Skip to contentSkip to conversation

ARM SMMUv3: Fix spurious notification errors and assert with vfio

PATCH Superseded Eric Auger 3 participants 13 messages Jul 11, 2019 – Aug 22, 2019

v3 of 4 Superseded Latest is v4 →

lore
Share & tools
lore

Eric Auger

author
#0 lore raw

v3 cover ARM SMMUv3: Fix spurious notification errors and assert with vfio

As of today when a guest is assigned with a host PCI device and an SMMUv3, VFIO calls memory_region_iommu_replay() default implementation. This translates the whole address range and completely stalls the execution. As VFIO/SMMUv3 integration is not supported yet (it requires SMMUv3 HW nested paging), let's recognize this situation and simply assert.

Also the series silences some spurious translation configuration decoding errors (STE out of span or invalid STE) that may happen on guest IOVA invalidation notifications.

Best Regards

Eric

Eric Auger (5):
memory: Remove unused memory_region_iommu_replay_all()
memory: Add IOMMU_ATTR_VFIO_NESTED IOMMU memory region attribute hw/vfio/common: Assert in case of nested mode hw/arm/smmuv3: Log a guest error when decoding an invalid STE hw/arm/smmuv3: Remove spurious error messages on IOVA invalidations

 hw/arm/smmuv3-internal.h |  1 +
 hw/arm/smmuv3.c          | 26 ++++++++++++++++++++------
 hw/vfio/common.c         |  8 ++++++++
 include/exec/memory.h    | 13 ++-----------
 memory.c                 |  9 ---------
 5 files changed, 31 insertions(+), 26 deletions(-)
Signature · 1 line
2.20.1
author
#1 lore raw

PATCH v3 1/5 memory: Remove unused memory_region_iommu_replay_all()

memory_region_iommu_replay_all is not used. Remove it.

---
 include/exec/memory.h | 10 ----------
 memory.c              |  9 ---------
 2 files changed, 19 deletions(-)
include/exec/memory.h +0 -10
index 2c5cdffa31..a078cd033f 100644
@@ -1076,16 +1076,6 @@ void memory_region_register_iommu_notifier(MemoryRegion *mr,
  */
 void memory_region_iommu_replay(IOMMUMemoryRegion *iommu_mr, IOMMUNotifier *n);
 
-/**
- * memory_region_iommu_replay_all: replay existing IOMMU translations
- * to all the notifiers registered.
- *
- * Note: this is not related to record-and-replay functionality.
- *
- * @iommu_mr: the memory region to observe
- */
-void memory_region_iommu_replay_all(IOMMUMemoryRegion *iommu_mr);
-
 /**
  * memory_region_unregister_iommu_notifier: unregister a notifier for
  * changes to IOMMU translation entries.
memory.c +0 -9
index 480f3d989b..90967b579d 100644
@@ -1910,15 +1910,6 @@ void memory_region_iommu_replay(IOMMUMemoryRegion *iommu_mr, IOMMUNotifier *n)
     }
 }
 
-void memory_region_iommu_replay_all(IOMMUMemoryRegion *iommu_mr)
-{
-    IOMMUNotifier *notifier;
-
-    IOMMU_NOTIFIER_FOREACH(notifier, iommu_mr) {
-        memory_region_iommu_replay(iommu_mr, notifier);
-    }
-}
-
 void memory_region_unregister_iommu_notifier(MemoryRegion *mr,
                                              IOMMUNotifier *n)
 {
Signature · 1 line
2.20.1
author
#2 lore raw

PATCH v3 2/5 memory: Add IOMMU_ATTR_VFIO_NESTED IOMMU memory region attribute

In reply to Eric Auger

We introduce a new IOMMU Memory Region attribute, IOMMU_ATTR_VFIO_NESTED that tells whether the virtual IOMMU requires HW nested paging for VFIO integration.

Current Intel virtual IOMMU device supports "Caching Mode" and does not require 2 stages at physical level to be integrated with VFIO. However SMMUv3 does not implement such "caching mode" and requires to use HW nested paging.

As such SMMUv3 is the first IOMMU device to advertise this attribute.

---
 hw/arm/smmuv3.c       | 12 ++++++++++++
 include/exec/memory.h |  3 ++-
 2 files changed, 14 insertions(+), 1 deletion(-)
hw/arm/smmuv3.c +12 -0
index e96d5beb9a..384c02cb91 100644
@@ -1490,6 +1490,17 @@ static void smmuv3_notify_flag_changed(IOMMUMemoryRegion *iommu,
     }
 }
 
+static int smmuv3_get_attr(IOMMUMemoryRegion *iommu,
+                           enum IOMMUMemoryRegionAttr attr,
+                           void *data)
+{
+    if (attr == IOMMU_ATTR_VFIO_NESTED) {
+        *(bool *) data = true;
+        return 0;
+    }
+    return -EINVAL;
+}
+
 static void smmuv3_iommu_memory_region_class_init(ObjectClass *klass,
                                                   void *data)
 {
@@ -1497,6 +1508,7 @@ static void smmuv3_iommu_memory_region_class_init(ObjectClass *klass,
 
     imrc->translate = smmuv3_translate;
     imrc->notify_flag_changed = smmuv3_notify_flag_changed;
+    imrc->get_attr = smmuv3_get_attr;
 }
 
 static const TypeInfo smmuv3_type_info = {
include/exec/memory.h +2 -1
index a078cd033f..e477a630a8 100644
@@ -204,7 +204,8 @@ struct MemoryRegionOps {
 };
 
 enum IOMMUMemoryRegionAttr {
-    IOMMU_ATTR_SPAPR_TCE_FD
+    IOMMU_ATTR_SPAPR_TCE_FD,
+    IOMMU_ATTR_VFIO_NESTED,
 };
 
 /**
Signature · 1 line
2.20.1
#3 lore raw

Re: [Qemu-arm] [PATCH-for-4.2 v3 2/5] memory: Add IOMMU_ATTR_VFIO_NESTED IOMMU memory region attribute

Quoted 5 lines · Eric Auger

We introduce a new IOMMU Memory Region attribute, IOMMU_ATTR_VFIO_NESTED that tells whether the virtual IOMMU requires HW nested paging for VFIO integration.

Quoted 7 lines

Current Intel virtual IOMMU device supports "Caching Mode" and does not require 2 stages at physical level to be integrated with VFIO. However SMMUv3 does not implement such "caching mode" and requires to use HW nested paging.

As such SMMUv3 is the first IOMMU device to advertise this attribute.

I'm not sure the name of the attribute really captures the intention here, though I don't have any better suggestions. Maybe IOMMU_ATTR_VFIO_NEEDS_HW_NESTED_PAGING ?

Quoted 11 lines
---
 hw/arm/smmuv3.c       | 12 ++++++++++++
 include/exec/memory.h |  3 ++-
 2 files changed, 14 insertions(+), 1 deletion(-)
hw/arm/smmuv3.c +0 -0
index e96d5beb9a..384c02cb91 100644

hw/arm/smmuv3.c static void smmuv3_notify_flag_changed(IOMMUMemoryRegion *iommu, · line 1498

Quoted 9 lines
hw/arm/smmuv3.c +6 -0
@@ -1490,6 +1490,17 @@ static void smmuv3_notify_flag_changed(IOMMUMemoryRegion *iommu,
     }
 }
 
+static int smmuv3_get_attr(IOMMUMemoryRegion *iommu,
+                           enum IOMMUMemoryRegionAttr attr,
+                           void *data)
+{
+    if (attr == IOMMU_ATTR_VFIO_NESTED) {
+        *(bool *) data = true;

I'm surprised checkpatch doesn't warn about the space after the cast here.

Quoted 21 lines
hw/arm/smmuv3.c +6 -0
+        return 0;
+    }
+    return -EINVAL;
+}
+
 static void smmuv3_iommu_memory_region_class_init(ObjectClass *klass,
                                                   void *data)
 {
@@ -1497,6 +1508,7 @@ static void smmuv3_iommu_memory_region_class_init(ObjectClass *klass,
 
     imrc->translate = smmuv3_translate;
     imrc->notify_flag_changed = smmuv3_notify_flag_changed;
+    imrc->get_attr = smmuv3_get_attr;
 }
 
 static const TypeInfo smmuv3_type_info = {
include/exec/memory.h +0 -0
index a078cd033f..e477a630a8 100644

include/exec/memory.h struct MemoryRegionOps { · line 209

Quoted 7 lines
include/exec/memory.h +2 -1
@@ -204,7 +204,8 @@ struct MemoryRegionOps {
 };
 
 enum IOMMUMemoryRegionAttr {
-    IOMMU_ATTR_SPAPR_TCE_FD
+    IOMMU_ATTR_SPAPR_TCE_FD,
+    IOMMU_ATTR_VFIO_NESTED,
 };

Could we have a comment documenting what the attribute's meaning and semantics are, please? (including what the type is that the data pointer is expected to point to, ie 'bool'.)

(We ought also to document the spapr-specific attribute...)

thanks
-- PMM

#4 lore raw

Re: [Qemu-arm] [PATCH-for-4.2 v3 2/5] memory: Add IOMMU_ATTR_VFIO_NESTED IOMMU memory region attribute

In reply to Eric Auger
Quoted 53 lines · On Thu, 11 Jul 2019 08:18:54 +0200 Eric Auger <[email protected]> wrote:

We introduce a new IOMMU Memory Region attribute, IOMMU_ATTR_VFIO_NESTED that tells whether the virtual IOMMU requires HW nested paging for VFIO integration.

Current Intel virtual IOMMU device supports "Caching Mode" and does not require 2 stages at physical level to be integrated with VFIO. However SMMUv3 does not implement such "caching mode" and requires to use HW nested paging.

As such SMMUv3 is the first IOMMU device to advertise this attribute.

---
 hw/arm/smmuv3.c       | 12 ++++++++++++
 include/exec/memory.h |  3 ++-
 2 files changed, 14 insertions(+), 1 deletion(-)
hw/arm/smmuv3.c +12 -0
index e96d5beb9a..384c02cb91 100644
@@ -1490,6 +1490,17 @@ static void smmuv3_notify_flag_changed(IOMMUMemoryRegion *iommu,
     }
 }
 
+static int smmuv3_get_attr(IOMMUMemoryRegion *iommu,
+                           enum IOMMUMemoryRegionAttr attr,
+                           void *data)
+{
+    if (attr == IOMMU_ATTR_VFIO_NESTED) {
+        *(bool *) data = true;
+        return 0;
+    }
+    return -EINVAL;
+}
+
 static void smmuv3_iommu_memory_region_class_init(ObjectClass *klass,
                                                   void *data)
 {
@@ -1497,6 +1508,7 @@ static void smmuv3_iommu_memory_region_class_init(ObjectClass *klass,
 
     imrc->translate = smmuv3_translate;
     imrc->notify_flag_changed = smmuv3_notify_flag_changed;
+    imrc->get_attr = smmuv3_get_attr;
 }
 
 static const TypeInfo smmuv3_type_info = {
include/exec/memory.h +0 -0
index a078cd033f..e477a630a8 100644

include/exec/memory.h struct MemoryRegionOps { · line 211

Quoted 9 lines
include/exec/memory.h +2 -1
@@ -204,7 +204,8 @@ struct MemoryRegionOps {
 };
 
 enum IOMMUMemoryRegionAttr {
-    IOMMU_ATTR_SPAPR_TCE_FD
+    IOMMU_ATTR_SPAPR_TCE_FD,
+    IOMMU_ATTR_VFIO_NESTED,
 };
 
 /**

Why VFIO_NESTED vs simply NESTED? I figure any time we need to include "VFIO" in the descriptions of something, we're probably not describing the requirement correctly and it just becomes a meaningless tag that gets ignored outside of VFIO related things. If we're trying to describe an IOMMU MemoryRegion that supports dynamic faulting rather than requiring a replay to pre-populate it, then simply define that semantic rather than hand waving some vfio specific interaction. Thanks,

Alex

author
#5 lore raw

Re: [Qemu-devel] [PATCH-for-4.2 v3 2/5] memory: Add IOMMU_ATTR_VFIO_NESTED IOMMU memory region attribute

Hi Alex, Peter,

Quoted 64 lines · Alex Williamson
Quoted 61 lines · On Thu, 11 Jul 2019 08:18:54 +0200 Eric Auger <[email protected]> wrote:

We introduce a new IOMMU Memory Region attribute, IOMMU_ATTR_VFIO_NESTED that tells whether the virtual IOMMU requires HW nested paging for VFIO integration.

Current Intel virtual IOMMU device supports "Caching Mode" and does not require 2 stages at physical level to be integrated with VFIO. However SMMUv3 does not implement such "caching mode" and requires to use HW nested paging.

As such SMMUv3 is the first IOMMU device to advertise this attribute.

---
 hw/arm/smmuv3.c       | 12 ++++++++++++
 include/exec/memory.h |  3 ++-
 2 files changed, 14 insertions(+), 1 deletion(-)
hw/arm/smmuv3.c +12 -0
index e96d5beb9a..384c02cb91 100644
@@ -1490,6 +1490,17 @@ static void smmuv3_notify_flag_changed(IOMMUMemoryRegion *iommu,
     }
 }
 
+static int smmuv3_get_attr(IOMMUMemoryRegion *iommu,
+                           enum IOMMUMemoryRegionAttr attr,
+                           void *data)
+{
+    if (attr == IOMMU_ATTR_VFIO_NESTED) {
+        *(bool *) data = true;
+        return 0;
+    }
+    return -EINVAL;
+}
+
 static void smmuv3_iommu_memory_region_class_init(ObjectClass *klass,
                                                   void *data)
 {
@@ -1497,6 +1508,7 @@ static void smmuv3_iommu_memory_region_class_init(ObjectClass *klass,
 
     imrc->translate = smmuv3_translate;
     imrc->notify_flag_changed = smmuv3_notify_flag_changed;
+    imrc->get_attr = smmuv3_get_attr;
 }
 
 static const TypeInfo smmuv3_type_info = {
include/exec/memory.h +2 -1
index a078cd033f..e477a630a8 100644
@@ -204,7 +204,8 @@ struct MemoryRegionOps {
 };
 
 enum IOMMUMemoryRegionAttr {
-    IOMMU_ATTR_SPAPR_TCE_FD
+    IOMMU_ATTR_SPAPR_TCE_FD,
+    IOMMU_ATTR_VFIO_NESTED,
 };
 
Quoted 10 lines

include/exec/memory.h struct MemoryRegionOps { · line 211

Quoted 1 line
include/exec/memory.h +0 -0
 /**

Why VFIO_NESTED vs simply NESTED? I figure any time we need to include "VFIO" in the descriptions of something, we're probably not describing the requirement correctly and it just becomes a meaningless tag that gets ignored outside of VFIO related things. If we're trying to describe an IOMMU MemoryRegion that supports dynamic faulting rather than requiring a replay to pre-populate it, then simply define that semantic rather than hand waving some vfio specific interaction. Thanks,

I replaced it by IOMMU_ATTR_HW_NESTED_PAGING instead.

Thanks

Eric

Quoted 3 lines

Alex

author
#6 lore raw

PATCH v3 3/5 hw/vfio/common: Assert in case of nested mode

In reply to Eric Auger

As of today, VFIO only works along with vIOMMU supporting caching mode. The SMMUv3 does not support this mode and requires HW nested paging to work properly with VFIO.

So any attempt to run a VFIO device protected by such IOMMU would prevent the assigned device from working and at the moment the guest does not even boot as the default memory_region_iommu_replay() implementation attempts to translate the whole address space and completely stalls the execution.

So let's assert if we recognize nested mode case.

---
 hw/vfio/common.c | 8 ++++++++
 1 file changed, 8 insertions(+)
hw/vfio/common.c +8 -0
index a859298fda..d622191fe6 100644
@@ -604,9 +604,17 @@ static void vfio_listener_region_add(MemoryListener *listener,
     if (memory_region_is_iommu(section->mr)) {
         VFIOGuestIOMMU *giommu;
         IOMMUMemoryRegion *iommu_mr = IOMMU_MEMORY_REGION(section->mr);
+        bool nested;
         int iommu_idx;
 
         trace_vfio_listener_region_add_iommu(iova, end);
+
+        if (!memory_region_iommu_get_attr(iommu_mr, IOMMU_ATTR_VFIO_NESTED,
+                                          (void *)&nested) && nested) {
+            error_report("VFIO/vIOMMU integration based on HW nested paging "
+                         "is not yet supported");
+            abort();
+        }
         /*
          * FIXME: For VFIO iommu types which have KVM acceleration to
          * avoid bouncing all map/unmaps through qemu this way, this
Signature · 1 line
2.20.1
#7 lore raw

Re: [Qemu-arm] [PATCH-for-4.2 v3 3/5] hw/vfio/common: Assert in case of nested mode

Quoted 31 lines · Eric Auger

As of today, VFIO only works along with vIOMMU supporting caching mode. The SMMUv3 does not support this mode and requires HW nested paging to work properly with VFIO.

So any attempt to run a VFIO device protected by such IOMMU would prevent the assigned device from working and at the moment the guest does not even boot as the default memory_region_iommu_replay() implementation attempts to translate the whole address space and completely stalls the execution.

So let's assert if we recognize nested mode case.

---
 hw/vfio/common.c | 8 ++++++++
 1 file changed, 8 insertions(+)
hw/vfio/common.c +1 -0
index a859298fda..d622191fe6 100644
@@ -604,9 +604,17 @@ static void vfio_listener_region_add(MemoryListener *listener,
     if (memory_region_is_iommu(section->mr)) {
         VFIOGuestIOMMU *giommu;
         IOMMUMemoryRegion *iommu_mr = IOMMU_MEMORY_REGION(section->mr);
+        bool nested;
         int iommu_idx;
 
         trace_vfio_listener_region_add_iommu(iova, end);

hw/vfio/common.c static void vfio_listener_region_add(MemoryListener *listener, · line 620

Quoted 10 lines
hw/vfio/common.c +7 -0
+
+        if (!memory_region_iommu_get_attr(iommu_mr, IOMMU_ATTR_VFIO_NESTED,
+                                          (void *)&nested) && nested) {
+            error_report("VFIO/vIOMMU integration based on HW nested paging "
+                         "is not yet supported");
+            abort();
+        }
         /*
          * FIXME: For VFIO iommu types which have KVM acceleration to
          * avoid bouncing all map/unmaps through qemu this way, this

Other failure paths in this function mostly seem to do an error_report() and return (apart from the one call to hw_error() at the bottom of the function). Is an abort() OK here?

thanks
-- PMM

author
#8 lore raw

Re: [Qemu-arm] [Qemu-devel] [PATCH-for-4.2 v3 3/5] hw/vfio/common: Assert in case of nested mode

Hi Peter,

Quoted 31 lines · Peter Maydell
Quoted 30 lines · Eric Auger

As of today, VFIO only works along with vIOMMU supporting caching mode. The SMMUv3 does not support this mode and requires HW nested paging to work properly with VFIO.

So any attempt to run a VFIO device protected by such IOMMU would prevent the assigned device from working and at the moment the guest does not even boot as the default memory_region_iommu_replay() implementation attempts to translate the whole address space and completely stalls the execution.

So let's assert if we recognize nested mode case.

---
 hw/vfio/common.c | 8 ++++++++
 1 file changed, 8 insertions(+)
hw/vfio/common.c +1 -0
index a859298fda..d622191fe6 100644
@@ -604,9 +604,17 @@ static void vfio_listener_region_add(MemoryListener *listener,
     if (memory_region_is_iommu(section->mr)) {
         VFIOGuestIOMMU *giommu;
         IOMMUMemoryRegion *iommu_mr = IOMMU_MEMORY_REGION(section->mr);
+        bool nested;
         int iommu_idx;
 
Quoted 15 lines

hw/vfio/common.c static void vfio_listener_region_add(MemoryListener *listener, · line 620

Quoted 11 lines
hw/vfio/common.c +7 -0
         trace_vfio_listener_region_add_iommu(iova, end);
+
+        if (!memory_region_iommu_get_attr(iommu_mr, IOMMU_ATTR_VFIO_NESTED,
+                                          (void *)&nested) && nested) {
+            error_report("VFIO/vIOMMU integration based on HW nested paging "
+                         "is not yet supported");
+            abort();
+        }
         /*
          * FIXME: For VFIO iommu types which have KVM acceleration to
          * avoid bouncing all map/unmaps through qemu this way, this

Other failure paths in this function mostly seem to do an error_report() and return (apart from the one call to hw_error() at the bottom of the function). Is an abort() OK here?

Yes I should rather jump to the fail label instead.

Thanks!

Eric

Quoted 4 lines

thanks
-- PMM

author
#9 lore raw

PATCH v3 4/5 hw/arm/smmuv3: Log a guest error when decoding an invalid STE

In reply to Eric Auger

Log a guest error when encountering an invalid STE.

---
 hw/arm/smmuv3.c | 1 +
 1 file changed, 1 insertion(+)
hw/arm/smmuv3.c +1 -0
index 384c02cb91..2e270a0f07 100644
@@ -320,6 +320,7 @@ static int decode_ste(SMMUv3State *s, SMMUTransCfg *cfg,
     uint32_t config;
 
     if (!STE_VALID(ste)) {
+        qemu_log_mask(LOG_GUEST_ERROR, "invalid STE\n");
         goto bad_ste;
     }
 
Signature · 1 line
2.20.1
author
#10 lore raw

PATCH v3 5/5 hw/arm/smmuv3: Remove spurious error messages on IOVA invalidations

In reply to Eric Auger

An IOVA/ASID invalidation is notified to all IOMMU Memory Regions through smmuv3_inv_notifiers_iova/smmuv3_notify_iova.

When the notification occurs it is possible that some of the PCIe devices associated to the notified regions do not have a valid stream table entry. In that case we output a LOG_GUEST_ERROR message, for example:

invalid sid=<SID> (L1STD span=0)
"smmuv3_notify_iova error decoding the configuration for iommu mr=<MR>

This is unfortunate as the user gets the impression that there are some translation decoding errors whereas there are not.

This patch adds a new field in SMMUEventInfo that tells whether the detection of an invalid STE must lead to an error report. invalid_ste_allowed is set before doing the invalidations and kept unset on actual translation.

The other configuration decoding error messages are kept since if the STE is valid then the rest of the config must be correct.

---
 hw/arm/smmuv3-internal.h |  1 +
 hw/arm/smmuv3.c          | 15 ++++++++-------
 2 files changed, 9 insertions(+), 7 deletions(-)
hw/arm/smmuv3-internal.h +1 -0
index b160289cd1..d190181ef1 100644
@@ -381,6 +381,7 @@ typedef struct SMMUEventInfo {
     uint32_t sid;
     bool recorded;
     bool record_trans_faults;
+    bool inval_ste_allowed;
     union {
         struct {
             uint32_t ssid;
hw/arm/smmuv3.c +8 -7
index 2e270a0f07..517755aed5 100644
@@ -320,7 +320,9 @@ static int decode_ste(SMMUv3State *s, SMMUTransCfg *cfg,
     uint32_t config;
 
     if (!STE_VALID(ste)) {
-        qemu_log_mask(LOG_GUEST_ERROR, "invalid STE\n");
+        if (!event->inval_ste_allowed) {
+            qemu_log_mask(LOG_GUEST_ERROR, "invalid STE\n");
+        }
         goto bad_ste;
     }
 
@@ -405,7 +407,7 @@ static int smmu_find_ste(SMMUv3State *s, uint32_t sid, STE *ste,
 
         span = L1STD_SPAN(&l1std);
 
-        if (!span) {
+        if (!span && !event->inval_ste_allowed) {
             /* l2ptr is not valid */
             qemu_log_mask(LOG_GUEST_ERROR,
                           "invalid sid=%d (L1STD span=0)\n", sid);
@@ -603,7 +605,9 @@ static IOMMUTLBEntry smmuv3_translate(IOMMUMemoryRegion *mr, hwaddr addr,
     SMMUDevice *sdev = container_of(mr, SMMUDevice, iommu);
     SMMUv3State *s = sdev->smmu;
     uint32_t sid = smmu_get_sid(sdev);
-    SMMUEventInfo event = {.type = SMMU_EVT_NONE, .sid = sid};
+    SMMUEventInfo event = {.type = SMMU_EVT_NONE,
+                           .sid = sid,
+                           .inval_ste_allowed = false};
     SMMUPTWEventInfo ptw_info = {};
     SMMUTranslationStatus status;
     SMMUState *bs = ARM_SMMU(s);
@@ -796,16 +800,13 @@ static void smmuv3_notify_iova(IOMMUMemoryRegion *mr,
                                dma_addr_t iova)
 {
     SMMUDevice *sdev = container_of(mr, SMMUDevice, iommu);
-    SMMUEventInfo event = {};
+    SMMUEventInfo event = {.inval_ste_allowed = true};
     SMMUTransTableInfo *tt;
     SMMUTransCfg *cfg;
     IOMMUTLBEntry entry;
 
     cfg = smmuv3_get_config(sdev, &event);
     if (!cfg) {
-        qemu_log_mask(LOG_GUEST_ERROR,
-                      "%s error decoding the configuration for iommu mr=%s\n",
-                      __func__, mr->parent_obj.name);
         return;
     }
 
Signature · 1 line
2.20.1
#11 lore raw

Re: [Qemu-arm] [PATCH-for-4.2 v3 5/5] hw/arm/smmuv3: Remove spurious error messages on IOVA invalidations

Quoted 46 lines · Eric Auger

An IOVA/ASID invalidation is notified to all IOMMU Memory Regions through smmuv3_inv_notifiers_iova/smmuv3_notify_iova.

When the notification occurs it is possible that some of the PCIe devices associated to the notified regions do not have a valid stream table entry. In that case we output a LOG_GUEST_ERROR message, for example:

invalid sid=<SID> (L1STD span=0)
"smmuv3_notify_iova error decoding the configuration for iommu mr=<MR>

This is unfortunate as the user gets the impression that there are some translation decoding errors whereas there are not.

This patch adds a new field in SMMUEventInfo that tells whether the detection of an invalid STE must lead to an error report. invalid_ste_allowed is set before doing the invalidations and kept unset on actual translation.

The other configuration decoding error messages are kept since if the STE is valid then the rest of the config must be correct.

---
 hw/arm/smmuv3-internal.h |  1 +
 hw/arm/smmuv3.c          | 15 ++++++++-------
 2 files changed, 9 insertions(+), 7 deletions(-)
hw/arm/smmuv3-internal.h +1 -0
index b160289cd1..d190181ef1 100644
@@ -381,6 +381,7 @@ typedef struct SMMUEventInfo {
     uint32_t sid;
     bool recorded;
     bool record_trans_faults;
+    bool inval_ste_allowed;
     union {
         struct {
             uint32_t ssid;
hw/arm/smmuv3.c +0 -0
index 2e270a0f07..517755aed5 100644

hw/arm/smmuv3.c static int decode_ste(SMMUv3State *s, SMMUTransCfg *cfg, · line 325

Quoted 7 lines
hw/arm/smmuv3.c +3 -1
@@ -320,7 +320,9 @@ static int decode_ste(SMMUv3State *s, SMMUTransCfg *cfg,
     uint32_t config;
 
     if (!STE_VALID(ste)) {
-        qemu_log_mask(LOG_GUEST_ERROR, "invalid STE\n");
+        if (!event->inval_ste_allowed) {
+            qemu_log_mask(LOG_GUEST_ERROR, "invalid STE\n");
+        }

Here the new flag check just suppresses the error log...

hw/arm/smmuv3.c static int smmu_find_ste(SMMUv3State *s, uint32_t sid, STE *ste, · line 413

Quoted 12 lines
hw/arm/smmuv3.c +1 -1
         goto bad_ste;
     }
 
@@ -405,7 +407,7 @@ static int smmu_find_ste(SMMUv3State *s, uint32_t sid, STE *ste,
 
         span = L1STD_SPAN(&l1std);
 
-        if (!span) {
+        if (!span && !event->inval_ste_allowed) {
             /* l2ptr is not valid */
             qemu_log_mask(LOG_GUEST_ERROR,
                           "invalid sid=%d (L1STD span=0)\n", sid);

...but here it suppresses both the error logging and also the setting of event->type and returning -EINVAL. Instead we'll fall through to the following code. Is that really OK?

thanks
-- PMM

author
#12 lore raw

Re: [Qemu-arm] [PATCH-for-4.2 v3 5/5] hw/arm/smmuv3: Remove spurious error messages on IOVA invalidations

Hi Peter,

Quoted 64 lines · Peter Maydell
Quoted 46 lines · Eric Auger

An IOVA/ASID invalidation is notified to all IOMMU Memory Regions through smmuv3_inv_notifiers_iova/smmuv3_notify_iova.

When the notification occurs it is possible that some of the PCIe devices associated to the notified regions do not have a valid stream table entry. In that case we output a LOG_GUEST_ERROR message, for example:

invalid sid=<SID> (L1STD span=0)
"smmuv3_notify_iova error decoding the configuration for iommu mr=<MR>

This is unfortunate as the user gets the impression that there are some translation decoding errors whereas there are not.

This patch adds a new field in SMMUEventInfo that tells whether the detection of an invalid STE must lead to an error report. invalid_ste_allowed is set before doing the invalidations and kept unset on actual translation.

The other configuration decoding error messages are kept since if the STE is valid then the rest of the config must be correct.

---
 hw/arm/smmuv3-internal.h |  1 +
 hw/arm/smmuv3.c          | 15 ++++++++-------
 2 files changed, 9 insertions(+), 7 deletions(-)
hw/arm/smmuv3-internal.h +1 -0
index b160289cd1..d190181ef1 100644
@@ -381,6 +381,7 @@ typedef struct SMMUEventInfo {
     uint32_t sid;
     bool recorded;
     bool record_trans_faults;
+    bool inval_ste_allowed;
     union {
         struct {
             uint32_t ssid;
hw/arm/smmuv3.c +0 -0
index 2e270a0f07..517755aed5 100644

hw/arm/smmuv3.c static int decode_ste(SMMUv3State *s, SMMUTransCfg *cfg, · line 325

Quoted 7 lines
hw/arm/smmuv3.c +3 -1
@@ -320,7 +320,9 @@ static int decode_ste(SMMUv3State *s, SMMUTransCfg *cfg,
     uint32_t config;
 
     if (!STE_VALID(ste)) {
-        qemu_log_mask(LOG_GUEST_ERROR, "invalid STE\n");
+        if (!event->inval_ste_allowed) {
+            qemu_log_mask(LOG_GUEST_ERROR, "invalid STE\n");
+        }

Here the new flag check just suppresses the error log...

Quoted 7 lines
hw/arm/smmuv3.c +0 -0
         goto bad_ste;
     }
 
@@ -405,7 +407,7 @@ static int smmu_find_ste(SMMUv3State *s, uint32_t sid, STE *ste,
 
         span = L1STD_SPAN(&l1std);
 
Quoted 9 lines

hw/arm/smmuv3.c static int smmu_find_ste(SMMUv3State *s, uint32_t sid, STE *ste, · line 413

Quoted 5 lines
hw/arm/smmuv3.c +1 -1
-        if (!span) {
+        if (!span && !event->inval_ste_allowed) {
             /* l2ptr is not valid */
             qemu_log_mask(LOG_GUEST_ERROR,
                           "invalid sid=%d (L1STD span=0)\n", sid);

...but here it suppresses both the error logging and also the setting of event->type and returning -EINVAL. Instead we'll fall through to the following code. Is that really OK?

Sorry for the delay, I was off.

Yes it's wrong I should only suppress the log. Curiously it had no other impact on the execution while testing.

Thanks

Eric

Quoted 4 lines

thanks
-- PMM