imx: add u-boot-nand.imx target
Subsystems (4)
PATCH v3 1/1 imx: add u-boot-nand.imx target
From: Igor Opaniuk <[email protected]>
Add an additional target which prepends the u-boot.imx image with 0x400 padding bytes. On Vybrid and i.MX 7, i.MX6ULL this is required for NAND boot devices. The configuration CONFIG_IMX_NAND enables this image for a board.
---
v3:
- fixed depedency of Ksymbol
v2:
- addressed Jagan's comment
Kconfig | 1 + Makefile | 3 +++ arch/arm/mach-imx/Makefile | 7 +++++++ 3 files changed, 11 insertions(+)
Kconfig +1 -0
@@ -253,6 +253,7 @@ config BUILD_TARGET default "u-boot.itb" if SPL_LOAD_FIT && (ROCKCHIP_RK3399 || ARCH_SUNXI) default "u-boot.kwb" if KIRKWOOD default "u-boot-with-spl.bin" if ARCH_AT91 && SPL_NAND_SUPPORT + default "u-boot-nand.imx" if (ARCH_MX6 || ARCH_MX7) && NAND_BOOT help Some SoCs need special image types (e.g. U-Boot binary with a special header) as build targets. By defining
Makefile +3 -0
@@ -1106,6 +1106,9 @@ endif %.vyb: %.imx $(Q)$(MAKE) $(build)=arch/arm/cpu/armv7/vf610 $@ +u-boot-nand.imx: u-boot.imx + $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@ + quiet_cmd_copy = COPY $@ cmd_copy = cp $< $@
arch/arm/mach-imx/Makefile +7 -0
@@ -112,6 +112,13 @@ u-boot.imx: MKIMAGEOUTPUT = u-boot.imx.log u-boot.imx: u-boot.bin u-boot.cfgout $(PLUGIN).bin FORCE $(call if_changed,mkimage) +ifeq ($(CONFIG_NAND_BOOT),y) +cmd_u-boot-nand_imx = (dd bs=1024 count=1 if=/dev/zero 2>/dev/null) | \ + cat - $< > $@ +u-boot-nand.imx: u-boot.imx FORCE + $(call if_changed,u-boot-nand_imx) +endif + ifeq ($(CONFIG_MULTI_DTB_FIT),y) MKIMAGEFLAGS_u-boot-dtb.imx = -n $(filter-out $(PLUGIN).bin $< $(PHONY),$^) \ -T $(IMAGE_TYPE) -e $(CONFIG_SYS_TEXT_BASE)
Signature · 1 line
2.17.1
PATCH v3 1/1 imx: add u-boot-nand.imx target
Quoted 10 lines · Igor Opaniuk
From: Igor Opaniuk <[email protected]>
Add an additional target which prepends the u-boot.imx image with
0x400padding bytes. On Vybrid and i.MX 7, i.MX6ULL this is required for NAND boot devices. The configurationCONFIG_IMX_NANDenables this image for a board.Signed-off-by Stefan Agner <[email protected]>Signed-off-by Igor Opaniuk <[email protected]>
Quoted 64 lines
---
v3:
- fixed depedency of Ksymbolv2:
- addressed Jagan's commentKconfig | 1 + Makefile | 3 +++ arch/arm/mach-imx/Makefile | 7 +++++++ 3 files changed, 11 insertions(+)Kconfig +1
-0@@ -253,6 +253,7 @@ config BUILD_TARGET default "u-boot.itb" if SPL_LOAD_FIT && (ROCKCHIP_RK3399 || ARCH_SUNXI) default "u-boot.kwb" if KIRKWOOD default "u-boot-with-spl.bin" if ARCH_AT91 && SPL_NAND_SUPPORT + default "u-boot-nand.imx" if (ARCH_MX6 || ARCH_MX7) && NAND_BOOT help Some SoCs need special image types (e.g. U-Boot binary with a special header) as build targets. By definingMakefile +3
-0@@ -1106,6 +1106,9 @@ endif %.vyb: %.imx $(Q)$(MAKE) $(build)=arch/arm/cpu/armv7/vf610 $@ +u-boot-nand.imx: u-boot.imx + $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@ + quiet_cmd_copy = COPY $@ cmd_copy = cp $< $@arch/arm/mach-imx/Makefile +7
-1@@ -112,6 +112,13 @@ u-boot.imx: MKIMAGEOUTPUT = u-boot.imx.log u-boot.imx: u-boot.bin u-boot.cfgout $(PLUGIN).bin FORCE $(call if_changed,mkimage) +ifeq ($(CONFIG_NAND_BOOT),y) +cmd_u-boot-nand_imx = (dd bs=1024 count=1 if=/dev/zero 2>/dev/null) | \ + cat - $< > $@ +u-boot-nand.imx: u-boot.imx FORCE + $(call if_changed,u-boot-nand_imx) +endif + ifeq ($(CONFIG_MULTI_DTB_FIT),y) MKIMAGEFLAGS_u-boot-dtb.imx = -n $(filter-out $(PLUGIN).bin $< $(PHONY),$^) \ -T $(IMAGE_TYPE) -e $(CONFIG_SYS_TEXT_BASE) --2.17.1
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
https://lists.denx.de/listinfo/u-boot
Signature · 6 lines
Best regards Oleksandr Suvorov Toradex AG Altsagenstrasse 5 | 6048 Horw/Luzern | Switzerland | T: +41 41 500 4800 (main line)