arm/boot/dts/exynos4412-prime.dtsi +7 -0
@@ -38,3 +38,10 @@ cooling-device = <&cpu0 15 15>, <&cpu1 15 15>, <&cpu2 15 15>, <&cpu3 15 15>; }; + +&gpu_opp_table { + opp-533000000 { + opp-hz = /bits/ 64 <533000000>; + opp-microvolt = <1075000>; + }; +};
arch/arm/boot/dts/exynos4412.dtsi +25 -0
@@ -716,6 +716,31 @@ cpu-offset = <0x4000>; }; +&gpu { + operating-points-v2 = <&gpu_opp_table>; + + gpu_opp_table: opp_table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + opp-microvolt = <875000>; + }; + opp-267000000 { + opp-hz = /bits/ 64 <267000000>; + opp-microvolt = <900000>; + }; + opp-350000000 { + opp-hz = /bits/ 64 <350000000>; + opp-microvolt = <950000>; + }; + opp-440000000 { + opp-hz = /bits/ 64 <440000000>; + opp-microvolt = <1025000>; + }; + }; +}; + &hdmi { compatible = "samsung,exynos4212-hdmi"; };
Signature · 1 line
2.17.1
Krzysztof Kozlowski
maintainerPATCH v2 3/7 arm64: dts: exynos: Add GPU/Mali T760 node to Exynos5433
In reply to Krzysztof KozlowskiAdd nodes for GPU (Mali T760) to Exynos5433. Missing element is the cooling device. Not tested on HW.
---
Changes since v1:
1. None
--- .../dts/exynos/exynos5433-tm2-common.dtsi | 5 ++ arch/arm64/boot/dts/exynos/exynos5433.dtsi | 51 +++++++++++++++++++ 2 files changed, 56 insertions(+)
arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi +5 -0
@@ -350,6 +350,11 @@ pinctrl-0 = <&te_irq>; }; +&gpu { + mali-supply = <&buck6_reg>; + status = "okay"; +}; + &hdmi { hpd-gpios = <&gpa3 0 GPIO_ACTIVE_HIGH>; status = "okay";
arch/arm64/boot/dts/exynos/exynos5433.dtsi +51 -0
57 lines not on this page · raw message
Signature · 1 line
2.17.1
Krzysztof Kozlowski
maintainerPATCH v2 4/7 arm64: dts: exynos: Add GPU/Mali T760 node to Exynos7
In reply to Krzysztof KozlowskiAdd nodes for GPU (Mali T760) to Exynos7. Current support for Exynos7 misses a lot, including proper clocks, power domains, frequency and voltage scaling and cooling. However this still can provide basic GPU description. Not tested on HW.
---
Changes since v1:
1. None
--- arch/arm64/boot/dts/exynos/exynos7-espresso.dts | 5 +++++ arch/arm64/boot/dts/exynos/exynos7.dtsi | 11 +++++++++++ 2 files changed, 16 insertions(+)
arch/arm64/boot/dts/exynos/exynos7-espresso.dts +5 -0
@@ -59,6 +59,11 @@ clock-frequency = <24000000>; }; +&gpu { + mali-supply = <&buck6_reg>; + status = "okay"; +}; + &serial_2 { status = "okay"; };
arch/arm64/boot/dts/exynos/exynos7.dtsi +11 -0
@@ -78,6 +78,17 @@ }; }; + gpu: gpu@14ac0000 { + compatible = "samsung,exynos5433-mali", "arm,mali-t760"; + reg = <0x14ac0000 0x5000>; + interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "job", "mmu", "gpu"; + status = "disabled"; + /* TODO: operating points for DVFS, cooling device */ + }; + psci { compatible = "arm,psci-0.2"; method = "smc";
Signature · 1 line
2.17.1
Krzysztof Kozlowski
maintainerPATCH v2 5/7 ARM: multi_v7_defconfig: Enable Panfrost and LIMA drivers
In reply to Krzysztof KozlowskiEnable support for Mali GPU with Panfrost and LIMA drivers. Most of Exynos chipsets come with Mali GPUs:
1. Mali 400 (Exynos3250, Exynos4210, Exynos4412),
2. Mali T628 (Exynos542x).
As Mali GPU is quite popular among ARM vendors, other platforms will benefit as well.
--- arch/arm/configs/multi_v7_defconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
arch/arm/configs/multi_v7_defconfig +2 -1
@@ -656,6 +656,8 @@ CONFIG_DRM_VC4=m CONFIG_DRM_ETNAVIV=m CONFIG_DRM_MXSFB=m CONFIG_DRM_PL111=m +CONFIG_DRM_LIMA=m +CONFIG_DRM_PANFROST=m CONFIG_FB_EFI=y CONFIG_FB_WM8505=y CONFIG_FB_SH_MOBILE_LCDC=y
@@ -940,7 +942,6 @@ CONFIG_ARCH_TEGRA_2x_SOC=y CONFIG_ARCH_TEGRA_3x_SOC=y CONFIG_ARCH_TEGRA_114_SOC=y CONFIG_ARCH_TEGRA_124_SOC=y -CONFIG_PM_DEVFREQ=y CONFIG_ARM_TEGRA_DEVFREQ=m CONFIG_TI_AEMIF=y CONFIG_IIO=y
Signature · 1 line
2.17.1
Krzysztof Kozlowski
maintainerPATCH v2 6/7 ARM: exynos_defconfig: Enable Panfrost and LIMA drivers
In reply to Krzysztof KozlowskiEnable support for Mali GPU with Panfrost and LIMA drivers. Most of Exynos chipsets come with Mali GPUs:
1. Mali 400 (Exynos3250, Exynos4210, Exynos4412),
2. Mali T628 (Exynos542x).
--- arch/arm/configs/exynos_defconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
arch/arm/configs/exynos_defconfig +2 -1
@@ -212,6 +212,8 @@ CONFIG_DRM_NXP_PTN3460=y CONFIG_DRM_PARADE_PS8622=y CONFIG_DRM_SII9234=y CONFIG_DRM_TOSHIBA_TC358764=y +CONFIG_DRM_LIMA=y +CONFIG_DRM_PANFROST=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_LCD_PLATFORM=y CONFIG_BACKLIGHT_PWM=y
@@ -284,7 +286,6 @@ CONFIG_CROS_EC_SPI=y CONFIG_COMMON_CLK_MAX77686=y CONFIG_COMMON_CLK_S2MPS11=y CONFIG_EXYNOS_IOMMU=y -CONFIG_PM_DEVFREQ=y CONFIG_DEVFREQ_GOV_PERFORMANCE=y CONFIG_DEVFREQ_GOV_POWERSAVE=y CONFIG_DEVFREQ_GOV_USERSPACE=y
Signature · 1 line
2.17.1
Krzysztof Kozlowski
maintainerPATCH v2 7/7 arm64: defconfig: Enable Panfrost driver
In reply to Krzysztof KozlowskiEnable support for Mali GPU with Panfrost driver, e.g. for Exynos5433 and Exynos7 (having Mali T760).
--- arch/arm64/configs/defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm64/configs/defconfig +1 -1
@@ -517,6 +517,7 @@ CONFIG_DRM_HISI_HIBMC=m CONFIG_DRM_HISI_KIRIN=m CONFIG_DRM_MESON=m CONFIG_DRM_PL111=m +CONFIG_DRM_PANFROST=m CONFIG_FB=y CONFIG_FB_MODE_HELPERS=y CONFIG_BACKLIGHT_GENERIC=m
@@ -717,7 +718,6 @@ CONFIG_ARCH_TEGRA_194_SOC=y CONFIG_ARCH_K3_AM6_SOC=y CONFIG_SOC_TI=y CONFIG_TI_SCI_PM_DOMAINS=y -CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y CONFIG_EXTCON_USB_GPIO=y CONFIG_EXTCON_USBC_CROS_EC=y CONFIG_MEMORY=y
Signature · 1 line
2.17.1
Re: [PATCH v2 7/7] arm64: defconfig: Enable Panfrost driver
Quoted 14 lines · Krzysztof Kozlowski
Enable support for Mali GPU with Panfrost driver, e.g. for Exynos5433 and Exynos7 (having Mali T760).
Signed-off-by Krzysztof Kozlowski <[email protected]>--- arch/arm64/configs/defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)arch/arm64/configs/defconfig +0
-0
arch/arm64/configs/defconfig CONFIG_DRM_HISI_HIBMC=m · line 520
Quoted 4 lines
arch/arm64/configs/defconfig +1
-0@@ -517,6 +517,7 @@ CONFIG_DRM_HISI_HIBMC=m CONFIG_DRM_HISI_KIRIN=m CONFIG_DRM_MESON=m CONFIG_DRM_PL111=m +CONFIG_DRM_PANFROST=m
It makes sense to enable lima for arm64 defconfig as well since it's used on number of 64-bit Allwinner SoCs.
Quoted 19 lines
arch/arm64/configs/defconfig +0
-2CONFIG_FB=y CONFIG_FB_MODE_HELPERS=y CONFIG_BACKLIGHT_GENERIC=m@@ -717,7 +718,6 @@ CONFIG_ARCH_TEGRA_194_SOC=y CONFIG_ARCH_K3_AM6_SOC=y CONFIG_SOC_TI=y CONFIG_TI_SCI_PM_DOMAINS=y -CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y CONFIG_EXTCON_USB_GPIO=y CONFIG_EXTCON_USBC_CROS_EC=y CONFIG_MEMORY=y --2.17.1
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Krzysztof Kozlowski
maintainerRe: [PATCH v2 7/7] arm64: defconfig: Enable Panfrost driver
Quoted 11 lines · Vasily Khoruzhick
Quoted 9 lines · Krzysztof Kozlowski
Enable support for Mali GPU with Panfrost driver, e.g. for Exynos5433 and Exynos7 (having Mali T760).
Signed-off-by Krzysztof Kozlowski <[email protected]>--- arch/arm64/configs/defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
Quoted 12 lines
arch/arm64/configs/defconfig CONFIG_DRM_HISI_HIBMC=m · line 520
Quoted 9 lines
arch/arm64/configs/defconfig +1
-0@@ -517,6 +517,7 @@ CONFIG_DRM_HISI_HIBMC=m CONFIG_DRM_HISI_KIRIN=m CONFIG_DRM_MESON=m CONFIG_DRM_PL111=m +CONFIG_DRM_PANFROST=mIt makes sense to enable lima for arm64 defconfig as well since it's used on number of 64-bit Allwinner SoCs.
I wasn't aware that some of ARMv8 SoCs still use Utgard. In such case it makes sense indeed, I will send a follow up.
Thanks for feedback!
Krzysztof
Krzysztof Kozlowski
maintainerPATCH v3 1/1 arm64: defconfig: Enable Panfrost and Lima drivers
In reply to Krzysztof KozlowskiEnable support for Mali GPU with Panfrost and Lima drivers for:
1. Samsung Exynos5433 and Exynos7 (having Mali T760),
2. Allwiner A64 and H5 (Mali 400/450).
---
Changes since v1:
1. Enable Lima driver
--- arch/arm64/configs/defconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
arch/arm64/configs/defconfig +2 -1
@@ -518,6 +518,8 @@ CONFIG_DRM_HISI_HIBMC=m CONFIG_DRM_HISI_KIRIN=m CONFIG_DRM_MESON=m CONFIG_DRM_PL111=m +CONFIG_DRM_LIMA=m +CONFIG_DRM_PANFROST=m CONFIG_FB=y CONFIG_FB_MODE_HELPERS=y CONFIG_BACKLIGHT_GENERIC=m
@@ -718,7 +720,6 @@ CONFIG_ARCH_TEGRA_194_SOC=y CONFIG_ARCH_K3_AM6_SOC=y CONFIG_SOC_TI=y CONFIG_TI_SCI_PM_DOMAINS=y -CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y CONFIG_EXTCON_USB_GPIO=y CONFIG_EXTCON_USBC_CROS_EC=y CONFIG_MEMORY=y
Signature · 1 line
2.17.1
Re: [PATCH v3] arm64: defconfig: Enable Panfrost and Lima drivers
Hi Krzysztof,
2019년 6월 23일 (일) 오전 4:20, Krzysztof Kozlowski <[email protected]>님이 작성:
Quoted 29 lines
Enable support for Mali GPU with Panfrost and Lima drivers for:
1. Samsung Exynos5433 and Exynos7 (having Mali T760),
2. Allwiner A64 and H5 (Mali 400/450).Signed-off-by Krzysztof Kozlowski <[email protected]>---
Changes since v1:
1. Enable Lima driver--- arch/arm64/configs/defconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)arch/arm64/configs/defconfig +2
-0@@ -518,6 +518,8 @@ CONFIG_DRM_HISI_HIBMC=m CONFIG_DRM_HISI_KIRIN=m CONFIG_DRM_MESON=m CONFIG_DRM_PL111=m +CONFIG_DRM_LIMA=m +CONFIG_DRM_PANFROST=m CONFIG_FB=y CONFIG_FB_MODE_HELPERS=y CONFIG_BACKLIGHT_GENERIC=m
arch/arm64/configs/defconfig CONFIG_ARCH_TEGRA_194_SOC=y · line 721
Quoted 4 lines
arch/arm64/configs/defconfig +0
-1@@ -718,7 +720,6 @@ CONFIG_ARCH_TEGRA_194_SOC=y CONFIG_ARCH_K3_AM6_SOC=y CONFIG_SOC_TI=y CONFIG_TI_SCI_PM_DOMAINS=y -CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
Exynos5433-tm2 board support the exynos-bus device which used the simple_ondmenad governor of devfreq. Why do you remove this configuration from the defconfig?
Quoted 6 lines
arch/arm64/configs/defconfig +0
-1CONFIG_EXTCON_USB_GPIO=y CONFIG_EXTCON_USBC_CROS_EC=y CONFIG_MEMORY=y --2.17.1
Signature · 2 lines
Best Regards, Chanwoo Choi
Krzysztof Kozlowski
maintainerRe: [PATCH v3] arm64: defconfig: Enable Panfrost and Lima drivers
Quoted 33 lines · Chanwoo Choi
Hi Krzysztof,
2019년 6월 23일 (일) 오전 4:20, Krzysztof Kozlowski <[email protected]>님이 작성:
Quoted 29 lines
Enable support for Mali GPU with Panfrost and Lima drivers for:
1. Samsung Exynos5433 and Exynos7 (having Mali T760),
2. Allwiner A64 and H5 (Mali 400/450).Signed-off-by Krzysztof Kozlowski <[email protected]>---
Changes since v1:
1. Enable Lima driver--- arch/arm64/configs/defconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)arch/arm64/configs/defconfig +2
-0@@ -518,6 +518,8 @@ CONFIG_DRM_HISI_HIBMC=m CONFIG_DRM_HISI_KIRIN=m CONFIG_DRM_MESON=m CONFIG_DRM_PL111=m +CONFIG_DRM_LIMA=m +CONFIG_DRM_PANFROST=m CONFIG_FB=y CONFIG_FB_MODE_HELPERS=y CONFIG_BACKLIGHT_GENERIC=m@@ -718,7 +720,6 @@ CONFIG_ARCH_TEGRA_194_SOC=y
Quoted 8 lines
arch/arm64/configs/defconfig CONFIG_ARCH_TEGRA_194_SOC=y · line 721
Quoted 4 lines
arch/arm64/configs/defconfig +0
-1CONFIG_ARCH_K3_AM6_SOC=y CONFIG_SOC_TI=y CONFIG_TI_SCI_PM_DOMAINS=y -CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=yExynos5433-tm2 board support the exynos-bus device which used the
simple_ondmenadgovernor of devfreq. Why do you remove this configuration from the defconfig?
It is selected by default by DRM_PANFROST. The difference is that PANFROST selects it as module. The 'y' is chosen because of:
SCSI_UFSHCD [=y] && SCSI_LOWLEVEL [=y] && SCSI [=y] && SCSI_DMA [=y]
Best regards,
Krzysztof
Re: [PATCH v3] arm64: defconfig: Enable Panfrost and Lima drivers
Quoted 43 lines · Krzysztof Kozlowski
Quoted 33 lines · Chanwoo Choi
Hi Krzysztof,
2019년 6월 23일 (일) 오전 4:20, Krzysztof Kozlowski <[email protected]>님이 작성:
Quoted 29 lines
Enable support for Mali GPU with Panfrost and Lima drivers for:
1. Samsung Exynos5433 and Exynos7 (having Mali T760),
2. Allwiner A64 and H5 (Mali 400/450).Signed-off-by Krzysztof Kozlowski <[email protected]>---
Changes since v1:
1. Enable Lima driver--- arch/arm64/configs/defconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)arch/arm64/configs/defconfig +2
-0@@ -518,6 +518,8 @@ CONFIG_DRM_HISI_HIBMC=m CONFIG_DRM_HISI_KIRIN=m CONFIG_DRM_MESON=m CONFIG_DRM_PL111=m +CONFIG_DRM_LIMA=m +CONFIG_DRM_PANFROST=m CONFIG_FB=y CONFIG_FB_MODE_HELPERS=y CONFIG_BACKLIGHT_GENERIC=m@@ -718,7 +720,6 @@ CONFIG_ARCH_TEGRA_194_SOC=yQuoted 8 lines
arch/arm64/configs/defconfig CONFIG_ARCH_TEGRA_194_SOC=y · line 721
Quoted 4 lines
arch/arm64/configs/defconfig +0
-1CONFIG_ARCH_K3_AM6_SOC=y CONFIG_SOC_TI=y CONFIG_TI_SCI_PM_DOMAINS=y -CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=yExynos5433-tm2 board support the exynos-bus device which used the
simple_ondmenadgovernor of devfreq. Why do you remove this configuration from the defconfig?
Quoted 3 lines
It is selected by default by
DRM_PANFROST. The difference is that PANFROST selects it as module. The 'y' is chosen because of:
SCSI_UFSHCD[=y] &&SCSI_LOWLEVEL[=y] && SCSI [=y] &&SCSI_DMA[=y]
When I tried to find the history of CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND for defconfig, the following patch[1] added this configuration.
[1] b972ff75f2938c39e2205c23ea0e531d36b27f86
- "arm64: defconfig: Enable UFS on msm8996"
I think that this patch will affect the opration of 'USF on msm8998'.
Signature · 8 lines
Best Regards, Chanwoo Choi Samsung Electronics _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Krzysztof Kozlowski
maintainerRe: [PATCH v3] arm64: defconfig: Enable Panfrost and Lima drivers
Quoted 49 lines · Chanwoo Choi
Quoted 43 lines · Krzysztof Kozlowski
Quoted 33 lines · Chanwoo Choi
Hi Krzysztof,
2019년 6월 23일 (일) 오전 4:20, Krzysztof Kozlowski <[email protected]>님이 작성:
Quoted 29 lines
Enable support for Mali GPU with Panfrost and Lima drivers for:
1. Samsung Exynos5433 and Exynos7 (having Mali T760),
2. Allwiner A64 and H5 (Mali 400/450).Signed-off-by Krzysztof Kozlowski <[email protected]>---
Changes since v1:
1. Enable Lima driver--- arch/arm64/configs/defconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)arch/arm64/configs/defconfig +2
-0@@ -518,6 +518,8 @@ CONFIG_DRM_HISI_HIBMC=m CONFIG_DRM_HISI_KIRIN=m CONFIG_DRM_MESON=m CONFIG_DRM_PL111=m +CONFIG_DRM_LIMA=m +CONFIG_DRM_PANFROST=m CONFIG_FB=y CONFIG_FB_MODE_HELPERS=y CONFIG_BACKLIGHT_GENERIC=m@@ -718,7 +720,6 @@ CONFIG_ARCH_TEGRA_194_SOC=yQuoted 8 lines
arch/arm64/configs/defconfig CONFIG_ARCH_TEGRA_194_SOC=y · line 721
Quoted 4 lines
arch/arm64/configs/defconfig +0
-1CONFIG_ARCH_K3_AM6_SOC=y CONFIG_SOC_TI=y CONFIG_TI_SCI_PM_DOMAINS=y -CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=yExynos5433-tm2 board support the exynos-bus device which used the
simple_ondmenadgovernor of devfreq. Why do you remove this configuration from the defconfig?Quoted 3 lines
It is selected by default by
DRM_PANFROST. The difference is that PANFROST selects it as module. The 'y' is chosen because of:
SCSI_UFSHCD[=y] &&SCSI_LOWLEVEL[=y] && SCSI [=y] &&SCSI_DMA[=y]
Quoted 6 lines
When I tried to find the history of
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMANDfor defconfig, the following patch[1] added this configuration.
[1]b972ff75f2938c39e2205c23ea0e531d36b27f86
- "arm64: defconfig: Enable UFS on msm8996"I think that this patch will affect the opration of 'USF on msm8998'.
Hi Chanwoo,
Thanks for the feedback. Unfortunately I do not see how removing a dependency will affect that SCSI_UFSHCD. The DEVFREQ_GOV_SIMPLE_ONDEMAND is still built in, exactly the same as before...
Best regards,
Krzysztof