Extend mv88e61xx driver to support 88E6071
Subsystems (2)
v3 cover Extend mv88e61xx driver to support 88E6071
This series adds support for 88E6071 switches in the mv88e61xx driver.
Changes in v3:
- Add Reviewed-/Tested-by tags
patch 1
- drop DEVADDR_PORT to avoid macros with local variable
- describe variables added to priv struct
- reword comments in mv88e61xx_priv_reg_offs_pre_init()
- add comment in get_phy_id() to explain why calling mv88e61xx_priv_reg_offs_pre_init() is required
patch 2
- remove unused PORT_REG_STATUS_SPEED_WIDTH macro
patch 4
- describe model numbers in numerical order
Changes in v2:
- fix port init for 6096/6097 devices in patch 1/6
- update commit description in patch 4/6
Anatolij Gustschin (6):
net: phy: mv88e61xx: rework to enable detection of 88E6071 devices
net: phy: mv88e61xx: add CPU port parameter init for 88E6071
net: phy: mv88E61xx: fix ENERGY_DET init for mv88E6071
net: phy: mv88E61xx: add config option for mv88E6071 support
net: phy: mv88e61xx: register phy_driver struct for 88E6071
net: phy: fix switch vendor name
drivers/net/phy/Kconfig | 9 +- drivers/net/phy/mv88e61xx.c | 189 ++++++++++++++++++++++++++++-------- 2 files changed, 156 insertions(+), 42 deletions(-)
Signature · 1 line
2.17.1
PATCH v3 1/6 net: phy: mv88e61xx: rework to enable detection of 88E6071 devices
Extend the driver to init switch register offsets from variables instead of compile time macros and enable 88E6071 detection. Ethernet transfer (e.g. tftp) does not work yet, so enable the registration of the 'indirect mii' bus for easier PHY register access by 'mii' command.
--- drivers/net/phy/mv88e61xx.c | 113 +++++++++++++++++++++++++++++------- 1 file changed, 92 insertions(+), 21 deletions(-)
drivers/net/phy/mv88e61xx.c +92 -21
@@ -39,15 +39,11 @@#define PHY_AUTONEGOTIATE_TIMEOUT 5000 -#define PORT_COUNT 11 -#define PORT_MASK ((1 << PORT_COUNT) - 1) +#define PORT_MASK (port_count) ((1 << (port_count)) - 1)/* Device addresses */ #define DEVADDR_PHY (p) (p) -#define DEVADDR_PORT (p) (0x10 + (p))#define DEVADDR_SERDES 0x0F -#define DEVADDR_GLOBAL_1 0x1B -#define DEVADDR_GLOBAL_2 0x1C/* SMI indirection registers for multichip addressing mode */ #define SMI_CMD_REG 0x00
@@ -188,11 +184,16 @@#define PORT_SWITCH_ID_6176 0x1760#define PORT_SWITCH_ID_6240 0x2400#define PORT_SWITCH_ID_6352 0x3520 +#define PORT_SWITCH_ID_6071 0x0710struct mv88e61xx_phy_priv {struct mii_dev *mdio_bus;int smi_addr;int id; +int port_count;/* Number of switch ports */ +int port_reg_base;/* Base of the switch port registers */ +u8 global1;/* Offset of Switch Global 1 registers */ +u8 global2;/* Offset of Switch Global 2 registers */ };static inline int smi_cmd (int cmd,int addr,int reg)
@@ -329,11 +330,12 @@ static int mv88e61xx_reg_write(struct phy_device *phydev, int dev, int reg,static int mv88e61xx_phy_wait (struct phy_device *phydev) { +struct mv88e61xx_phy_priv *priv = phydev->priv;int val;u32 timeout =100 ; do { - val = mv88e61xx_reg_read(phydev, DEVADDR_GLOBAL_2, + val = mv88e61xx_reg_read(phydev, priv->global2, GLOBAL2_REG_PHY_CMD); if (val >= 0 && (val & SMI_BUSY) == 0) return 0;
@@ -347,13 +349,15 @@ static int mv88e61xx_phy_wait(struct phy_device *phydev)static int mv88e61xx_phy_read_indirect (struct mii_dev *smi_wrapper,int dev,int devad,int reg) { +struct mv88e61xx_phy_priv *priv;struct phy_device *phydev;int res; phydev = (struct phy_device *)smi_wrapper->priv; + priv = phydev->priv;/* Issue command to read */ - res =mv88e61xx_reg_write (phydev,DEVADDR_GLOBAL_2 , + res =mv88e61xx_reg_write (phydev, priv->global2,GLOBAL2_REG_PHY_CMD ,smi_cmd_read (dev, reg));
@@ -363,25 +367,27 @@ static int mv88e61xx_phy_read_indirect(struct mii_dev *smi_wrapper, int dev,return res;/* Read retrieved data */ -return mv88e61xx_reg_read (phydev,DEVADDR_GLOBAL_2 , +return mv88e61xx_reg_read (phydev, priv->global2,GLOBAL2_REG_PHY_DATA ); }static int mv88e61xx_phy_write_indirect (struct mii_dev *smi_wrapper,int dev,int devad,int reg,u16 data) { +struct mv88e61xx_phy_priv *priv;struct phy_device *phydev;int res; phydev = (struct phy_device *)smi_wrapper->priv; + priv = phydev->priv;/* Set the data to write */ - res =mv88e61xx_reg_write (phydev,DEVADDR_GLOBAL_2 , + res =mv88e61xx_reg_write (phydev, priv->global2,GLOBAL2_REG_PHY_DATA , data);if (res <0 )return res;/* Issue the write command */ - res =mv88e61xx_reg_write (phydev,DEVADDR_GLOBAL_2 , + res =mv88e61xx_reg_write (phydev, priv->global2,GLOBAL2_REG_PHY_CMD ,smi_cmd_write (dev, reg));if (res <0 )
@@ -408,13 +414,18 @@ static int mv88e61xx_phy_write(struct phy_device *phydev, int phy,static int mv88e61xx_port_read (struct phy_device *phydev,u8 port,u8 reg) { -return mv88e61xx_reg_read (phydev,DEVADDR_PORT (port), reg); +struct mv88e61xx_phy_priv *priv = phydev->priv; + +return mv88e61xx_reg_read (phydev, priv->port_reg_base + port, reg); }static int mv88e61xx_port_write (struct phy_device *phydev,u8 port,u8 reg,u16 val) { -return mv88e61xx_reg_write (phydev,DEVADDR_PORT (port), reg, val); +struct mv88e61xx_phy_priv *priv = phydev->priv; + +return mv88e61xx_reg_write (phydev, priv->port_reg_base + port, + reg, val); }static int mv88e61xx_set_page (struct phy_device *phydev,u8 phy,u8 page)
@@ -515,12 +526,13 @@ static int mv88e61xx_parse_status(struct phy_device *phydev)static int mv88e61xx_switch_reset (struct phy_device *phydev) { +struct mv88e61xx_phy_priv *priv = phydev->priv;int time;int val;u8 port;/* Disable all ports */ -for (port =0 ; port <PORT_COUNT ; port++) { +for (port =0 ; port < priv->port_count; port++) { val =mv88e61xx_port_read (phydev, port,PORT_REG_CTRL );if (val <0 )return val;
@@ -536,18 +548,18 @@ static int mv88e61xx_switch_reset(struct phy_device *phydev)udelay (2000 );/* Reset switch */ - val =mv88e61xx_reg_read (phydev,DEVADDR_GLOBAL_1 ,GLOBAL1_CTRL ); + val =mv88e61xx_reg_read (phydev, priv->global1,GLOBAL1_CTRL );if (val <0 )return val; val |=GLOBAL1_CTRL_SWRESET ; - val =mv88e61xx_reg_write (phydev,DEVADDR_GLOBAL_1 , + val =mv88e61xx_reg_write (phydev, priv->global1,GLOBAL1_CTRL , val);if (val <0 )return val;/* Wait up to 1 second for switch reset complete */ for (time =1000 ; time; time--) { - val =mv88e61xx_reg_read (phydev,DEVADDR_GLOBAL_1 , + val =mv88e61xx_reg_read (phydev, priv->global1,GLOBAL1_CTRL );if (val >=0 && ((val &GLOBAL1_CTRL_SWRESET ) ==0 ))break ;
@@ -732,22 +744,23 @@ static int mv88e61xx_fixed_port_setup(struct phy_device *phydev, u8 port)static int mv88e61xx_set_cpu_port (struct phy_device *phydev) { +struct mv88e61xx_phy_priv *priv = phydev->priv;int val;/* Set CPUDest */ - val =mv88e61xx_reg_read (phydev,DEVADDR_GLOBAL_1 ,GLOBAL1_MON_CTRL ); + val =mv88e61xx_reg_read (phydev, priv->global1,GLOBAL1_MON_CTRL );if (val <0 )return val; val =bitfield_replace (val,GLOBAL1_MON_CTRL_CPUDEST_SHIFT ,GLOBAL1_MON_CTRL_CPUDEST_WIDTH ,CONFIG_MV88E61XX_CPU_PORT ); - val =mv88e61xx_reg_write (phydev,DEVADDR_GLOBAL_1 , + val =mv88e61xx_reg_write (phydev, priv->global1,GLOBAL1_MON_CTRL , val);if (val <0 )return val;/* Allow CPU to route to any port */ - val =PORT_MASK & ~(1 <<CONFIG_MV88E61XX_CPU_PORT ); + val =PORT_MASK (priv->port_count) & ~(1 <<CONFIG_MV88E61XX_CPU_PORT ); val =mv88e61xx_port_set_vlan (phydev,CONFIG_MV88E61XX_CPU_PORT , val);if (val <0 )return val;
@@ -856,6 +869,30 @@ static int mv88e61xx_phy_config_port(struct phy_device *phydev, u8 phy)return 0 ; } +/* +* This function is used to pre-configure the required register +* offsets, so that the indirect register access to the PHY registers +* is possible. This is necessary to be able to read the chip ID +* while driver probing or in get_phy_id(). +*/ +static void mv88e61xx_priv_reg_offs_pre_init (struct mv88e61xx_phy_priv *priv) +{ +/* +* Initial 'port_reg_base' value must be an offset of existing +* port register. The globalN register offsets must be correct, +* otherwise detection of switch ID won't work! +*/ +#ifndef CONFIG_MV88E61XX_88E6020_FAMILY + priv->global1 =0x1B ; + priv->global2 =0x1C ; + priv->port_reg_base =0x10 ; +#else + priv->global1 =0x0F ; + priv->global2 =0x07 ; + priv->port_reg_base =0x08 ; +#endif +} +static int mv88e61xx_probe (struct phy_device *phydev) {struct mii_dev *smi_wrapper;
@@ -910,13 +947,38 @@ static int mv88e61xx_probe(struct phy_device *phydev) phydev->priv = priv; +mv88e61xx_priv_reg_offs_pre_init (priv); + priv->id =mv88e61xx_get_switch_id (phydev); +debug ("%s ID 0x%x\n" , __func__, priv->id); + +switch (priv->id) { +case PORT_SWITCH_ID_6096 : +case PORT_SWITCH_ID_6097 : +case PORT_SWITCH_ID_6172 : +case PORT_SWITCH_ID_6176 : +case PORT_SWITCH_ID_6240 : +case PORT_SWITCH_ID_6352 : + priv->port_count =11 ; +break ; +case PORT_SWITCH_ID_6071 : + priv->port_count =7 ; +break ; +default : +free (priv); +return -ENODEV ; + } + + res =mdio_register (smi_wrapper); +if (res) +printf ("Failed to register SMI bus\n" );return 0 ; }static int mv88e61xx_phy_config (struct phy_device *phydev) { +struct mv88e61xx_phy_priv *priv = phydev->priv;int res;int i;int ret =-1 ;
@@ -925,7 +987,7 @@ static int mv88e61xx_phy_config(struct phy_device *phydev)if (res <0 )return res; -for (i =0 ; i <PORT_COUNT ; i++) { +for (i =0 ; i < priv->port_count; i++) {if ((1 << i) &CONFIG_MV88E61XX_PHY_PORTS ) { phydev->addr = i;
@@ -988,13 +1050,14 @@ static int mv88e61xx_phy_is_connected(struct phy_device *phydev)static int mv88e61xx_phy_startup (struct phy_device *phydev) { +struct mv88e61xx_phy_priv *priv = phydev->priv;int i;int link =0 ;int res;int speed = phydev->speed;int duplex = phydev->duplex; -for (i =0 ; i <PORT_COUNT ; i++) { +for (i =0 ; i < priv->port_count; i++) {if ((1 << i) &CONFIG_MV88E61XX_PHY_PORTS ) { phydev->addr = i;if (!mv88e61xx_phy_is_connected (phydev))
@@ -1068,6 +1131,14 @@ int get_phy_id(struct mii_dev *bus, int smi_addr, int devad, u32 *phy_id) temp_phy.priv = &temp_priv; temp_mii.priv = &temp_phy; +/* +* get_phy_id() can be called by framework before mv88e61xx driver +* probing, in this case the global register offsets are not +* initialised yet. Do this initialisation here before indirect +* PHY register access. +*/ +mv88e61xx_priv_reg_offs_pre_init (&temp_priv); + val =mv88e61xx_phy_read_indirect (&temp_mii,0 , devad,MII_PHYSID1 );if (val <0 )return -EIO ;
Signature · 1 line
2.17.1
PATCH v3 1/6 net: phy: mv88e61xx: rework to enable detection of 88E6071 devices
Quoted 10 lines · Anatolij Gustschin
Extend the driver to init switch register offsets from variables instead of compile time macros and enable 88E6071 detection. Ethernet transfer (e.g. tftp) does not work yet, so enable the registration of the 'indirect mii' bus for easier PHY register access by 'mii' command.
Signed-off-by Anatolij Gustschin <[email protected]>Reviewed-by Chris Packham <[email protected]>Tested-by Chris Packham <[email protected]>
Nit below.
Quoted 8 lines
--- drivers/net/phy/mv88e61xx.c | 113 +++++++++++++++++++++++++++++------- 1 file changed, 92 insertions(+), 21 deletions(-)drivers/net/phy/mv88e61xx.c +0
-0
[ ... ]
drivers/net/phy/mv88e61xx.c int get_phy_id(struct mii_dev *bus, int smi_addr, int devad, u32 *phy_id) · line 1137
Quoted 8 lines
drivers/net/phy/mv88e61xx.c +4
-0@@ -1068,6 +1131,14 @@ int get_phy_id(struct mii_dev *bus, int smi_addr, int devad, u32 *phy_id) temp_phy.priv = &temp_priv; temp_mii.priv = &temp_phy; +/* +* get_phy_id() can be called by framework before mv88e61xx driver +* probing, in this case the global register offsets are not +* initialised yet. Do this initialisation here before indirect
initialised -> initialized
initialisation -> initialization
Quoted 14 lines
drivers/net/phy/mv88e61xx.c +4
-1+* PHY register access. +*/ +mv88e61xx_priv_reg_offs_pre_init (&temp_priv); + val =mv88e61xx_phy_read_indirect (&temp_mii,0 , devad,MII_PHYSID1 );if (val <0 )return -EIO ; --2.17.1
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
https://lists.denx.de/listinfo/u-boot
PATCH v3 1/6 net: phy: mv88e61xx: rework to enable detection of 88E6071 devices
Hi Joe,
On Mon, 29 Jul 2019 18:35:47 -0500
Joe Hershberger joe.hershberger at gmail.com wrote:
...
Quoted 4 lines
Quoted 1 line
+ * initialised yet. Do this initialisation here before indirect
initialised -> initialized
initialisation -> initialization
Fixed in v4 series. Thanks!
--
Anatolij
PATCH v3 2/6 net: phy: mv88e61xx: add CPU port parameter init for 88E6071
In reply to Anatolij GustschinOn 88E6071 chip the port status register bit field offsets for duplex and link bits differ. Extend the driver to use 88E6071 specific offset values. The width of bit fields for speed status differ, too. Adapt for proper port speed detection on 88E6071.
--- drivers/net/phy/mv88e61xx.c | 42 ++++++++++++++++++++++++------------- 1 file changed, 28 insertions(+), 14 deletions(-)
drivers/net/phy/mv88e61xx.c +28 -14
@@ -84,11 +84,7 @@#define GLOBAL1_MON_CTRL_CPUDEST_SHIFT 4#define GLOBAL1_MON_CTRL_CPUDEST_WIDTH 4 -#define PORT_REG_STATUS_LINK BIT(11) -#define PORT_REG_STATUS_DUPLEX BIT(10) -#define PORT_REG_STATUS_SPEED_SHIFT 8 -#define PORT_REG_STATUS_SPEED_WIDTH 2#define PORT_REG_STATUS_SPEED_10 0#define PORT_REG_STATUS_SPEED_100 1#define PORT_REG_STATUS_SPEED_1000 2
@@ -107,6 +103,7 @@#define PORT_REG_PHYS_CTRL_DUPLEX_VALUE BIT(3)#define PORT_REG_PHYS_CTRL_DUPLEX_FORCE BIT(2)#define PORT_REG_PHYS_CTRL_SPD1000 BIT(1) +#define PORT_REG_PHYS_CTRL_SPD100 BIT(0)#define PORT_REG_PHYS_CTRL_SPD_MASK (BIT(1) | BIT(0))#define PORT_REG_CTRL_PSTATE_SHIFT 0
@@ -192,6 +189,9 @@ struct mv88e61xx_phy_priv {int id;int port_count;/* Number of switch ports */ int port_reg_base;/* Base of the switch port registers */ +u16 port_stat_link_mask;/* Bitmask for port link status bits */ +u16 port_stat_dup_mask;/* Bitmask for port duplex status bits */ +u8 port_stat_speed_width;/* Width of speed status bitfield */ u8 global1;/* Offset of Switch Global 1 registers */ u8 global2;/* Offset of Switch Global 2 registers */ };
@@ -640,6 +640,7 @@ static int mv88e61xx_port_set_vlan(struct phy_device *phydev, u8 port,static int mv88e61xx_read_port_config (struct phy_device *phydev,u8 port) { +struct mv88e61xx_phy_priv *priv = phydev->priv;int res;int val;bool forced = false;
@@ -647,7 +648,7 @@ static int mv88e61xx_read_port_config(struct phy_device *phydev, u8 port) val =mv88e61xx_port_read (phydev, port,PORT_REG_STATUS );if (val <0 )return val; -if (!(val &PORT_REG_STATUS_LINK )) { +if (!(val & priv->port_stat_link_mask)) {/* Temporarily force link to read port configuration */ u32 timeout =100 ; forced = true;
@@ -670,7 +671,7 @@ static int mv88e61xx_read_port_config(struct phy_device *phydev, u8 port) res = -EIO ; goto unforce; } -if (val &PORT_REG_STATUS_LINK ) +if (val & priv->port_stat_link_mask)break ; }while (--timeout);
@@ -680,13 +681,13 @@ static int mv88e61xx_read_port_config(struct phy_device *phydev, u8 port) } } -if (val &PORT_REG_STATUS_DUPLEX ) +if (val & priv->port_stat_dup_mask) phydev->duplex =DUPLEX_FULL ;else phydev->duplex =DUPLEX_HALF ; val =bitfield_extract (val,PORT_REG_STATUS_SPEED_SHIFT , -PORT_REG_STATUS_SPEED_WIDTH ); + priv->port_stat_speed_width);switch (val) {case PORT_REG_STATUS_SPEED_1000 : phydev->speed =SPEED_1000 ;
@@ -719,6 +720,7 @@ unforce:static int mv88e61xx_fixed_port_setup (struct phy_device *phydev,u8 port) { +struct mv88e61xx_phy_priv *priv = phydev->priv;int val; val =mv88e61xx_port_read (phydev, port,PORT_REG_PHYS_CTRL );
@@ -726,13 +728,19 @@ static int mv88e61xx_fixed_port_setup(struct phy_device *phydev, u8 port)return val; val &= ~(PORT_REG_PHYS_CTRL_SPD_MASK | -PORT_REG_PHYS_CTRL_FC_VALUE ); - val |=PORT_REG_PHYS_CTRL_PCS_AN_EN | -PORT_REG_PHYS_CTRL_PCS_AN_RST | -PORT_REG_PHYS_CTRL_FC_FORCE | +PORT_REG_PHYS_CTRL_FC_VALUE | +PORT_REG_PHYS_CTRL_FC_FORCE ); + val |=PORT_REG_PHYS_CTRL_FC_FORCE |PORT_REG_PHYS_CTRL_DUPLEX_VALUE | -PORT_REG_PHYS_CTRL_DUPLEX_FORCE | -PORT_REG_PHYS_CTRL_SPD1000 ; +PORT_REG_PHYS_CTRL_DUPLEX_FORCE ; + +if (priv->id ==PORT_SWITCH_ID_6071 ) { + val |=PORT_REG_PHYS_CTRL_SPD100 ; + }else { + val |=PORT_REG_PHYS_CTRL_PCS_AN_EN | +PORT_REG_PHYS_CTRL_PCS_AN_RST | +PORT_REG_PHYS_CTRL_SPD1000 ; + }if (port ==CONFIG_MV88E61XX_CPU_PORT ) val |= PORT_REG_PHYS_CTRL_LINK_VALUE |
@@ -960,9 +968,15 @@ static int mv88e61xx_probe(struct phy_device *phydev)case PORT_SWITCH_ID_6240 :case PORT_SWITCH_ID_6352 : priv->port_count =11 ; + priv->port_stat_link_mask =BIT (11 ); + priv->port_stat_dup_mask =BIT (10 ); + priv->port_stat_speed_width =2 ;break ;case PORT_SWITCH_ID_6071 : priv->port_count =7 ; + priv->port_stat_link_mask =BIT (12 ); + priv->port_stat_dup_mask =BIT (9 ); + priv->port_stat_speed_width =1 ;break ;default :free (priv);
Signature · 1 line
2.17.1
PATCH v3 2/6 net: phy: mv88e61xx: add CPU port parameter init for 88E6071
Quoted 10 lines · Anatolij Gustschin
On 88E6071 chip the port status register bit field offsets for duplex and link bits differ. Extend the driver to use 88E6071 specific offset values. The width of bit fields for speed status differ, too. Adapt for proper port speed detection on 88E6071.
Signed-off-by Anatolij Gustschin <[email protected]>Reviewed-by Chris Packham <[email protected]>Tested-by Chris Packham <[email protected]>
PATCH v3 3/6 net: phy: mv88E61xx: fix ENERGY_DET init for mv88E6071
In reply to Anatolij GustschinOn mv88E6071 the 'EDet' field offset, width and sense control bits are different, adjust the driver to init the PHY control register as needed. This fixes not working link detection and tftp transfers.
--- drivers/net/phy/mv88e61xx.c | 22 ++++++++++++++++------ 1 file changed, 16 insertions(+), 6 deletions(-)
drivers/net/phy/mv88e61xx.c +16 -6
@@ -117,14 +117,12 @@#define SERDES_REG_CTRL_1_FORCE_LINK BIT(10) -#define PHY_REG_CTRL1_ENERGY_DET_SHIFT 8 -#define PHY_REG_CTRL1_ENERGY_DET_WIDTH 2 -/* Field values */ #define PORT_REG_CTRL_PSTATE_DISABLED 0#define PORT_REG_CTRL_PSTATE_FORWARD 3#define PHY_REG_CTRL1_ENERGY_DET_OFF 0 +#define PHY_REG_CTRL1_ENERGY_DET_SENSE_PULSE 1#define PHY_REG_CTRL1_ENERGY_DET_SENSE_ONLY 2#define PHY_REG_CTRL1_ENERGY_DET_SENSE_XMIT 3
@@ -194,6 +192,9 @@ struct mv88e61xx_phy_priv {u8 port_stat_speed_width;/* Width of speed status bitfield */ u8 global1;/* Offset of Switch Global 1 registers */ u8 global2;/* Offset of Switch Global 2 registers */ +u8 phy_ctrl1_en_det_shift;/* 'EDet' bit field offset */ +u8 phy_ctrl1_en_det_width;/* Width of 'EDet' bit field */ +u8 phy_ctrl1_en_det_ctrl;/* 'EDet' control value */ };static inline int smi_cmd (int cmd,int addr,int reg)
@@ -842,6 +843,7 @@ static int mv88e61xx_phy_enable(struct phy_device *phydev, u8 phy)static int mv88e61xx_phy_setup (struct phy_device *phydev,u8 phy) { +struct mv88e61xx_phy_priv *priv = phydev->priv;int val;/*
@@ -851,9 +853,9 @@ static int mv88e61xx_phy_setup(struct phy_device *phydev, u8 phy) val =mv88e61xx_phy_read (phydev, phy,PHY_REG_CTRL1 );if (val <0 )return val; - val =bitfield_replace (val,PHY_REG_CTRL1_ENERGY_DET_SHIFT , -PHY_REG_CTRL1_ENERGY_DET_WIDTH , -PHY_REG_CTRL1_ENERGY_DET_SENSE_XMIT ); + val =bitfield_replace (val, priv->phy_ctrl1_en_det_shift, + priv->phy_ctrl1_en_det_width, + priv->phy_ctrl1_en_det_ctrl); val =mv88e61xx_phy_write (phydev, phy,PHY_REG_CTRL1 , val);if (val <0 )return val;
@@ -971,12 +973,20 @@ static int mv88e61xx_probe(struct phy_device *phydev) priv->port_stat_link_mask =BIT (11 ); priv->port_stat_dup_mask =BIT (10 ); priv->port_stat_speed_width =2 ; + priv->phy_ctrl1_en_det_shift =8 ; + priv->phy_ctrl1_en_det_width =2 ; + priv->phy_ctrl1_en_det_ctrl = +PHY_REG_CTRL1_ENERGY_DET_SENSE_XMIT ;break ;case PORT_SWITCH_ID_6071 : priv->port_count =7 ; priv->port_stat_link_mask =BIT (12 ); priv->port_stat_dup_mask =BIT (9 ); priv->port_stat_speed_width =1 ; + priv->phy_ctrl1_en_det_shift =14 ; + priv->phy_ctrl1_en_det_width =1 ; + priv->phy_ctrl1_en_det_ctrl = +PHY_REG_CTRL1_ENERGY_DET_SENSE_PULSE ;break ;default :free (priv);
Signature · 1 line
2.17.1
PATCH v3 3/6 net: phy: mv88E61xx: fix ENERGY_DET init for mv88E6071
Quoted 9 lines · Anatolij Gustschin
On mv88E6071 the 'EDet' field offset, width and sense control bits are different, adjust the driver to init the PHY control register as needed. This fixes not working link detection and tftp transfers.
Signed-off-by Anatolij Gustschin <[email protected]>Reviewed-by Chris Packham <[email protected]>Tested-by Chris Packham <[email protected]>
PATCH v3 4/6 net: phy: mv88E61xx: add config option for mv88E6071 support
In reply to Anatolij GustschinMV88E61XX_88E6020_FAMILY option enables support for switch devices 6020/6070/6071/6220/6250.
--- drivers/net/phy/Kconfig | 7 +++++++ 1 file changed, 7 insertions(+)
drivers/net/phy/Kconfig +7 -0
@@ -50,6 +50,13 @@ config MV88E61XX_SWITCH if MV88E61XX_SWITCH +config MV88E61XX_88E6020_FAMILY + bool "Marvell MV88E6020 family support." + help + The driver supports 6172/6176/6240/6352 devices in the + default configuration. Select this option to enable support + for 6020/6070/6071/6220/6250 switches. + config MV88E61XX_CPU_PORT int "CPU Port"
Signature · 1 line
2.17.1
PATCH v3 5/6 net: phy: mv88e61xx: register phy_driver struct for 88E6071
In reply to Anatolij GustschinSupport probing and init for 88E6071 switch.
--- drivers/net/phy/mv88e61xx.c | 12 ++++++++++++ 1 file changed, 12 insertions(+)
drivers/net/phy/mv88e61xx.c +12 -0
@@ -1127,10 +1127,22 @@ static struct phy_driver mv88e609x_driver = { .shutdown = &genphy_shutdown, }; +static struct phy_driver mv88e6071_driver = { + .name ="Marvell MV88E6071" , + .uid =0x1410db0 , + .mask =0xfffffff0 , + .features =PHY_BASIC_FEATURES |SUPPORTED_MII , + .probe = mv88e61xx_probe, + .config = mv88e61xx_phy_config, + .startup = mv88e61xx_phy_startup, + .shutdown = &genphy_shutdown, +}; +int phy_mv88e61xx_init (void ) {phy_register (&mv88e61xx_driver);phy_register (&mv88e609x_driver); +phy_register (&mv88e6071_driver);return 0 ; }
Signature · 1 line
2.17.1
PATCH v3 5/6 net: phy: mv88e61xx: register phy_driver struct for 88E6071
Quoted 6 lines · Anatolij Gustschin
Support probing and init for 88E6071 switch.
Signed-off-by Anatolij Gustschin <[email protected]>Reviewed-by Chris Packham <[email protected]>Tested-by Chris Packham <[email protected]>
PATCH v3 6/6 net: phy: fix switch vendor name
In reply to Anatolij GustschinFix vendor name in MV88E61xx option description.
--- drivers/net/phy/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/phy/Kconfig +1 -1
@@ -46,7 +46,7 @@ config B53_PHY_PORTS endif # B53_SWITCH config MV88E61XX_SWITCH - bool "Marvel MV88E61xx Ethernet switch PHY support." + bool "Marvell MV88E61xx Ethernet switch PHY support." if MV88E61XX_SWITCH
Signature · 1 line
2.17.1
PATCH v3 6/6 net: phy: fix switch vendor name
Quoted 6 lines · Anatolij Gustschin
Fix vendor name in MV88E61xx option description.
Signed-off-by Anatolij Gustschin <[email protected]>Reviewed-by Chris Packham <[email protected]>Tested-by Chris Packham <[email protected]>