spi: add NPCM FIU controller driver
Subsystems (3)
Tomer Maimon
maintainerv3 cover spi: add NPCM FIU controller driver
This patch set adds Flash Interface Unit(FIU) SPI master support for the Nuvoton NPCM Baseboard Management Controller (BMC).
The FIU supports single, dual or quad communication interface.
the FIU controller can operate in following modes:
- User Mode Access(UMA): provides flash access by using an indirect address/data mechanism.
- direct rd/wr mode: maps the flash memory into the core address space.
- SPI-X mode: used for an expansion bus to an ASIC or CPLD.
The NPCM750/730/715/710 supports up to three FIU devices:
- FIU0 supports two chip select.
- FIU3 supports four chip select.
- FIUX supports two chip select.
The NPCM FIU driver tested on NPCM750 evaluation board.
The FIU controller driver using direct map API SPI-MEM interface and tested with the latest m25p80 driver patch
https://www.spinics.net/lists/linux-mtd/msg07358.html
According a conversion about direct SPI-MEM API
https://www.spinics.net/lists/linux-mtd/msg08225.html
The m25p80 driver will merge to the spi-nor driver we need to make sure the m25p80 direct SPI-MEM will merge as well.
The FIU controller driver tested with the latest spi-nor driver patch
https://www.spinics.net/lists/linux-mtd/msg08472.html
Addressed comments from:
- Mark Brown: https://www.spinics.net/lists/linux-spi/msg18166.html
- Boris Brezillon: https://www.spinics.net/lists/linux-spi/msg18176.html
- Rob Herring: https://www.spinics.net/lists/linux-spi/msg18289.html
Changes since version 2:
- Remove unnecessary dev_info probe print.
- Support address SPI memory operation.
- Limit address size support.
- Add vendor prefix to spi-mode property dt-binding documentation.
Changes since version 1:
- Support spi-mem no data transferred option (SPI_MEM_NO_DATA)
Tomer Maimon (2):
dt-binding: spi: add NPCM FIU controller
spi: npcm-fiu: add NPCM FIU controller driver
.../bindings/spi/nuvoton,npcm-fiu.txt | 47 ++ drivers/spi/Kconfig | 10 + drivers/spi/Makefile | 1 + drivers/spi/spi-npcm-fiu.c | 771 ++++++++++++++++++ 4 files changed, 829 insertions(+) create mode 100644 Documentation/devicetree/bindings/spi/nuvoton,npcm-fiu.txt create mode 100644 drivers/spi/spi-npcm-fiu.c
Signature · 1 line
2.18.0
Tomer Maimon
maintainerPATCH v3 1/2 dt-binding: spi: add NPCM FIU controller
Added device tree binding documentation for Nuvoton BMC NPCM Flash Interface Unit(FIU) SPI master controller using SPI-MEM interface.
--- .../bindings/spi/nuvoton,npcm-fiu.txt | 47 +++++++++++++++++++ 1 file changed, 47 insertions(+) create mode 100644 Documentation/devicetree/bindings/spi/nuvoton,npcm-fiu.txt
Documentation/devicetree/bindings/spi/nuvoton,npcm-fiu.txt new file +47 -0
@@ -0,0 +1,47 @@ +* Nuvoton FLASH Interface Unit (FIU) SPI Controller + +NPCM FIU supports single, dual and quad communication interface. + +The NPCM7XX supports three FIU modules, +FIU0 and FIUx supports two chip selects, +FIU3 support four chip select. + +Required properties: + - compatible : "nuvoton,npcm750-fiu" for the NPCM7XX BMC + - #address-cells : should be 1. + - #size-cells : should be 0. + - reg : the first contains the register location and length, + the second contains the memory mapping address and length + - reg-names: Should contain the reg names "control" and "memory" + - clocks : phandle of FIU reference clock. + +Required properties in case the pins can be muxed: + - pinctrl-names : a pinctrl state named "default" must be defined. + - pinctrl-0 : phandle referencing pin configuration of the device. + +Optional property: + - nuvoton,spix-mode: enable spix-mode for an expansion bus to an ASIC or CPLD. + +Aliases: +- All the FIU controller nodes should be represented in the aliases node using + the following format 'fiu{n}' where n is a unique number for the alias. + In the NPCM7XX BMC: + fiu0 represent fiu 0 controller + fiu1 represent fiu 3 controller + fiu2 represent fiu x controller + +Example: +fiu3: spi@c00000000 { + compatible = "nuvoton,npcm750-fiu"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xfb000000 0x1000>, <0x80000000 0x10000000>; + reg-names = "control", "memory"; + clocks = <&clk NPCM7XX_CLK_AHB>; + pinctrl-names = "default"; + pinctrl-0 = <&spi3_pins>; + spi-nor@0 { + ... + }; +}; +
Signature · 1 line
2.18.0
Mark Brown
maintainerApplied "dt-binding: spi: add NPCM FIU controller" to the spi tree
The patch
dt-binding: spi: add NPCM FIU controller
has been applied to the spi tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-5.4
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark
Quoted 1 line
From
91d0c59f460fd61db977d35b0d7c057128e7f7b7Mon Sep 17 00:00:00 2001
From: Tomer Maimon <[email protected]>
Date: Wed, 28 Aug 2019 17:25:12 +0300
Subject: [PATCH] dt-binding: spi: add NPCM FIU controller
Added device tree binding documentation for Nuvoton BMC NPCM Flash Interface Unit(FIU) SPI master controller using SPI-MEM interface.
--- .../bindings/spi/nuvoton,npcm-fiu.txt | 47 +++++++++++++++++++ 1 file changed, 47 insertions(+) create mode 100644 Documentation/devicetree/bindings/spi/nuvoton,npcm-fiu.txt
Documentation/devicetree/bindings/spi/nuvoton,npcm-fiu.txt new file +47 -0
@@ -0,0 +1,47 @@ +* Nuvoton FLASH Interface Unit (FIU) SPI Controller + +NPCM FIU supports single, dual and quad communication interface. + +The NPCM7XX supports three FIU modules, +FIU0 and FIUx supports two chip selects, +FIU3 support four chip select. + +Required properties: + - compatible : "nuvoton,npcm750-fiu" for the NPCM7XX BMC + - #address-cells : should be 1. + - #size-cells : should be 0. + - reg : the first contains the register location and length, + the second contains the memory mapping address and length + - reg-names: Should contain the reg names "control" and "memory" + - clocks : phandle of FIU reference clock. + +Required properties in case the pins can be muxed: + - pinctrl-names : a pinctrl state named "default" must be defined. + - pinctrl-0 : phandle referencing pin configuration of the device. + +Optional property: + - nuvoton,spix-mode: enable spix-mode for an expansion bus to an ASIC or CPLD. + +Aliases: +- All the FIU controller nodes should be represented in the aliases node using + the following format 'fiu{n}' where n is a unique number for the alias. + In the NPCM7XX BMC: + fiu0 represent fiu 0 controller + fiu1 represent fiu 3 controller + fiu2 represent fiu x controller + +Example: +fiu3: spi@c00000000 { + compatible = "nuvoton,npcm750-fiu"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xfb000000 0x1000>, <0x80000000 0x10000000>; + reg-names = "control", "memory"; + clocks = <&clk NPCM7XX_CLK_AHB>; + pinctrl-names = "default"; + pinctrl-0 = <&spi3_pins>; + spi-nor@0 { + ... + }; +}; +
Signature · 1 line
2.20.1
Tomer Maimon
maintainerPATCH v3 2/2 spi: npcm-fiu: add NPCM FIU controller driver
In reply to Tomer MaimonAdd Nuvoton NPCM BMC Flash Interface Unit(FIU) SPI master controller driver using SPI-MEM interface.
The FIU supports single, dual or quad communication interface.
the FIU controller can operate in following modes:
- User Mode Access(UMA): provides flash access by using an indirect address/data mechanism.
- direct rd/wr mode: maps the flash memory into the core address space.
- SPI-X mode: used for an expansion bus to an ASIC or CPLD.
--- drivers/spi/Kconfig | 10 + drivers/spi/Makefile | 1 + drivers/spi/spi-npcm-fiu.c | 771 +++++++++++++++++++++++++++++++++++++ 3 files changed, 782 insertions(+) create mode 100644 drivers/spi/spi-npcm-fiu.c
drivers/spi/Kconfig +10 -0
@@ -433,6 +433,16 @@ config SPI_MT7621 help This selects a driver for the MediaTek MT7621 SPI Controller. +config SPI_NPCM_FIU + tristate "Nuvoton NPCM FLASH Interface Unit" + depends on ARCH_NPCM || COMPILE_TEST + depends on OF && HAS_IOMEM + help + This enables support for the Flash Interface Unit SPI controller + in master mode. + This driver does not support generic SPI. The implementation only + supports spi-mem interface. + config SPI_NPCM_PSPI tristate "Nuvoton NPCM PSPI Controller" depends on ARCH_NPCM || COMPILE_TEST
drivers/spi/Makefile +1 -0
@@ -63,6 +63,7 @@ obj-$(CONFIG_SPI_MT65XX) += spi-mt65xx.o obj-$(CONFIG_SPI_MT7621) += spi-mt7621.o obj-$(CONFIG_SPI_MXIC) += spi-mxic.o obj-$(CONFIG_SPI_MXS) += spi-mxs.o +obj-$(CONFIG_SPI_NPCM_FIU) += spi-npcm-fiu.o obj-$(CONFIG_SPI_NPCM_PSPI) += spi-npcm-pspi.o obj-$(CONFIG_SPI_NUC900) += spi-nuc900.o obj-$(CONFIG_SPI_NXP_FLEXSPI) += spi-nxp-fspi.o
drivers/spi/spi-npcm-fiu.c new file +771 -0
771 lines not on this page · raw message
Signature · 1 line
2.18.0
Mark Brown
maintainerApplied "spi: npcm-fiu: add NPCM FIU controller driver" to the spi tree
The patch
spi: npcm-fiu: add NPCM FIU controller driver
has been applied to the spi tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-5.4
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark
Quoted 1 line
From
ace55c411b11d9b12f500c7433bf469c26130182Mon Sep 17 00:00:00 2001
From: Tomer Maimon <[email protected]>
Date: Wed, 28 Aug 2019 17:25:13 +0300
Subject: [PATCH] spi: npcm-fiu: add NPCM FIU controller driver
Add Nuvoton NPCM BMC Flash Interface Unit(FIU) SPI master controller driver using SPI-MEM interface.
The FIU supports single, dual or quad communication interface.
the FIU controller can operate in following modes:
- User Mode Access(UMA): provides flash access by using an indirect address/data mechanism.
- direct rd/wr mode: maps the flash memory into the core address space.
- SPI-X mode: used for an expansion bus to an ASIC or CPLD.
--- drivers/spi/Kconfig | 10 + drivers/spi/Makefile | 1 + drivers/spi/spi-npcm-fiu.c | 771 +++++++++++++++++++++++++++++++++++++ 3 files changed, 782 insertions(+) create mode 100644 drivers/spi/spi-npcm-fiu.c
drivers/spi/Kconfig +10 -0
@@ -433,6 +433,16 @@ config SPI_MT7621 help This selects a driver for the MediaTek MT7621 SPI Controller. +config SPI_NPCM_FIU + tristate "Nuvoton NPCM FLASH Interface Unit" + depends on ARCH_NPCM || COMPILE_TEST + depends on OF && HAS_IOMEM + help + This enables support for the Flash Interface Unit SPI controller + in master mode. + This driver does not support generic SPI. The implementation only + supports spi-mem interface. + config SPI_NPCM_PSPI tristate "Nuvoton NPCM PSPI Controller" depends on ARCH_NPCM || COMPILE_TEST
drivers/spi/Makefile +1 -0
@@ -63,6 +63,7 @@ obj-$(CONFIG_SPI_MT65XX) += spi-mt65xx.o obj-$(CONFIG_SPI_MT7621) += spi-mt7621.o obj-$(CONFIG_SPI_MXIC) += spi-mxic.o obj-$(CONFIG_SPI_MXS) += spi-mxs.o +obj-$(CONFIG_SPI_NPCM_FIU) += spi-npcm-fiu.o obj-$(CONFIG_SPI_NPCM_PSPI) += spi-npcm-pspi.o obj-$(CONFIG_SPI_NUC900) += spi-nuc900.o obj-$(CONFIG_SPI_NXP_FLEXSPI) += spi-nxp-fspi.o
drivers/spi/spi-npcm-fiu.c new file +771 -0
771 lines not on this page · raw message
Signature · 1 line
2.20.1