serial: mxc: Add compatibles to NXP's serial driver (for imx21 and imx53)
PATCH v2 1/1 serial: mxc: Add compatibles to NXP's serial driver (for imx21 and imx53)
This patch fixes not enabled uart2 (and hence serial console) on i.MX53 devices. After following commit 1d255904c306 ("ARM: dts: imx: imx53:
Synchronize iMX53 DT with Linux") from the uart2 compatible the 'fsl,imx7d-uart' has been removed (which was correct).
However, the root cause of the problem was the commit 98d62e618bb9 ("arm:
imx: add i.MX53 Beckhoff CX9020 Embedded PC") which introduced this compatible.
Moreover, without this patch all i.MX53 UARTs are not usable as neither 'fsl,imx53-uart' nor 'fsl,imx21-uart' are in compatible IDs in drivers/serial/serial_mxc.c file.
The fix is to add 'fsl,imx53-uart' and 'fsl,imx21-uart' as compatibles for the aforementioned serial driver (those are also defined in the Linux kernel).
---
Changes in v2:
- Add 'fsl,imx21-uart' to the compatible table
- Change the subject tags to 'serial: mxc:"
drivers/serial/serial_mxc.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/serial/serial_mxc.c +2 -0
@@ -342,6 +342,8 @@ static int mxc_serial_ofdata_to_platdata(struct udevice *dev) }static const struct udevice_id mxc_serial_ids[] = { + { .compatible ="fsl,imx21-uart" }, + { .compatible ="fsl,imx53-uart" }, { .compatible ="fsl,imx6sx-uart" }, { .compatible ="fsl,imx6ul-uart" }, { .compatible ="fsl,imx7d-uart" },
Signature · 1 line
2.11.0
PATCH v2 1/1 serial: mxc: Add compatibles to NXP's serial driver (for imx21 and imx53)
Quoted 13 lines · Lukasz Majewski
This patch fixes not enabled uart2 (and hence serial console) on i.MX53 devices. After following commit
1d255904c306("ARM: dts: imx: imx53:
Synchronize iMX53 DT with Linux") from the uart2 compatible the 'fsl,imx7d-uart' has been removed (which was correct).However, the root cause of the problem was the commit
98d62e618bb9("arm:
imx: add i.MX53 Beckhoff CX9020 Embedded PC") which introduced this compatible.Moreover, without this patch all i.MX53 UARTs are not usable as neither 'fsl,imx53-uart' nor 'fsl,imx21-uart' are in compatible IDs in
drivers/serial/serial_mxc.cfile.
Quoted 5 lines
The fix is to add 'fsl,imx53-uart' and 'fsl,imx21-uart' as compatibles for the aforementioned serial driver (those are also defined in the Linux kernel).
Signed-off-by Lukasz Majewski <[email protected]>
PATCH v2 1/1 serial: mxc: Add compatibles to NXP's serial driver (for imx21 and imx53)
In reply to Lukasz MajewskiQuoted 13 lines
This patch fixes not enabled uart2 (and hence serial console) on i.MX53 devices. After following commit
1d255904c306("ARM: dts: imx: imx53:
Synchronize iMX53 DT with Linux") from the uart2 compatible the 'fsl,imx7d-uart' has been removed (which was correct). However, the root cause of the problem was the commit98d62e618bb9("arm:
imx: add i.MX53 Beckhoff CX9020 Embedded PC") which introduced this compatible.
Moreover, without this patch all i.MX53 UARTs are not usable as neither 'fsl,imx53-uart' nor 'fsl,imx21-uart' are in compatible IDs indrivers/serial/serial_mxc.cfile.
The fix is to add 'fsl,imx53-uart' and 'fsl,imx21-uart' as compatibles for the aforementioned serial driver (those are also defined in the Linux kernel).
Quoted 2 lines
Signed-off-by Lukasz Majewski <[email protected]>Acked-by Marek Vasut <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================