DC states igt tests patch series

From: Jyoti Yadav <[email protected]>

This patch does the following changes to lib/igt_pm.c

(quoted diff) +0 -3

-dmc_loaded() will be used by new test i915_pm_dc.c which will validate
 Display C States. So moving the same to igt_pm library.
 
-Introduced igt_disable_runtime_pm() in order to disable runtime suspend
 for the function which support dc9.
 
-Changed the igt_pm_enable_sata_link_power_management() and
 igt_pm_restore_sata_link_power_management() in order to save
 and restore the sata link power policy by an exit handler.

v2: Simplify the comment section.
v3: Remove . from the subject line.
v4: Rebased, resolve conflicts in pm_rpm.c
Included patch set version change log.
v5: Listing actual change in patch set changelog to make review easier.
v6: igt's lib added support for disabling runtime suspend,
change in commit log. rebased due to test name pm_rpm changed to i915_pm_rpm.
v7: Addressed review comment by saving POWER_DIR values in
igt_disable_runtime_pm(). [Imre]
v8: Addressed the review comment, igt_pm_enable_sata_link_power_management
function to restore the original SATA link power policy if things fail by using an exit handler. [Imre]
v9: IGT failure fixture in i915_pm_backlight and i915_pm_rpm. v10:Review comment fixup in sata_link_power_management
lib functions. [Imre]
v11:Add igt_assert_fd(pm_status_fd) in igt_disable_runtime_pm().
[Imre & Petri]

Signed-off-by Jyoti Yadav <[email protected]>

Signed-off-by Anshuman Gupta <[email protected]>

---
 lib/igt_pm.c                   | 188 ++++++++++++++++++++++++---------
 lib/igt_pm.h                   |   6 +-
 tests/i915/i915_pm_backlight.c |   6 +-
 tests/i915/i915_pm_rpm.c       |  24 +----
 4 files changed, 150 insertions(+), 74 deletions(-)

lib/igt_pm.c +40 -47

index fd22273a..dd5022fc 100644
@@ -38,6 +38,7 @@
 #include "drmtest.h"
 #include "igt_pm.h"
 #include "igt_aux.h"
+#include "igt_sysfs.h"
 
 /**
  * SECTION:igt_pm

@@ -63,11 +64,16 @@ enum {
 #define MIN_POWER_STR		"min_power\n"
 /* Remember to fix this if adding longer strings */
 #define MAX_POLICY_STRLEN	strlen(MAX_PERFORMANCE_STR)
+int8_t *__sata_pm_policies;
+int __scsi_host_cnt;
 
 static char __igt_pm_audio_runtime_power_save[64];
 static char * __igt_pm_audio_runtime_control_path;
 static char __igt_pm_audio_runtime_control[64];
 
+static void __igt_pm_sata_link_pm_exit_handler(int sig);
+static void __igt_pm_restore_sata_link_power_management(void);
+
 static int __igt_pm_audio_restore_runtime_pm(void)
 {
 	int fd;

@@ -280,39 +286,26 @@ void igt_pm_enable_audio_runtime_pm(void)
 		igt_debug("Failed to enable audio runtime PM! (%d)\n", -err);
 }
 
-/**
- * igt_pm_enable_sata_link_power_management:
- *
- * Enable the min_power policy for SATA link power management.
- * Without this we cannot reach deep runtime power states.
- *
- * We don't have any assertions on open since the system might not have
- * a SATA host.
- *
- * Returns:
- * An opaque pointer to the data needed to restore the default values
- * after the test has terminated, or NULL if SATA link power management
- * is not supported. This pointer should be freed when no longer used
- * (typically after having called restore_sata_link_power_management()).
- */
-int8_t *igt_pm_enable_sata_link_power_management(void)
+static void __igt_pm_enable_sata_link_power_management(void)
 {
 	int fd, i;
 	ssize_t len;
 	char *buf;
 	char *file_name;
-	int8_t *link_pm_policies = NULL;
+	int8_t policy;
 
 	file_name = malloc(PATH_MAX);
 	buf = malloc(MAX_POLICY_STRLEN + 1);
 
-	for (i = 0; ; i++) {
-		int8_t policy;
-
+	for (__scsi_host_cnt = 0; ; __scsi_host_cnt++) {
 		snprintf(file_name, PATH_MAX,
 			 "/sys/class/scsi_host/host%d/link_power_management_policy",
-			 i);
+			 __scsi_host_cnt);
 
+		/*
+		 * We don't have any assertions on open since the system
+		 * might not have a SATA host.
+		 */
 		fd = open(file_name, O_RDWR);
 		if (fd < 0)
 			break;

@@ -332,12 +325,26 @@ int8_t *igt_pm_enable_sata_link_power_management(void)
 		else
 			policy = POLICY_UNKNOWN;
 
-		if (!(i % 256))
-			link_pm_policies = realloc(link_pm_policies,
-						   (i / 256 + 1) * 256 + 1);
+		if (!(__scsi_host_cnt % 256))
+			__sata_pm_policies = realloc(__sata_pm_policies,
+						     (__scsi_host_cnt / 256 + 1)
+						     * 256 + 1);
+
+		__sata_pm_policies[__scsi_host_cnt] = policy;
+		close(fd);
+	}
 
-		link_pm_policies[i] = policy;
-		link_pm_policies[i + 1] = 0;
+	igt_install_exit_handler(__igt_pm_sata_link_pm_exit_handler);
+
+	for (i = 0; i < __scsi_host_cnt; i++) {
+		snprintf(file_name, PATH_MAX,
+			 "/sys/class/scsi_host/host%d/link_power_management_policy",
+			 i);
+		fd = open(file_name, O_RDWR);
+		if (fd < 0)
+			break;
+
+		policy = __sata_pm_policies[i];
 
 		/* If the policy is something we don't know about,
 		 * don't touch it, since we might potentially break things.

@@ -355,39 +362,25 @@ int8_t *igt_pm_enable_sata_link_power_management(void)
 	}
 	free(buf);
 	free(file_name);
-
-	return link_pm_policies;
 }
 
-/**
- * igt_pm_restore_sata_link_power_management:
- * @pm_data: An opaque pointer with saved link PM policies;
- *           If NULL is passed we force enable the "max_performance" policy.
- *
- * Restore the link power management policies to the values
- * prior to enabling min_power.
- *
- * Caveat: If the system supports hotplugging and hotplugging takes
- *         place during our testing so that the hosts change numbers
- *         we might restore the settings to the wrong hosts.
- */
-void igt_pm_restore_sata_link_power_management(int8_t *pm_data)
-
+static void __igt_pm_restore_sata_link_power_management(void)
 {
 	int fd, i;
 	char *file_name;
 
+	if (!__sata_pm_policies)
+		return;
+
 	/* Disk runtime PM policies. */
 	file_name = malloc(PATH_MAX);
-	for (i = 0; ; i++) {
+	for (i = 0; i < __scsi_host_cnt; i++) {
 		int8_t policy;
 
-		if (!pm_data)
-			policy = POLICY_MAX_PERFORMANCE;
-		else if (pm_data[i] == POLICY_UNKNOWN)
+		if (__sata_pm_policies[i] == POLICY_UNKNOWN)
 			continue;
 		else
-			policy = pm_data[i];
+			policy = __sata_pm_policies[i];
 
 		snprintf(file_name, PATH_MAX,
 			 "/sys/class/scsi_host/host%d/link_power_management_policy",

@@ -421,7 +414,49 @@ void igt_pm_restore_sata_link_power_management(int8_t *pm_data)
 		close(fd);
 	}
 	free(file_name);

lib/igt_pm.c +32 -0

+ */
+void igt_pm_enable_sata_link_power_management(void)
+{
+	/* Check if has been already saved. */
+	if (__sata_pm_policies)
+		return;
+
+	 __igt_pm_enable_sata_link_power_management();
 }
+
+/**
+ * igt_pm_restore_sata_link_power_management:
+ *
+ * Restore the link power management policies to the values
+ * prior to enabling min_power.
+ *
+ * Caveat: If the system supports hotplugging and hotplugging takes
+ *         place during our testing so that the hosts change numbers
+ *         we might restore the settings to the wrong hosts.
+ */
+void igt_pm_restore_sata_link_power_management(void)
+{
+	if (!__sata_pm_policies)
+		return;
+
+	 __igt_pm_restore_sata_link_power_management();
+}
+
+static void __igt_pm_sata_link_pm_exit_handler(int sig)
+{
+	__igt_pm_restore_sata_link_power_management();
+}
+
 #define POWER_DIR "/sys/devices/pci0000:00/0000:00:02.0/power"
 /* We just leak this on exit ... */
 int pm_status_fd = -1;

@@ -585,6 +620,39 @@ bool igt_setup_runtime_pm(void)
 	return true;
 }

lib/igt_pm.c +50 -0

+ */
+bool igt_disable_runtime_pm(void)
+{
+	int fd;
+	ssize_t size;
+	char buf[6];
+
+	igt_assert_fd(pm_status_fd);
+
+	/* We know we support runtime PM, let's try to disable it now. */
+	fd = open(POWER_DIR "/control", O_RDWR);
+	igt_assert_f(fd >= 0, "Can't open " POWER_DIR "/control\n");
+
+	size = write(fd, "on\n", 3);
+	igt_assert(size == 3);
+	lseek(fd, 0, SEEK_SET);
+	size = read(fd, buf, ARRAY_SIZE(buf));
+	igt_assert(size == 3);
+	igt_assert(strncmp(buf, "on\n", 3) == 0);
+	close(fd);
+
+	return true;
+}
+
 /**
  * igt_get_runtime_pm_status:
  *

@@ -628,3 +696,29 @@ bool igt_wait_for_pm_status(enum igt_runtime_pm_status status)
 {
 	return igt_wait(igt_get_runtime_pm_status() == status, 10000, 100);
 }
+
+/**
+ * dmc_loaded:
+ * @debugfs: fd to the debugfs dir.
+
+ * Check whether DMC FW is loaded or not. DMC FW is require for few Display C
+ * states like DC5 and DC6. FW does the Context Save and Restore during Display
+ * C States entry and exit.
+ *
+ * Returns:
+ * True if DMC FW is loaded otherwise false.
+ */
+bool igt_pm_dmc_loaded(int debugfs)
+{
+	char buf[15];
+	int len;
+
+	len = igt_sysfs_read(debugfs, "i915_dmc_info", buf, sizeof(buf) - 1);
+	if (len < 0)
+		return true; /* no CSR support, no DMC requirement */
+
+	buf[len] = '\0';
+
+	igt_info("DMC: %s\n", buf);
+	return strstr(buf, "fw loaded: yes");
+}

lib/igt_pm.h +4 -2

index 10cc6794..979b3463 100644
@@ -25,8 +25,8 @@
 #define IGT_PM_H
 
 void igt_pm_enable_audio_runtime_pm(void);
-int8_t *igt_pm_enable_sata_link_power_management(void);
-void igt_pm_restore_sata_link_power_management(int8_t *pm_data);
+void igt_pm_enable_sata_link_power_management(void);
+void igt_pm_restore_sata_link_power_management(void);
 
 /**
  * igt_runtime_pm_status:

@@ -47,8 +47,10 @@ enum igt_runtime_pm_status {
 };
 
 bool igt_setup_runtime_pm(void);
+bool igt_disable_runtime_pm(void);
 void igt_restore_runtime_pm(void);
 enum igt_runtime_pm_status igt_get_runtime_pm_status(void);
 bool igt_wait_for_pm_status(enum igt_runtime_pm_status status);
+bool igt_pm_dmc_loaded(int debugfs);
 
 #endif /* IGT_PM_H */

tests/i915/i915_pm_backlight.c +2 -4

index 4c1bff5b..9a5f4c37 100644
@@ -47,7 +47,6 @@ struct context {
 #define FADESPEED 100 /* milliseconds between steps */
 
 IGT_TEST_DESCRIPTION("Basic backlight sysfs test");
-static int8_t *pm_data = NULL;
 
 static int backlight_read(int *result, const char *fname)
 {

@@ -235,7 +234,7 @@ igt_main
 		igt_plane_set_fb(primary, &fb);
 
 		igt_display_commit2(&display, display.is_atomic ? COMMIT_ATOMIC : COMMIT_LEGACY);
-		pm_data = igt_pm_enable_sata_link_power_management();
+		igt_pm_enable_sata_link_power_management();
 	}
 
 	igt_subtest("basic-brightness")

@@ -255,8 +254,7 @@ igt_main
 
 		igt_display_fini(&display);
 		igt_remove_fb(display.drm_fd, &fb);
-		igt_pm_restore_sata_link_power_management(pm_data);
-		free(pm_data);
+		igt_pm_restore_sata_link_power_management();
 		close(display.drm_fd);
 	}
 }

tests/i915/i915_pm_rpm.c +3 -21

index 2168ff72..6879c513 100644
@@ -123,8 +123,6 @@ struct modeset_params lpsp_mode_params;
 struct modeset_params non_lpsp_mode_params;
 struct modeset_params *default_mode_params;
 
-static int8_t *pm_data = NULL;
-
 static int modprobe(const char *driver)
 {
 	return igt_kmod_load(driver, NULL);

@@ -755,21 +753,6 @@ static void setup_pc8(void)
 	has_pc8 = true;
 }
 
-static bool dmc_loaded(void)
-{
-	char buf[15];
-	int len;
-
-	len = igt_sysfs_read(debugfs, "i915_dmc_info", buf, sizeof(buf) - 1);
-	if (len < 0)
-	    return true; /* no CSR support, no DMC requirement */
-
-	buf[len] = '\0';
-
-	igt_info("DMC: %s\n", buf);
-	return strstr(buf, "fw loaded: yes");
-}
-
 static void dump_file(int dir, const char *filename)
 {
 	char *contents;

@@ -796,7 +779,7 @@ static bool setup_environment(void)
 
 	init_mode_set_data(&ms_data);
 
-	pm_data = igt_pm_enable_sata_link_power_management();
+	igt_pm_enable_sata_link_power_management();
 
 	has_runtime_pm = igt_setup_runtime_pm();
 	setup_pc8();

@@ -804,7 +787,7 @@ static bool setup_environment(void)
 	igt_info("Runtime PM support: %d\n", has_runtime_pm);
 	igt_info("PC8 residency support: %d\n", has_pc8);
 	igt_require(has_runtime_pm);
-	igt_require(dmc_loaded());
+	igt_require(igt_pm_dmc_loaded(debugfs));
 
 out:
 	disable_all_screens(&ms_data);

@@ -821,8 +804,7 @@ static void teardown_environment(void)
 
 	igt_restore_runtime_pm();
 
-	igt_pm_restore_sata_link_power_management(pm_data);
-	free(pm_data);
+	igt_pm_restore_sata_link_power_management();
 
 	fini_mode_set_data(&ms_data);
 

Signature · 1 line

2.21.0

As DC6 requires platform to enter PC8 package C state. It make sense to skip the DC6 igt-test, if BIOS configuration has disabled PC8+ package C states.

Signed-off-by Anshuman Gupta <[email protected]>

---
 tests/i915/i915_pm_dc.c | 55 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 55 insertions(+)

tests/i915/i915_pm_dc.c +33 -0

index 4c7e152a..0b29599b 100644
@@ -26,19 +26,35 @@
 #include "igt_sysfs.h"
 #include "igt_psr.h"
 #include <errno.h>
+#include <fcntl.h>
 #include <stdbool.h>
 #include <stdio.h>
 #include <string.h>
 #include "intel_bufmgr.h"
 #include "intel_io.h"
 #include "limits.h"
+#include "igt_kmod.h"
 
 /* DC State Flags */
 #define CHECK_DC5	1
 #define CHECK_DC6	2
 
+#define MSR_PKG_CST_CONFIG_CONTROL	0xE2
+/*
+ * Below PKG CST limit mask and PC8 bits are meant for
+ * HSW,BDW SKL,ICL and Goldmont Microarch and future platforms.
+ * Refer IA S/W developers manual vol3c part3 chapter:35
+ */
+#define  PKG_CST_LIMIT_MASK		0xF
+#define  PKG_CST_LIMIT_C8		0x6
+
+#define MSR_PC8_RES	0x630
+#define MSR_PC9_RES	0x631
+#define MSR_PC10_RES	0x632
+
 typedef struct {
 	int drm_fd;
+	int msr_fd;
 	int debugfs_fd;
 	uint32_t devid;
 	igt_display_t display;

@@ -52,6 +68,34 @@ typedef struct {
 static bool dc_state_wait_entry(int drm_fd, int dc_flag, int prev_dc_count);
 static void check_dc_counter(int drm_fd, int dc_flag, uint32_t prev_dc_count);
 
+/* If the read fails, then the machine doesn't support PC8+ residencies. */
+static bool supports_pc8_plus_residencies(data_t *data)
+{
+	int rc;
+	uint64_t val;
+	int msr_fd = data->msr_fd;
+
+	rc = pread(msr_fd, &val, sizeof(uint64_t), MSR_PC8_RES);
+	if (rc != sizeof(val))
+		return false;
+	rc = pread(msr_fd, &val, sizeof(uint64_t), MSR_PC9_RES);
+	if (rc != sizeof(val))
+		return false;
+	rc = pread(msr_fd, &val, sizeof(uint64_t), MSR_PC10_RES);
+	if (rc != sizeof(val))
+		return false;
+

tests/i915/i915_pm_dc.c +12 -0

+
 static void setup_output(data_t *data)
 {
 	igt_display_t *display = &data->display;

@@ -255,6 +299,12 @@ int main(int argc, char *argv[])
 		igt_require(has_runtime_pm);
 		igt_require(igt_pm_dmc_loaded(data.debugfs_fd));
 		igt_display_require(&data.display, data.drm_fd);
+		/* Make sure our Kernel supports MSR and the module is loaded */
+		igt_require(igt_kmod_load("msr", NULL) == 0);
+
+		data.msr_fd = open("/dev/cpu/0/msr", O_RDONLY);
+		igt_assert_f(data.msr_fd >= 0,
+			     "Can't open /dev/cpu/0/msr.\n");
 	}
 
 	igt_subtest("dc5-psr") {

@@ -270,6 +320,8 @@ int main(int argc, char *argv[])
 		psr_enable(data.debugfs_fd, data.op_psr_mode);
 		igt_require_f(edp_psr_sink_support(&data),
 			      "Sink does not support PSR\n");
+		igt_require_f(supports_pc8_plus_residencies(&data),
+			      "PC8+ residencies not supported\n");
 		test_dc_state_psr(&data, CHECK_DC6);
 	}
 

@@ -278,11 +330,14 @@ int main(int argc, char *argv[])
 	}
 
 	igt_subtest("dc6-dpms") {
+		igt_require_f(supports_pc8_plus_residencies(&data),
+			      "PC8+ residencies not supported\n");
 		test_dc_state_dpms(&data, CHECK_DC6);
 	}
 
 	igt_fixture {
 		close(data.debugfs_fd);
+		close(data.msr_fd);
 		display_fini(&data);
 	}
 

Signature · 1 line

2.21.0

Quoted 75 lines · Anshuman Gupta

As DC6 requires platform to enter PC8 package C state. It make sense to skip the DC6 igt-test, if BIOS configuration has disabled PC8+ package C states.

Signed-off-by Anshuman Gupta <[email protected]>

---
 tests/i915/i915_pm_dc.c | 55 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 55 insertions(+)

tests/i915/i915_pm_dc.c +38 -0

index 4c7e152a..0b29599b 100644
@@ -26,19 +26,35 @@
 #include "igt_sysfs.h"
 #include "igt_psr.h"
 #include <errno.h>
+#include <fcntl.h>
 #include <stdbool.h>
 #include <stdio.h>
 #include <string.h>
 #include "intel_bufmgr.h"
 #include "intel_io.h"
 #include "limits.h"
+#include "igt_kmod.h"
 
 /* DC State Flags */
 #define CHECK_DC5	1
 #define CHECK_DC6	2
 
+#define MSR_PKG_CST_CONFIG_CONTROL	0xE2
+/*
+ * Below PKG CST limit mask and PC8 bits are meant for
+ * HSW,BDW SKL,ICL and Goldmont Microarch and future platforms.
+ * Refer IA S/W developers manual vol3c part3 chapter:35
+ */
+#define  PKG_CST_LIMIT_MASK		0xF
+#define  PKG_CST_LIMIT_C8		0x6
+
+#define MSR_PC8_RES	0x630
+#define MSR_PC9_RES	0x631
+#define MSR_PC10_RES	0x632
+
 typedef struct {
 	int drm_fd;
+	int msr_fd;
 	int debugfs_fd;
 	uint32_t devid;
 	igt_display_t display;

@@ -52,6 +68,34 @@ typedef struct {
 static bool dc_state_wait_entry(int drm_fd, int dc_flag, int prev_dc_count);
 static void check_dc_counter(int drm_fd, int dc_flag, uint32_t prev_dc_count);
 
+/* If the read fails, then the machine doesn't support PC8+ residencies. */
+static bool supports_pc8_plus_residencies(data_t *data)
+{
+	int rc;
+	uint64_t val;
+	int msr_fd = data->msr_fd;
+
+	rc = pread(msr_fd, &val, sizeof(uint64_t), MSR_PC8_RES);
+	if (rc != sizeof(val))
+		return false;
+	rc = pread(msr_fd, &val, sizeof(uint64_t), MSR_PC9_RES);
+	if (rc != sizeof(val))
+		return false;
+	rc = pread(msr_fd, &val, sizeof(uint64_t), MSR_PC10_RES);
+	if (rc != sizeof(val))
+		return false;
+
+	rc = pread(msr_fd, &val, sizeof(uint64_t), MSR_PKG_CST_CONFIG_CONTROL);
+	if (rc != sizeof(val))
+		return false;
+	if ((val & PKG_CST_LIMIT_MASK) < PKG_CST_LIMIT_C8) {
+		igt_info("PKG C-states limited below PC8 by the BIOS\n");

tests/i915/i915_pm_dc.c typedef struct { · line 97

Quoted 5 lines

tests/i915/i915_pm_dc.c +5 -0

+		return false;
+	}
+
+	return true;
+}

I missed it last time, but this is a copy/paste from i915_pm_rpm, so please factor it out instead into a lib function.

Quoted 42 lines

tests/i915/i915_pm_dc.c +12 -0

+
 static void setup_output(data_t *data)
 {
 	igt_display_t *display = &data->display;

@@ -255,6 +299,12 @@ int main(int argc, char *argv[])
 		igt_require(has_runtime_pm);
 		igt_require(igt_pm_dmc_loaded(data.debugfs_fd));
 		igt_display_require(&data.display, data.drm_fd);
+		/* Make sure our Kernel supports MSR and the module is loaded */
+		igt_require(igt_kmod_load("msr", NULL) == 0);
+
+		data.msr_fd = open("/dev/cpu/0/msr", O_RDONLY);
+		igt_assert_f(data.msr_fd >= 0,
+			     "Can't open /dev/cpu/0/msr.\n");
 	}
 
 	igt_subtest("dc5-psr") {

@@ -270,6 +320,8 @@ int main(int argc, char *argv[])
 		psr_enable(data.debugfs_fd, data.op_psr_mode);
 		igt_require_f(edp_psr_sink_support(&data),
 			      "Sink does not support PSR\n");
+		igt_require_f(supports_pc8_plus_residencies(&data),
+			      "PC8+ residencies not supported\n");
 		test_dc_state_psr(&data, CHECK_DC6);
 	}
 

@@ -278,11 +330,14 @@ int main(int argc, char *argv[])
 	}
 
 	igt_subtest("dc6-dpms") {
+		igt_require_f(supports_pc8_plus_residencies(&data),
+			      "PC8+ residencies not supported\n");
 		test_dc_state_dpms(&data, CHECK_DC6);
 	}
 
 	igt_fixture {
 		close(data.debugfs_fd);
+		close(data.msr_fd);
 		display_fini(&data);
 	}
 

Quoted 3 lines

Signature · 1 line

2.21.0

From: Jyoti Yadav <[email protected]>

Currently this test validates DC5 upon PSR entry for supported platforms. Added new file for compilation inside Makefile and Meson.

v2: Used the debugfs entry for DC counters instead of Registers.
Used shorter names for variables.
Introduced timeout to read DC counters.
v3: one second timeout is introduced to read DC counters.
Skip the subtest if counters are not available for that platform.
v4: Rebased, to fix compilation error in psr_enable(), psr_wait_entry()
and replaced igt_display_init() by igt_display_require() in pm_rpm.c. Addressed the review comment by removing unused function display_init, removing redundant igt commit suggested by Imre.
Fixed typo in read_dc_counter().
v5: Addressed the review comment by removing redundant read_dc_counter(),
clubbed cleanup() function in test_dc_state_psr() suggested by Imre. Rearranged preprocessor directives at one place.
Fixed compilation warning by adding function prototype for dc_state_wait_entry() and check_dc_counter().
Listing actual change in patch set changelog to make review easier.
v6: Fixed "i915_edp_psr_status" string to "Sink support: yes".
v7: Rebased since test name changed from "pm_dc" to "i915_pm_dc",
this will align with other PM tests.
also changed the DC5/6 counter check timeout to 3 second.
v8: On few platform SATA i/p is blocking deeper package C states.
used igt_pm_enable_sata_link_power_management() function in order to use min_power policy.
v9: Removed redundant igt_pm_remove_sata_link_power_management()
as sata link policy values will be restored by exit handler.
v10: changed cleanup() to cleanup_dc_psr() symmetric to cleanup_dc_dpms().

Signed-off-by Jyoti Yadav <[email protected]>

Signed-off-by Anshuman Gupta <[email protected]>

---
 tests/Makefile.sources  |   3 +
 tests/i915/i915_pm_dc.c | 211 ++++++++++++++++++++++++++++++++++++++++
 tests/meson.build       |   1 +
 3 files changed, 215 insertions(+)
 create mode 100644 tests/i915/i915_pm_dc.c

tests/Makefile.sources +3 -0

index c02e4d94..ebaf75f8 100644
@@ -507,6 +507,9 @@ i915_pm_rc6_residency_SOURCES = i915/i915_pm_rc6_residency.c
 TESTS_progs += i915_pm_rpm
 i915_pm_rpm_SOURCES = i915/i915_pm_rpm.c
 
+TESTS_progs += i915_pm_dc
+i915_pm_dc_SOURCES = i915/i915_pm_dc.c
+
 TESTS_progs += i915_pm_rps
 i915_pm_rps_SOURCES = i915/i915_pm_rps.c
 

tests/i915/i915_pm_dc.c new file +23 -0

new file mode 100644
index 00000000..10e4efbd
@@ -0,0 +1,211 @@
+/*
+ * Copyright © 2018 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ */

tests/i915/i915_pm_dc.c new file +178 -0

+#include "limits.h"
+
+/* DC State Flags */
+#define CHECK_DC5	1
+#define CHECK_DC6	2
+
+typedef struct {
+	int drm_fd;
+	int debugfs_fd;
+	uint32_t devid;
+	igt_display_t display;
+	struct igt_fb fb_white;
+	enum psr_mode op_psr_mode;
+	drmModeModeInfo *mode;
+	igt_output_t *output;
+} data_t;
+
+static bool dc_state_wait_entry(int drm_fd, int dc_flag, int prev_dc_count);
+static void check_dc_counter(int drm_fd, int dc_flag, uint32_t prev_dc_count);
+
+static void setup_output(data_t *data)
+{
+	igt_display_t *display = &data->display;
+	igt_output_t *output;
+	enum pipe pipe;
+
+	for_each_pipe_with_valid_output(display, pipe, output) {
+		drmModeConnectorPtr c = output->config.connector;
+
+		if (c->connector_type != DRM_MODE_CONNECTOR_eDP)
+			continue;
+
+		igt_output_set_pipe(output, pipe);
+		data->output = output;
+		data->mode = igt_output_get_mode(output);
+
+		return;
+	}
+}
+
+static void display_fini(data_t *data)
+{
+	igt_display_fini(&data->display);
+}
+
+static bool edp_psr_sink_support(data_t *data)
+{
+	char buf[512];
+
+	igt_debugfs_simple_read(data->debugfs_fd, "i915_edp_psr_status",
+				buf, sizeof(buf));
+
+	return strstr(buf, "Sink support: yes");
+}
+
+static void cleanup_dc_psr(data_t *data)
+{
+	igt_plane_t *primary;
+
+	primary = igt_output_get_plane_type(data->output,
+					    DRM_PLANE_TYPE_PRIMARY);
+	igt_plane_set_fb(primary, NULL);
+	igt_display_commit(&data->display);
+	igt_remove_fb(data->drm_fd, &data->fb_white);
+}
+
+static void setup_primary(data_t *data)
+{
+	igt_plane_t *primary;
+
+	primary = igt_output_get_plane_type(data->output,
+					    DRM_PLANE_TYPE_PRIMARY);
+	igt_plane_set_fb(primary, NULL);
+	igt_create_color_fb(data->drm_fd,
+			    data->mode->hdisplay, data->mode->vdisplay,
+			    DRM_FORMAT_XRGB8888,
+			    LOCAL_I915_FORMAT_MOD_X_TILED,
+			    1.0, 1.0, 1.0,
+			    &data->fb_white);
+	igt_plane_set_fb(primary, &data->fb_white);
+	igt_display_commit(&data->display);
+}
+
+static uint32_t get_dc_counter(char *dc_data)
+{
+	char *e;
+	long ret;
+	char *s = strchr(dc_data, ':');
+
+	assert(s);
+	s++;
+	ret = strtol(s, &e, 10);
+	assert(((ret != LONG_MIN && ret != LONG_MAX) || errno != ERANGE) &&
+	       e > s && *e == '\n' && ret >= 0);
+	return ret;
+}
+
+static uint32_t read_dc_counter(uint32_t drm_fd, int dc_flag)
+{
+	char buf[4096];
+	char *str;
+
+	igt_debugfs_read(drm_fd, "i915_dmc_info", buf);
+
+	if (dc_flag & CHECK_DC5)
+		str = strstr(buf, "DC3 -> DC5 count");
+	else if (dc_flag & CHECK_DC6)
+		str = strstr(buf, "DC5 -> DC6 count");
+
+	/* Check DC5/DC6 counter is available for the platform.
+	 * Skip the test if counter is not available.
+	 */
+	igt_skip_on_f(!str, "DC%d counter is not available\n",
+		      dc_flag & CHECK_DC5 ? 5 : 6);
+	return get_dc_counter(str);
+}
+
+static bool dc_state_wait_entry(int drm_fd, int dc_flag, int prev_dc_count)
+{
+	return igt_wait(read_dc_counter(drm_fd, dc_flag) >
+			prev_dc_count, 3000, 100);
+}
+
+static void check_dc_counter(int drm_fd, int dc_flag, uint32_t prev_dc_count)
+{
+	igt_assert_f(dc_state_wait_entry(drm_fd, dc_flag, prev_dc_count),
+		     "DC%d state is not achieved\n",
+		     dc_flag & CHECK_DC5 ? 5 : 6);
+}
+
+static void test_dc_state_psr(data_t *data, int dc_flag)
+{
+	uint32_t dc_counter_before_psr;
+
+	dc_counter_before_psr = read_dc_counter(data->drm_fd, dc_flag);
+	setup_output(data);
+	setup_primary(data);
+	igt_assert(psr_wait_entry(data->debugfs_fd, data->op_psr_mode));
+	check_dc_counter(data->drm_fd, dc_flag, dc_counter_before_psr);
+	cleanup_dc_psr(data);
+}
+
+int main(int argc, char *argv[])
+{
+	bool has_runtime_pm;
+	data_t data = {};
+
+	igt_skip_on_simulation();
+	igt_subtest_init(argc, argv);
+	igt_fixture {
+		data.drm_fd = drm_open_driver_master(DRIVER_INTEL);
+		data.debugfs_fd = igt_debugfs_dir(data.drm_fd);
+		igt_require(data.debugfs_fd != -1);
+		kmstest_set_vt_graphics_mode();
+		data.devid = intel_get_drm_devid(data.drm_fd);
+		igt_pm_enable_sata_link_power_management();
+		has_runtime_pm = igt_setup_runtime_pm();
+		igt_info("Runtime PM support: %d\n", has_runtime_pm);
+		igt_require(has_runtime_pm);
+		igt_require(igt_pm_dmc_loaded(data.debugfs_fd));
+		igt_display_require(&data.display, data.drm_fd);
+	}
+
+	igt_subtest("dc5-psr") {
+		data.op_psr_mode = PSR_MODE_1;
+		psr_enable(data.debugfs_fd, data.op_psr_mode);
+		igt_require_f(edp_psr_sink_support(&data),
+			      "Sink does not support PSR\n");
+		test_dc_state_psr(&data, CHECK_DC5);
+	}
+
+	igt_fixture {
+		close(data.debugfs_fd);
+		display_fini(&data);
+	}
+
+	igt_exit();
+}

tests/meson.build +1 -0

index a7b2b322..f85deba1 100644
@@ -230,6 +230,7 @@ i915_progs = [
 	'i915_pm_lpsp',
 	'i915_pm_rc6_residency',
 	'i915_pm_rpm',
+	'i915_pm_dc',
 	'i915_pm_rps',
 	'i915_pm_sseu',
 	'i915_query',

Signature · 1 line

2.21.0