Panel rotation patches
Subsystems (7)
v7 cover Panel rotation patches
This adds the plumbing for reading panel rotation from the devicetree and sets up adding a panel property for the panel orientation on Mediatek SoCs when a rotation is present.
v7 changes:
-forgot to add static inline
v6 changes:
-added enum declaration to drm_panel.h header
v5 changes:
-rebased
v4 changes:
-fixed some changes made to the i915 driver
-clarified comments on of orientation helper
v3 changes:
-changed from attach/detach callbacks to directly setting fixed panel
values in drm_panel_attach
-removed update to Documentation
-added separate function for quirked panel orientation property init
v2 changes:
fixed build errors in i915
Derek Basehore (4):
drm/panel: Add helper for reading DT rotation drm/panel: set display info in panel attach drm/connector: Split out orientation quirk detection drm/mtk: add panel orientation property
drivers/gpu/drm/drm_connector.c | 45 ++++++++++++++----- drivers/gpu/drm/drm_panel.c | 70 ++++++++++++++++++++++++++++++ drivers/gpu/drm/i915/intel_dp.c | 4 +- drivers/gpu/drm/i915/vlv_dsi.c | 5 +-- drivers/gpu/drm/mediatek/mtk_dsi.c | 8 ++++ include/drm/drm_connector.h | 2 + include/drm/drm_panel.h | 21 +++++++++ 7 files changed, 138 insertions(+), 17 deletions(-)
Signature · 1 line
2.22.0.410.gd8fdbe21b5-goog
PATCH v7 1/4 drm/panel: Add helper for reading DT rotation
This adds a helper function for reading the rotation (panel orientation) from the device tree.
--- drivers/gpu/drm/drm_panel.c | 43 +++++++++++++++++++++++++++++++++++++ include/drm/drm_panel.h | 9 ++++++++ 2 files changed, 52 insertions(+)
drivers/gpu/drm/drm_panel.c +43 -0
@@ -172,6 +172,49 @@ struct drm_panel *of_drm_find_panel(const struct device_node *np)return ERR_PTR (-EPROBE_DEFER ); }EXPORT_SYMBOL (of_drm_find_panel); + +/** +* of_drm_get_panel_orientation - look up the orientation of the panel through +* the "rotation" binding from a device tree node +* @np: device tree node of the panel +* @orientation: orientation enum to be filled in +* +* Looks up the rotation of a panel in the device tree. The orientation of the +* panel is expressed as a property name "rotation" in the device tree. The +* rotation in the device tree is counter clockwise. +* +* Return: 0 when a valid rotation value (0, 90, 180, or 270) is read or the +* rotation property doesn't exist. -EERROR otherwise. +*/ +int of_drm_get_panel_orientation (const struct device_node *np, +enum drm_panel_orientation *orientation) +{ +int rotation, ret; + + ret =of_property_read_u32 (np,"rotation" , &rotation); +if (ret == -EINVAL ) { +/* Don't return an error if there's no rotation property. */ + *orientation =DRM_MODE_PANEL_ORIENTATION_UNKNOWN ; +return 0 ; + } + +if (ret <0 ) +return ret; + +if (rotation ==0 ) + *orientation =DRM_MODE_PANEL_ORIENTATION_NORMAL ; +else if (rotation ==90 ) + *orientation =DRM_MODE_PANEL_ORIENTATION_RIGHT_UP ; +else if (rotation ==180 ) + *orientation =DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP ; +else if (rotation ==270 ) + *orientation =DRM_MODE_PANEL_ORIENTATION_LEFT_UP ; +else +return -EINVAL ; + +return 0 ; +} +EXPORT_SYMBOL (of_drm_get_panel_orientation);#endif MODULE_AUTHOR ("Thierry Reding <[email protected]>" );
include/drm/drm_panel.h +9 -0
@@ -33,6 +33,8 @@ struct drm_device;struct drm_panel ;struct display_timing ; +enum drm_panel_orientation ; +/** * struct drm_panel_funcs - perform operations on a given panel * @disable: disable panel (turn off back light, etc.)
@@ -197,11 +199,18 @@ int drm_panel_detach(struct drm_panel *panel);#if defined(CONFIG_OF ) && defined(CONFIG_DRM_PANEL )struct drm_panel *of_drm_find_panel (const struct device_node *np); +int of_drm_get_panel_orientation (const struct device_node *np, +enum drm_panel_orientation *orientation);#else static inline struct drm_panel *of_drm_find_panel (const struct device_node *np) {return ERR_PTR (-ENODEV ); } +static inline int of_drm_get_panel_orientation (const struct device_node *np, +enum drm_panel_orientation *orientation) +{ +return -ENODEV ; +}#endif #endif
Signature · 1 line
2.22.0.410.gd8fdbe21b5-goog
PATCH v7 2/4 drm/panel: set display info in panel attach
In reply to Derek BasehoreDevicetree systems can set panel orientation via a panel binding, but there's no way, as is, to propagate this setting to the connector, where the property need to be added.
To address this, this patch sets orientation, as well as other fixed values for the panel, in the drm_panel_attach function. These values are stored from probe in the drm_panel struct.
--- drivers/gpu/drm/drm_panel.c | 28 ++++++++++++++++++++++++++++ include/drm/drm_panel.h | 14 ++++++++++++++ 2 files changed, 42 insertions(+)
drivers/gpu/drm/drm_panel.c +28 -0
@@ -104,11 +104,23 @@ EXPORT_SYMBOL(drm_panel_remove);*/ int drm_panel_attach (struct drm_panel *panel,struct drm_connector *connector) { +struct drm_display_info *info; +if (panel->connector)return -EBUSY ; panel->connector = connector; panel->drm = connector->dev; + info = &connector->display_info; + info->width_mm = panel->width_mm; + info->height_mm = panel->height_mm; + info->bpc = panel->bpc; + info->panel_orientation = panel->orientation; + info->bus_flags = panel->bus_flags; +if (panel->bus_formats) +drm_display_info_set_bus_formats (&connector->display_info, + panel->bus_formats, + panel->num_bus_formats);return 0 ; }
@@ -128,6 +140,22 @@ EXPORT_SYMBOL(drm_panel_attach);*/ int drm_panel_detach (struct drm_panel *panel) { +struct drm_display_info *info; + +if (!panel->connector) + goto out; + + info = &panel->connector->display_info; + info->width_mm =0 ; + info->height_mm =0 ; + info->bpc =0 ; + info->panel_orientation =DRM_MODE_PANEL_ORIENTATION_UNKNOWN ; + info->bus_flags =0 ; +kfree (info->bus_formats); + info->bus_formats =NULL ; + info->num_bus_formats =0 ; + +out: panel->connector =NULL ; panel->drm =NULL ;
include/drm/drm_panel.h +14 -0
@@ -39,6 +39,8 @@ enum drm_panel_orientation;* struct drm_panel_funcs - perform operations on a given panel * @disable: disable panel (turn off back light, etc.) * @unprepare: turn off panel +* @detach: detach panel->connector (clear internal state, etc.) +* @attach: attach panel->connector (update internal state, etc.) * @prepare: turn on panel and perform set up * @enable: enable panel (turn on back light, etc.) * @get_modes: add modes to the connector that the panel is attached to and
@@ -95,6 +97,18 @@ struct drm_panel {const struct drm_panel_funcs *funcs; +/* +* panel information to be set in the connector when the panel is +* attached. +*/ +unsigned int width_mm; +unsigned int height_mm; +unsigned int bpc; +int orientation; +const u32 *bus_formats; +unsigned int num_bus_formats; +u32 bus_flags; +struct list_head list; };
Signature · 6 lines
2.22.0.410.gd8fdbe21b5-goog _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH v7 2/4] drm/panel: set display info in panel attach
Hi Derek.
Quoted 6 lines · Derek Basehore
Devicetree systems can set panel orientation via a panel binding, but there's no way, as is, to propagate this setting to the connector, where the property need to be added.
To address this, this patch sets orientation, as well as other fixed values for the panel, in thedrm_panel_attachfunction. These values are stored from probe in thedrm_panelstruct.
This approch seems to conflict with work done by Laurent where the ownership/creation of the connector will be moved to the display controller.
If I understand it correct then there should not be a 1:1 relation between a panel and a connector anymore.
We should not try to work in two different directions with this. Laurent, can you comment on this?
If we move forard with this patch, then all fields in drm_panel needs kernel-doc - preferably inline.
Sam
Quoted 97 lines
Signed-off-by Derek Basehore <[email protected]>--- drivers/gpu/drm/drm_panel.c | 28 ++++++++++++++++++++++++++++ include/drm/drm_panel.h | 14 ++++++++++++++ 2 files changed, 42 insertions(+)drivers/gpu/drm/drm_panel.c +28
-0@@ -104,11 +104,23 @@ EXPORT_SYMBOL(drm_panel_remove);*/ int drm_panel_attach (struct drm_panel *panel,struct drm_connector *connector) { +struct drm_display_info *info; +if (panel->connector)return -EBUSY ; panel->connector = connector; panel->drm = connector->dev; + info = &connector->display_info; + info->width_mm = panel->width_mm; + info->height_mm = panel->height_mm; + info->bpc = panel->bpc; + info->panel_orientation = panel->orientation; + info->bus_flags = panel->bus_flags; +if (panel->bus_formats) +drm_display_info_set_bus_formats (&connector->display_info, + panel->bus_formats, + panel->num_bus_formats);return 0 ; }@@ -128,6 +140,22 @@ EXPORT_SYMBOL(drm_panel_attach);*/ int drm_panel_detach (struct drm_panel *panel) { +struct drm_display_info *info; + +if (!panel->connector) + goto out; + + info = &panel->connector->display_info; + info->width_mm =0 ; + info->height_mm =0 ; + info->bpc =0 ; + info->panel_orientation =DRM_MODE_PANEL_ORIENTATION_UNKNOWN ; + info->bus_flags =0 ; +kfree (info->bus_formats); + info->bus_formats =NULL ; + info->num_bus_formats =0 ; + +out: panel->connector =NULL ; panel->drm =NULL ;include/drm/drm_panel.h +14
-0@@ -39,6 +39,8 @@ enum drm_panel_orientation;* struct drm_panel_funcs - perform operations on a given panel * @disable: disable panel (turn off back light, etc.) * @unprepare: turn off panel +* @detach: detach panel->connector (clear internal state, etc.) +* @attach: attach panel->connector (update internal state, etc.) * @prepare: turn on panel and perform set up * @enable: enable panel (turn on back light, etc.) * @get_modes: add modes to the connector that the panel is attached to and @@ -95,6 +97,18 @@ struct drm_panel {const struct drm_panel_funcs *funcs; +/* +* panel information to be set in the connector when the panel is +* attached. +*/ +unsigned int width_mm; +unsigned int height_mm; +unsigned int bpc; +int orientation; +const u32 *bus_formats; +unsigned int num_bus_formats; +u32 bus_flags; +struct list_head list; };Signature · 6 lines
2.22.0.410.gd8fdbe21b5-goog _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH v7 2/4] drm/panel: set display info in panel attach
Hi Sam, thanks for pointing out the potential conflict.
Quoted 11 lines · Sam Ravnborg
Hi Derek.
Quoted 6 lines · Derek Basehore
Devicetree systems can set panel orientation via a panel binding, but there's no way, as is, to propagate this setting to the connector, where the property need to be added.
To address this, this patch sets orientation, as well as other fixed values for the panel, in thedrm_panel_attachfunction. These values are stored from probe in thedrm_panelstruct.
Quoted 5 lines
This approch seems to conflict with work done by Laurent where the ownership/creation of the connector will be moved to the display controller.
If I understand it correct then there should not be a 1:1 relation between a panel and a connector anymore.
Can you point me to this work? I still see the lone drm_display_info struct in the drm_connector struct. This seems to indicate that the kernel still assume one display per connector.
Quoted 99 lines
We should not try to work in two different directions with this. Laurent, can you comment on this?
If we move forard with this patch, then all fields in
drm_panelneeds kernel-doc - preferably inline.Sam
Quoted 90 lines
Signed-off-by Derek Basehore <[email protected]>--- drivers/gpu/drm/drm_panel.c | 28 ++++++++++++++++++++++++++++ include/drm/drm_panel.h | 14 ++++++++++++++ 2 files changed, 42 insertions(+)drivers/gpu/drm/drm_panel.c +28
-0@@ -104,11 +104,23 @@ EXPORT_SYMBOL(drm_panel_remove);*/ int drm_panel_attach (struct drm_panel *panel,struct drm_connector *connector) { +struct drm_display_info *info; +if (panel->connector)return -EBUSY ; panel->connector = connector; panel->drm = connector->dev; + info = &connector->display_info; + info->width_mm = panel->width_mm; + info->height_mm = panel->height_mm; + info->bpc = panel->bpc; + info->panel_orientation = panel->orientation; + info->bus_flags = panel->bus_flags; +if (panel->bus_formats) +drm_display_info_set_bus_formats (&connector->display_info, + panel->bus_formats, + panel->num_bus_formats);return 0 ; }@@ -128,6 +140,22 @@ EXPORT_SYMBOL(drm_panel_attach);*/ int drm_panel_detach (struct drm_panel *panel) { +struct drm_display_info *info; + +if (!panel->connector) + goto out; + + info = &panel->connector->display_info; + info->width_mm =0 ; + info->height_mm =0 ; + info->bpc =0 ; + info->panel_orientation =DRM_MODE_PANEL_ORIENTATION_UNKNOWN ; + info->bus_flags =0 ; +kfree (info->bus_formats); + info->bus_formats =NULL ; + info->num_bus_formats =0 ; + +out: panel->connector =NULL ; panel->drm =NULL ;include/drm/drm_panel.h +14
-0@@ -39,6 +39,8 @@ enum drm_panel_orientation;* struct drm_panel_funcs - perform operations on a given panel * @disable: disable panel (turn off back light, etc.) * @unprepare: turn off panel +* @detach: detach panel->connector (clear internal state, etc.) +* @attach: attach panel->connector (update internal state, etc.) * @prepare: turn on panel and perform set up * @enable: enable panel (turn on back light, etc.) * @get_modes: add modes to the connector that the panel is attached to and @@ -95,6 +97,18 @@ struct drm_panel {const struct drm_panel_funcs *funcs; +/* +* panel information to be set in the connector when the panel is +* attached. +*/ +unsigned int width_mm; +unsigned int height_mm; +unsigned int bpc; +int orientation; +const u32 *bus_formats; +unsigned int num_bus_formats; +u32 bus_flags; +struct list_head list; };
Quoted 7 lines
Quoted 7 lines
--
2.22.0.410.gd8fdbe21b5-goog_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH v7 2/4] drm/panel: set display info in panel attach
Hi Derek.
Quoted 14 lines · dbasehore .
Hi Sam, thanks for pointing out the potential conflict.
Quoted 11 lines · Sam Ravnborg
Hi Derek.
Quoted 6 lines · Derek Basehore
Devicetree systems can set panel orientation via a panel binding, but there's no way, as is, to propagate this setting to the connector, where the property need to be added.
To address this, this patch sets orientation, as well as other fixed values for the panel, in thedrm_panel_attachfunction. These values are stored from probe in thedrm_panelstruct.
Quoted 8 lines
Quoted 5 lines
This approch seems to conflict with work done by Laurent where the ownership/creation of the connector will be moved to the display controller.
If I understand it correct then there should not be a 1:1 relation between a panel and a connector anymore.
Can you point me to this work?
Please take a look at the series with subject:
"[PATCH 00/60] drm/omap: Replace custom display drivers with drm_bridge and drm_panel"
Laurent has done a great job explaining the background,
If you look into the patched you will see the idea is that a drm_panel no longer get attached to a drm_controller - it will be an argument to get_modes().
Sam
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v7 3/4 drm/connector: Split out orientation quirk detection
In reply to Derek BasehoreNot every platform needs quirk detection for panel orientation, so split the drm_connector_init_panel_orientation_property into two functions. One for platforms without the need for quirks, and the other for platforms that need quirks.
--- drivers/gpu/drm/drm_connector.c | 45 ++++++++++++++++++------- drivers/gpu/drm/i915/display/intel_dp.c | 4 +-- drivers/gpu/drm/i915/display/vlv_dsi.c | 2 +- include/drm/drm_connector.h | 2 ++ 4 files changed, 38 insertions(+), 15 deletions(-)
drivers/gpu/drm/drm_connector.c +33 -12
@@ -1892,31 +1892,23 @@ EXPORT_SYMBOL(drm_connector_set_vrr_capable_property);* drm_connector_init_panel_orientation_property - * initialize the connecters panel_orientation property * @connector: connector for which to init the panel-orientation property. -* @width: width in pixels of the panel, used for panel quirk detection -* @height: height in pixels of the panel, used for panel quirk detection * * This function should only be called for built-in panels, after setting * connector->display_info.panel_orientation first (if known). * -* This function will check for platform specific (e.g. DMI based) quirks -* overriding display_info.panel_orientation first, then if panel_orientation -* is not DRM_MODE_PANEL_ORIENTATION_UNKNOWN it will attach the -* "panel orientation" property to the connector. +* This function will check if the panel_orientation is not +* DRM_MODE_PANEL_ORIENTATION_UNKNOWN. If not, it will attach the "panel +* orientation" property to the connector. * * Returns: * Zero on success, negative errno on failure. */ int drm_connector_init_panel_orientation_property ( -struct drm_connector *connector,int width,int height) +struct drm_connector *connector) {struct drm_device *dev = connector->dev;struct drm_display_info *info = &connector->display_info;struct drm_property *prop; -int orientation_quirk; - - orientation_quirk =drm_get_panel_orientation_quirk (width, height); -if (orientation_quirk !=DRM_MODE_PANEL_ORIENTATION_UNKNOWN ) - info->panel_orientation = orientation_quirk;if (info->panel_orientation ==DRM_MODE_PANEL_ORIENTATION_UNKNOWN )return 0 ;
@@ -1939,6 +1931,35 @@ int drm_connector_init_panel_orientation_property( }EXPORT_SYMBOL (drm_connector_init_panel_orientation_property); +/** +* drm_connector_init_panel_orientation_property_quirk - +* initialize the connecters panel_orientation property with a quirk +* override +* @connector: connector for which to init the panel-orientation property. +* @width: width in pixels of the panel, used for panel quirk detection +* @height: height in pixels of the panel, used for panel quirk detection +* +* This function will check for platform specific (e.g. DMI based) quirks +* overriding display_info.panel_orientation first, then if panel_orientation +* is not DRM_MODE_PANEL_ORIENTATION_UNKNOWN it will attach the +* "panel orientation" property to the connector. +* +* Returns: +* Zero on success, negative errno on failure. +*/ +int drm_connector_init_panel_orientation_property_quirk ( +struct drm_connector *connector,int width,int height) +{ +int orientation_quirk; + + orientation_quirk =drm_get_panel_orientation_quirk (width, height); +if (orientation_quirk !=DRM_MODE_PANEL_ORIENTATION_UNKNOWN ) + connector->display_info.panel_orientation = orientation_quirk; + +return drm_connector_init_panel_orientation_property (connector); +} +EXPORT_SYMBOL (drm_connector_init_panel_orientation_property_quirk); +int drm_connector_set_obj_prop (struct drm_mode_object *obj,struct drm_property *property,uint64_t value)
drivers/gpu/drm/i915/display/intel_dp.c +2 -2
@@ -7063,8 +7063,8 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp,intel_panel_setup_backlight (connector, pipe);if (fixed_mode) -drm_connector_init_panel_orientation_property ( - connector, fixed_mode->hdisplay, fixed_mode->vdisplay); +drm_connector_init_panel_orientation_property_quirk (connector, + fixed_mode->hdisplay, fixed_mode->vdisplay);return true;
drivers/gpu/drm/i915/display/vlv_dsi.c +1 -1
@@ -1662,7 +1662,7 @@ static void intel_dsi_add_properties(struct intel_connector *connector) connector->base.display_info.panel_orientation =vlv_dsi_get_panel_orientation (connector); -drm_connector_init_panel_orientation_property ( +drm_connector_init_panel_orientation_property_quirk ( &connector->base, connector->panel.fixed_mode->hdisplay, connector->panel.fixed_mode->vdisplay);
include/drm/drm_connector.h +2 -0
@@ -1512,6 +1512,8 @@ void drm_connector_set_link_status_property(struct drm_connector *connector,void drm_connector_set_vrr_capable_property (struct drm_connector *connector,bool capable);int drm_connector_init_panel_orientation_property ( +struct drm_connector *connector); +int drm_connector_init_panel_orientation_property_quirk (struct drm_connector *connector,int width,int height);int drm_connector_attach_max_bpc_property (struct drm_connector *connector,int min,int max);
Signature · 6 lines
2.22.0.410.gd8fdbe21b5-goog _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v7 4/4 drm/mtk: add panel orientation property
In reply to Derek BasehoreThis inits the panel orientation property for the mediatek dsi driver if the panel orientation (connector.display_info.panel_orientation) is not DRM_MODE_PANEL_ORIENTATION_UNKNOWN.
--- drivers/gpu/drm/mediatek/mtk_dsi.c | 8 ++++++++ 1 file changed, 8 insertions(+)
drivers/gpu/drm/mediatek/mtk_dsi.c +8 -0
@@ -790,10 +790,18 @@ static int mtk_dsi_create_connector(struct drm_device *drm, struct mtk_dsi *dsi)DRM_ERROR ("Failed to attach panel to drm\n" ); goto err_connector_cleanup; } + + ret =drm_connector_init_panel_orientation_property (&dsi->conn); +if (ret) { +DRM_ERROR ("Failed to init panel orientation\n" ); + goto err_panel_detach; + } }return 0 ; +err_panel_detach: +drm_panel_detach (dsi->panel); err_connector_cleanup:drm_connector_cleanup (&dsi->conn);return ret;
Signature · 6 lines
2.22.0.410.gd8fdbe21b5-goog _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH v7 4/4] drm/mtk: add panel orientation property
Hi, Derek:
Quoted 4 lines · Derek Basehore
This inits the panel orientation property for the mediatek dsi driver if the panel orientation (connector.display_info.panel_orientation) is not
DRM_MODE_PANEL_ORIENTATION_UNKNOWN.
Quoted 18 lines
Signed-off-by Derek Basehore <[email protected]>--- drivers/gpu/drm/mediatek/mtk_dsi.c | 8 ++++++++ 1 file changed, 8 insertions(+)drivers/gpu/drm/mediatek/mtk_dsi.c +5
-0@@ -790,10 +790,18 @@ static int mtk_dsi_create_connector(struct drm_device *drm, struct mtk_dsi *dsi)DRM_ERROR ("Failed to attach panel to drm\n" ); goto err_connector_cleanup; } + + ret =drm_connector_init_panel_orientation_property (&dsi->conn); +if (ret) { +DRM_ERROR ("Failed to init panel orientation\n" ); + goto err_panel_detach;
drivers/gpu/drm/mediatek/mtk_dsi.c static int mtk_dsi_create_connector(struct drm_device *drm, struct mtk_dsi *dsi) · line 807
Quoted 10 lines
drivers/gpu/drm/mediatek/mtk_dsi.c +3
-0+ } }return 0 ; +err_panel_detach: +drm_panel_detach (dsi->panel); err_connector_cleanup:drm_connector_cleanup (&dsi->conn);return ret;
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Patchwork
CI✗ Fi.CI.BAT: failure for Panel rotation patches (rev7)
In reply to Derek Basehore== Series Details ==
== Series Details ==
Series: Panel rotation patches (rev7)
URL : https://patchwork.freedesktop.org/series/61870/
State : failure
== Summary ==
CALL scripts/checksyscalls.sh
CALL scripts/atomic/check-atomics.sh
DESCEND objtool
CHK include/generated/compile.h AR drivers/gpu/drm/i915/built-in.a CC [M] drivers/gpu/drm/i915/header_test_i915_active_types.o CC [M] drivers/gpu/drm/i915/header_test_i915_debugfs.o CC [M] drivers/gpu/drm/i915/header_test_i915_drv.o CC [M] drivers/gpu/drm/i915/header_test_i915_fixed.o CC [M] drivers/gpu/drm/i915/header_test_i915_gem_gtt.o CC [M] drivers/gpu/drm/i915/header_test_i915_globals.o CC [M] drivers/gpu/drm/i915/header_test_i915_irq.o CC [M] drivers/gpu/drm/i915/header_test_i915_params.o CC [M] drivers/gpu/drm/i915/header_test_i915_priolist_types.o CC [M] drivers/gpu/drm/i915/header_test_i915_pvinfo.o CC [M] drivers/gpu/drm/i915/header_test_i915_reg.o CC [M] drivers/gpu/drm/i915/header_test_i915_scheduler_types.o CC [M] drivers/gpu/drm/i915/header_test_i915_utils.o CC [M] drivers/gpu/drm/i915/header_test_i915_vgpu.o CC [M] drivers/gpu/drm/i915/header_test_intel_csr.o CC [M] drivers/gpu/drm/i915/header_test_intel_drv.o CC [M] drivers/gpu/drm/i915/header_test_intel_guc_ct.o CC [M] drivers/gpu/drm/i915/header_test_intel_guc_fwif.o CC [M] drivers/gpu/drm/i915/header_test_intel_guc_reg.o CC [M] drivers/gpu/drm/i915/header_test_intel_gvt.o CC [M] drivers/gpu/drm/i915/header_test_intel_pm.o CC [M] drivers/gpu/drm/i915/header_test_intel_runtime_pm.o CC [M] drivers/gpu/drm/i915/header_test_intel_sideband.o CC [M] drivers/gpu/drm/i915/header_test_intel_uc_fw.o CC [M] drivers/gpu/drm/i915/header_test_intel_uncore.o CC [M] drivers/gpu/drm/i915/header_test_intel_wakeref.o CC [M] drivers/gpu/drm/i915/display/icl_dsi.o
drivers/gpu/drm/i915/display/icl_dsi.c: In function ‘icl_dsi_add_properties’:drivers/gpu/drm/i915/display/icl_dsi.c:1526:2: error: too many arguments to function ‘drm_connector_init_panel_orientation_property’
drm_connector_init_panel_orientation_property(&connector->base, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from ./include/drm/drm_modes.h:33:0,
from ./include/drm/drm_crtc.h:40,
from ./include/drm/drm_atomic_helper.h:31,
from drivers/gpu/drm/i915/display/icl_dsi.c:28:
./include/drm/drm_connector.h:1517:5: note: declared here
int drm_connector_init_panel_orientation_property(
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~scripts/Makefile.build:278: recipe for target 'drivers/gpu/drm/i915/display/icl_dsi.o' failed make[4]: *** [drivers/gpu/drm/i915/display/icl_dsi.o] Error 1 scripts/Makefile.build:489: recipe for target 'drivers/gpu/drm/i915' failed make[3]: *** [drivers/gpu/drm/i915] Error 2scripts/Makefile.build:489: recipe for target 'drivers/gpu/drm' failed make[2]: *** [drivers/gpu/drm] Error 2scripts/Makefile.build:489: recipe for target 'drivers/gpu' failed
make[1]: *** [drivers/gpu] Error 2
Makefile:1071: recipe for target 'drivers' failed
make: *** [drivers] Error 2
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Hi Derek.
Quoted 23 lines · Derek Basehore
This adds the plumbing for reading panel rotation from the devicetree and sets up adding a panel property for the panel orientation on Mediatek SoCs when a rotation is present.
v7 changes:
-forgot to add static inlinev6 changes:
-added enum declaration todrm_panel.hheaderv5 changes:
-rebasedv4 changes:
(quoted diff) +0
-2-fixed some changes made to the i915 driver -clarified comments on of orientation helperv3 changes:
(quoted diff) +0
-3-changed from attach/detach callbacks to directly setting fixed panel values in drm_panel_attach -removed update to Documentation -added separate function for quirked panel orientation property init
Quoted 8 lines
v2 changes:
fixed build errors in i915Derek Basehore (4):
drm/panel: Add helper for reading DT rotation drm/panel: set display info in panel attach drm/connector: Split out orientation quirk detection drm/mtk: add panel orientation property
First two patches are:
Last two patches are:
Sam