Skip to contentSkip to conversation

Add CPU clock support for Armada 7K/8K

PATCH Applied Gregory CLEMENT 3 participants 13 messages Jul 10, 2019 – Aug 27, 2019

Subsystems (4)
lore
Share & tools
lore

Gregory CLEMENT

author maintainer
#0 lore raw

v7 cover Add CPU clock support for Armada 7K/8K

Hello,

This is the seventh version of a series allowing to manage the cpu clock for Armada 7K/8K.

For these SoCs, the CPUs share the same clock by cluster, so actually the clock management is done at cluster level.

As for the other Armada 7K/8K clocks it is possible to have multiple AP so here again we need to have unique name: the purpose of the second patch is to share a common code which will be used in 3 drivers.

The last 2 patch enable the driver at dt and platform level and will be applied through the mvebu subsystem.

Changelog v6->v7:

- Update binding documentation for the AP clock to mention that they expose reference clocks for the cluster to make distinction with the cluster clocks themselves exposed by the cpu clock.

- Add precision on the number of parent clock in the binding documentation.

- Also fix the example by using the reg address in the node name.

Changelog v5->v6:

- Restraint the reg property for the child node to not overlap the other node.
- Give a specific compatible to ap_syscon1.

Changelog v4->v5:

- As requested by the device tree maintainer make the reg property mandatory

- Updated the device tree files accordingly with the new binding

Changelog v3->v4:
- Rebased on v5.1-rc1
- Mention in the binding that a reg property can be used to make the device tree maintainer happy in the hope that there will be finally a review on this patch blocking the whole series.

Changelog v2->v3:
- Add back the first patch documenting the binding

Changelog v1->v2:
- Header cleanup
- Use unsigned int instead of it for cluster member of the ap_cpu_clk struct
- Use clk_hw instead of clk
- Use regmap_read_poll_timeout
- Use for_each_of_cpu_node
- Remove unnecessary WARN_ON()
- Remove headers from armada_ap_cp_helper.h
- Few other minor cleanup

Gregory CLEMENT (6):
dt-bindings: ap806: add the cluster clock node in the syscon file
clk: mvebu: add helper file for Armada AP and CP clocks
clk: mvebu: add CPU clock driver for Armada 7K/8K
clk: mvebu: ap806: Fix clock name for the cluster
arm64: marvell: enable the Armada 7K/8K CPU clk driver
arm64: dts: marvell: Add cpu clock node on Armada 7K/8K

 .../arm/marvell/ap806-system-controller.txt   |  31 ++-
 arch/arm64/Kconfig.platforms                  |   1 +
 .../boot/dts/marvell/armada-ap806-quad.dtsi   |   4 +
 arch/arm64/boot/dts/marvell/armada-ap806.dtsi |   7 +
 drivers/clk/mvebu/Kconfig                     |   8 +
 drivers/clk/mvebu/Makefile                    |   2 +
 drivers/clk/mvebu/ap-cpu-clk.c                | 259 ++++++++++++++++++
 drivers/clk/mvebu/ap806-system-controller.c   |  24 +-
 drivers/clk/mvebu/armada_ap_cp_helper.c       |  30 ++
 drivers/clk/mvebu/armada_ap_cp_helper.h       |  11 +
 drivers/clk/mvebu/cp110-system-controller.c   |  32 +--
 11 files changed, 365 insertions(+), 44 deletions(-)
 create mode 100644 drivers/clk/mvebu/ap-cpu-clk.c
 create mode 100644 drivers/clk/mvebu/armada_ap_cp_helper.c
 create mode 100644 drivers/clk/mvebu/armada_ap_cp_helper.h
Signature · 1 line
2.20.1
author maintainer
#1 lore raw

PATCH v7 1/6 dt-bindings: ap806: add the cluster clock node in the syscon file

Document the device tree binding for the cluster clock controllers found in the Armada 7K/8K SoCs.

---
 .../arm/marvell/ap806-system-controller.txt   | 31 +++++++++++++++++--
 1 file changed, 29 insertions(+), 2 deletions(-)
Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt +29 -2
index 7b8b8eb0191f..4f21c1024073 100644
@@ -21,8 +21,8 @@ Clocks:
 The Device Tree node representing the AP806 system controller provides
 a number of clocks:
 
- - 0: clock of CPU cluster 0
- - 1: clock of CPU cluster 1
+ - 0: reference clock of CPU cluster 0
+ - 1: reference clock of CPU cluster 1
  - 2: fixed PLL at 1200 Mhz
  - 3: MSS clock, derived from the fixed PLL
 
@@ -143,3 +143,30 @@ ap_syscon1: system-controller@6f8000 {
 		#thermal-sensor-cells = <1>;
 	};
 };
+
+Cluster clocks:
+---------------
+
+Device Tree Clock bindings for cluster clock of AP806 Marvell. Each
+cluster contain up to 2 CPUs running at the same frequency.
+
+Required properties:
+- compatible: must be  "marvell,ap806-cpu-clock";
+- #clock-cells : should be set to 1.
+
+- clocks : shall be the input parent clock(s) phandle for the clock
+           (one per cluster)
+
+- reg: register range associated with the cluster clocks
+
+ap_syscon1: system-controller@6f8000 {
+	compatible = "marvell,armada-ap806-syscon1", "syscon", "simple-mfd";
+	reg = <0x6f8000 0x1000>;
+
+	cpu_clk: clock-cpu@278 {
+		compatible = "marvell,ap806-cpu-clock";
+		clocks = <&ap_clk 0>, <&ap_clk 1>;
+		#clock-cells = <1>;
+		reg = <0x278 0xa30>;
+	};
+};
Signature · 1 line
2.20.1
maintainer Reviewed-by on v7 1/6
#2 lore raw

Re: [PATCH v7 1/6] dt-bindings: ap806: add the cluster clock node in the syscon file

Quoted 8 lines · Gregory CLEMENT

Document the device tree binding for the cluster clock controllers found in the Armada 7K/8K SoCs.

---
 .../arm/marvell/ap806-system-controller.txt   | 31 +++++++++++++++++--
 1 file changed, 29 insertions(+), 2 deletions(-)
author maintainer
#4 lore raw

PATCH v7 2/6 clk: mvebu: add helper file for Armada AP and CP clocks

In reply to Gregory CLEMENT

Clock drivers for Armada AP and Armada CP use the same function to generate unique clock name. A third drivers is coming with the same need, so it's time to move this function in a common file.

---
 drivers/clk/mvebu/Kconfig                   |  5 ++++
 drivers/clk/mvebu/Makefile                  |  1 +
 drivers/clk/mvebu/ap806-system-controller.c | 24 ++++------------
 drivers/clk/mvebu/armada_ap_cp_helper.c     | 30 +++++++++++++++++++
 drivers/clk/mvebu/armada_ap_cp_helper.h     | 11 +++++++
 drivers/clk/mvebu/cp110-system-controller.c | 32 ++++++---------------
 6 files changed, 61 insertions(+), 42 deletions(-)
 create mode 100644 drivers/clk/mvebu/armada_ap_cp_helper.c
 create mode 100644 drivers/clk/mvebu/armada_ap_cp_helper.h
drivers/clk/mvebu/Kconfig +5 -0
index fddc8ac5faff..5492fae3f0ab 100644
@@ -7,6 +7,9 @@ config MVEBU_CLK_CPU
 config MVEBU_CLK_COREDIV
 	bool
 
+config ARMADA_AP_CP_HELPER
+	bool
+
 config ARMADA_370_CLK
 	bool
 	select MVEBU_CLK_COMMON
@@ -34,9 +37,11 @@ config ARMADA_XP_CLK
 
 config ARMADA_AP806_SYSCON
 	bool
+	select ARMADA_AP_CP_HELPER
 
 config ARMADA_CP110_SYSCON
 	bool
+	select ARMADA_AP_CP_HELPER
 
 config DOVE_CLK
 	bool
drivers/clk/mvebu/Makefile +1 -0
index 93ac3685271f..6638ad962ec1 100644
@@ -2,6 +2,7 @@
 obj-$(CONFIG_MVEBU_CLK_COMMON)	+= common.o
 obj-$(CONFIG_MVEBU_CLK_CPU) 	+= clk-cpu.o
 obj-$(CONFIG_MVEBU_CLK_COREDIV)	+= clk-corediv.o
+obj-$(CONFIG_ARMADA_AP_CP_HELPER) += armada_ap_cp_helper.o
 
 obj-$(CONFIG_ARMADA_370_CLK)	+= armada-370.o
 obj-$(CONFIG_ARMADA_375_CLK)	+= armada-375.o
drivers/clk/mvebu/ap806-system-controller.c +6 -18
index ea54a874bbda..0a58824ff053 100644
@@ -10,11 +10,11 @@
 
 #define pr_fmt(fmt) "ap806-system-controller: " fmt
 
+#include "armada_ap_cp_helper.h"
 #include <linux/clk-provider.h>
 #include <linux/mfd/syscon.h>
 #include <linux/init.h>
 #include <linux/of.h>
-#include <linux/of_address.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 
@@ -30,18 +30,6 @@ static struct clk_onecell_data ap806_clk_data = {
 	.clk_num = AP806_CLK_NUM,
 };
 
-static char *ap806_unique_name(struct device *dev, struct device_node *np,
-			       char *name)
-{
-	const __be32 *reg;
-	u64 addr;
-
-	reg = of_get_property(np, "reg", NULL);
-	addr = of_translate_address(np, reg);
-	return devm_kasprintf(dev, GFP_KERNEL, "%llx-%s",
-			(unsigned long long)addr, name);
-}
-
 static int ap806_syscon_common_probe(struct platform_device *pdev,
 				     struct device_node *syscon_node)
 {
@@ -109,7 +97,7 @@ static int ap806_syscon_common_probe(struct platform_device *pdev,
 	cpuclk_freq *= 1000 * 1000;
 
 	/* CPU clocks depend on the Sample At Reset configuration */
-	name = ap806_unique_name(dev, syscon_node, "cpu-cluster-0");
+	name = ap_cp_unique_name(dev, syscon_node, "cpu-cluster-0");
 	ap806_clks[0] = clk_register_fixed_rate(dev, name, NULL,
 						0, cpuclk_freq);
 	if (IS_ERR(ap806_clks[0])) {
@@ -117,7 +105,7 @@ static int ap806_syscon_common_probe(struct platform_device *pdev,
 		goto fail0;
 	}
 
-	name = ap806_unique_name(dev, syscon_node, "cpu-cluster-1");
+	name = ap_cp_unique_name(dev, syscon_node, "cpu-cluster-1");
 	ap806_clks[1] = clk_register_fixed_rate(dev, name, NULL, 0,
 						cpuclk_freq);
 	if (IS_ERR(ap806_clks[1])) {
@@ -126,7 +114,7 @@ static int ap806_syscon_common_probe(struct platform_device *pdev,
 	}
 
 	/* Fixed clock is always 1200 Mhz */
-	fixedclk_name = ap806_unique_name(dev, syscon_node, "fixed");
+	fixedclk_name = ap_cp_unique_name(dev, syscon_node, "fixed");
 	ap806_clks[2] = clk_register_fixed_rate(dev, fixedclk_name, NULL,
 						0, 1200 * 1000 * 1000);
 	if (IS_ERR(ap806_clks[2])) {
@@ -135,7 +123,7 @@ static int ap806_syscon_common_probe(struct platform_device *pdev,
 	}
 
 	/* MSS Clock is fixed clock divided by 6 */
-	name = ap806_unique_name(dev, syscon_node, "mss");
+	name = ap_cp_unique_name(dev, syscon_node, "mss");
 	ap806_clks[3] = clk_register_fixed_factor(NULL, name, fixedclk_name,
 						  0, 1, 6);
 	if (IS_ERR(ap806_clks[3])) {
@@ -144,7 +132,7 @@ static int ap806_syscon_common_probe(struct platform_device *pdev,
 	}
 
 	/* SDIO(/eMMC) Clock is fixed clock divided by 3 */
-	name = ap806_unique_name(dev, syscon_node, "sdio");
+	name = ap_cp_unique_name(dev, syscon_node, "sdio");
 	ap806_clks[4] = clk_register_fixed_factor(NULL, name,
 						  fixedclk_name,
 						  0, 1, 3);
drivers/clk/mvebu/armada_ap_cp_helper.c new file +30 -0
new file mode 100644
index 000000000000..6a930f697ee5
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Marvell Armada AP and CP110 helper
+ *
+ * Copyright (C) 2018 Marvell
+ *
+ * Gregory Clement <[email protected]>
+ *
+ */
+
+#include "armada_ap_cp_helper.h"
+#include <linux/device.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+char *ap_cp_unique_name(struct device *dev, struct device_node *np,
+			const char *name)
+{
+	const __be32 *reg;
+	u64 addr;
+
+	/* Do not create a name if there is no clock */
+	if (!name)
+		return NULL;
+
+	reg = of_get_property(np, "reg", NULL);
+	addr = of_translate_address(np, reg);
+	return devm_kasprintf(dev, GFP_KERNEL, "%llx-%s",
+			      (unsigned long long)addr, name);
+}
drivers/clk/mvebu/armada_ap_cp_helper.h new file +11 -0
new file mode 100644
index 000000000000..810af1e5dfa4
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+
+#ifndef __ARMADA_AP_CP_HELPER_H
+#define __ARMADA_AP_CP_HELPER_H
+
+struct device;
+struct device_node;
+
+char *ap_cp_unique_name(struct device *dev, struct device_node *np,
+			const char *name);
+#endif
drivers/clk/mvebu/cp110-system-controller.c +8 -24
index b6de283f45e3..808463276145 100644
@@ -26,11 +26,11 @@
 
 #define pr_fmt(fmt) "cp110-system-controller: " fmt
 
+#include "armada_ap_cp_helper.h"
 #include <linux/clk-provider.h>
 #include <linux/mfd/syscon.h>
 #include <linux/init.h>
 #include <linux/of.h>
-#include <linux/of_address.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/slab.h>
@@ -212,22 +212,6 @@ static struct clk_hw *cp110_of_clk_get(struct of_phandle_args *clkspec,
 	return ERR_PTR(-EINVAL);
 }
 
-static char *cp110_unique_name(struct device *dev, struct device_node *np,
-			       const char *name)
-{
-	const __be32 *reg;
-	u64 addr;
-
-	/* Do not create a name if there is no clock */
-	if (!name)
-		return NULL;
-
-	reg = of_get_property(np, "reg", NULL);
-	addr = of_translate_address(np, reg);
-	return devm_kasprintf(dev, GFP_KERNEL, "%llx-%s",
-			      (unsigned long long)addr, name);
-}
-
 static int cp110_syscon_common_probe(struct platform_device *pdev,
 				     struct device_node *syscon_node)
 {
@@ -261,7 +245,7 @@ static int cp110_syscon_common_probe(struct platform_device *pdev,
 	cp110_clk_data->num = CP110_CLK_NUM;
 
 	/* Register the PLL0 which is the root of the hw tree */
-	pll0_name = cp110_unique_name(dev, syscon_node, "pll0");
+	pll0_name = ap_cp_unique_name(dev, syscon_node, "pll0");
 	hw = clk_hw_register_fixed_rate(NULL, pll0_name, NULL, 0,
 					1000 * 1000 * 1000);
 	if (IS_ERR(hw)) {
@@ -272,7 +256,7 @@ static int cp110_syscon_common_probe(struct platform_device *pdev,
 	cp110_clks[CP110_CORE_PLL0] = hw;
 
 	/* PPv2 is PLL0/3 */
-	ppv2_name = cp110_unique_name(dev, syscon_node, "ppv2-core");
+	ppv2_name = ap_cp_unique_name(dev, syscon_node, "ppv2-core");
 	hw = clk_hw_register_fixed_factor(NULL, ppv2_name, pll0_name, 0, 1, 3);
 	if (IS_ERR(hw)) {
 		ret = PTR_ERR(hw);
@@ -282,7 +266,7 @@ static int cp110_syscon_common_probe(struct platform_device *pdev,
 	cp110_clks[CP110_CORE_PPV2] = hw;
 
 	/* X2CORE clock is PLL0/2 */
-	x2core_name = cp110_unique_name(dev, syscon_node, "x2core");
+	x2core_name = ap_cp_unique_name(dev, syscon_node, "x2core");
 	hw = clk_hw_register_fixed_factor(NULL, x2core_name, pll0_name,
 					  0, 1, 2);
 	if (IS_ERR(hw)) {
@@ -293,7 +277,7 @@ static int cp110_syscon_common_probe(struct platform_device *pdev,
 	cp110_clks[CP110_CORE_X2CORE] = hw;
 
 	/* Core clock is X2CORE/2 */
-	core_name = cp110_unique_name(dev, syscon_node, "core");
+	core_name = ap_cp_unique_name(dev, syscon_node, "core");
 	hw = clk_hw_register_fixed_factor(NULL, core_name, x2core_name,
 					  0, 1, 2);
 	if (IS_ERR(hw)) {
@@ -303,7 +287,7 @@ static int cp110_syscon_common_probe(struct platform_device *pdev,
 
 	cp110_clks[CP110_CORE_CORE] = hw;
 	/* NAND can be either PLL0/2.5 or core clock */
-	nand_name = cp110_unique_name(dev, syscon_node, "nand-core");
+	nand_name = ap_cp_unique_name(dev, syscon_node, "nand-core");
 	if (nand_clk_ctrl & NF_CLOCK_SEL_400_MASK)
 		hw = clk_hw_register_fixed_factor(NULL, nand_name,
 						   pll0_name, 0, 2, 5);
@@ -318,7 +302,7 @@ static int cp110_syscon_common_probe(struct platform_device *pdev,
 	cp110_clks[CP110_CORE_NAND] = hw;
 
 	/* SDIO clock is PLL0/2.5 */
-	sdio_name = cp110_unique_name(dev, syscon_node, "sdio-core");
+	sdio_name = ap_cp_unique_name(dev, syscon_node, "sdio-core");
 	hw = clk_hw_register_fixed_factor(NULL, sdio_name,
 					  pll0_name, 0, 2, 5);
 	if (IS_ERR(hw)) {
@@ -330,7 +314,7 @@ static int cp110_syscon_common_probe(struct platform_device *pdev,
 
 	/* create the unique name for all the gate clocks */
 	for (i = 0; i < ARRAY_SIZE(gate_base_names); i++)
-		gate_name[i] =	cp110_unique_name(dev, syscon_node,
+		gate_name[i] =	ap_cp_unique_name(dev, syscon_node,
 						  gate_base_names[i]);
 
 	for (i = 0; i < ARRAY_SIZE(gate_base_names); i++) {
Signature · 1 line
2.20.1
maintainer Applied
#5 lore raw

Re: [PATCH v7 2/6] clk: mvebu: add helper file for Armada AP and CP clocks

Quoting Gregory CLEMENT (2019-07-10 06:43:42)

Quoted 6 lines

Clock drivers for Armada AP and Armada CP use the same function to generate unique clock name. A third drivers is coming with the same need, so it's time to move this function in a common file.

---

Applied to clk-next

author maintainer
#6 lore raw

PATCH v7 3/6 clk: mvebu: add CPU clock driver for Armada 7K/8K

In reply to Gregory CLEMENT

The CPU frequency is managed at the AP level for the Armada 7K/8K. The CPU frequency is modified by cluster: the CPUs of the same cluster have the same frequency.

This patch adds the clock driver that will be used by CPUFreq, it is based on the work of Omri Itach <[email protected]>.

---
 drivers/clk/mvebu/Kconfig      |   3 +
 drivers/clk/mvebu/Makefile     |   1 +
 drivers/clk/mvebu/ap-cpu-clk.c | 259 +++++++++++++++++++++++++++++++++
 3 files changed, 263 insertions(+)
 create mode 100644 drivers/clk/mvebu/ap-cpu-clk.c
drivers/clk/mvebu/Kconfig +3 -0
index 5492fae3f0ab..9d0b2f7cee21 100644
@@ -39,6 +39,9 @@ config ARMADA_AP806_SYSCON
 	bool
 	select ARMADA_AP_CP_HELPER
 
+config ARMADA_AP_CPU_CLK
+	bool
+
 config ARMADA_CP110_SYSCON
 	bool
 	select ARMADA_AP_CP_HELPER
drivers/clk/mvebu/Makefile +1 -0
index 6638ad962ec1..04464cef0f06 100644
@@ -13,6 +13,7 @@ obj-$(CONFIG_ARMADA_37XX_CLK)	+= armada-37xx-tbg.o
 obj-$(CONFIG_ARMADA_37XX_CLK)	+= armada-37xx-periph.o
 obj-$(CONFIG_ARMADA_XP_CLK)	+= armada-xp.o mv98dx3236.o
 obj-$(CONFIG_ARMADA_AP806_SYSCON) += ap806-system-controller.o
+obj-$(CONFIG_ARMADA_AP_CPU_CLK) += ap-cpu-clk.o
 obj-$(CONFIG_ARMADA_CP110_SYSCON) += cp110-system-controller.o
 obj-$(CONFIG_DOVE_CLK)		+= dove.o dove-divider.o
 obj-$(CONFIG_KIRKWOOD_CLK)	+= kirkwood.o
drivers/clk/mvebu/ap-cpu-clk.c new file +259 -0

259 lines not on this page · raw message

Signature · 1 line
2.20.1
maintainer Applied
#7 lore raw

Re: [PATCH v7 3/6] clk: mvebu: add CPU clock driver for Armada 7K/8K

Quoting Gregory CLEMENT (2019-07-10 06:43:43)

Quoted 9 lines

The CPU frequency is managed at the AP level for the Armada 7K/8K. The CPU frequency is modified by cluster: the CPUs of the same cluster have the same frequency.

This patch adds the clock driver that will be used by CPUFreq, it is based on the work of Omri Itach <[email protected]>.

---

Applied to clk-next

author maintainer
#8 lore raw

PATCH v7 4/6 clk: mvebu: ap806: Fix clock name for the cluster

In reply to Gregory CLEMENT

Actually, the clocks exposed for the cluster are not the CPU clocks, but the PLL clock used as entry clock for the CPU clocks. The CPU clock will be managed by a driver submitting in the following patches.

---
 drivers/clk/mvebu/ap806-system-controller.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/clk/mvebu/ap806-system-controller.c +2 -2
index 0a58824ff053..73ba8fd7860f 100644
@@ -97,7 +97,7 @@ static int ap806_syscon_common_probe(struct platform_device *pdev,
 	cpuclk_freq *= 1000 * 1000;
 
 	/* CPU clocks depend on the Sample At Reset configuration */
-	name = ap_cp_unique_name(dev, syscon_node, "cpu-cluster-0");
+	name = ap_cp_unique_name(dev, syscon_node, "pll-cluster-0");
 	ap806_clks[0] = clk_register_fixed_rate(dev, name, NULL,
 						0, cpuclk_freq);
 	if (IS_ERR(ap806_clks[0])) {
@@ -105,7 +105,7 @@ static int ap806_syscon_common_probe(struct platform_device *pdev,
 		goto fail0;
 	}
 
-	name = ap_cp_unique_name(dev, syscon_node, "cpu-cluster-1");
+	name = ap_cp_unique_name(dev, syscon_node, "pll-cluster-1");
 	ap806_clks[1] = clk_register_fixed_rate(dev, name, NULL, 0,
 						cpuclk_freq);
 	if (IS_ERR(ap806_clks[1])) {
Signature · 1 line
2.20.1
maintainer Applied
#9 lore raw

Re: [PATCH v7 4/6] clk: mvebu: ap806: Fix clock name for the cluster

Quoting Gregory CLEMENT (2019-07-10 06:43:44)

Quoted 6 lines

Actually, the clocks exposed for the cluster are not the CPU clocks, but the PLL clock used as entry clock for the CPU clocks. The CPU clock will be managed by a driver submitting in the following patches.

---

Applied to clk-next

author maintainer
#10 lore raw

PATCH v7 5/6 arm64: marvell: enable the Armada 7K/8K CPU clk driver

In reply to Gregory CLEMENT

This commit makes sure the driver for the Armada 7K/8K CPU clock is enabled.

---
 arch/arm64/Kconfig.platforms | 1 +
 1 file changed, 1 insertion(+)
arch/arm64/Kconfig.platforms +1 -0
index 42eca656faa8..3cf5769fd17d 100644
@@ -138,6 +138,7 @@ config ARCH_MESON
 
 config ARCH_MVEBU
 	bool "Marvell EBU SoC Family"
+	select ARMADA_AP_CPU_CLK
 	select ARMADA_AP806_SYSCON
 	select ARMADA_CP110_SYSCON
 	select ARMADA_37XX_CLK
Signature · 1 line
2.20.1
author maintainer
#11 lore raw

PATCH v7 6/6 arm64: dts: marvell: Add cpu clock node on Armada 7K/8K

In reply to Gregory CLEMENT

Add cpu clock node on AP

---
 arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi | 4 ++++
 arch/arm64/boot/dts/marvell/armada-ap806.dtsi      | 7 +++++++
 2 files changed, 11 insertions(+)
arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi +4 -0
index 2baafe12ebd4..472211159979 100644
@@ -20,24 +20,28 @@
 			compatible = "arm,cortex-a72";
 			reg = <0x000>;
 			enable-method = "psci";
+			clocks = <&cpu_clk 0>;
 		};
 		cpu1: cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a72";
 			reg = <0x001>;
 			enable-method = "psci";
+			clocks = <&cpu_clk 0>;
 		};
 		cpu2: cpu@100 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a72";
 			reg = <0x100>;
 			enable-method = "psci";
+			clocks = <&cpu_clk 1>;
 		};
 		cpu3: cpu@101 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a72";
 			reg = <0x101>;
 			enable-method = "psci";
+			clocks = <&cpu_clk 1>;
 		};
 	};
 };
arch/arm64/boot/dts/marvell/armada-ap806.dtsi +7 -0
index 91dad7e4ee59..fca6536494b3 100644
@@ -280,6 +280,13 @@
 				#address-cells = <1>;
 				#size-cells = <1>;
 
+				cpu_clk: clock-cpu@278 {
+					compatible = "marvell,ap806-cpu-clock";
+					clocks = <&ap_clk 0>, <&ap_clk 1>;
+					#clock-cells = <1>;
+					reg = <0x278 0xa30>;
+				};
+
 				ap_thermal: thermal-sensor@80 {
 					compatible = "marvell,armada-ap806-thermal";
 					reg = <0x80 0x10>;
Signature · 1 line
2.20.1
author maintainer
#12 lore raw

Re: [PATCH v7 6/6] arm64: dts: marvell: Add cpu clock node on Armada 7K/8K

Quoted 5 lines

Add cpu clock node on AP

Applied on mvebu/dt64

Gregory

Quoted 59 lines
---
 arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi | 4 ++++
 arch/arm64/boot/dts/marvell/armada-ap806.dtsi      | 7 +++++++
 2 files changed, 11 insertions(+)
arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi +4 -0
index 2baafe12ebd4..472211159979 100644
@@ -20,24 +20,28 @@
 			compatible = "arm,cortex-a72";
 			reg = <0x000>;
 			enable-method = "psci";
+			clocks = <&cpu_clk 0>;
 		};
 		cpu1: cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a72";
 			reg = <0x001>;
 			enable-method = "psci";
+			clocks = <&cpu_clk 0>;
 		};
 		cpu2: cpu@100 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a72";
 			reg = <0x100>;
 			enable-method = "psci";
+			clocks = <&cpu_clk 1>;
 		};
 		cpu3: cpu@101 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a72";
 			reg = <0x101>;
 			enable-method = "psci";
+			clocks = <&cpu_clk 1>;
 		};
 	};
 };
arch/arm64/boot/dts/marvell/armada-ap806.dtsi +7 -0
index 91dad7e4ee59..fca6536494b3 100644
@@ -280,6 +280,13 @@
 				#address-cells = <1>;
 				#size-cells = <1>;
 
+				cpu_clk: clock-cpu@278 {
+					compatible = "marvell,ap806-cpu-clock";
+					clocks = <&ap_clk 0>, <&ap_clk 1>;
+					#clock-cells = <1>;
+					reg = <0x278 0xa30>;
+				};
+
 				ap_thermal: thermal-sensor@80 {
 					compatible = "marvell,armada-ap806-thermal";
 					reg = <0x80 0x10>;
Signature · 1 line
2.20.1
Signature · 3 lines
Gregory Clement, Bootlin
Embedded Linux and Kernel engineering
http://bootlin.com