Skip to contentSkip to conversation

imx: add u-boot-nand.imx target

PATCH New Igor Opaniuk 2 participants 2 messages Jul 24, 2019 – Jul 25, 2019

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

PATCH v3 1/1 imx: add u-boot-nand.imx target

From: Igor Opaniuk <[email protected]>

Add an additional target which prepends the u-boot.imx image with 0x400 padding bytes. On Vybrid and i.MX 7, i.MX6ULL this is required for NAND boot devices. The configuration CONFIG_IMX_NAND enables this image for a board.

---

v3:
- fixed depedency of Ksymbol

v2:
- addressed Jagan's comment

 Kconfig                    | 1 +
 Makefile                   | 3 +++
 arch/arm/mach-imx/Makefile | 7 +++++++
 3 files changed, 11 insertions(+)
Kconfig +1 -0
index d2eb744e70..c9473e00a9 100644
@@ -253,6 +253,7 @@ config BUILD_TARGET
 	default "u-boot.itb" if SPL_LOAD_FIT && (ROCKCHIP_RK3399 || ARCH_SUNXI)
 	default "u-boot.kwb" if KIRKWOOD
 	default "u-boot-with-spl.bin" if ARCH_AT91 && SPL_NAND_SUPPORT
+	default "u-boot-nand.imx" if (ARCH_MX6 || ARCH_MX7) && NAND_BOOT
 	help
 	  Some SoCs need special image types (e.g. U-Boot binary
 	  with a special header) as build targets. By defining
Makefile +3 -0
index 73fdf70cdd..287b74dd50 100644
@@ -1106,6 +1106,9 @@ endif
 %.vyb: %.imx
 	$(Q)$(MAKE) $(build)=arch/arm/cpu/armv7/vf610 $@
 
+u-boot-nand.imx: u-boot.imx
+	$(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
+
 quiet_cmd_copy = COPY    $@
       cmd_copy = cp $< $@
 
arch/arm/mach-imx/Makefile +7 -0
index 898478fc4a..365a5951f1 100644
@@ -112,6 +112,13 @@ u-boot.imx: MKIMAGEOUTPUT = u-boot.imx.log
 u-boot.imx: u-boot.bin u-boot.cfgout $(PLUGIN).bin FORCE
 	$(call if_changed,mkimage)
 
+ifeq ($(CONFIG_NAND_BOOT),y)
+cmd_u-boot-nand_imx = (dd bs=1024 count=1 if=/dev/zero 2>/dev/null) | \
+	cat - $< > $@
+u-boot-nand.imx: u-boot.imx FORCE
+	$(call if_changed,u-boot-nand_imx)
+endif
+
 ifeq ($(CONFIG_MULTI_DTB_FIT),y)
 MKIMAGEFLAGS_u-boot-dtb.imx = -n $(filter-out $(PLUGIN).bin $< $(PHONY),$^) \
 	-T $(IMAGE_TYPE) -e $(CONFIG_SYS_TEXT_BASE)
Signature · 1 line
2.17.1
#1 lore raw

PATCH v3 1/1 imx: add u-boot-nand.imx target

Quoted 10 lines · Igor Opaniuk

From: Igor Opaniuk <[email protected]>

Add an additional target which prepends the u-boot.imx image with 0x400 padding bytes. On Vybrid and i.MX 7, i.MX6ULL this is required for NAND boot devices. The configuration CONFIG_IMX_NAND enables this image for a board.

Quoted 64 lines

---

v3:
- fixed depedency of Ksymbol

v2:
- addressed Jagan's comment

 Kconfig                    | 1 +
 Makefile                   | 3 +++
 arch/arm/mach-imx/Makefile | 7 +++++++
 3 files changed, 11 insertions(+)
Kconfig +1 -0
index d2eb744e70..c9473e00a9 100644
@@ -253,6 +253,7 @@ config BUILD_TARGET
        default "u-boot.itb" if SPL_LOAD_FIT && (ROCKCHIP_RK3399 || ARCH_SUNXI)
        default "u-boot.kwb" if KIRKWOOD
        default "u-boot-with-spl.bin" if ARCH_AT91 && SPL_NAND_SUPPORT
+       default "u-boot-nand.imx" if (ARCH_MX6 || ARCH_MX7) && NAND_BOOT
        help
          Some SoCs need special image types (e.g. U-Boot binary
          with a special header) as build targets. By defining
Makefile +3 -0
index 73fdf70cdd..287b74dd50 100644
@@ -1106,6 +1106,9 @@ endif
 %.vyb: %.imx
        $(Q)$(MAKE) $(build)=arch/arm/cpu/armv7/vf610 $@
 
+u-boot-nand.imx: u-boot.imx
+       $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
+
 quiet_cmd_copy = COPY    $@
       cmd_copy = cp $< $@
 
arch/arm/mach-imx/Makefile +7 -1
index 898478fc4a..365a5951f1 100644
@@ -112,6 +112,13 @@ u-boot.imx: MKIMAGEOUTPUT = u-boot.imx.log
 u-boot.imx: u-boot.bin u-boot.cfgout $(PLUGIN).bin FORCE
        $(call if_changed,mkimage)
 
+ifeq ($(CONFIG_NAND_BOOT),y)
+cmd_u-boot-nand_imx = (dd bs=1024 count=1 if=/dev/zero 2>/dev/null) | \
+       cat - $< > $@
+u-boot-nand.imx: u-boot.imx FORCE
+       $(call if_changed,u-boot-nand_imx)
+endif
+
 ifeq ($(CONFIG_MULTI_DTB_FIT),y)
 MKIMAGEFLAGS_u-boot-dtb.imx = -n $(filter-out $(PLUGIN).bin $< $(PHONY),$^) \
        -T $(IMAGE_TYPE) -e $(CONFIG_SYS_TEXT_BASE)
--

2.17.1

_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
https://lists.denx.de/listinfo/u-boot

Signature · 6 lines
Best regards
Oleksandr Suvorov

Toradex AG
Altsagenstrasse 5 | 6048 Horw/Luzern | Switzerland | T: +41 41 500
4800 (main line)