NFC: nxp-nci: clean up and new device support
Subsystems (4)
v4 cover NFC: nxp-nci: clean up and new device support
Few people reported that some laptops are coming with new ACPI ID for the devices should be supported by nxp-nci driver.
This series adds new ID (patch 2), cleans up the driver from legacy platform data and unifies GPIO request for Device Tree and ACPI (patches 3-6), removes dead or unneeded code (patches 7, 9, 11), constifies ID table (patch 8), removes comma in terminator line for better maintenance (patch 10) and rectifies Kconfig entry (patches 12-14).
It also contains a fix for NFC subsystem as suggested by Sedat.
Series has been tested by Sedat.
Changelog v4:
- rebased on top of latest linux-next
- appended cover letter
- elaborated removal of pr_fmt() in the patch 11 (David)
Andrey Konovalov (1):
NFC: fix attrs checks in netlink interface
Andy Shevchenko (11):
NFC: nxp-nci: Add NXP1001 to the ACPI ID table
NFC: nxp-nci: Get rid of platform data
NFC: nxp-nci: Convert to use GPIO descriptor
NFC: nxp-nci: Add GPIO ACPI mapping table
NFC: nxp-nci: Get rid of code duplication in ->probe()
NFC: nxp-nci: Get rid of useless label
NFC: nxp-nci: Constify acpi_device_id
NFC: nxp-nci: Drop of_match_ptr() use
NFC: nxp-nci: Drop comma in terminator lines
NFC: nxp-nci: Remove unused macro pr_fmt()
NFC: nxp-nci: Remove 'default n' for the core
Sedat Dilek (2):
NFC: nxp-nci: Clarify on supported chips
NFC: nxp-nci: Fix recommendation for NFC_NXP_NCI_I2C Kconfig
MAINTAINERS | 1 - drivers/nfc/nxp-nci/Kconfig | 7 +- drivers/nfc/nxp-nci/core.c | 2 - drivers/nfc/nxp-nci/i2c.c | 134 +++++++------------------- drivers/nfc/nxp-nci/nxp-nci.h | 1 - include/linux/platform_data/nxp-nci.h | 19 ---- net/nfc/netlink.c | 6 +- 7 files changed, 41 insertions(+), 129 deletions(-) delete mode 100644 include/linux/platform_data/nxp-nci.h
Signature · 1 line
2.20.1
PATCH v4 1/14 NFC: fix attrs checks in netlink interface
From: Andrey Konovalov <[email protected]>
nfc_genl_deactivate_target() relies on the NFC_ATTR_TARGET_INDEX attribute being present, but doesn't check whether it is actually provided by the user. Same goes for nfc_genl_fw_download() and NFC_ATTR_FIRMWARE_NAME.
This patch adds appropriate checks.
Found with syzkaller.
--- net/nfc/netlink.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
net/nfc/netlink.c +4 -2
@@ -970,7 +970,8 @@ static int nfc_genl_dep_link_down(struct sk_buff *skb, struct genl_info *info)int rc;u32 idx; -if (!info->attrs[NFC_ATTR_DEVICE_INDEX ]) +if (!info->attrs[NFC_ATTR_DEVICE_INDEX ] || + !info->attrs[NFC_ATTR_TARGET_INDEX ])return -EINVAL ; idx =nla_get_u32 (info->attrs[NFC_ATTR_DEVICE_INDEX ]);
@@ -1018,7 +1019,8 @@ static int nfc_genl_llc_get_params(struct sk_buff *skb, struct genl_info *info)struct sk_buff *msg =NULL ;u32 idx; -if (!info->attrs[NFC_ATTR_DEVICE_INDEX ]) +if (!info->attrs[NFC_ATTR_DEVICE_INDEX ] || + !info->attrs[NFC_ATTR_FIRMWARE_NAME ])return -EINVAL ; idx =nla_get_u32 (info->attrs[NFC_ATTR_DEVICE_INDEX ]);
Signature · 1 line
2.20.1
PATCH v4 2/14 NFC: nxp-nci: Add NXP1001 to the ACPI ID table
In reply to Andy ShevchenkoIt seems a lot of laptops are equipped with NXP NFC300 chip with the ACPI ID NXP1001 as per DSDT.
Append it to the driver's ACPI ID table.
--- drivers/nfc/nxp-nci/i2c.c | 1 + 1 file changed, 1 insertion(+)
drivers/nfc/nxp-nci/i2c.c +1 -0
@@ -396,6 +396,7 @@ MODULE_DEVICE_TABLE(of, of_nxp_nci_i2c_match);#ifdef CONFIG_ACPI static struct acpi_device_id acpi_id[] = { + {"NXP1001" }, {"NXP7471" }, { }, };
Signature · 1 line
2.20.1
PATCH v4 3/14 NFC: nxp-nci: Get rid of platform data
In reply to Andy ShevchenkoLegacy platform data must go away. We are on the safe side here since there are no users of it in the kernel.
If anyone by any odd reason needs it the GPIO lookup tables and built-in device properties at your service.
--- MAINTAINERS | 1 - drivers/nfc/nxp-nci/core.c | 1 - drivers/nfc/nxp-nci/i2c.c | 9 +-------- drivers/nfc/nxp-nci/nxp-nci.h | 1 - include/linux/platform_data/nxp-nci.h | 19 ------------------- 5 files changed, 1 insertion(+), 30 deletions(-) delete mode 100644 include/linux/platform_data/nxp-nci.h
MAINTAINERS +0 -1
@@ -11353,7 +11353,6 @@ F: include/net/nfc/ F: include/uapi/linux/nfc.h F: drivers/nfc/ F: include/linux/platform_data/nfcmrvl.h -F: include/linux/platform_data/nxp-nci.h F: Documentation/devicetree/bindings/net/nfc/ NFS, SUNRPC, AND LOCKD CLIENTS
drivers/nfc/nxp-nci/core.c +0 -1
@@ -14,7 +14,6 @@#include <linux/gpio.h> #include <linux/module.h> #include <linux/nfc.h> -#include <linux/platform_data/nxp-nci.h> #include <net/nfc/nci_core.h>
drivers/nfc/nxp-nci/i2c.c +1 -8
@@ -23,7 +23,6 @@#include <linux/gpio/consumer.h> #include <linux/of_gpio.h> #include <linux/of_irq.h> -#include <linux/platform_data/nxp-nci.h> #include <asm/unaligned.h> #include <net/nfc/nfc.h>
@@ -304,7 +303,6 @@ static int nxp_nci_i2c_probe(struct i2c_client *client, const struct i2c_device_id *id) {struct nxp_nci_i2c_phy *phy; -struct nxp_nci_nfc_platform_data *pdata;int r;if (!i2c_check_functionality (client->adapter,I2C_FUNC_I2C )) {
@@ -323,17 +321,12 @@ static int nxp_nci_i2c_probe(struct i2c_client *client, phy->i2c_dev = client;i2c_set_clientdata (client, phy); - pdata = client->dev.platform_data; - -if (!pdata && client->dev.of_node) { +if (client->dev.of_node) { r =nxp_nci_i2c_parse_devtree (client);if (r <0 ) {nfc_err (&client->dev,"Failed to get DT data\n" ); goto probe_exit; } - }else if (pdata) { - phy->gpio_en = pdata->gpio_en; - phy->gpio_fw = pdata->gpio_fw; }else if (ACPI_HANDLE (&client->dev)) { r =nxp_nci_i2c_acpi_config (phy);if (r <0 )
drivers/nfc/nxp-nci/nxp-nci.h +0 -1
@@ -14,7 +14,6 @@#include <linux/completion.h> #include <linux/firmware.h> #include <linux/nfc.h> -#include <linux/platform_data/nxp-nci.h> #include <net/nfc/nci_core.h>
include/linux/platform_data/nxp-nci.h deleted +0 -19
@@ -1,19 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* -* Generic platform data for the NXP NCI NFC chips. -* -* Copyright (C) 2014 NXP Semiconductors All rights reserved. -* -* Authors: Clément Perrochaud <[email protected]> -*/ - -#ifndef _NXP_NCI_H_ -#define _NXP_NCI_H_ - -struct nxp_nci_nfc_platform_data { -unsigned int gpio_en; -unsigned int gpio_fw; -unsigned int irq; -}; - -#endif /* _NXP_NCI_H_ */
Signature · 1 line
2.20.1
PATCH v4 4/14 NFC: nxp-nci: Convert to use GPIO descriptor
In reply to Andy ShevchenkoSince we got rid of platform data, the driver may use GPIO descriptor directly.
--- drivers/nfc/nxp-nci/core.c | 1 - drivers/nfc/nxp-nci/i2c.c | 60 ++++++++++---------------------------- 2 files changed, 15 insertions(+), 46 deletions(-)
drivers/nfc/nxp-nci/core.c +0 -1
@@ -11,7 +11,6 @@*/ #include <linux/delay.h> -#include <linux/gpio.h> #include <linux/module.h> #include <linux/nfc.h>
drivers/nfc/nxp-nci/i2c.c +15 -45
112 lines not on this page · raw message
Signature · 1 line
2.20.1
PATCH v4 5/14 NFC: nxp-nci: Add GPIO ACPI mapping table
In reply to Andy ShevchenkoIn order to unify GPIO resource request prepare gpiod_get_index() to behave correctly when there is no mapping provided by firmware.
Here we add explicit mapping between _CRS GpioIo() resources and their names used in the driver.
--- drivers/nfc/nxp-nci/i2c.c | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-)
drivers/nfc/nxp-nci/i2c.c +16 -2
@@ -247,6 +247,15 @@ static irqreturn_t nxp_nci_i2c_irq_thread_fn(int irq, void *phy_id)return IRQ_NONE ; } +static const struct acpi_gpio_params firmware_gpios = {1 ,0 , false }; +static const struct acpi_gpio_params enable_gpios = {2 ,0 , false }; + +static const struct acpi_gpio_mapping acpi_nxp_nci_gpios[] = { + {"enable-gpios" , &enable_gpios,1 }, + {"firmware-gpios" , &firmware_gpios,1 }, + { } +}; +static int nxp_nci_i2c_parse_devtree (struct i2c_client *client) {struct nxp_nci_i2c_phy *phy =i2c_get_clientdata (client);
@@ -269,9 +278,14 @@ static int nxp_nci_i2c_parse_devtree(struct i2c_client *client)static int nxp_nci_i2c_acpi_config (struct nxp_nci_i2c_phy *phy) {struct i2c_client *client = phy->i2c_dev; +int r; - phy->gpiod_en =devm_gpiod_get_index (&client->dev,NULL ,2 ,GPIOD_OUT_LOW ); - phy->gpiod_fw =devm_gpiod_get_index (&client->dev,NULL ,1 ,GPIOD_OUT_LOW ); + r =devm_acpi_dev_add_driver_gpios (&client->dev, acpi_nxp_nci_gpios); +if (r) +return r; + + phy->gpiod_en =devm_gpiod_get (&client->dev,"enable" ,GPIOD_OUT_LOW ); + phy->gpiod_fw =devm_gpiod_get (&client->dev,"firmware" ,GPIOD_OUT_LOW );if (IS_ERR (phy->gpiod_en) ||IS_ERR (phy->gpiod_fw)) {nfc_err (&client->dev,"No GPIOs\n" );
Signature · 1 line
2.20.1
PATCH v4 6/14 NFC: nxp-nci: Get rid of code duplication in ->probe()
In reply to Andy ShevchenkoSince OF and ACPI case almost the same get rid of code duplication by moving gpiod_get() calls directly to ->probe().
--- drivers/nfc/nxp-nci/i2c.c | 68 +++++++++------------------------------ 1 file changed, 15 insertions(+), 53 deletions(-)
drivers/nfc/nxp-nci/i2c.c +15 -53
@@ -256,48 +256,10 @@ static const struct acpi_gpio_mapping acpi_nxp_nci_gpios[] = { { } }; -static int nxp_nci_i2c_parse_devtree (struct i2c_client *client) -{ -struct nxp_nci_i2c_phy *phy =i2c_get_clientdata (client); - - phy->gpiod_en =devm_gpiod_get (&client->dev,"enable" ,GPIOD_OUT_LOW ); -if (IS_ERR (phy->gpiod_en)) { -nfc_err (&client->dev,"Failed to get EN gpio\n" ); -return PTR_ERR (phy->gpiod_en); - } - - phy->gpiod_fw =devm_gpiod_get (&client->dev,"firmware" ,GPIOD_OUT_LOW ); -if (IS_ERR (phy->gpiod_fw)) { -nfc_err (&client->dev,"Failed to get FW gpio\n" ); -return PTR_ERR (phy->gpiod_fw); - } - -return 0 ; -} - -static int nxp_nci_i2c_acpi_config (struct nxp_nci_i2c_phy *phy) -{ -struct i2c_client *client = phy->i2c_dev; -int r; - - r =devm_acpi_dev_add_driver_gpios (&client->dev, acpi_nxp_nci_gpios); -if (r) -return r; - - phy->gpiod_en =devm_gpiod_get (&client->dev,"enable" ,GPIOD_OUT_LOW ); - phy->gpiod_fw =devm_gpiod_get (&client->dev,"firmware" ,GPIOD_OUT_LOW ); - -if (IS_ERR (phy->gpiod_en) ||IS_ERR (phy->gpiod_fw)) { -nfc_err (&client->dev,"No GPIOs\n" ); -return -EINVAL ; - } - -return 0 ; -} -static int nxp_nci_i2c_probe (struct i2c_client *client,const struct i2c_device_id *id) { +struct device *dev = &client->dev;struct nxp_nci_i2c_phy *phy;int r;
@@ -317,20 +279,20 @@ static int nxp_nci_i2c_probe(struct i2c_client *client, phy->i2c_dev = client;i2c_set_clientdata (client, phy); -if (client->dev.of_node) { - r =nxp_nci_i2c_parse_devtree (client); -if (r <0 ) { -nfc_err (&client->dev,"Failed to get DT data\n" ); - goto probe_exit; - } - }else if (ACPI_HANDLE (&client->dev)) { - r =nxp_nci_i2c_acpi_config (phy); -if (r <0 ) - goto probe_exit; - }else { -nfc_err (&client->dev,"No platform data\n" ); - r = -EINVAL ; - goto probe_exit; + r =devm_acpi_dev_add_driver_gpios (dev, acpi_nxp_nci_gpios); +if (r) +return r; + + phy->gpiod_en =devm_gpiod_get (dev,"enable" ,GPIOD_OUT_LOW ); +if (IS_ERR (phy->gpiod_en)) { +nfc_err (dev,"Failed to get EN gpio\n" ); +return PTR_ERR (phy->gpiod_en); + } + + phy->gpiod_fw =devm_gpiod_get (dev,"firmware" ,GPIOD_OUT_LOW ); +if (IS_ERR (phy->gpiod_fw)) { +nfc_err (dev,"Failed to get FW gpio\n" ); +return PTR_ERR (phy->gpiod_fw); } r = nxp_nci_probe(phy, &client->dev, &i2c_phy_ops,
Signature · 1 line
2.20.1
PATCH v4 7/14 NFC: nxp-nci: Get rid of useless label
In reply to Andy ShevchenkoReturn directly in ->probe() since there no special cleaning is needed.
--- drivers/nfc/nxp-nci/i2c.c | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-)
drivers/nfc/nxp-nci/i2c.c +4 -8
@@ -265,16 +265,13 @@ static int nxp_nci_i2c_probe(struct i2c_client *client,if (!i2c_check_functionality (client->adapter,I2C_FUNC_I2C )) {nfc_err (&client->dev,"Need I2C_FUNC_I2C\n" ); - r = -ENODEV ; - goto probe_exit; +return -ENODEV ; } phy =devm_kzalloc (&client->dev,sizeof (struct nxp_nci_i2c_phy ),GFP_KERNEL ); -if (!phy) { - r = -ENOMEM ; - goto probe_exit; - } +if (!phy) +return -ENOMEM ; phy->i2c_dev = client;i2c_set_clientdata (client, phy);
@@ -298,7 +295,7 @@ static int nxp_nci_i2c_probe(struct i2c_client *client, r =nxp_nci_probe (phy, &client->dev, &i2c_phy_ops,NXP_NCI_I2C_MAX_PAYLOAD , &phy->ndev);if (r <0 ) - goto probe_exit; +return r; r = request_threaded_irq(client->irq, NULL, nxp_nci_i2c_irq_thread_fn,
@@ -307,7 +304,6 @@ static int nxp_nci_i2c_probe(struct i2c_client *client,if (r <0 )nfc_err (&client->dev,"Unable to register IRQ handler\n" ); -probe_exit:return r; }
Signature · 1 line
2.20.1
PATCH v4 8/14 NFC: nxp-nci: Constify acpi_device_id
In reply to Andy ShevchenkoThe content of acpi_device_id is not supposed to change at runtime. All functions working with acpi_device_id provided by <linux/acpi.h> work with const acpi_device_id. So mark the non-const structs as const.
--- drivers/nfc/nxp-nci/i2c.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/nfc/nxp-nci/i2c.c +1 -1
@@ -330,7 +330,7 @@ static const struct of_device_id of_nxp_nci_i2c_match[] = {MODULE_DEVICE_TABLE (of, of_nxp_nci_i2c_match);#ifdef CONFIG_ACPI -static struct acpi_device_id acpi_id[] = { +static const struct acpi_device_id acpi_id[] = { {"NXP1001" }, {"NXP7471" }, { },
Signature · 1 line
2.20.1
PATCH v4 9/14 NFC: nxp-nci: Drop of_match_ptr() use
In reply to Andy ShevchenkoThere is no need to guard OF device ID table with of_match_ptr(). Otherwise we would get a defined but not used data.
--- drivers/nfc/nxp-nci/i2c.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/nfc/nxp-nci/i2c.c +1 -1
@@ -342,7 +342,7 @@ static struct i2c_driver nxp_nci_i2c_driver = { .driver = { .name = NXP_NCI_I2C_DRIVER_NAME, .acpi_match_table = ACPI_PTR(acpi_id), - .of_match_table =of_match_ptr (of_nxp_nci_i2c_match), + .of_match_table = of_nxp_nci_i2c_match, }, .probe = nxp_nci_i2c_probe, .id_table = nxp_nci_i2c_id_table,
Signature · 1 line
2.20.1
PATCH v4 10/14 NFC: nxp-nci: Drop comma in terminator lines
In reply to Andy ShevchenkoThere is no need to have a comma after terminator entry in the arrays of IDs.
This may prevent the misguided addition behind the terminator without compiler notice.
Drop the comma in terminator lines for good.
--- drivers/nfc/nxp-nci/i2c.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/nfc/nxp-nci/i2c.c +2 -2
@@ -325,7 +325,7 @@ MODULE_DEVICE_TABLE(i2c, nxp_nci_i2c_id_table);static const struct of_device_id of_nxp_nci_i2c_match[] = { { .compatible ="nxp,nxp-nci-i2c" , }, - {}, + {} };MODULE_DEVICE_TABLE (of, of_nxp_nci_i2c_match);
@@ -333,7 +333,7 @@ MODULE_DEVICE_TABLE(of, of_nxp_nci_i2c_match);static const struct acpi_device_id acpi_id[] = { {"NXP1001" }, {"NXP7471" }, - { }, + { } };MODULE_DEVICE_TABLE (acpi, acpi_id);#endif
Signature · 1 line
2.20.1
PATCH v4 11/14 NFC: nxp-nci: Remove unused macro pr_fmt()
In reply to Andy ShevchenkoThe macro had never been used.
The driver uses mostly the nfc_err(), which, with other macros in the family, is backed by corresponding dev_err(). pr_fmt() is not used for dev_err() macro. Moreover, there is no need to print the module name which is part of the device instance name anyway.
--- drivers/nfc/nxp-nci/i2c.c | 2 -- 1 file changed, 2 deletions(-)
drivers/nfc/nxp-nci/i2c.c +0 -2
@@ -12,8 +12,6 @@* Copyright (C) 2012 Intel Corporation. All rights reserved. */ -#define pr_fmt (fmt) KBUILD_MODNAME ": " fmt -#include <linux/acpi.h> #include <linux/delay.h> #include <linux/i2c.h>
Signature · 1 line
2.20.1
PATCH v4 12/14 NFC: nxp-nci: Remove 'default n' for the core
In reply to Andy ShevchenkoIt seems contributors follow the style of Kconfig entries where explicit 'default n' is present. The default 'default' is 'n' already, thus, drop these lines from Kconfig to make it more clear.
--- drivers/nfc/nxp-nci/Kconfig | 1 - 1 file changed, 1 deletion(-)
drivers/nfc/nxp-nci/Kconfig +0 -1
@@ -2,7 +2,6 @@ config NFC_NXP_NCI tristate "NXP-NCI NFC driver" depends on NFC_NCI - default n ---help--- Generic core driver for NXP NCI chips such as the NPC100 or PN7150 families.
Signature · 1 line
2.20.1
PATCH v4 13/14 NFC: nxp-nci: Clarify on supported chips
In reply to Andy ShevchenkoFrom: Sedat Dilek <[email protected]>
This patch clarifies on the supported NXP NCI chips and families and lists PN547 and PN548 separately which are known as NPC100 respectively NPC300.
This helps to find informations and identify drivers on vendor's support websites.
For details see the discussion in [1] and [2].
[1] https://marc.info/?t=155774435600001&r=1&w=2
[2] https://patchwork.kernel.org/project/linux-wireless/list/?submitter=33142
--- drivers/nfc/nxp-nci/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/nfc/nxp-nci/Kconfig +2 -2
@@ -3,8 +3,8 @@ config NFC_NXP_NCI tristate "NXP-NCI NFC driver" depends on NFC_NCI ---help--- - Generic core driver for NXP NCI chips such as the NPC100 - or PN7150 families. + Generic core driver for NXP NCI chips such as the NPC100 (PN547), + NPC300 (PN548) or PN7150 families. This is a driver based on the NCI NFC kernel layers and will thus not work with NXP libnfc library.
Signature · 1 line
2.20.1
PATCH v4 14/14 NFC: nxp-nci: Fix recommendation for NFC_NXP_NCI_I2C Kconfig
In reply to Andy ShevchenkoFrom: Sedat Dilek <[email protected]>
This is a simple cleanup to the Kconfig help text as discussed in [1].
[1] https://marc.info/?t=155774435600001&r=1&w=2
--- drivers/nfc/nxp-nci/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/nfc/nxp-nci/Kconfig +1 -1
@@ -22,4 +22,4 @@ config NFC_NXP_NCI_I2C To compile this driver as a module, choose m here. The module will be called nxp_nci_i2c. - Say Y if unsure. + Say N if unsure.
Signature · 1 line
2.20.1
David Miller
maintainerFrom: Andy Shevchenko <[email protected]>
Date: Mon, 29 Jul 2019 16:35:00 +0300
Quoted 9 lines
Few people reported that some laptops are coming with new ACPI ID for the devices should be supported by nxp-nci driver.
This series adds new ID (patch 2), cleans up the driver from legacy platform data and unifies GPIO request for Device Tree and ACPI (patches 3-6), removes dead or unneeded code (patches 7, 9, 11), constifies ID table (patch 8), removes comma in terminator line for better maintenance (patch 10) and rectifies
Kconfigentry (patches 12-14).
Quoted 3 lines
It also contains a fix for NFC subsystem as suggested by Sedat.
Series has been tested by Sedat.
...
Series applied to net-next, thanks.
Quoted 43 lines
Andy Shevchenko <[email protected]> hat am 29. Juli 2019 15:35 geschrieben:
Few people reported that some laptops are coming with new ACPI ID for the devices should be supported by nxp-nci driver.
This series adds new ID (patch 2), cleans up the driver from legacy platform data and unifies GPIO request for Device Tree and ACPI (patches 3-6), removes dead or unneeded code (patches 7, 9, 11), constifies ID table (patch 8), removes comma in terminator line for better maintenance (patch 10) and rectifies
Kconfigentry (patches 12-14).It also contains a fix for NFC subsystem as suggested by Sedat.
Series has been tested by Sedat.
Changelog v4:
- rebased on top of latest linux-next
- appended cover letter
- elaborated removal ofpr_fmt()in the patch 11 (David)Andrey Konovalov (1):
NFC: fix attrs checks in netlink interfaceAndy Shevchenko (11):
NFC: nxp-nci: Add NXP1001 to the ACPI ID table
NFC: nxp-nci: Get rid of platform data
NFC: nxp-nci: Convert to use GPIO descriptor
NFC: nxp-nci: Add GPIO ACPI mapping table
NFC: nxp-nci: Get rid of code duplication in ->probe()
NFC: nxp-nci: Get rid of useless label
NFC: nxp-nci: Constifyacpi_device_id
NFC: nxp-nci: Dropof_match_ptr()use
NFC: nxp-nci: Drop comma in terminator lines
NFC: nxp-nci: Remove unused macropr_fmt()
NFC: nxp-nci: Remove 'default n' for the coreSedat Dilek (2):
NFC: nxp-nci: Clarify on supported chips
NFC: nxp-nci: Fix recommendation forNFC_NXP_NCI_I2CKconfig
Quoted 12 lines
MAINTAINERS | 1 - drivers/nfc/nxp-nci/Kconfig | 7 +- drivers/nfc/nxp-nci/core.c | 2 - drivers/nfc/nxp-nci/i2c.c | 134 +++++++------------------- drivers/nfc/nxp-nci/nxp-nci.h | 1 - include/linux/platform_data/nxp-nci.h | 19 ---- net/nfc/netlink.c | 6 +- 7 files changed, 41 insertions(+), 129 deletions(-) delete mode 100644 include/linux/platform_data/nxp-nci.hSignature · 1 line
2.20.1
Hi Andy,
I gave that patchset v4 a try against Linux v5.3-rc5.
And played with neard and neard-tools v0.16-0.1 from Debian/buster AMD64.
# nfctool --list
# nfctool --enable --device=nfc0
# nfctool --list --device=nfc0
nfc0:
Tags: [ tag11 ]
Devices: [ ]
Protocols: [ Felica MIFARE Jewel ISO-DEP NFC-DEP ]
Powered: Yes
RF Mode: Initiator
lto: 0
rw: 0
miux: 0# nfctool --device=nfc0 --poll=Both --sniff --dump-symm Start sniffer on nfc0
Start polling on nfc0 as both initiator and target
Targets found for nfc0
Tags: [ tag11 ]
Devices: [ ]
But I see in the logs:
# journalctl -u neard.service -f Aug 20 23:01:15 iniza neard[6158]: Error while reading NFC bytes
What does this error mean?
How can I get more informations?
Can you aid with debugging help?
Thanks in advance.
Regards,
- Sedat -
[1] https://github.com/nfc-tools/libnfc/issues/455#issuecomment-523185147
[2] https://github.com/nfc-tools/libnfc/issues/455#issuecomment-523195283
[3] https://github.com/nfc-tools/libnfc/issues/455#issuecomment-523198304
Signature · 14 lines
Mit freundlichen Grüssen Sedat Dilek Telefon: +49 2166 9901-153 E-Mail: [email protected] Internet: https://www.credativ.de/ GPG-Fingerprint: EA6D E17D D269 AC7E 101D C910 476F 2B3B 0AF7 F86B credativ GmbH, Trompeterallee 108, 41189 Mönchengladbach Handelsregister: Amtsgericht Mönchengladbach HRB 12080 USt-ID-Nummer DE204566209 Geschäftsführung: Dr. Michael Meskes, Jörg Folz, Sascha Heuer Unser Umgang mit personenbezogenen Daten unterliegt folgenden Bestimmungen: https://www.credativ.de/datenschutz/
Quoted 30 lines · Sedat Dilek
Quoted 1 line
Andy Shevchenko <[email protected]> hat am 29. Juli 2019 15:35 geschrieben:
I gave that patchset v4 a try against Linux v5.3-rc5.
And played with neard and neard-tools v0.16-0.1 from Debian/buster AMD64.
# nfctool --list# nfctool --enable --device=nfc0# nfctool --list --device=nfc0 nfc0: Tags: [ tag11 ] Devices: [ ] Protocols: [ Felica MIFARE Jewel ISO-DEP NFC-DEP ] Powered: Yes RF Mode: Initiator lto: 0 rw: 0 miux: 0# nfctool --device=nfc0 --poll=Both --sniff --dump-symm Start sniffer on nfc0Start polling on nfc0 as both initiator and target
Targets found for nfc0
Tags: [ tag11 ]
Devices: [ ]
Quoted 8 lines
But I see in the logs:
# journalctl -u neard.service -f Aug 20 23:01:15 iniza neard[6158]: Error while reading NFC bytesWhat does this error mean?
How can I get more informations?
Can you aid with debugging help?
Unfortunately I have no idea about user space tools. But I think neard has to be updated to match kernel somehow.
Signature · 2 lines
With Best Regards, Andy Shevchenko