Skip to contentSkip to conversation

dt-bindings: pinctrl: qcom-pmic-gpio: Add pm8150 support

PATCH In review Vinod Koul 2 participants 6 messages Aug 14, 2019 – Aug 23, 2019

Subsystems (6)
lore
Share & tools
lore

Vinod Koul

author
#0 lore raw

PATCH 1/3 dt-bindings: pinctrl: qcom-pmic-gpio: Add pm8150 support

Add support for the PM8150 GPIO support to the Qualcomm PMIC GPIO binding.

---
 Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt | 3 +++
 drivers/pinctrl/qcom/pinctrl-spmi-gpio.c                     | 2 ++
 2 files changed, 5 insertions(+)
Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt +3 -0
index 7f64a7e92c28..56553c06f129 100644
@@ -21,6 +21,7 @@ PMIC's from Qualcomm.
 		    "qcom,pmi8994-gpio"
 		    "qcom,pmi8998-gpio"
 		    "qcom,pms405-gpio"
+		    "qcom,pm8150-gpio"
 
 		    And must contain either "qcom,spmi-gpio" or "qcom,ssbi-gpio"
 		    if the device is on an spmi bus or an ssbi bus respectively
@@ -94,6 +95,8 @@ to specify in a pin configuration subnode:
 		    gpio1-gpio22 for pma8084
 		    gpio1-gpio10 for pmi8994
 		    gpio1-gpio12 for pms405 (holes on gpio1, gpio9 and gpio10)
+		    gpio1-gpio10 for pm8150 (holes on gpio2, gpio5, gpio7
+					     and gpio8)
 
 - function:
 	Usage: required
drivers/pinctrl/qcom/pinctrl-spmi-gpio.c +2 -0
index f39da87ea185..5286ec060894 100644
@@ -1155,6 +1155,8 @@ static const struct of_device_id pmic_gpio_of_match[] = {
 	{ .compatible = "qcom,pma8084-gpio", .data = (void *) 22 },
 	/* pms405 has 12 GPIOs with holes on 1, 9, and 10 */
 	{ .compatible = "qcom,pms405-gpio", .data = (void *) 12 },
+	/* pm8150 has 10 GPIOs with holes on 2, 5, 7 and 8 */
+	{ .compatible = "qcom,pm8150-gpio", .data = (void *) 10 },
 	{ },
 };
 
Signature · 1 line
2.20.1
author
#1 lore raw

PATCH 2/3 dt-bindings: pinctrl: qcom-pmic-gpio: Add pm8150b support

Add support for the PM8150b GPIO support to the Qualcomm PMIC GPIO binding.

---
 Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt | 2 ++
 drivers/pinctrl/qcom/pinctrl-spmi-gpio.c                     | 2 ++
 2 files changed, 4 insertions(+)
Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt +2 -0
index 56553c06f129..457459d17e79 100644
@@ -22,6 +22,7 @@ PMIC's from Qualcomm.
 		    "qcom,pmi8998-gpio"
 		    "qcom,pms405-gpio"
 		    "qcom,pm8150-gpio"
+		    "qcom,pm8150b-gpio"
 
 		    And must contain either "qcom,spmi-gpio" or "qcom,ssbi-gpio"
 		    if the device is on an spmi bus or an ssbi bus respectively
@@ -97,6 +98,7 @@ to specify in a pin configuration subnode:
 		    gpio1-gpio12 for pms405 (holes on gpio1, gpio9 and gpio10)
 		    gpio1-gpio10 for pm8150 (holes on gpio2, gpio5, gpio7
 					     and gpio8)
+		    gpio1-gpio12 for pm8150b (holes on gpio3, gpio4, gpio7)
 
 - function:
 	Usage: required
drivers/pinctrl/qcom/pinctrl-spmi-gpio.c +2 -0
index 5286ec060894..931c9349f145 100644
@@ -1157,6 +1157,8 @@ static const struct of_device_id pmic_gpio_of_match[] = {
 	{ .compatible = "qcom,pms405-gpio", .data = (void *) 12 },
 	/* pm8150 has 10 GPIOs with holes on 2, 5, 7 and 8 */
 	{ .compatible = "qcom,pm8150-gpio", .data = (void *) 10 },
+	/* pm8150b has 12 GPIOs with holes on 3, r and 7 */
+	{ .compatible = "qcom,pm8150b-gpio", .data = (void *) 12 },
 	{ },
 };
 
Signature · 1 line
2.20.1
#2 lore raw

Re: [PATCH 2/3] dt-bindings: pinctrl: qcom-pmic-gpio: Add pm8150b support

Quoted 4 lines · Vinod Koul

Add support for the PM8150b GPIO support to the Qualcomm PMIC GPIO binding.

Patch applied.

Yours,
Linus Walleij

author
#3 lore raw

PATCH 3/3 dt-bindings: pinctrl: qcom-pmic-gpio: Add pm8150l support

In reply to Vinod Koul

Add support for the PM8150l GPIO support to the Qualcomm PMIC GPIO binding.

---
 Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt | 1 +
 drivers/pinctrl/qcom/pinctrl-spmi-gpio.c                     | 2 ++
 2 files changed, 3 insertions(+)
Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt +1 -0
index 457459d17e79..c32bf3237545 100644
@@ -99,6 +99,7 @@ to specify in a pin configuration subnode:
 		    gpio1-gpio10 for pm8150 (holes on gpio2, gpio5, gpio7
 					     and gpio8)
 		    gpio1-gpio12 for pm8150b (holes on gpio3, gpio4, gpio7)
+		    gpio1-gpio12 for pm8150l (hole on gpio7)
 
 - function:
 	Usage: required
drivers/pinctrl/qcom/pinctrl-spmi-gpio.c +2 -0
index 931c9349f145..6f935e46f12c 100644
@@ -1159,6 +1159,8 @@ static const struct of_device_id pmic_gpio_of_match[] = {
 	{ .compatible = "qcom,pm8150-gpio", .data = (void *) 10 },
 	/* pm8150b has 12 GPIOs with holes on 3, r and 7 */
 	{ .compatible = "qcom,pm8150b-gpio", .data = (void *) 12 },
+	/* pm8150l has 12 GPIOs with holes on 7 */
+	{ .compatible = "qcom,pm8150l-gpio", .data = (void *) 12 },
 	{ },
 };
 
Signature · 1 line
2.20.1
#4 lore raw

Re: [PATCH 3/3] dt-bindings: pinctrl: qcom-pmic-gpio: Add pm8150l support

Quoted 4 lines · Vinod Koul

Add support for the PM8150l GPIO support to the Qualcomm PMIC GPIO binding.

Patch applied.

Yours,
Linus Walleij