Skip to contentSkip to conversation

arm64: dts: allwinner: Enable DDC regulator for Beelink GS1

PATCH Applied Clément Péron 2 participants 2 messages Aug 12, 2019

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 arm64: dts: allwinner: Enable DDC regulator for Beelink GS1

Beelink GS1 has a DDC I2C bus voltage shifter. This is actually missing and video is limited to 1024x768 due to missing EDID information.

Add the DDC regulator in the device-tree.

---
 arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts | 1 +
 1 file changed, 1 insertion(+)
arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts +1 -0
index 680dc29cb089..67d7f269c5da 100644
@@ -25,6 +25,7 @@
 	connector {
 		compatible = "hdmi-connector";
 		type = "a";
+		ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
 
 		port {
 			hdmi_con_in: endpoint {
Signature · 1 line
2.20.1
#1 lore raw
Quoted 6 lines · Clément Péron

Beelink GS1 has a DDC I2C bus voltage shifter. This is actually missing and video is limited to 1024x768 due to missing EDID information.

Add the DDC regulator in the device-tree.

Applied, thanks
Maxime

--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com