arm64: dts: allwinner: Enable DDC regulator for Beelink GS1
Subsystems (2)
PATCH 1/1 arm64: dts: allwinner: Enable DDC regulator for Beelink GS1
Beelink GS1 has a DDC I2C bus voltage shifter. This is actually missing and video is limited to 1024x768 due to missing EDID information.
Add the DDC regulator in the device-tree.
Signed-off-by Clément Péron <[email protected]>
--- arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts | 1 + 1 file changed, 1 insertion(+)
arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts +1 -0
@@ -25,6 +25,7 @@ connector { compatible = "hdmi-connector"; type = "a"; + ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */ port { hdmi_con_in: endpoint {
Signature · 1 line
2.20.1
Maxime Ripard
AppliedQuoted 6 lines · Clément Péron
Beelink GS1 has a DDC I2C bus voltage shifter. This is actually missing and video is limited to 1024x768 due to missing EDID information.
Add the DDC regulator in the device-tree.
Signed-off-by Clément Péron <[email protected]>
Applied, thanks
Maxime
--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com