arch: arm64: imx8mq: Add mux-controller to iomuxc_gpr
Subsystems (2)
cover arch: arm64: imx8mq: Add mux-controller to iomuxc_gpr
This adds a mux-controller to the iomuxc_gpr syscon. It will e.g. be used by the NWL DSI host controller driver.
Guido Günther (1):
arm64: dts: imx8mq: Add mux controller to iomuxc_gpr
arch/arm64/boot/dts/freescale/imx8mq.dtsi | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)
Signature · 1 line
2.20.1
PATCH 1/1 arm64: dts: imx8mq: Add mux controller to iomuxc_gpr
The only mux controls the MIPI DSI input selection.
Signed-off-by Guido Günther <[email protected]>
--- arch/arm64/boot/dts/freescale/imx8mq.dtsi | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)
arch/arm64/boot/dts/freescale/imx8mq.dtsi +8 -1
@@ -440,8 +440,15 @@ }; iomuxc_gpr: syscon@30340000 { - compatible = "fsl,imx8mq-iomuxc-gpr", "fsl,imx6q-iomuxc-gpr", "syscon"; + compatible = "fsl,imx8mq-iomuxc-gpr", "fsl,imx6q-iomuxc-gpr", + "syscon", "simple-mfd"; reg = <0x30340000 0x10000>; + + mux: mux-controller { + compatible = "mmio-mux"; + #mux-control-cells = <1>; + mux-reg-masks = <0x34 0x00000004>; /* MIPI_MUX_SEL */ + }; }; ocotp: ocotp-ctrl@30350000 {
Signature · 7 lines
2.20.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH 1/1] arm64: dts: imx8mq: Add mux controller to iomuxc_gpr
Quoted 3 lines · Guido Günther
The only mux controls the MIPI DSI input selection.
Signed-off-by Guido Günther <[email protected]>
Reviewed-by Philipp Zabel <[email protected]>
regards
Philipp
Quoted 25 lines
--- arch/arm64/boot/dts/freescale/imx8mq.dtsi | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)arch/arm64/boot/dts/freescale/imx8mq.dtsi +8
-1@@ -440,8 +440,15 @@ }; iomuxc_gpr: syscon@30340000 { - compatible = "fsl,imx8mq-iomuxc-gpr", "fsl,imx6q-iomuxc-gpr", "syscon"; + compatible = "fsl,imx8mq-iomuxc-gpr", "fsl,imx6q-iomuxc-gpr", + "syscon", "simple-mfd"; reg = <0x30340000 0x10000>; + + mux: mux-controller { + compatible = "mmio-mux"; + #mux-control-cells = <1>; + mux-reg-masks = <0x34 0x00000004>; /* MIPI_MUX_SEL */ + }; }; ocotp: ocotp-ctrl@30350000 {
Shawn Guo
AppliedRe: [PATCH 1/1] arm64: dts: imx8mq: Add mux controller to iomuxc_gpr
In reply to Guido GüntherQuoted 3 lines · Guido Günther
The only mux controls the MIPI DSI input selection.
Signed-off-by Guido Günther <[email protected]>
Applied, thanks.