ARM: omap3_logic: Enable OMAP EHCI support for SOM-LV Boards
PATCH 1/2 ARM: omap3_logic: Enable OMAP EHCI support for SOM-LV Boards
The SOM-LV boards support the OMAP EHCI driver using port 2. With the driver updated to support device tree, this patch sets the corresponding pin muxing for the tranceiver as well as the reset pin.
board/logicpd/omap3som/omap3logic.h +19 -0
@@ -161,12 +161,14 @@ void set_muxconf_regs(void)MUX_VAL (CP (ETK_D7_ES2 ), (IEN |PTD |DIS |M0 ));/*ETK_D7*/ MUX_VAL (CP (ETK_D8_ES2 ), (IEN |PTD |DIS |M0 ));/*ETK_D8*/ MUX_VAL (CP (ETK_D9_ES2 ), (IEN |PTD |DIS |M0 ));/*ETK_D9*/ +#ifndef CONFIG_USB_EHCI_OMAP /* Torpedo does not use EHCI_OMAP */ MUX_VAL (CP (ETK_D10_ES2 ), (IEN |PTD |DIS |M0 ));/*ETK_D10*/ MUX_VAL (CP (ETK_D11_ES2 ), (IEN |PTD |DIS |M0 ));/*ETK_D11*/ MUX_VAL (CP (ETK_D12_ES2 ), (IEN |PTD |DIS |M0 ));/*ETK_D12*/ MUX_VAL (CP (ETK_D13_ES2 ), (IEN |PTD |DIS |M0 ));/*ETK_D13*/ MUX_VAL (CP (ETK_D14_ES2 ), (IEN |PTD |DIS |M0 ));/*ETK_D14*/ MUX_VAL (CP (ETK_D15_ES2 ), (IEN |PTD |DIS |M0 ));/*ETK_D15*/ +#endif MUX_VAL (CP (D2D_MCAD1 ), (IEN |PTD |EN |M0 ));/*d2d_mcad1*/ MUX_VAL (CP (D2D_MCAD2 ), (IEN |PTD |EN |M0 ));/*d2d_mcad2*/
@@ -231,6 +233,23 @@ void set_muxconf_regs(void)MUX_VAL (CP (D2D_SREAD ), (IEN |PTD |DIS |M0 ));/*d2d_sread*/ MUX_VAL (CP (D2D_MBUSFLAG ), (IEN |PTD |DIS |M0 ));/*d2d_mbusflag*/ MUX_VAL (CP (D2D_SBUSFLAG ), (IEN |PTD |DIS |M0 ));/*d2d_sbusflag*/ + +#ifdef CONFIG_USB_EHCI_OMAP /* SOM-LV Uses EHCI-OMAP */ +MUX_VAL (CP (ETK_D14_ES2 ), (IEN |PTD |DIS |M3 ));/*HSUSB2_DATA0*/ +MUX_VAL (CP (ETK_D15_ES2 ), (IEN |PTD |DIS |M3 ));/*HSUSB2_DATA1*/ +MUX_VAL (CP (MCSPI1_CS3 ), (IEN |PTD |EN |M0 ));/*HSUSB2_DATA2*/ +MUX_VAL (CP (MCSPI2_CS1 ), (IEN |PTD |EN |M0 ));/*HSUSB2_DATA3*/ +MUX_VAL (CP (MCSPI2_SIMO ), (IEN |PTD |DIS |M0 ));/*HSUSB2_DATA4*/ +MUX_VAL (CP (MCSPI2_SOMI ), (IEN |PTD |DIS |M0 ));/*HSUSB2_DATA5*/ +MUX_VAL (CP (MCSPI2_CS0 ), (IEN |PTD |EN |M0 ));/*HSUSB2_DATA6*/ +MUX_VAL (CP (MCSPI2_CLK ), (IEN |PTD |DIS |M0 ));/*HSUSB2_DATA7*/ + MUX_VAL(CP(SYS_BOOT2), (IEN | PTD | DIS | M4)) /* GPIO_4 */ +MUX_VAL (CP (ETK_D10_ES2 ), (IDIS |PTU |DIS |M3 ));/*HSUSB2_CLK*/ +MUX_VAL (CP (ETK_D11_ES2 ), (IDIS |PTU |DIS |M3 ));/*HSUSB2_STP*/ +MUX_VAL (CP (ETK_D12_ES2 ), (IEN |PTU |DIS |M3 ));/*HSUSB2_DIR*/ +MUX_VAL (CP (ETK_D13_ES2 ), (IEN |PTD |DIS |M3 ));/*HSUSB2_NXT*/ +#endif + }#endif
include/configs/omap3_logic.h +4 -0
@@ -30,6 +30,10 @@/* I2C */ #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50/* EEPROM AT24C64 */ +#ifdef CONFIG_USB_EHCI_OMAP +#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 4 +#endif +/* Board NAND Info. */ #ifdef CONFIG_NAND #define CONFIG_SYS_MAX_NAND_DEVICE 1/* Max number of */
Signature · 1 line
2.17.1
PATCH 2/2 ARM: omap3_logic & omap35_logic: Disable OMAP EHCI for Torpedo
The OMAP35 and AM/DM37 Torpedo boards do not have a USB tranceiver connected to the USB host port, so this patch removes it from the defconfig files.
configs/omap35_logic_defconfig +1 -0
@@ -69,6 +69,7 @@ CONFIG_USB=y CONFIG_DM_USB=y # CONFIG_SPL_DM_USB is not set CONFIG_USB_EHCI_HCD=y +# CONFIG_USB_EHCI_OMAP is not set CONFIG_USB_MUSB_HOST=y CONFIG_USB_MUSB_OMAP2PLUS=y CONFIG_TWL4030_USB=y
configs/omap3_logic_defconfig +1 -0
@@ -68,6 +68,7 @@ CONFIG_USB=y CONFIG_DM_USB=y # CONFIG_SPL_DM_USB is not set CONFIG_USB_EHCI_HCD=y +# CONFIG_USB_EHCI_OMAP is not set CONFIG_USB_MUSB_HOST=y CONFIG_USB_MUSB_OMAP2PLUS=y CONFIG_TWL4030_USB=y
Signature · 1 line
2.17.1
PATCH 2/2 ARM: omap3_logic & omap35_logic: Disable OMAP EHCI for Torpedo
configs/omap35_logic_defconfig
Quoted 8 lines · Adam Ford
The OMAP35 and AM/DM37 Torpedo boards do not have a USB tranceiver connected to the USB host port, so this patch removes it from the defconfig files.
Signed-off-by Adam Ford <[email protected]>configs/omap35_logic_defconfig +0
-0
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190728/5381fc4d/attachment.sig>
PATCH 1/2 ARM: omap3_logic: Enable OMAP EHCI support for SOM-LV Boards
In reply to Adam Fordboard/logicpd/omap3som/omap3logic.h
Quoted 9 lines · Adam Ford
The SOM-LV boards support the OMAP EHCI driver using port 2. With the driver updated to support device tree, this patch sets the corresponding pin muxing for the tranceiver as well as the reset pin.
Signed-off-by Adam Ford <[email protected]>board/logicpd/omap3som/omap3logic.h +0
-0
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190728/1013315b/attachment.sig>