Skip to contentSkip to conversation

amlogic: Add Khadas VIM3 support

PATCH Superseded Andreas Färber 2 participants 10 messages Sep 2, 2019

Subsystems (5)

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore
#0 lore raw

cover amlogic: Add Khadas VIM3 support

Hi,

This mini-series adds initial support for Amlogic A311D based Khadas VIM3.

Regards,
Andreas

Cc Neil Armstrong <[email protected]>

Andreas Färber (2):
arm: dts: Import and update DT for Khadas VIM3
configs: Add Khadas VIM3 defconfig

 arch/arm/dts/Makefile                              |    3 +-
 arch/arm/dts/meson-g12-common.dtsi                 | 2435 ++++++++++++++++++++
 arch/arm/dts/meson-g12b-a311d-khadas-vim3.dts      |   15 +
 arch/arm/dts/meson-g12b-a311d.dtsi                 |  149 ++
 arch/arm/dts/meson-g12b-khadas-vim3.dtsi           |  544 +++++
 arch/arm/dts/meson-g12b.dtsi                       |   39 +-
 board/amlogic/w400/MAINTAINERS                     |    1 +
 board/amlogic/w400/README.khadas-vim3              |  132 ++
 configs/khadas-vim3_defconfig                      |   54 +
 include/dt-bindings/clock/g12a-clkc.h              |    6 +
 include/dt-bindings/power/meson-g12a-power.h       |   13 +
 .../reset/amlogic,meson-g12a-audio-reset.h         |   38 +
 12 files changed, 3425 insertions(+), 4 deletions(-)
 create mode 100644 arch/arm/dts/meson-g12-common.dtsi
 create mode 100644 arch/arm/dts/meson-g12b-a311d-khadas-vim3.dts
 create mode 100644 arch/arm/dts/meson-g12b-a311d.dtsi
 create mode 100644 arch/arm/dts/meson-g12b-khadas-vim3.dtsi
 create mode 100644 board/amlogic/w400/README.khadas-vim3
 create mode 100644 configs/khadas-vim3_defconfig
 create mode 100644 include/dt-bindings/power/meson-g12a-power.h
 create mode 100644 include/dt-bindings/reset/amlogic,meson-g12a-audio-reset.h
Signature · 1 line
2.16.4
#1 lore raw

PATCH 1/2 arm: dts: Import and update DT for Khadas VIM3

In Linux meson-g12-common.dtsi was introduced as well as new g12b nodes and headers, as dependencies of new meson-g12b-a311d-khadas-vim3.dts.

---
 arch/arm/dts/Makefile                              |    3 +-
 arch/arm/dts/meson-g12-common.dtsi                 | 2435 ++++++++++++++++++++
 arch/arm/dts/meson-g12b-a311d-khadas-vim3.dts      |   15 +
 arch/arm/dts/meson-g12b-a311d.dtsi                 |  149 ++
 arch/arm/dts/meson-g12b-khadas-vim3.dtsi           |  544 +++++
 arch/arm/dts/meson-g12b.dtsi                       |   39 +-
 include/dt-bindings/clock/g12a-clkc.h              |    6 +
 include/dt-bindings/power/meson-g12a-power.h       |   13 +
 .../reset/amlogic,meson-g12a-audio-reset.h         |   38 +
 9 files changed, 3238 insertions(+), 4 deletions(-)
 create mode 100644 arch/arm/dts/meson-g12-common.dtsi
 create mode 100644 arch/arm/dts/meson-g12b-a311d-khadas-vim3.dts
 create mode 100644 arch/arm/dts/meson-g12b-a311d.dtsi
 create mode 100644 arch/arm/dts/meson-g12b-khadas-vim3.dtsi
 create mode 100644 include/dt-bindings/power/meson-g12a-power.h
 create mode 100644 include/dt-bindings/reset/amlogic,meson-g12a-audio-reset.h
arch/arm/dts/Makefile +2 -1
index aac1b83d49..6de5e4c62a 100644
@@ -141,7 +141,8 @@ dtb-$(CONFIG_ARCH_MESON) += \
 	meson-axg-s400.dtb \
 	meson-g12a-u200.dtb \
 	meson-g12a-sei510.dtb \
-	meson-g12b-odroid-n2.dtb
+	meson-g12b-odroid-n2.dtb \
+	meson-g12b-a311d-khadas-vim3.dtb
 dtb-$(CONFIG_TEGRA) += tegra20-harmony.dtb \
 	tegra20-medcom-wide.dtb \
 	tegra20-paz00.dtb \
arch/arm/dts/meson-g12-common.dtsi new file +2435 -0

2,435 lines not on this page · raw message

arch/arm/dts/meson-g12b-a311d-khadas-vim3.dts new file +15 -0
new file mode 100644
index 0000000000..73128ed243
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <[email protected]>
+ * Copyright (c) 2019 Christian Hewitt <[email protected]>
+ */
+
+/dts-v1/;
+
+#include "meson-g12b-a311d.dtsi"
+#include "meson-g12b-khadas-vim3.dtsi"
+
+/ {
+	compatible = "khadas,vim3", "amlogic,a311d", "amlogic,g12b";
+};
arch/arm/dts/meson-g12b-a311d.dtsi new file +149 -0

149 lines not on this page · raw message

arch/arm/dts/meson-g12b-khadas-vim3.dtsi new file +544 -0

392 lines not on this page · raw message

arch/arm/dts/meson-g12b.dtsi +36 -3
index 9e88e513b2..5628ccd545 100644

Lines of this file are not shown. View the raw message.

include/dt-bindings/clock/g12a-clkc.h +6 -0
index b6b127e456..0837c1a7ae 100644

Lines of this file are not shown. View the raw message.

include/dt-bindings/power/meson-g12a-power.h new file +13 -0
new file mode 100644
index 0000000000..bb5e67a842

Lines of this file are not shown. View the raw message.

include/dt-bindings/reset/amlogic,meson-g12a-audio-reset.h new file +38 -0
new file mode 100644
index 0000000000..14b78dabed

Lines of this file are not shown. View the raw message.

The rest of this diff is not shown. View the raw message.

Signature · 1 line
2.16.4

Part of the diff is not shown here. View the raw message.

#2 lore raw

PATCH 1/2 arm: dts: Import and update DT for Khadas VIM3

Hi Andreas,

Quoted 2 lines · Andreas Färber

In Linux meson-g12-common.dtsi was introduced as well as new g12b nodes and headers, as dependencies of new meson-g12b-a311d-khadas-vim3.dts.

Can you precise the Linux commit ID you sync'ed from ? The best would be to sync from the v2 dt64 PR from kevin :
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic.git/tag/?h=amlogic-dt64-2.1

Thanks,
Neil

Quoted 6 lines
---
 arch/arm/dts/Makefile                              |    3 +-
 arch/arm/dts/meson-g12-common.dtsi                 | 2435 ++++++++++++++++++++
 arch/arm/dts/meson-g12b-a311d-khadas-vim3.dts      |   15 +

Can you also sync the s922x version ?

Quoted 19 lines
 arch/arm/dts/meson-g12b-a311d.dtsi                 |  149 ++
 arch/arm/dts/meson-g12b-khadas-vim3.dtsi           |  544 +++++
 arch/arm/dts/meson-g12b.dtsi                       |   39 +-
 include/dt-bindings/clock/g12a-clkc.h              |    6 +
 include/dt-bindings/power/meson-g12a-power.h       |   13 +
 .../reset/amlogic,meson-g12a-audio-reset.h         |   38 +
 9 files changed, 3238 insertions(+), 4 deletions(-)
 create mode 100644 arch/arm/dts/meson-g12-common.dtsi
 create mode 100644 arch/arm/dts/meson-g12b-a311d-khadas-vim3.dts
 create mode 100644 arch/arm/dts/meson-g12b-a311d.dtsi
 create mode 100644 arch/arm/dts/meson-g12b-khadas-vim3.dtsi
 create mode 100644 include/dt-bindings/power/meson-g12a-power.h
 create mode 100644 include/dt-bindings/reset/amlogic,meson-g12a-audio-reset.h
arch/arm/dts/Makefile +0 -0
index aac1b83d49..6de5e4c62a 100644

arch/arm/dts/Makefile dtb-$(CONFIG_ARCH_MESON) += \ · line 145

Quoted 6 lines
arch/arm/dts/Makefile +2 -1
@@ -141,7 +141,8 @@ dtb-$(CONFIG_ARCH_MESON) += \
 	meson-axg-s400.dtb \
 	meson-g12a-u200.dtb \
 	meson-g12a-sei510.dtb \
-	meson-g12b-odroid-n2.dtb
+	meson-g12b-odroid-n2.dtb \
+	meson-g12b-a311d-khadas-vim3.dtb

Same here, can you also build the s922x variant ?

Quoted 3,322 lines
arch/arm/dts/Makefile +0 -0
 dtb-$(CONFIG_TEGRA) += tegra20-harmony.dtb \
 	tegra20-medcom-wide.dtb \
 	tegra20-paz00.dtb \
arch/arm/dts/meson-g12-common.dtsi new file +2435 -0
new file mode 100644
index 0000000000..3f39e020f7
@@ -0,0 +1,2435 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Amlogic, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/axg-audio-clkc.h>
+#include <dt-bindings/clock/g12a-clkc.h>
+#include <dt-bindings/clock/g12a-aoclkc.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/amlogic,meson-axg-audio-arb.h>
+#include <dt-bindings/reset/amlogic,meson-g12a-audio-reset.h>
+#include <dt-bindings/reset/amlogic,meson-g12a-reset.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	tdmif_a: audio-controller-0 {
+		compatible = "amlogic,axg-tdm-iface";
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "TDM_A";
+		clocks = <&clkc_audio AUD_CLKID_MST_A_MCLK>,
+			 <&clkc_audio AUD_CLKID_MST_A_SCLK>,
+			 <&clkc_audio AUD_CLKID_MST_A_LRCLK>;
+		clock-names = "mclk", "sclk", "lrclk";
+		status = "disabled";
+	};
+
+	tdmif_b: audio-controller-1 {
+		compatible = "amlogic,axg-tdm-iface";
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "TDM_B";
+		clocks = <&clkc_audio AUD_CLKID_MST_B_MCLK>,
+			 <&clkc_audio AUD_CLKID_MST_B_SCLK>,
+			 <&clkc_audio AUD_CLKID_MST_B_LRCLK>;
+		clock-names = "mclk", "sclk", "lrclk";
+		status = "disabled";
+	};
+
+	tdmif_c: audio-controller-2 {
+		compatible = "amlogic,axg-tdm-iface";
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "TDM_C";
+		clocks = <&clkc_audio AUD_CLKID_MST_C_MCLK>,
+			 <&clkc_audio AUD_CLKID_MST_C_SCLK>,
+			 <&clkc_audio AUD_CLKID_MST_C_LRCLK>;
+		clock-names = "mclk", "sclk", "lrclk";
+		status = "disabled";
+	};
+
+	efuse: efuse {
+		compatible = "amlogic,meson-gxbb-efuse";
+		clocks = <&clkc CLKID_EFUSE>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		read-only;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* 3 MiB reserved for ARM Trusted Firmware (BL31) */
+		secmon_reserved: secmon at 5000000 {
+			reg = <0x0 0x05000000 0x0 0x300000>;
+			no-map;
+		};
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0x0 0x10000000>;
+			alignment = <0x0 0x400000>;
+			linux,cma-default;
+		};
+	};
+
+	sm: secure-monitor {
+		compatible = "amlogic,meson-gxbb-sm";
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ethmac: ethernet at ff3f0000 {
+			compatible = "amlogic,meson-axg-dwmac",
+				     "snps,dwmac-3.70a",
+				     "snps,dwmac";
+			reg = <0x0 0xff3f0000 0x0 0x10000>,
+			      <0x0 0xff634540 0x0 0x8>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			clocks = <&clkc CLKID_ETH>,
+				 <&clkc CLKID_FCLK_DIV2>,
+				 <&clkc CLKID_MPLL2>;
+			clock-names = "stmmaceth", "clkin0", "clkin1";
+			rx-fifo-depth = <4096>;
+			tx-fifo-depth = <2048>;
+			status = "disabled";
+
+			mdio0: mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,dwmac-mdio";
+			};
+		};
+
+		apb: bus at ff600000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xff600000 0x0 0x200000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xff600000 0x0 0x200000>;
+
+			hdmi_tx: hdmi-tx at 0 {
+				compatible = "amlogic,meson-g12a-dw-hdmi";
+				reg = <0x0 0x0 0x0 0x10000>;
+				interrupts = <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>;
+				resets = <&reset RESET_HDMITX_CAPB3>,
+					 <&reset RESET_HDMITX_PHY>,
+					 <&reset RESET_HDMITX>;
+				reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy";
+				clocks = <&clkc CLKID_HDMI>,
+					 <&clkc CLKID_HTX_PCLK>,
+					 <&clkc CLKID_VPU_INTR>;
+				clock-names = "isfr", "iahb", "venci";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#sound-dai-cells = <0>;
+				status = "disabled";
+
+				/* VPU VENC Input */
+				hdmi_tx_venc_port: port at 0 {
+					reg = <0>;
+
+					hdmi_tx_in: endpoint {
+						remote-endpoint = <&hdmi_tx_out>;
+					};
+				};
+
+				/* TMDS Output */
+				hdmi_tx_tmds_port: port at 1 {
+					reg = <1>;
+				};
+			};
+
+			apb_efuse: bus at 30000 {
+				compatible = "simple-bus";
+				reg = <0x0 0x30000 0x0 0x2000>;
+				#address-cells = <2>;
+				#size-cells = <2>;
+				ranges = <0x0 0x0 0x0 0x30000 0x0 0x2000>;
+
+				hwrng: rng at 218 {
+					compatible = "amlogic,meson-rng";
+					reg = <0x0 0x218 0x0 0x4>;
+				};
+			};
+
+			periphs: bus at 34400 {
+				compatible = "simple-bus";
+				reg = <0x0 0x34400 0x0 0x400>;
+				#address-cells = <2>;
+				#size-cells = <2>;
+				ranges = <0x0 0x0 0x0 0x34400 0x0 0x400>;
+
+				periphs_pinctrl: pinctrl at 40 {
+					compatible = "amlogic,meson-g12a-periphs-pinctrl";
+					#address-cells = <2>;
+					#size-cells = <2>;
+					ranges;
+
+					gpio: bank at 40 {
+						reg = <0x0 0x40  0x0 0x4c>,
+						      <0x0 0xe8  0x0 0x18>,
+						      <0x0 0x120 0x0 0x18>,
+						      <0x0 0x2c0 0x0 0x40>,
+						      <0x0 0x340 0x0 0x1c>;
+						reg-names = "gpio",
+							    "pull",
+							    "pull-enable",
+							    "mux",
+							    "ds";
+						gpio-controller;
+						#gpio-cells = <2>;
+						gpio-ranges = <&periphs_pinctrl 0 0 86>;
+					};
+
+					cec_ao_a_h_pins: cec_ao_a_h {
+						mux {
+							groups = "cec_ao_a_h";
+							function = "cec_ao_a_h";
+							bias-disable;
+						};
+					};
+
+					cec_ao_b_h_pins: cec_ao_b_h {
+						mux {
+							groups = "cec_ao_b_h";
+							function = "cec_ao_b_h";
+							bias-disable;
+						};
+					};
+
+					emmc_pins: emmc {
+						mux-0 {
+							groups = "emmc_nand_d0",
+								 "emmc_nand_d1",
+								 "emmc_nand_d2",
+								 "emmc_nand_d3",
+								 "emmc_nand_d4",
+								 "emmc_nand_d5",
+								 "emmc_nand_d6",
+								 "emmc_nand_d7",
+								 "emmc_cmd";
+							function = "emmc";
+							bias-pull-up;
+							drive-strength-microamp = <4000>;
+						};
+
+						mux-1 {
+							groups = "emmc_clk";
+							function = "emmc";
+							bias-disable;
+							drive-strength-microamp = <4000>;
+						};
+					};
+
+					emmc_ds_pins: emmc-ds {
+						mux {
+							groups = "emmc_nand_ds";
+							function = "emmc";
+							bias-pull-down;
+							drive-strength-microamp = <4000>;
+						};
+					};
+
+					emmc_clk_gate_pins: emmc_clk_gate {
+						mux {
+							groups = "BOOT_8";
+							function = "gpio_periphs";
+							bias-pull-down;
+							drive-strength-microamp = <4000>;
+						};
+					};
+
+					hdmitx_ddc_pins: hdmitx_ddc {
+						mux {
+							groups = "hdmitx_sda",
+								 "hdmitx_sck";
+							function = "hdmitx";
+							bias-disable;
+							drive-strength-microamp = <4000>;
+						};
+					};
+
+					hdmitx_hpd_pins: hdmitx_hpd {
+						mux {
+							groups = "hdmitx_hpd_in";
+							function = "hdmitx";
+							bias-disable;
+						};
+					};
+
+
+					i2c0_sda_c_pins: i2c0-sda-c {
+						mux {
+							groups = "i2c0_sda_c";
+							function = "i2c0";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+
+						};
+					};
+
+					i2c0_sck_c_pins: i2c0-sck-c {
+						mux {
+							groups = "i2c0_sck_c";
+							function = "i2c0";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c0_sda_z0_pins: i2c0-sda-z0 {
+						mux {
+							groups = "i2c0_sda_z0";
+							function = "i2c0";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c0_sck_z1_pins: i2c0-sck-z1 {
+						mux {
+							groups = "i2c0_sck_z1";
+							function = "i2c0";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c0_sda_z7_pins: i2c0-sda-z7 {
+						mux {
+							groups = "i2c0_sda_z7";
+							function = "i2c0";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c0_sda_z8_pins: i2c0-sda-z8 {
+						mux {
+							groups = "i2c0_sda_z8";
+							function = "i2c0";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c1_sda_x_pins: i2c1-sda-x {
+						mux {
+							groups = "i2c1_sda_x";
+							function = "i2c1";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c1_sck_x_pins: i2c1-sck-x {
+						mux {
+							groups = "i2c1_sck_x";
+							function = "i2c1";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c1_sda_h2_pins: i2c1-sda-h2 {
+						mux {
+							groups = "i2c1_sda_h2";
+							function = "i2c1";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c1_sck_h3_pins: i2c1-sck-h3 {
+						mux {
+							groups = "i2c1_sck_h3";
+							function = "i2c1";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c1_sda_h6_pins: i2c1-sda-h6 {
+						mux {
+							groups = "i2c1_sda_h6";
+							function = "i2c1";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c1_sck_h7_pins: i2c1-sck-h7 {
+						mux {
+							groups = "i2c1_sck_h7";
+							function = "i2c1";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c2_sda_x_pins: i2c2-sda-x {
+						mux {
+							groups = "i2c2_sda_x";
+							function = "i2c2";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c2_sck_x_pins: i2c2-sck-x {
+						mux {
+							groups = "i2c2_sck_x";
+							function = "i2c2";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c2_sda_z_pins: i2c2-sda-z {
+						mux {
+							groups = "i2c2_sda_z";
+							function = "i2c2";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c2_sck_z_pins: i2c2-sck-z {
+						mux {
+							groups = "i2c2_sck_z";
+							function = "i2c2";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c3_sda_h_pins: i2c3-sda-h {
+						mux {
+							groups = "i2c3_sda_h";
+							function = "i2c3";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c3_sck_h_pins: i2c3-sck-h {
+						mux {
+							groups = "i2c3_sck_h";
+							function = "i2c3";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c3_sda_a_pins: i2c3-sda-a {
+						mux {
+							groups = "i2c3_sda_a";
+							function = "i2c3";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c3_sck_a_pins: i2c3-sck-a {
+						mux {
+							groups = "i2c3_sck_a";
+							function = "i2c3";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					mclk0_a_pins: mclk0-a {
+						mux {
+							groups = "mclk0_a";
+							function = "mclk0";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					mclk1_a_pins: mclk1-a {
+						mux {
+							groups = "mclk1_a";
+							function = "mclk1";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					mclk1_x_pins: mclk1-x {
+						mux {
+							groups = "mclk1_x";
+							function = "mclk1";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					mclk1_z_pins: mclk1-z {
+						mux {
+							groups = "mclk1_z";
+							function = "mclk1";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					pdm_din0_a_pins: pdm-din0-a {
+						mux {
+							groups = "pdm_din0_a";
+							function = "pdm";
+							bias-disable;
+						};
+					};
+
+					pdm_din0_c_pins: pdm-din0-c {
+						mux {
+							groups = "pdm_din0_c";
+							function = "pdm";
+							bias-disable;
+						};
+					};
+
+					pdm_din0_x_pins: pdm-din0-x {
+						mux {
+							groups = "pdm_din0_x";
+							function = "pdm";
+							bias-disable;
+						};
+					};
+
+					pdm_din0_z_pins: pdm-din0-z {
+						mux {
+							groups = "pdm_din0_z";
+							function = "pdm";
+							bias-disable;
+						};
+					};
+
+					pdm_din1_a_pins: pdm-din1-a {
+						mux {
+							groups = "pdm_din1_a";
+							function = "pdm";
+							bias-disable;
+						};
+					};
+
+					pdm_din1_c_pins: pdm-din1-c {
+						mux {
+							groups = "pdm_din1_c";
+							function = "pdm";
+							bias-disable;
+						};
+					};
+
+					pdm_din1_x_pins: pdm-din1-x {
+						mux {
+							groups = "pdm_din1_x";
+							function = "pdm";
+							bias-disable;
+						};
+					};
+
+					pdm_din1_z_pins: pdm-din1-z {
+						mux {
+							groups = "pdm_din1_z";
+							function = "pdm";
+							bias-disable;
+						};
+					};
+
+					pdm_din2_a_pins: pdm-din2-a {
+						mux {
+							groups = "pdm_din2_a";
+							function = "pdm";
+							bias-disable;
+						};
+					};
+
+					pdm_din2_c_pins: pdm-din2-c {
+						mux {
+							groups = "pdm_din2_c";
+							function = "pdm";
+							bias-disable;
+						};
+					};
+
+					pdm_din2_x_pins: pdm-din2-x {
+						mux {
+							groups = "pdm_din2_x";
+							function = "pdm";
+							bias-disable;
+						};
+					};
+
+					pdm_din2_z_pins: pdm-din2-z {
+						mux {
+							groups = "pdm_din2_z";
+							function = "pdm";
+							bias-disable;
+						};
+					};
+
+					pdm_din3_a_pins: pdm-din3-a {
+						mux {
+							groups = "pdm_din3_a";
+							function = "pdm";
+							bias-disable;
+						};
+					};
+
+					pdm_din3_c_pins: pdm-din3-c {
+						mux {
+							groups = "pdm_din3_c";
+							function = "pdm";
+							bias-disable;
+						};
+					};
+
+					pdm_din3_x_pins: pdm-din3-x {
+						mux {
+							groups = "pdm_din3_x";
+							function = "pdm";
+							bias-disable;
+						};
+					};
+
+					pdm_din3_z_pins: pdm-din3-z {
+						mux {
+							groups = "pdm_din3_z";
+							function = "pdm";
+							bias-disable;
+						};
+					};
+
+					pdm_dclk_a_pins: pdm-dclk-a {
+						mux {
+							groups = "pdm_dclk_a";
+							function = "pdm";
+							bias-disable;
+							drive-strength-microamp = <500>;
+						};
+					};
+
+					pdm_dclk_c_pins: pdm-dclk-c {
+						mux {
+							groups = "pdm_dclk_c";
+							function = "pdm";
+							bias-disable;
+							drive-strength-microamp = <500>;
+						};
+					};
+
+					pdm_dclk_x_pins: pdm-dclk-x {
+						mux {
+							groups = "pdm_dclk_x";
+							function = "pdm";
+							bias-disable;
+							drive-strength-microamp = <500>;
+						};
+					};
+
+					pdm_dclk_z_pins: pdm-dclk-z {
+						mux {
+							groups = "pdm_dclk_z";
+							function = "pdm";
+							bias-disable;
+							drive-strength-microamp = <500>;
+						};
+					};
+
+					pwm_a_pins: pwm-a {
+						mux {
+							groups = "pwm_a";
+							function = "pwm_a";
+							bias-disable;
+						};
+					};
+
+					pwm_b_x7_pins: pwm-b-x7 {
+						mux {
+							groups = "pwm_b_x7";
+							function = "pwm_b";
+							bias-disable;
+						};
+					};
+
+					pwm_b_x19_pins: pwm-b-x19 {
+						mux {
+							groups = "pwm_b_x19";
+							function = "pwm_b";
+							bias-disable;
+						};
+					};
+
+					pwm_c_c_pins: pwm-c-c {
+						mux {
+							groups = "pwm_c_c";
+							function = "pwm_c";
+							bias-disable;
+						};
+					};
+
+					pwm_c_x5_pins: pwm-c-x5 {
+						mux {
+							groups = "pwm_c_x5";
+							function = "pwm_c";
+							bias-disable;
+						};
+					};
+
+					pwm_c_x8_pins: pwm-c-x8 {
+						mux {
+							groups = "pwm_c_x8";
+							function = "pwm_c";
+							bias-disable;
+						};
+					};
+
+					pwm_d_x3_pins: pwm-d-x3 {
+						mux {
+							groups = "pwm_d_x3";
+							function = "pwm_d";
+							bias-disable;
+						};
+					};
+
+					pwm_d_x6_pins: pwm-d-x6 {
+						mux {
+							groups = "pwm_d_x6";
+							function = "pwm_d";
+							bias-disable;
+						};
+					};
+
+					pwm_e_pins: pwm-e {
+						mux {
+							groups = "pwm_e";
+							function = "pwm_e";
+							bias-disable;
+						};
+					};
+
+					pwm_f_x_pins: pwm-f-x {
+						mux {
+							groups = "pwm_f_x";
+							function = "pwm_f";
+							bias-disable;
+						};
+					};
+
+					pwm_f_h_pins: pwm-f-h {
+						mux {
+							groups = "pwm_f_h";
+							function = "pwm_f";
+							bias-disable;
+						};
+					};
+
+					sdcard_c_pins: sdcard_c {
+						mux-0 {
+							groups = "sdcard_d0_c",
+								 "sdcard_d1_c",
+								 "sdcard_d2_c",
+								 "sdcard_d3_c",
+								 "sdcard_cmd_c";
+							function = "sdcard";
+							bias-pull-up;
+							drive-strength-microamp = <4000>;
+						};
+
+						mux-1 {
+							groups = "sdcard_clk_c";
+							function = "sdcard";
+							bias-disable;
+							drive-strength-microamp = <4000>;
+						};
+					};
+
+					sdcard_clk_gate_c_pins: sdcard_clk_gate_c {
+						mux {
+							groups = "GPIOC_4";
+							function = "gpio_periphs";
+							bias-pull-down;
+							drive-strength-microamp = <4000>;
+						};
+					};
+
+					sdcard_z_pins: sdcard_z {
+						mux-0 {
+							groups = "sdcard_d0_z",
+								 "sdcard_d1_z",
+								 "sdcard_d2_z",
+								 "sdcard_d3_z",
+								 "sdcard_cmd_z";
+							function = "sdcard";
+							bias-pull-up;
+							drive-strength-microamp = <4000>;
+						};
+
+						mux-1 {
+							groups = "sdcard_clk_z";
+							function = "sdcard";
+							bias-disable;
+							drive-strength-microamp = <4000>;
+						};
+					};
+
+					sdcard_clk_gate_z_pins: sdcard_clk_gate_z {
+						mux {
+							groups = "GPIOZ_6";
+							function = "gpio_periphs";
+							bias-pull-down;
+							drive-strength-microamp = <4000>;
+						};
+					};
+
+					sdio_pins: sdio {
+						mux {
+							groups = "sdio_d0",
+								 "sdio_d1",
+								 "sdio_d2",
+								 "sdio_d3",
+								 "sdio_clk",
+								 "sdio_cmd";
+							function = "sdio";
+							bias-disable;
+							drive-strength-microamp = <4000>;
+						};
+					};
+
+					sdio_clk_gate_pins: sdio_clk_gate {
+						mux {
+							groups = "GPIOX_4";
+							function = "gpio_periphs";
+							bias-pull-down;
+							drive-strength-microamp = <4000>;
+						};
+					};
+
+					spdif_in_a10_pins: spdif-in-a10 {
+						mux {
+							groups = "spdif_in_a10";
+							function = "spdif_in";
+							bias-disable;
+						};
+					};
+
+					spdif_in_a12_pins: spdif-in-a12 {
+						mux {
+							groups = "spdif_in_a12";
+							function = "spdif_in";
+							bias-disable;
+						};
+					};
+
+					spdif_in_h_pins: spdif-in-h {
+						mux {
+							groups = "spdif_in_h";
+							function = "spdif_in";
+							bias-disable;
+						};
+					};
+
+					spdif_out_h_pins: spdif-out-h {
+						mux {
+							groups = "spdif_out_h";
+							function = "spdif_out";
+							drive-strength-microamp = <500>;
+							bias-disable;
+						};
+					};
+
+					spdif_out_a11_pins: spdif-out-a11 {
+						mux {
+							groups = "spdif_out_a11";
+							function = "spdif_out";
+							drive-strength-microamp = <500>;
+							bias-disable;
+						};
+					};
+
+					spdif_out_a13_pins: spdif-out-a13 {
+						mux {
+							groups = "spdif_out_a13";
+							function = "spdif_out";
+							drive-strength-microamp = <500>;
+							bias-disable;
+						};
+					};
+
+					tdm_a_din0_pins: tdm-a-din0 {
+						mux {
+							groups = "tdm_a_din0";
+							function = "tdm_a";
+							bias-disable;
+						};
+					};
+
+
+					tdm_a_din1_pins: tdm-a-din1 {
+						mux {
+							groups = "tdm_a_din1";
+							function = "tdm_a";
+							bias-disable;
+						};
+					};
+
+					tdm_a_dout0_pins: tdm-a-dout0 {
+						mux {
+							groups = "tdm_a_dout0";
+							function = "tdm_a";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_a_dout1_pins: tdm-a-dout1 {
+						mux {
+							groups = "tdm_a_dout1";
+							function = "tdm_a";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_a_fs_pins: tdm-a-fs {
+						mux {
+							groups = "tdm_a_fs";
+							function = "tdm_a";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_a_sclk_pins: tdm-a-sclk {
+						mux {
+							groups = "tdm_a_sclk";
+							function = "tdm_a";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_a_slv_fs_pins: tdm-a-slv-fs {
+						mux {
+							groups = "tdm_a_slv_fs";
+							function = "tdm_a";
+							bias-disable;
+						};
+					};
+
+
+					tdm_a_slv_sclk_pins: tdm-a-slv-sclk {
+						mux {
+							groups = "tdm_a_slv_sclk";
+							function = "tdm_a";
+							bias-disable;
+						};
+					};
+
+					tdm_b_din0_pins: tdm-b-din0 {
+						mux {
+							groups = "tdm_b_din0";
+							function = "tdm_b";
+							bias-disable;
+						};
+					};
+
+					tdm_b_din1_pins: tdm-b-din1 {
+						mux {
+							groups = "tdm_b_din1";
+							function = "tdm_b";
+							bias-disable;
+						};
+					};
+
+					tdm_b_din2_pins: tdm-b-din2 {
+						mux {
+							groups = "tdm_b_din2";
+							function = "tdm_b";
+							bias-disable;
+						};
+					};
+
+					tdm_b_din3_a_pins: tdm-b-din3-a {
+						mux {
+							groups = "tdm_b_din3_a";
+							function = "tdm_b";
+							bias-disable;
+						};
+					};
+
+					tdm_b_din3_h_pins: tdm-b-din3-h {
+						mux {
+							groups = "tdm_b_din3_h";
+							function = "tdm_b";
+							bias-disable;
+						};
+					};
+
+					tdm_b_dout0_pins: tdm-b-dout0 {
+						mux {
+							groups = "tdm_b_dout0";
+							function = "tdm_b";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_b_dout1_pins: tdm-b-dout1 {
+						mux {
+							groups = "tdm_b_dout1";
+							function = "tdm_b";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_b_dout2_pins: tdm-b-dout2 {
+						mux {
+							groups = "tdm_b_dout2";
+							function = "tdm_b";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_b_dout3_a_pins: tdm-b-dout3-a {
+						mux {
+							groups = "tdm_b_dout3_a";
+							function = "tdm_b";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_b_dout3_h_pins: tdm-b-dout3-h {
+						mux {
+							groups = "tdm_b_dout3_h";
+							function = "tdm_b";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_b_fs_pins: tdm-b-fs {
+						mux {
+							groups = "tdm_b_fs";
+							function = "tdm_b";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_b_sclk_pins: tdm-b-sclk {
+						mux {
+							groups = "tdm_b_sclk";
+							function = "tdm_b";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_b_slv_fs_pins: tdm-b-slv-fs {
+						mux {
+							groups = "tdm_b_slv_fs";
+							function = "tdm_b";
+							bias-disable;
+						};
+					};
+
+					tdm_b_slv_sclk_pins: tdm-b-slv-sclk {
+						mux {
+							groups = "tdm_b_slv_sclk";
+							function = "tdm_b";
+							bias-disable;
+						};
+					};
+
+					tdm_c_din0_a_pins: tdm-c-din0-a {
+						mux {
+							groups = "tdm_c_din0_a";
+							function = "tdm_c";
+							bias-disable;
+						};
+					};
+
+					tdm_c_din0_z_pins: tdm-c-din0-z {
+						mux {
+							groups = "tdm_c_din0_z";
+							function = "tdm_c";
+							bias-disable;
+						};
+					};
+
+					tdm_c_din1_a_pins: tdm-c-din1-a {
+						mux {
+							groups = "tdm_c_din1_a";
+							function = "tdm_c";
+							bias-disable;
+						};
+					};
+
+					tdm_c_din1_z_pins: tdm-c-din1-z {
+						mux {
+							groups = "tdm_c_din1_z";
+							function = "tdm_c";
+							bias-disable;
+						};
+					};
+
+					tdm_c_din2_a_pins: tdm-c-din2-a {
+						mux {
+							groups = "tdm_c_din2_a";
+							function = "tdm_c";
+							bias-disable;
+						};
+					};
+
+					eth_leds_pins: eth-leds {
+						mux {
+							groups = "eth_link_led",
+								 "eth_act_led";
+							function = "eth";
+							bias-disable;
+						};
+					};
+
+					eth_pins: eth {
+						mux {
+							groups = "eth_mdio",
+								 "eth_mdc",
+								 "eth_rgmii_rx_clk",
+								 "eth_rx_dv",
+								 "eth_rxd0",
+								 "eth_rxd1",
+								 "eth_txen",
+								 "eth_txd0",
+								 "eth_txd1";
+							function = "eth";
+							drive-strength-microamp = <4000>;
+							bias-disable;
+						};
+					};
+
+					eth_rgmii_pins: eth-rgmii {
+						mux {
+							groups = "eth_rxd2_rgmii",
+								 "eth_rxd3_rgmii",
+								 "eth_rgmii_tx_clk",
+								 "eth_txd2_rgmii",
+								 "eth_txd3_rgmii";
+							function = "eth";
+							drive-strength-microamp = <4000>;
+							bias-disable;
+						};
+					};
+
+					tdm_c_din2_z_pins: tdm-c-din2-z {
+						mux {
+							groups = "tdm_c_din2_z";
+							function = "tdm_c";
+							bias-disable;
+						};
+					};
+
+					tdm_c_din3_a_pins: tdm-c-din3-a {
+						mux {
+							groups = "tdm_c_din3_a";
+							function = "tdm_c";
+							bias-disable;
+						};
+					};
+
+					tdm_c_din3_z_pins: tdm-c-din3-z {
+						mux {
+							groups = "tdm_c_din3_z";
+							function = "tdm_c";
+							bias-disable;
+						};
+					};
+
+					tdm_c_dout0_a_pins: tdm-c-dout0-a {
+						mux {
+							groups = "tdm_c_dout0_a";
+							function = "tdm_c";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_c_dout0_z_pins: tdm-c-dout0-z {
+						mux {
+							groups = "tdm_c_dout0_z";
+							function = "tdm_c";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_c_dout1_a_pins: tdm-c-dout1-a {
+						mux {
+							groups = "tdm_c_dout1_a";
+							function = "tdm_c";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_c_dout1_z_pins: tdm-c-dout1-z {
+						mux {
+							groups = "tdm_c_dout1_z";
+							function = "tdm_c";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_c_dout2_a_pins: tdm-c-dout2-a {
+						mux {
+							groups = "tdm_c_dout2_a";
+							function = "tdm_c";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_c_dout2_z_pins: tdm-c-dout2-z {
+						mux {
+							groups = "tdm_c_dout2_z";
+							function = "tdm_c";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_c_dout3_a_pins: tdm-c-dout3-a {
+						mux {
+							groups = "tdm_c_dout3_a";
+							function = "tdm_c";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_c_dout3_z_pins: tdm-c-dout3-z {
+						mux {
+							groups = "tdm_c_dout3_z";
+							function = "tdm_c";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_c_fs_a_pins: tdm-c-fs-a {
+						mux {
+							groups = "tdm_c_fs_a";
+							function = "tdm_c";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_c_fs_z_pins: tdm-c-fs-z {
+						mux {
+							groups = "tdm_c_fs_z";
+							function = "tdm_c";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_c_sclk_a_pins: tdm-c-sclk-a {
+						mux {
+							groups = "tdm_c_sclk_a";
+							function = "tdm_c";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_c_sclk_z_pins: tdm-c-sclk-z {
+						mux {
+							groups = "tdm_c_sclk_z";
+							function = "tdm_c";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_c_slv_fs_a_pins: tdm-c-slv-fs-a {
+						mux {
+							groups = "tdm_c_slv_fs_a";
+							function = "tdm_c";
+							bias-disable;
+						};
+					};
+
+					tdm_c_slv_fs_z_pins: tdm-c-slv-fs-z {
+						mux {
+							groups = "tdm_c_slv_fs_z";
+							function = "tdm_c";
+							bias-disable;
+						};
+					};
+
+					tdm_c_slv_sclk_a_pins: tdm-c-slv-sclk-a {
+						mux {
+							groups = "tdm_c_slv_sclk_a";
+							function = "tdm_c";
+							bias-disable;
+						};
+					};
+
+					tdm_c_slv_sclk_z_pins: tdm-c-slv-sclk-z {
+						mux {
+							groups = "tdm_c_slv_sclk_z";
+							function = "tdm_c";
+							bias-disable;
+						};
+					};
+
+					uart_a_pins: uart-a {
+						mux {
+							groups = "uart_a_tx",
+								 "uart_a_rx";
+							function = "uart_a";
+							bias-disable;
+						};
+					};
+
+					uart_a_cts_rts_pins: uart-a-cts-rts {
+						mux {
+							groups = "uart_a_cts",
+								 "uart_a_rts";
+							function = "uart_a";
+							bias-disable;
+						};
+					};
+
+					uart_b_pins: uart-b {
+						mux {
+							groups = "uart_b_tx",
+								 "uart_b_rx";
+							function = "uart_b";
+							bias-disable;
+						};
+					};
+
+					uart_c_pins: uart-c {
+						mux {
+							groups = "uart_c_tx",
+								 "uart_c_rx";
+							function = "uart_c";
+							bias-disable;
+						};
+					};
+
+					uart_c_cts_rts_pins: uart-c-cts-rts {
+						mux {
+							groups = "uart_c_cts",
+								 "uart_c_rts";
+							function = "uart_c";
+							bias-disable;
+						};
+					};
+				};
+			};
+
+			usb2_phy0: phy at 36000 {
+				compatible = "amlogic,g12a-usb2-phy";
+				reg = <0x0 0x36000 0x0 0x2000>;
+				clocks = <&xtal>;
+				clock-names = "xtal";
+				resets = <&reset RESET_USB_PHY20>;
+				reset-names = "phy";
+				#phy-cells = <0>;
+			};
+
+			dmc: bus at 38000 {
+				compatible = "simple-bus";
+				reg = <0x0 0x38000 0x0 0x400>;
+				#address-cells = <2>;
+				#size-cells = <2>;
+				ranges = <0x0 0x0 0x0 0x38000 0x0 0x400>;
+
+				canvas: video-lut at 48 {
+					compatible = "amlogic,canvas";
+					reg = <0x0 0x48 0x0 0x14>;
+				};
+			};
+
+			usb2_phy1: phy at 3a000 {
+				compatible = "amlogic,g12a-usb2-phy";
+				reg = <0x0 0x3a000 0x0 0x2000>;
+				clocks = <&xtal>;
+				clock-names = "xtal";
+				resets = <&reset RESET_USB_PHY21>;
+				reset-names = "phy";
+				#phy-cells = <0>;
+			};
+
+			hiu: bus at 3c000 {
+				compatible = "simple-bus";
+				reg = <0x0 0x3c000 0x0 0x1400>;
+				#address-cells = <2>;
+				#size-cells = <2>;
+				ranges = <0x0 0x0 0x0 0x3c000 0x0 0x1400>;
+
+				hhi: system-controller at 0 {
+					compatible = "amlogic,meson-gx-hhi-sysctrl",
+						     "simple-mfd", "syscon";
+					reg = <0 0 0 0x400>;
+
+					clkc: clock-controller {
+						compatible = "amlogic,g12a-clkc";
+						#clock-cells = <1>;
+						clocks = <&xtal>;
+						clock-names = "xtal";
+					};
+
+					pwrc: power-controller {
+						compatible = "amlogic,meson-g12a-pwrc";
+						#power-domain-cells = <1>;
+						amlogic,ao-sysctrl = <&rti>;
+						resets = <&reset RESET_VIU>,
+							 <&reset RESET_VENC>,
+							 <&reset RESET_VCBUS>,
+							 <&reset RESET_BT656>,
+							 <&reset RESET_RDMA>,
+							 <&reset RESET_VENCI>,
+							 <&reset RESET_VENCP>,
+							 <&reset RESET_VDAC>,
+							 <&reset RESET_VDI6>,
+							 <&reset RESET_VENCL>,
+							 <&reset RESET_VID_LOCK>;
+						reset-names = "viu", "venc", "vcbus", "bt656",
+							      "rdma", "venci", "vencp", "vdac",
+							      "vdi6", "vencl", "vid_lock";
+						clocks = <&clkc CLKID_VPU>,
+							 <&clkc CLKID_VAPB>;
+						clock-names = "vpu", "vapb";
+						/*
+						 * VPU clocking is provided by two identical clock paths
+						 * VPU_0 and VPU_1 muxed to a single clock by a glitch
+						 * free mux to safely change frequency while running.
+						 * Same for VAPB but with a final gate after the glitch free mux.
+						 */
+						assigned-clocks = <&clkc CLKID_VPU_0_SEL>,
+								  <&clkc CLKID_VPU_0>,
+								  <&clkc CLKID_VPU>, /* Glitch free mux */
+								  <&clkc CLKID_VAPB_0_SEL>,
+								  <&clkc CLKID_VAPB_0>,
+								  <&clkc CLKID_VAPB_SEL>; /* Glitch free mux */
+						assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>,
+									 <0>, /* Do Nothing */
+									 <&clkc CLKID_VPU_0>,
+									 <&clkc CLKID_FCLK_DIV4>,
+									 <0>, /* Do Nothing */
+									 <&clkc CLKID_VAPB_0>;
+						assigned-clock-rates = <0>, /* Do Nothing */
+								       <666666666>,
+								       <0>, /* Do Nothing */
+								       <0>, /* Do Nothing */
+								       <250000000>,
+								       <0>; /* Do Nothing */
+					};
+				};
+			};
+
+			pdm: audio-controller at 40000 {
+				compatible = "amlogic,g12a-pdm",
+					     "amlogic,axg-pdm";
+				reg = <0x0 0x40000 0x0 0x34>;
+				#sound-dai-cells = <0>;
+				sound-name-prefix = "PDM";
+				clocks = <&clkc_audio AUD_CLKID_PDM>,
+					 <&clkc_audio AUD_CLKID_PDM_DCLK>,
+					 <&clkc_audio AUD_CLKID_PDM_SYSCLK>;
+				clock-names = "pclk", "dclk", "sysclk";
+				status = "disabled";
+			};
+
+			audio: bus at 42000 {
+				compatible = "simple-bus";
+				reg = <0x0 0x42000 0x0 0x2000>;
+				#address-cells = <2>;
+				#size-cells = <2>;
+				ranges = <0x0 0x0 0x0 0x42000 0x0 0x2000>;
+
+				clkc_audio: clock-controller at 0 {
+					status = "disabled";
+					compatible = "amlogic,g12a-audio-clkc";
+					reg = <0x0 0x0 0x0 0xb4>;
+					#clock-cells = <1>;
+					#reset-cells = <1>;
+
+					clocks = <&clkc CLKID_AUDIO>,
+						 <&clkc CLKID_MPLL0>,
+						 <&clkc CLKID_MPLL1>,
+						 <&clkc CLKID_MPLL2>,
+						 <&clkc CLKID_MPLL3>,
+						 <&clkc CLKID_HIFI_PLL>,
+						 <&clkc CLKID_FCLK_DIV3>,
+						 <&clkc CLKID_FCLK_DIV4>,
+						 <&clkc CLKID_GP0_PLL>;
+					clock-names = "pclk",
+						      "mst_in0",
+						      "mst_in1",
+						      "mst_in2",
+						      "mst_in3",
+						      "mst_in4",
+						      "mst_in5",
+						      "mst_in6",
+						      "mst_in7";
+
+					resets = <&reset RESET_AUDIO>;
+				};
+
+				toddr_a: audio-controller at 100 {
+					compatible = "amlogic,g12a-toddr",
+						     "amlogic,axg-toddr";
+					reg = <0x0 0x100 0x0 0x1c>;
+					#sound-dai-cells = <0>;
+					sound-name-prefix = "TODDR_A";
+					interrupts = <GIC_SPI 148 IRQ_TYPE_EDGE_RISING>;
+					clocks = <&clkc_audio AUD_CLKID_TODDR_A>;
+					resets = <&arb AXG_ARB_TODDR_A>;
+					status = "disabled";
+				};
+
+				toddr_b: audio-controller at 140 {
+					compatible = "amlogic,g12a-toddr",
+						     "amlogic,axg-toddr";
+					reg = <0x0 0x140 0x0 0x1c>;
+					#sound-dai-cells = <0>;
+					sound-name-prefix = "TODDR_B";
+					interrupts = <GIC_SPI 149 IRQ_TYPE_EDGE_RISING>;
+					clocks = <&clkc_audio AUD_CLKID_TODDR_B>;
+					resets = <&arb AXG_ARB_TODDR_B>;
+					status = "disabled";
+				};
+
+				toddr_c: audio-controller at 180 {
+					compatible = "amlogic,g12a-toddr",
+						     "amlogic,axg-toddr";
+					reg = <0x0 0x180 0x0 0x1c>;
+					#sound-dai-cells = <0>;
+					sound-name-prefix = "TODDR_C";
+					interrupts = <GIC_SPI 150 IRQ_TYPE_EDGE_RISING>;
+					clocks = <&clkc_audio AUD_CLKID_TODDR_C>;
+					resets = <&arb AXG_ARB_TODDR_C>;
+					status = "disabled";
+				};
+
+				frddr_a: audio-controller at 1c0 {
+					compatible = "amlogic,g12a-frddr",
+						     "amlogic,axg-frddr";
+					reg = <0x0 0x1c0 0x0 0x1c>;
+					#sound-dai-cells = <0>;
+					sound-name-prefix = "FRDDR_A";
+					interrupts = <GIC_SPI 152 IRQ_TYPE_EDGE_RISING>;
+					clocks = <&clkc_audio AUD_CLKID_FRDDR_A>;
+					resets = <&arb AXG_ARB_FRDDR_A>;
+					status = "disabled";
+				};
+
+				frddr_b: audio-controller at 200 {
+					compatible = "amlogic,g12a-frddr",
+						     "amlogic,axg-frddr";
+					reg = <0x0 0x200 0x0 0x1c>;
+					#sound-dai-cells = <0>;
+					sound-name-prefix = "FRDDR_B";
+					interrupts = <GIC_SPI 153 IRQ_TYPE_EDGE_RISING>;
+					clocks = <&clkc_audio AUD_CLKID_FRDDR_B>;
+					resets = <&arb AXG_ARB_FRDDR_B>;
+					status = "disabled";
+				};
+
+				frddr_c: audio-controller at 240 {
+					compatible = "amlogic,g12a-frddr",
+						     "amlogic,axg-frddr";
+					reg = <0x0 0x240 0x0 0x1c>;
+					#sound-dai-cells = <0>;
+					sound-name-prefix = "FRDDR_C";
+					interrupts = <GIC_SPI 154 IRQ_TYPE_EDGE_RISING>;
+					clocks = <&clkc_audio AUD_CLKID_FRDDR_C>;
+					resets = <&arb AXG_ARB_FRDDR_C>;
+					status = "disabled";
+				};
+
+				arb: reset-controller at 280 {
+					status = "disabled";
+					compatible = "amlogic,meson-axg-audio-arb";
+					reg = <0x0 0x280 0x0 0x4>;
+					#reset-cells = <1>;
+					clocks = <&clkc_audio AUD_CLKID_DDR_ARB>;
+				};
+
+				tdmin_a: audio-controller at 300 {
+					compatible = "amlogic,g12a-tdmin",
+						     "amlogic,axg-tdmin";
+					reg = <0x0 0x300 0x0 0x40>;
+					sound-name-prefix = "TDMIN_A";
+					resets = <&clkc_audio AUD_RESET_TDMIN_A>;
+					clocks = <&clkc_audio AUD_CLKID_TDMIN_A>,
+						 <&clkc_audio AUD_CLKID_TDMIN_A_SCLK>,
+						 <&clkc_audio AUD_CLKID_TDMIN_A_SCLK_SEL>,
+						 <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>,
+						 <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>;
+					clock-names = "pclk", "sclk", "sclk_sel",
+						      "lrclk", "lrclk_sel";
+					status = "disabled";
+				};
+
+				tdmin_b: audio-controller at 340 {
+					compatible = "amlogic,g12a-tdmin",
+						     "amlogic,axg-tdmin";
+					reg = <0x0 0x340 0x0 0x40>;
+					sound-name-prefix = "TDMIN_B";
+					resets = <&clkc_audio AUD_RESET_TDMIN_B>;
+					clocks = <&clkc_audio AUD_CLKID_TDMIN_B>,
+						 <&clkc_audio AUD_CLKID_TDMIN_B_SCLK>,
+						 <&clkc_audio AUD_CLKID_TDMIN_B_SCLK_SEL>,
+						 <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>,
+						 <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>;
+					clock-names = "pclk", "sclk", "sclk_sel",
+						      "lrclk", "lrclk_sel";
+					status = "disabled";
+				};
+
+				tdmin_c: audio-controller at 380 {
+					compatible = "amlogic,g12a-tdmin",
+						     "amlogic,axg-tdmin";
+					reg = <0x0 0x380 0x0 0x40>;
+					sound-name-prefix = "TDMIN_C";
+					resets = <&clkc_audio AUD_RESET_TDMIN_C>;
+					clocks = <&clkc_audio AUD_CLKID_TDMIN_C>,
+						 <&clkc_audio AUD_CLKID_TDMIN_C_SCLK>,
+						 <&clkc_audio AUD_CLKID_TDMIN_C_SCLK_SEL>,
+						 <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>,
+						 <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>;
+					clock-names = "pclk", "sclk", "sclk_sel",
+						      "lrclk", "lrclk_sel";
+					status = "disabled";
+				};
+
+				tdmin_lb: audio-controller at 3c0 {
+					compatible = "amlogic,g12a-tdmin",
+						     "amlogic,axg-tdmin";
+					reg = <0x0 0x3c0 0x0 0x40>;
+					sound-name-prefix = "TDMIN_LB";
+					resets = <&clkc_audio AUD_RESET_TDMIN_LB>;
+					clocks = <&clkc_audio AUD_CLKID_TDMIN_LB>,
+						 <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK>,
+						 <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK_SEL>,
+						 <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>,
+						 <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>;
+					clock-names = "pclk", "sclk", "sclk_sel",
+						      "lrclk", "lrclk_sel";
+					status = "disabled";
+				};
+
+				spdifin: audio-controller at 400 {
+					compatible = "amlogic,g12a-spdifin",
+						     "amlogic,axg-spdifin";
+					reg = <0x0 0x400 0x0 0x30>;
+					#sound-dai-cells = <0>;
+					sound-name-prefix = "SPDIFIN";
+					interrupts = <GIC_SPI 151 IRQ_TYPE_EDGE_RISING>;
+					clocks = <&clkc_audio AUD_CLKID_SPDIFIN>,
+						 <&clkc_audio AUD_CLKID_SPDIFIN_CLK>;
+					clock-names = "pclk", "refclk";
+					status = "disabled";
+				};
+
+				spdifout: audio-controller at 480 {
+					compatible = "amlogic,g12a-spdifout",
+						     "amlogic,axg-spdifout";
+					reg = <0x0 0x480 0x0 0x50>;
+					#sound-dai-cells = <0>;
+					sound-name-prefix = "SPDIFOUT";
+					clocks = <&clkc_audio AUD_CLKID_SPDIFOUT>,
+						 <&clkc_audio AUD_CLKID_SPDIFOUT_CLK>;
+					clock-names = "pclk", "mclk";
+					status = "disabled";
+				};
+
+				tdmout_a: audio-controller at 500 {
+					compatible = "amlogic,g12a-tdmout";
+					reg = <0x0 0x500 0x0 0x40>;
+					sound-name-prefix = "TDMOUT_A";
+					resets = <&clkc_audio AUD_RESET_TDMOUT_A>;
+					clocks = <&clkc_audio AUD_CLKID_TDMOUT_A>,
+						 <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK>,
+						 <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK_SEL>,
+						 <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>,
+						 <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>;
+					clock-names = "pclk", "sclk", "sclk_sel",
+						      "lrclk", "lrclk_sel";
+					status = "disabled";
+				};
+
+				tdmout_b: audio-controller at 540 {
+					compatible = "amlogic,g12a-tdmout";
+					reg = <0x0 0x540 0x0 0x40>;
+					sound-name-prefix = "TDMOUT_B";
+					resets = <&clkc_audio AUD_RESET_TDMOUT_B>;
+					clocks = <&clkc_audio AUD_CLKID_TDMOUT_B>,
+						 <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK>,
+						 <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK_SEL>,
+						 <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>,
+						 <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>;
+					clock-names = "pclk", "sclk", "sclk_sel",
+						      "lrclk", "lrclk_sel";
+					status = "disabled";
+				};
+
+				tdmout_c: audio-controller at 580 {
+					compatible = "amlogic,g12a-tdmout";
+					reg = <0x0 0x580 0x0 0x40>;
+					sound-name-prefix = "TDMOUT_C";
+					resets = <&clkc_audio AUD_RESET_TDMOUT_C>;
+					clocks = <&clkc_audio AUD_CLKID_TDMOUT_C>,
+						 <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK>,
+						 <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK_SEL>,
+						 <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>,
+						 <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>;
+					clock-names = "pclk", "sclk", "sclk_sel",
+						      "lrclk", "lrclk_sel";
+					status = "disabled";
+				};
+
+				spdifout_b: audio-controller at 680 {
+					compatible = "amlogic,g12a-spdifout",
+						     "amlogic,axg-spdifout";
+					reg = <0x0 0x680 0x0 0x50>;
+					#sound-dai-cells = <0>;
+					sound-name-prefix = "SPDIFOUT_B";
+					clocks = <&clkc_audio AUD_CLKID_SPDIFOUT_B>,
+						 <&clkc_audio AUD_CLKID_SPDIFOUT_B_CLK>;
+					clock-names = "pclk", "mclk";
+					status = "disabled";
+				};
+
+				tohdmitx: audio-controller at 744 {
+					compatible = "amlogic,g12a-tohdmitx";
+					reg = <0x0 0x744 0x0 0x4>;
+					#sound-dai-cells = <1>;
+					sound-name-prefix = "TOHDMITX";
+					status = "disabled";
+				};
+			};
+
+			usb3_pcie_phy: phy at 46000 {
+				compatible = "amlogic,g12a-usb3-pcie-phy";
+				reg = <0x0 0x46000 0x0 0x2000>;
+				clocks = <&clkc CLKID_PCIE_PLL>;
+				clock-names = "ref_clk";
+				resets = <&reset RESET_PCIE_PHY>;
+				reset-names = "phy";
+				assigned-clocks = <&clkc CLKID_PCIE_PLL>;
+				assigned-clock-rates = <100000000>;
+				#phy-cells = <1>;
+			};
+
+			eth_phy: mdio-multiplexer at 4c000 {
+				compatible = "amlogic,g12a-mdio-mux";
+				reg = <0x0 0x4c000 0x0 0xa4>;
+				clocks = <&clkc CLKID_ETH_PHY>,
+					 <&xtal>,
+					 <&clkc CLKID_MPLL_50M>;
+				clock-names = "pclk", "clkin0", "clkin1";
+				mdio-parent-bus = <&mdio0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ext_mdio: mdio at 0 {
+					reg = <0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				int_mdio: mdio at 1 {
+					reg = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					internal_ephy: ethernet_phy at 8 {
+						compatible = "ethernet-phy-id0180.3301",
+							     "ethernet-phy-ieee802.3-c22";
+						interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+						reg = <8>;
+						max-speed = <100>;
+					};
+				};
+			};
+		};
+
+		aobus: bus at ff800000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xff800000 0x0 0x100000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xff800000 0x0 0x100000>;
+
+			rti: sys-ctrl at 0 {
+				compatible = "amlogic,meson-gx-ao-sysctrl",
+					     "simple-mfd", "syscon";
+				reg = <0x0 0x0 0x0 0x100>;
+				#address-cells = <2>;
+				#size-cells = <2>;
+				ranges = <0x0 0x0 0x0 0x0 0x0 0x100>;
+
+				clkc_AO: clock-controller {
+					compatible = "amlogic,meson-g12a-aoclkc";
+					#clock-cells = <1>;
+					#reset-cells = <1>;
+					clocks = <&xtal>, <&clkc CLKID_CLK81>;
+					clock-names = "xtal", "mpeg-clk";
+				};
+
+				ao_pinctrl: pinctrl at 14 {
+					compatible = "amlogic,meson-g12a-aobus-pinctrl";
+					#address-cells = <2>;
+					#size-cells = <2>;
+					ranges;
+
+					gpio_ao: bank at 14 {
+						reg = <0x0 0x14 0x0 0x8>,
+						      <0x0 0x1c 0x0 0x8>,
+						      <0x0 0x24 0x0 0x14>;
+						reg-names = "mux",
+							    "ds",
+							    "gpio";
+						gpio-controller;
+						#gpio-cells = <2>;
+						gpio-ranges = <&ao_pinctrl 0 0 15>;
+					};
+
+					i2c_ao_sck_pins: i2c_ao_sck_pins {
+						mux {
+							groups = "i2c_ao_sck";
+							function = "i2c_ao";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c_ao_sda_pins: i2c_ao_sda {
+						mux {
+							groups = "i2c_ao_sda";
+							function = "i2c_ao";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c_ao_sck_e_pins: i2c_ao_sck_e {
+						mux {
+							groups = "i2c_ao_sck_e";
+							function = "i2c_ao";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c_ao_sda_e_pins: i2c_ao_sda_e {
+						mux {
+							groups = "i2c_ao_sda_e";
+							function = "i2c_ao";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					mclk0_ao_pins: mclk0-ao {
+						mux {
+							groups = "mclk0_ao";
+							function = "mclk0_ao";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_ao_b_din0_pins: tdm-ao-b-din0 {
+						mux {
+							groups = "tdm_ao_b_din0";
+							function = "tdm_ao_b";
+							bias-disable;
+						};
+					};
+
+					spdif_ao_out_pins: spdif-ao-out {
+						mux {
+							groups = "spdif_ao_out";
+							function = "spdif_ao_out";
+							drive-strength-microamp = <500>;
+							bias-disable;
+						};
+					};
+
+					tdm_ao_b_din1_pins: tdm-ao-b-din1 {
+						mux {
+							groups = "tdm_ao_b_din1";
+							function = "tdm_ao_b";
+							bias-disable;
+						};
+					};
+
+					tdm_ao_b_din2_pins: tdm-ao-b-din2 {
+						mux {
+							groups = "tdm_ao_b_din2";
+							function = "tdm_ao_b";
+							bias-disable;
+						};
+					};
+
+					tdm_ao_b_dout0_pins: tdm-ao-b-dout0 {
+						mux {
+							groups = "tdm_ao_b_dout0";
+							function = "tdm_ao_b";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_ao_b_dout1_pins: tdm-ao-b-dout1 {
+						mux {
+							groups = "tdm_ao_b_dout1";
+							function = "tdm_ao_b";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_ao_b_dout2_pins: tdm-ao-b-dout2 {
+						mux {
+							groups = "tdm_ao_b_dout2";
+							function = "tdm_ao_b";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_ao_b_fs_pins: tdm-ao-b-fs {
+						mux {
+							groups = "tdm_ao_b_fs";
+							function = "tdm_ao_b";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_ao_b_sclk_pins: tdm-ao-b-sclk {
+						mux {
+							groups = "tdm_ao_b_sclk";
+							function = "tdm_ao_b";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_ao_b_slv_fs_pins: tdm-ao-b-slv-fs {
+						mux {
+							groups = "tdm_ao_b_slv_fs";
+							function = "tdm_ao_b";
+							bias-disable;
+						};
+					};
+
+					tdm_ao_b_slv_sclk_pins: tdm-ao-b-slv-sclk {
+						mux {
+							groups = "tdm_ao_b_slv_sclk";
+							function = "tdm_ao_b";
+							bias-disable;
+						};
+					};
+
+					uart_ao_a_pins: uart-a-ao {
+						mux {
+							groups = "uart_ao_a_tx",
+								 "uart_ao_a_rx";
+							function = "uart_ao_a";
+							bias-disable;
+						};
+					};
+
+					uart_ao_a_cts_rts_pins: uart-ao-a-cts-rts {
+						mux {
+							groups = "uart_ao_a_cts",
+								 "uart_ao_a_rts";
+							function = "uart_ao_a";
+							bias-disable;
+						};
+					};
+
+					pwm_a_e_pins: pwm-a-e {
+						mux {
+							groups = "pwm_a_e";
+							function = "pwm_a_e";
+							bias-disable;
+						};
+					};
+
+					pwm_ao_a_pins: pwm-ao-a {
+						mux {
+							groups = "pwm_ao_a";
+							function = "pwm_ao_a";
+							bias-disable;
+						};
+					};
+
+					pwm_ao_b_pins: pwm-ao-b {
+						mux {
+							groups = "pwm_ao_b";
+							function = "pwm_ao_b";
+							bias-disable;
+						};
+					};
+
+					pwm_ao_c_4_pins: pwm-ao-c-4 {
+						mux {
+							groups = "pwm_ao_c_4";
+							function = "pwm_ao_c";
+							bias-disable;
+						};
+					};
+
+					pwm_ao_c_6_pins: pwm-ao-c-6 {
+						mux {
+							groups = "pwm_ao_c_6";
+							function = "pwm_ao_c";
+							bias-disable;
+						};
+					};
+
+					pwm_ao_d_5_pins: pwm-ao-d-5 {
+						mux {
+							groups = "pwm_ao_d_5";
+							function = "pwm_ao_d";
+							bias-disable;
+						};
+					};
+
+					pwm_ao_d_10_pins: pwm-ao-d-10 {
+						mux {
+							groups = "pwm_ao_d_10";
+							function = "pwm_ao_d";
+							bias-disable;
+						};
+					};
+
+					pwm_ao_d_e_pins: pwm-ao-d-e {
+						mux {
+							groups = "pwm_ao_d_e";
+							function = "pwm_ao_d";
+						};
+					};
+
+					remote_input_ao_pins: remote-input-ao {
+						mux {
+							groups = "remote_ao_input";
+							function = "remote_ao_input";
+							bias-disable;
+						};
+					};
+				};
+			};
+
+			vrtc: rtc at 0a8 {
+				compatible = "amlogic,meson-vrtc";
+				reg = <0x0 0x000a8 0x0 0x4>;
+			};
+
+			cec_AO: cec at 100 {
+				compatible = "amlogic,meson-gx-ao-cec";
+				reg = <0x0 0x00100 0x0 0x14>;
+				interrupts = <GIC_SPI 199 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc_AO CLKID_AO_CEC>;
+				clock-names = "core";
+				status = "disabled";
+			};
+
+			sec_AO: ao-secure at 140 {
+				compatible = "amlogic,meson-gx-ao-secure", "syscon";
+				reg = <0x0 0x140 0x0 0x140>;
+				amlogic,has-chip-id;
+			};
+
+			cecb_AO: cec at 280 {
+				compatible = "amlogic,meson-g12a-ao-cec";
+				reg = <0x0 0x00280 0x0 0x1c>;
+				interrupts = <GIC_SPI 203 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc_AO CLKID_AO_CTS_OSCIN>;
+				clock-names = "oscin";
+				status = "disabled";
+			};
+
+			pwm_AO_cd: pwm at 2000 {
+				compatible = "amlogic,meson-g12a-ao-pwm-cd";
+				reg = <0x0 0x2000 0x0 0x20>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			uart_AO: serial at 3000 {
+				compatible = "amlogic,meson-gx-uart",
+					     "amlogic,meson-ao-uart";
+				reg = <0x0 0x3000 0x0 0x18>;
+				interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>, <&clkc_AO CLKID_AO_UART>, <&xtal>;
+				clock-names = "xtal", "pclk", "baud";
+				status = "disabled";
+			};
+
+			uart_AO_B: serial at 4000 {
+				compatible = "amlogic,meson-gx-uart",
+					     "amlogic,meson-ao-uart";
+				reg = <0x0 0x4000 0x0 0x18>;
+				interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>, <&clkc_AO CLKID_AO_UART2>, <&xtal>;
+				clock-names = "xtal", "pclk", "baud";
+				status = "disabled";
+			};
+
+			i2c_AO: i2c at 5000 {
+				compatible = "amlogic,meson-axg-i2c";
+				status = "disabled";
+				reg = <0x0 0x05000 0x0 0x20>;
+				interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clkc CLKID_I2C>;
+			};
+
+			pwm_AO_ab: pwm at 7000 {
+				compatible = "amlogic,meson-g12a-ao-pwm-ab";
+				reg = <0x0 0x7000 0x0 0x20>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			ir: ir at 8000 {
+				compatible = "amlogic,meson-gxbb-ir";
+				reg = <0x0 0x8000 0x0 0x20>;
+				interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+
+			saradc: adc at 9000 {
+				compatible = "amlogic,meson-g12a-saradc",
+					     "amlogic,meson-saradc";
+				reg = <0x0 0x9000 0x0 0x48>;
+				#io-channel-cells = <1>;
+				interrupts = <GIC_SPI 200 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>,
+					 <&clkc_AO CLKID_AO_SAR_ADC>,
+					 <&clkc_AO CLKID_AO_SAR_ADC_CLK>,
+					 <&clkc_AO CLKID_AO_SAR_ADC_SEL>;
+				clock-names = "clkin", "core", "adc_clk", "adc_sel";
+				status = "disabled";
+			};
+		};
+
+		vpu: vpu at ff900000 {
+			compatible = "amlogic,meson-g12a-vpu";
+			reg = <0x0 0xff900000 0x0 0x100000>,
+			      <0x0 0xff63c000 0x0 0x1000>;
+			reg-names = "vpu", "hhi";
+			interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			amlogic,canvas = <&canvas>;
+
+			/* CVBS VDAC output port */
+			cvbs_vdac_port: port at 0 {
+				reg = <0>;
+			};
+
+			/* HDMI-TX output port */
+			hdmi_tx_port: port at 1 {
+				reg = <1>;
+
+				hdmi_tx_out: endpoint {
+					remote-endpoint = <&hdmi_tx_in>;
+				};
+			};
+		};
+
+		gic: interrupt-controller at ffc01000 {
+			compatible = "arm,gic-400";
+			reg = <0x0 0xffc01000 0 0x1000>,
+			      <0x0 0xffc02000 0 0x2000>,
+			      <0x0 0xffc04000 0 0x2000>,
+			      <0x0 0xffc06000 0 0x2000>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9
+				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+		};
+
+		cbus: bus at ffd00000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xffd00000 0x0 0x100000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xffd00000 0x0 0x100000>;
+
+			reset: reset-controller at 1004 {
+				compatible = "amlogic,meson-axg-reset";
+				reg = <0x0 0x1004 0x0 0x9c>;
+				#reset-cells = <1>;
+			};
+
+			gpio_intc: interrupt-controller at f080 {
+				compatible = "amlogic,meson-g12a-gpio-intc",
+					     "amlogic,meson-gpio-intc";
+				reg = <0x0 0xf080 0x0 0x10>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>;
+			};
+
+			pwm_ef: pwm at 19000 {
+				compatible = "amlogic,meson-g12a-ee-pwm";
+				reg = <0x0 0x19000 0x0 0x20>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm_cd: pwm at 1a000 {
+				compatible = "amlogic,meson-g12a-ee-pwm";
+				reg = <0x0 0x1a000 0x0 0x20>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm_ab: pwm at 1b000 {
+				compatible = "amlogic,meson-g12a-ee-pwm";
+				reg = <0x0 0x1b000 0x0 0x20>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			i2c3: i2c at 1c000 {
+				compatible = "amlogic,meson-axg-i2c";
+				status = "disabled";
+				reg = <0x0 0x1c000 0x0 0x20>;
+				interrupts = <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clkc CLKID_I2C>;
+			};
+
+			i2c2: i2c at 1d000 {
+				compatible = "amlogic,meson-axg-i2c";
+				status = "disabled";
+				reg = <0x0 0x1d000 0x0 0x20>;
+				interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clkc CLKID_I2C>;
+			};
+
+			i2c1: i2c at 1e000 {
+				compatible = "amlogic,meson-axg-i2c";
+				status = "disabled";
+				reg = <0x0 0x1e000 0x0 0x20>;
+				interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clkc CLKID_I2C>;
+			};
+
+			i2c0: i2c at 1f000 {
+				compatible = "amlogic,meson-axg-i2c";
+				status = "disabled";
+				reg = <0x0 0x1f000 0x0 0x20>;
+				interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clkc CLKID_I2C>;
+			};
+
+			clk_msr: clock-measure at 18000 {
+				compatible = "amlogic,meson-g12a-clk-measure";
+				reg = <0x0 0x18000 0x0 0x10>;
+			};
+
+			uart_C: serial at 22000 {
+				compatible = "amlogic,meson-gx-uart";
+				reg = <0x0 0x22000 0x0 0x18>;
+				interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>, <&clkc CLKID_UART2>, <&xtal>;
+				clock-names = "xtal", "pclk", "baud";
+				status = "disabled";
+			};
+
+			uart_B: serial at 23000 {
+				compatible = "amlogic,meson-gx-uart";
+				reg = <0x0 0x23000 0x0 0x18>;
+				interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>, <&clkc CLKID_UART1>, <&xtal>;
+				clock-names = "xtal", "pclk", "baud";
+				status = "disabled";
+			};
+
+			uart_A: serial at 24000 {
+				compatible = "amlogic,meson-gx-uart";
+				reg = <0x0 0x24000 0x0 0x18>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>;
+				clock-names = "xtal", "pclk", "baud";
+				status = "disabled";
+			};
+		};
+
+		sd_emmc_a: sd at ffe03000 {
+			compatible = "amlogic,meson-axg-mmc";
+			reg = <0x0 0xffe03000 0x0 0x800>;
+			interrupts = <GIC_SPI 189 IRQ_TYPE_EDGE_RISING>;
+			status = "disabled";
+			clocks = <&clkc CLKID_SD_EMMC_A>,
+				 <&clkc CLKID_SD_EMMC_A_CLK0>,
+				 <&clkc CLKID_FCLK_DIV2>;
+			clock-names = "core", "clkin0", "clkin1";
+			resets = <&reset RESET_SD_EMMC_A>;
+		};
+
+		sd_emmc_b: sd at ffe05000 {
+			compatible = "amlogic,meson-axg-mmc";
+			reg = <0x0 0xffe05000 0x0 0x800>;
+			interrupts = <GIC_SPI 190 IRQ_TYPE_EDGE_RISING>;
+			status = "disabled";
+			clocks = <&clkc CLKID_SD_EMMC_B>,
+				 <&clkc CLKID_SD_EMMC_B_CLK0>,
+				 <&clkc CLKID_FCLK_DIV2>;
+			clock-names = "core", "clkin0", "clkin1";
+			resets = <&reset RESET_SD_EMMC_B>;
+		};
+
+		sd_emmc_c: mmc at ffe07000 {
+			compatible = "amlogic,meson-axg-mmc";
+			reg = <0x0 0xffe07000 0x0 0x800>;
+			interrupts = <GIC_SPI 191 IRQ_TYPE_EDGE_RISING>;
+			status = "disabled";
+			clocks = <&clkc CLKID_SD_EMMC_C>,
+				 <&clkc CLKID_SD_EMMC_C_CLK0>,
+				 <&clkc CLKID_FCLK_DIV2>;
+			clock-names = "core", "clkin0", "clkin1";
+			resets = <&reset RESET_SD_EMMC_C>;
+		};
+
+		usb: usb at ffe09000 {
+			status = "disabled";
+			compatible = "amlogic,meson-g12a-usb-ctrl";
+			reg = <0x0 0xffe09000 0x0 0xa0>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&clkc CLKID_USB>;
+			resets = <&reset RESET_USB>;
+
+			dr_mode = "otg";
+
+			phys = <&usb2_phy0>, <&usb2_phy1>,
+			       <&usb3_pcie_phy PHY_TYPE_USB3>;
+			phy-names = "usb2-phy0", "usb2-phy1", "usb3-phy0";
+
+			dwc2: usb at ff400000 {
+				compatible = "amlogic,meson-g12a-usb", "snps,dwc2";
+				reg = <0x0 0xff400000 0x0 0x40000>;
+				interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clkc CLKID_USB1_DDR_BRIDGE>;
+				clock-names = "ddr";
+				phys = <&usb2_phy1>;
+				phy-names = "usb2-phy";
+				dr_mode = "peripheral";
+				g-rx-fifo-size = <192>;
+				g-np-tx-fifo-size = <128>;
+				g-tx-fifo-size = <128 128 16 16 16>;
+			};
+
+			dwc3: usb at ff500000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0xff500000 0x0 0x100000>;
+				interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+				dr_mode = "host";
+				snps,dis_u2_susphy_quirk;
+				snps,quirk-frame-length-adjustment;
+			};
+		};
+
+		mali: gpu at ffe40000 {
+			compatible = "amlogic,meson-g12a-mali", "arm,mali-bifrost";
+			reg = <0x0 0xffe40000 0x0 0x40000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "gpu", "mmu", "job";
+			clocks = <&clkc CLKID_MALI>;
+			resets = <&reset RESET_DVALIN_CAPB3>, <&reset RESET_DVALIN>;
+
+			/*
+			 * Mali clocking is provided by two identical clock paths
+			 * MALI_0 and MALI_1 muxed to a single clock by a glitch
+			 * free mux to safely change frequency while running.
+			 */
+			assigned-clocks = <&clkc CLKID_MALI_0_SEL>,
+					  <&clkc CLKID_MALI_0>,
+					  <&clkc CLKID_MALI>; /* Glitch free mux */
+			assigned-clock-parents = <&clkc CLKID_FCLK_DIV2P5>,
+						 <0>, /* Do Nothing */
+						 <&clkc CLKID_MALI_0>;
+			assigned-clock-rates = <0>, /* Do Nothing */
+					       <800000000>,
+					       <0>; /* Do Nothing */
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>;
+		arm,no-tick-in-suspend;
+	};
+
+	xtal: xtal-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xtal";
+		#clock-cells = <0>;
+	};
+
+};
arch/arm/dts/meson-g12b-a311d-khadas-vim3.dts new file +15 -0
new file mode 100644
index 0000000000..73128ed243
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <[email protected]>
+ * Copyright (c) 2019 Christian Hewitt <[email protected]>
+ */
+
+/dts-v1/;
+
+#include "meson-g12b-a311d.dtsi"
+#include "meson-g12b-khadas-vim3.dtsi"
+
+/ {
+	compatible = "khadas,vim3", "amlogic,a311d", "amlogic,g12b";
+};
arch/arm/dts/meson-g12b-a311d.dtsi new file +149 -0
new file mode 100644
index 0000000000..d61f43052a
@@ -0,0 +1,149 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <[email protected]>
+ */
+
+#include "meson-g12b.dtsi"
+
+/ {
+	cpu_opp_table_0: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			opp-microvolt = <731000>;
+		};
+
+		opp-250000000 {
+			opp-hz = /bits/ 64 <250000000>;
+			opp-microvolt = <731000>;
+		};
+
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <731000>;
+		};
+
+		opp-667000000 {
+			opp-hz = /bits/ 64 <667000000>;
+			opp-microvolt = <731000>;
+		};
+
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <761000>;
+		};
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <781000>;
+		};
+
+		opp-1398000000 {
+			opp-hz = /bits/ 64 <1398000000>;
+			opp-microvolt = <811000>;
+		};
+
+		opp-1512000000 {
+			opp-hz = /bits/ 64 <1512000000>;
+			opp-microvolt = <861000>;
+		};
+
+		opp-1608000000 {
+			opp-hz = /bits/ 64 <1608000000>;
+			opp-microvolt = <901000>;
+		};
+
+		opp-1704000000 {
+			opp-hz = /bits/ 64 <1704000000>;
+			opp-microvolt = <951000>;
+		};
+
+		opp-1800000000 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-microvolt = <1001000>;
+		};
+	};
+
+	cpub_opp_table_1: opp-table-1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			opp-microvolt = <731000>;
+		};
+
+		opp-250000000 {
+			opp-hz = /bits/ 64 <250000000>;
+			opp-microvolt = <731000>;
+		};
+
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <731000>;
+		};
+
+		opp-667000000 {
+			opp-hz = /bits/ 64 <667000000>;
+			opp-microvolt = <731000>;
+		};
+
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <731000>;
+		};
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <751000>;
+		};
+
+		opp-1398000000 {
+			opp-hz = /bits/ 64 <1398000000>;
+			opp-microvolt = <771000>;
+		};
+
+		opp-1512000000 {
+			opp-hz = /bits/ 64 <1512000000>;
+			opp-microvolt = <771000>;
+		};
+
+		opp-1608000000 {
+			opp-hz = /bits/ 64 <1608000000>;
+			opp-microvolt = <781000>;
+		};
+
+		opp-1704000000 {
+			opp-hz = /bits/ 64 <1704000000>;
+			opp-microvolt = <791000>;
+		};
+
+		opp-1800000000 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-microvolt = <831000>;
+		};
+
+                opp-1908000000 {
+                        opp-hz = /bits/ 64 <1908000000>;
+                        opp-microvolt = <861000>;
+                };
+
+                opp-2016000000 {
+                        opp-hz = /bits/ 64 <2016000000>;
+                        opp-microvolt = <911000>;
+                };
+
+                opp-2108000000 {
+                        opp-hz = /bits/ 64 <2108000000>;
+                        opp-microvolt = <951000>;
+                };
+
+                opp-2208000000 {
+                        opp-hz = /bits/ 64 <2208000000>;
+                        opp-microvolt = <1011000>;
+                };
+	};
+};
arch/arm/dts/meson-g12b-khadas-vim3.dtsi new file +544 -0
new file mode 100644
index 0000000000..9c3ca2edc7
@@ -0,0 +1,544 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <[email protected]>
+ * Copyright (c) 2019 Christian Hewitt <[email protected]>
+ */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+	model = "Khadas VIM3";
+
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory at 0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 2>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1710000>;
+
+		button-function {
+			label = "Function";
+			linux,code = <KEY_FN>;
+			press-threshold-microvolt = <10000>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		white {
+			label = "vim3:white:sys";
+			gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		red {
+			label = "vim3:red";
+			gpios = <&gpio_expander 5 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		power-button {
+			label = "power";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio_ao GPIOAO_7 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+
+	dc_in: regulator-dc_in {
+		compatible = "regulator-fixed";
+		regulator-name = "DC_IN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	vcc_5v: regulator-vcc_5v {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_in>;
+
+		gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
+		enable-active-high;
+	};
+
+	vcc_1v8: regulator-vcc_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-always-on;
+	};
+
+	vcc_3v3: regulator-vcc_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vsys_3v3>;
+		regulator-always-on;
+		/* FIXME: actually controlled by VDDCPU_B_EN */
+	};
+
+	vddcpu_a: regulator-vddcpu-a {
+		/*
+		 * MP8756GD Regulator.
+		 */
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDCPU_A";
+		regulator-min-microvolt = <690000>;
+		regulator-max-microvolt = <1050000>;
+
+		vin-supply = <&dc_in>;
+
+		pwms = <&pwm_ab 0 1250 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vddcpu_b: regulator-vddcpu-b {
+		/*
+		 * Silergy SY8030DEC Regulator.
+		 */
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDCPU_B";
+		regulator-min-microvolt = <690000>;
+		regulator-max-microvolt = <1050000>;
+
+		vin-supply = <&vsys_3v3>;
+
+		pwms = <&pwm_AO_cd 1 1250 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vddao_1v8: regulator-vddao_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vsys_3v3>;
+		regulator-always-on;
+	};
+
+	emmc_1v8: regulator-emmc_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "EMMC_AO1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-always-on;
+	};
+
+	vsys_3v3: regulator-vsys_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VSYS_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&dc_in>;
+		regulator-always-on;
+	};
+
+	usb_pwr: regulator-usb_pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "USB_PWR";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc_5v>;
+
+		gpio = <&gpio GPIOA_6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "G12A-KHADAS-VIM3";
+		audio-aux-devs = <&tdmout_b>;
+		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
+				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT";
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+		status = "okay";
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-3 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+			};
+		};
+
+		/* hdmi glue */
+		dai-link-4 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&arb {
+	status = "okay";
+};
+
+&cec_AO {
+	pinctrl-0 = <&cec_ao_a_h_pins>;
+	pinctrl-names = "default";
+	status = "disabled";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cecb_AO {
+	pinctrl-0 = <&cec_ao_b_h_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&clkc_audio {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vddcpu_b>;
+	operating-points-v2 = <&cpu_opp_table_0>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu1 {
+	cpu-supply = <&vddcpu_b>;
+	operating-points-v2 = <&cpu_opp_table_0>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu100 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu101 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu102 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu103 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&ext_mdio {
+	external_phy: ethernet-phy at 0 {
+		/* Realtek RTL8211F (0x001cc916) */
+		reg = <0>;
+		max-speed = <1000>;
+
+		interrupt-parent = <&gpio_intc>;
+		/* MAC_INTR on GPIOZ_14 */
+		interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&ethmac {
+        pinctrl-0 = <&eth_pins>, <&eth_rgmii_pins>;
+        pinctrl-names = "default";
+        status = "okay";
+        phy-mode = "rgmii";
+        phy-handle = <&external_phy>;
+        amlogic,tx-delay-ns = <2>;
+};
+
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
+	pinctrl-names = "default";
+	hdmi-supply = <&vcc_5v>;
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&i2c_AO {
+	status = "okay";
+	pinctrl-0 = <&i2c_ao_sck_pins>, <&i2c_ao_sda_pins>;
+	pinctrl-names = "default";
+
+	gpio_expander: gpio-controller at 20 {
+		compatible = "ti,tca6408";
+		reg = <0x20>;
+		vcc-supply = <&vcc_3v3>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	rtc at 51 {
+		compatible = "haoyu,hym8563";
[… more lines in the raw message]

Lines of this file are not shown. View the raw message.

arch/arm/dts/meson-g12b.dtsi +36 -3
index 9e88e513b2..5628ccd545 100644

Lines of this file are not shown. View the raw message.

include/dt-bindings/clock/g12a-clkc.h +6 -0
index b6b127e456..0837c1a7ae 100644

Lines of this file are not shown. View the raw message.

include/dt-bindings/power/meson-g12a-power.h new file +13 -0
new file mode 100644
index 0000000000..bb5e67a842

Lines of this file are not shown. View the raw message.

include/dt-bindings/reset/amlogic,meson-g12a-audio-reset.h new file +38 -0
new file mode 100644
index 0000000000..14b78dabed

Lines of this file are not shown. View the raw message.

The rest of this diff is not shown. View the raw message.

Part of the diff is not shown here. View the raw message.

#3 lore raw

PATCH 1/2 arm: dts: Import and update DT for Khadas VIM3

Hi Neil,

Am 02.09.19 um 12:03 schrieb Neil Armstrong:

Quoted 5 lines · Andreas Färber
Quoted 2 lines

In Linux meson-g12-common.dtsi was introduced as well as new g12b nodes and headers, as dependencies of new meson-g12b-a311d-khadas-vim3.dts.

Can you precise the Linux commit ID you sync'ed from ?

It was yesterday's linux-next.git (via cgit), adding tag next-20190830.

Quoted 7 lines

The best would be to sync from the v2 dt64 PR from kevin :
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic.git/tag/?h=amlogic-dt64-2.1

Thanks,
Neil

Quoted 1 line
Quoted 7 lines
Quoted 5 lines
---
 arch/arm/dts/Makefile                              |    3 +-
 arch/arm/dts/meson-g12-common.dtsi                 | 2435 ++++++++++++++++++++
 arch/arm/dts/meson-g12b-a311d-khadas-vim3.dts      |   15 +

Can you also sync the s922x version ?

Why? No such model is being sold: https://www.khadas.com/vim3

In any case, if you or someone has such a pre-production model you can add it as follow-up. In fact you could even entirely replace this import patch if you so desired, it's intentionally separate.

Quoted 14 lines
Quoted 14 lines
 arch/arm/dts/meson-g12b-a311d.dtsi                 |  149 ++
 arch/arm/dts/meson-g12b-khadas-vim3.dtsi           |  544 +++++
 arch/arm/dts/meson-g12b.dtsi                       |   39 +-
 include/dt-bindings/clock/g12a-clkc.h              |    6 +
 include/dt-bindings/power/meson-g12a-power.h       |   13 +
 .../reset/amlogic,meson-g12a-audio-reset.h         |   38 +
 9 files changed, 3238 insertions(+), 4 deletions(-)
 create mode 100644 arch/arm/dts/meson-g12-common.dtsi
 create mode 100644 arch/arm/dts/meson-g12b-a311d-khadas-vim3.dts
 create mode 100644 arch/arm/dts/meson-g12b-a311d.dtsi
 create mode 100644 arch/arm/dts/meson-g12b-khadas-vim3.dtsi
 create mode 100644 include/dt-bindings/power/meson-g12a-power.h
 create mode 100644 include/dt-bindings/reset/amlogic,meson-g12a-audio-reset.h
Quoted 13 lines

arch/arm/dts/Makefile dtb-$(CONFIG_ARCH_MESON) += \ · line 145

Quoted 11 lines
arch/arm/dts/Makefile +2 -1
index aac1b83d49..6de5e4c62a 100644
@@ -141,7 +141,8 @@ dtb-$(CONFIG_ARCH_MESON) += \
 	meson-axg-s400.dtb \
 	meson-g12a-u200.dtb \
 	meson-g12a-sei510.dtb \
-	meson-g12b-odroid-n2.dtb
+	meson-g12b-odroid-n2.dtb \
+	meson-g12b-a311d-khadas-vim3.dtb

Same here, can you also build the s922x variant ?

Again, I don't see why, in particular when we don't have a defconfig using it. If you intend to add one, you can still add it later.

Adding Gouwa for insights.

To my knowledge the VIM3L will have S905D3, not S922X. VIM3 is A311D.

https://www.khadas.com/post/khadas-vim3-won-t-use-s922x

Regards,
Andreas

Signature · 4 lines
SUSE Software Solutions Germany GmbH
Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Felix Imendörffer
HRB 247165 (AG München)
#4 lore raw

PATCH 1/2 arm: dts: Import and update DT for Khadas VIM3

Hi Andreas

Quoted 10 lines · Andreas Färber

Hi Neil,

Am 02.09.19 um 12:03 schrieb Neil Armstrong:

Quoted 5 lines · Andreas Färber
Quoted 2 lines

In Linux meson-g12-common.dtsi was introduced as well as new g12b nodes and headers, as dependencies of new meson-g12b-a311d-khadas-vim3.dts.

Can you precise the Linux commit ID you sync'ed from ?

It was yesterday's linux-next.git (via cgit), adding tag next-20190830.

Please don't use linux next, it's not a stable tree, either wait for 5.4-rc1 or use kevin's amlogic-dt64-2.1 tag, since it will be kept in the final merge.

Quoted 14 lines
Quoted 14 lines

The best would be to sync from the v2 dt64 PR from kevin :
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic.git/tag/?h=amlogic-dt64-2.1

Thanks,
Neil

Quoted 6 lines
---
 arch/arm/dts/Makefile                              |    3 +-
 arch/arm/dts/meson-g12-common.dtsi                 | 2435 ++++++++++++++++++++
 arch/arm/dts/meson-g12b-a311d-khadas-vim3.dts      |   15 +
Quoted 7 lines
Quoted 1 line

Can you also sync the s922x version ?

Why? No such model is being sold: https://www.khadas.com/vim3

In any case, if you or someone has such a pre-production model you can add it as follow-up. In fact you could even entirely replace this import patch if you so desired, it's intentionally separate.

Didn't want to offend you, don't sync it if you don't want...

Quoted 29 lines
Quoted 15 lines
Quoted 15 lines
 arch/arm/dts/meson-g12b-a311d.dtsi                 |  149 ++
 arch/arm/dts/meson-g12b-khadas-vim3.dtsi           |  544 +++++
 arch/arm/dts/meson-g12b.dtsi                       |   39 +-
 include/dt-bindings/clock/g12a-clkc.h              |    6 +
 include/dt-bindings/power/meson-g12a-power.h       |   13 +
 .../reset/amlogic,meson-g12a-audio-reset.h         |   38 +
 9 files changed, 3238 insertions(+), 4 deletions(-)
 create mode 100644 arch/arm/dts/meson-g12-common.dtsi
 create mode 100644 arch/arm/dts/meson-g12b-a311d-khadas-vim3.dts
 create mode 100644 arch/arm/dts/meson-g12b-a311d.dtsi
 create mode 100644 arch/arm/dts/meson-g12b-khadas-vim3.dtsi
 create mode 100644 include/dt-bindings/power/meson-g12a-power.h
 create mode 100644 include/dt-bindings/reset/amlogic,meson-g12a-audio-reset.h
Quoted 13 lines

arch/arm/dts/Makefile dtb-$(CONFIG_ARCH_MESON) += \ · line 145

Quoted 11 lines
arch/arm/dts/Makefile +2 -1
index aac1b83d49..6de5e4c62a 100644
@@ -141,7 +141,8 @@ dtb-$(CONFIG_ARCH_MESON) += \
 	meson-axg-s400.dtb \
 	meson-g12a-u200.dtb \
 	meson-g12a-sei510.dtb \
-	meson-g12b-odroid-n2.dtb
+	meson-g12b-odroid-n2.dtb \
+	meson-g12b-a311d-khadas-vim3.dtb

Same here, can you also build the s922x variant ?

Quoted 2 lines

Again, I don't see why, in particular when we don't have a defconfig using it. If you intend to add one, you can still add it later

Since I maintain the whole stuff, it would have saved my time.

Neil

Quoted 10 lines

Adding Gouwa for insights.

To my knowledge the VIM3L will have S905D3, not S922X. VIM3 is A311D.

https://www.khadas.com/post/khadas-vim3-won-t-use-s922x

Regards,
Andreas

#5 lore raw

PATCH 1/2 arm: dts: Import and update DT for Khadas VIM3

Hi Neil,

Am 02.09.19 um 14:10 schrieb Neil Armstrong:

Quoted 6 lines · Andreas Färber
Quoted 5 lines

Am 02.09.19 um 12:03 schrieb Neil Armstrong:

Quoted 4 lines · Andreas Färber
Quoted 2 lines

In Linux meson-g12-common.dtsi was introduced as well as new g12b nodes and headers, as dependencies of new meson-g12b-a311d-khadas-vim3.dts.

Quoted 7 lines
Quoted 3 lines
Quoted 1 line

Can you precise the Linux commit ID you sync'ed from ?

It was yesterday's linux-next.git (via cgit), adding tag next-20190830.

Please don't use linux next, it's not a stable tree, either wait for 5.4-rc1 or use kevin's amlogic-dt64-2.1 tag, since it will be kept in the final merge.

Well, in my view linux-next would contain whatever vX patchset Kevin applied to his tree... let's wait for -rc1 then.

Quoted 16 lines
Quoted 16 lines
Quoted 15 lines

The best would be to sync from the v2 dt64 PR from kevin :
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic.git/tag/?h=amlogic-dt64-2.1

Thanks,
Neil

Quoted 6 lines
---
 arch/arm/dts/Makefile                              |    3 +-
 arch/arm/dts/meson-g12-common.dtsi                 | 2435 ++++++++++++++++++++
 arch/arm/dts/meson-g12b-a311d-khadas-vim3.dts      |   15 +

Can you also sync the s922x version ?

Quoted 7 lines
Quoted 5 lines

Why? No such model is being sold: https://www.khadas.com/vim3

In any case, if you or someone has such a pre-production model you can add it as follow-up. In fact you could even entirely replace this import patch if you so desired, it's intentionally separate.

Didn't want to offend you, don't sync it if you don't want...

It was an honest question. So I take it you have such a prototype?

What I do feel offended about is that my NanoPi K2 patch got ignored and someone else's got merged without crediting or even notifying me. I've become rather hesitant to send U-Boot patches for new boards since, as I don't have much time for it lately and I'd rather spend it productively.

https://patchwork.ozlabs.org/patch/762194/
https://patchwork.ozlabs.org/patch/762483/
https://patchwork.ozlabs.org/patch/934377/
https://gitlab.denx.de/u-boot/u-boot/commit/eee45b4f545902a9089f68331c925898da813ac0

Quoted 28 lines
Quoted 28 lines
Quoted 27 lines
Quoted 19 lines
 arch/arm/dts/meson-g12b-a311d.dtsi                 |  149 ++
 arch/arm/dts/meson-g12b-khadas-vim3.dtsi           |  544 +++++
 arch/arm/dts/meson-g12b.dtsi                       |   39 +-
 include/dt-bindings/clock/g12a-clkc.h              |    6 +
 include/dt-bindings/power/meson-g12a-power.h       |   13 +
 .../reset/amlogic,meson-g12a-audio-reset.h         |   38 +
 9 files changed, 3238 insertions(+), 4 deletions(-)
 create mode 100644 arch/arm/dts/meson-g12-common.dtsi
 create mode 100644 arch/arm/dts/meson-g12b-a311d-khadas-vim3.dts
 create mode 100644 arch/arm/dts/meson-g12b-a311d.dtsi
 create mode 100644 arch/arm/dts/meson-g12b-khadas-vim3.dtsi
 create mode 100644 include/dt-bindings/power/meson-g12a-power.h
 create mode 100644 include/dt-bindings/reset/amlogic,meson-g12a-audio-reset.h
arch/arm/dts/Makefile +0 -0
index aac1b83d49..6de5e4c62a 100644

arch/arm/dts/Makefile dtb-$(CONFIG_ARCH_MESON) += \ · line 145

Quoted 6 lines
arch/arm/dts/Makefile +2 -1
@@ -141,7 +141,8 @@ dtb-$(CONFIG_ARCH_MESON) += \
 	meson-axg-s400.dtb \
 	meson-g12a-u200.dtb \
 	meson-g12a-sei510.dtb \
-	meson-g12b-odroid-n2.dtb
+	meson-g12b-odroid-n2.dtb \
+	meson-g12b-a311d-khadas-vim3.dtb

Same here, can you also build the s922x variant ?

Quoted 4 lines
Quoted 2 lines

Again, I don't see why, in particular when we don't have a defconfig using it. If you intend to add one, you can still add it later

Since I maintain the whole stuff, it would have saved my time.

Sorry, no time to redo this patch the next ~3 weeks due to travels. It was not scripted.

Thanks for your quick review.

Regards,
Andreas

Signature · 4 lines
SUSE Software Solutions Germany GmbH
Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Felix Imendörffer
HRB 247165 (AG München)
#6 lore raw

PATCH 1/2 arm: dts: Import and update DT for Khadas VIM3

Quoted 11 lines · Andreas F채rber

Hi Neil,

Am 02.09.19 um 14:10 schrieb Neil Armstrong:

Quoted 8 lines · Andreas F채rber
Quoted 7 lines

Am 02.09.19 um 12:03 schrieb Neil Armstrong:

Quoted 5 lines · Andreas F채rber
Quoted 2 lines

In Linux meson-g12-common.dtsi was introduced as well as new g12b nodes and headers, as dependencies of new meson-g12b-a311d-khadas-vim3.dts.

Can you precise the Linux commit ID you sync'ed from ?

Quoted 8 lines
Quoted 5 lines
Quoted 1 line

It was yesterday's linux-next.git (via cgit), adding tag next-20190830.

Please don't use linux next, it's not a stable tree, either wait for 5.4-rc1 or use kevin's amlogic-dt64-2.1 tag, since it will be kept in the final merge.

Well, in my view linux-next would contain whatever vX patchset Kevin applied to his tree... let's wait for -rc1 then.

Sorry to be picky, but yes let's wait -rc1 since I'll anyway wait until next U-Boot release cycle to send these patches to Tom.

Quoted 23 lines
Quoted 23 lines
Quoted 22 lines
Quoted 9 lines

The best would be to sync from the v2 dt64 PR from kevin :
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic.git/tag/?h=amlogic-dt64-2.1

Thanks,
Neil

Quoted 1 line
Quoted 7 lines
Quoted 5 lines
---
 arch/arm/dts/Makefile                              |    3 +-
 arch/arm/dts/meson-g12-common.dtsi                 | 2435 ++++++++++++++++++++
 arch/arm/dts/meson-g12b-a311d-khadas-vim3.dts      |   15 +

Can you also sync the s922x version ?

Why? No such model is being sold: https://www.khadas.com/vim3

In any case, if you or someone has such a pre-production model you can add it as follow-up. In fact you could even entirely replace this import patch if you so desired, it's intentionally separate.

Quoted 8 lines
Quoted 1 line

Didn't want to offend you, don't sync it if you don't want...

It was an honest question. So I take it you have such a prototype?

What I do feel offended about is that my NanoPi K2 patch got ignored and someone else's got merged without crediting or even notifying me. I've become rather hesitant to send U-Boot patches for new boards since, as I don't have much time for it lately and I'd rather spend it productively.

I was not aware you did the Nanopi K2 support... since I only managed the Amlogic U-boot patches in a Custodian and send PRs to Tom since early this year, I can't really be accused of ignoring a patch you sent 2y ago before I sent a single patch to the U-Boot ML about Amlogic SoCs support:

commit 486221564920e8fcb9a58854a485dac1f8f4d1d3

Author: Neil Armstrong <[email protected]>
Date:   Thu Oct 12 15:50:30 2017 +0200

ARM: dts: Synchronize Amlogic from Linux Mainline 4.13.5

Quoted 4 lines

https://patchwork.ozlabs.org/patch/762194/
https://patchwork.ozlabs.org/patch/762483/
https://patchwork.ozlabs.org/patch/934377/

As you can see, Thomas McKahan did the work and I simply posted the patch to the list.

Quoted 35 lines

https://gitlab.denx.de/u-boot/u-boot/commit/eee45b4f545902a9089f68331c925898da813ac0

Quoted 28 lines
Quoted 28 lines
Quoted 27 lines
Quoted 19 lines
 arch/arm/dts/meson-g12b-a311d.dtsi                 |  149 ++
 arch/arm/dts/meson-g12b-khadas-vim3.dtsi           |  544 +++++
 arch/arm/dts/meson-g12b.dtsi                       |   39 +-
 include/dt-bindings/clock/g12a-clkc.h              |    6 +
 include/dt-bindings/power/meson-g12a-power.h       |   13 +
 .../reset/amlogic,meson-g12a-audio-reset.h         |   38 +
 9 files changed, 3238 insertions(+), 4 deletions(-)
 create mode 100644 arch/arm/dts/meson-g12-common.dtsi
 create mode 100644 arch/arm/dts/meson-g12b-a311d-khadas-vim3.dts
 create mode 100644 arch/arm/dts/meson-g12b-a311d.dtsi
 create mode 100644 arch/arm/dts/meson-g12b-khadas-vim3.dtsi
 create mode 100644 include/dt-bindings/power/meson-g12a-power.h
 create mode 100644 include/dt-bindings/reset/amlogic,meson-g12a-audio-reset.h
arch/arm/dts/Makefile +0 -0
index aac1b83d49..6de5e4c62a 100644

arch/arm/dts/Makefile dtb-$(CONFIG_ARCH_MESON) += \ · line 145

Quoted 6 lines
arch/arm/dts/Makefile +2 -1
@@ -141,7 +141,8 @@ dtb-$(CONFIG_ARCH_MESON) += \
 	meson-axg-s400.dtb \
 	meson-g12a-u200.dtb \
 	meson-g12a-sei510.dtb \
-	meson-g12b-odroid-n2.dtb
+	meson-g12b-odroid-n2.dtb \
+	meson-g12b-a311d-khadas-vim3.dtb

Same here, can you also build the s922x variant ?

Quoted 4 lines
Quoted 2 lines

Again, I don't see why, in particular when we don't have a defconfig using it. If you intend to add one, you can still add it later

Since I maintain the whole stuff, it would have saved my time.

Quoted 8 lines

Sorry, no time to redo this patch the next ~3 weeks due to travels. It was not scripted.

Thanks for your quick review.

Regards,
Andreas

Thanks for doing this anyway,
Neil

#7 lore raw

PATCH 2/2 configs: Add Khadas VIM3 defconfig

In reply to Andreas Färber

Derived from odroid-n2_defconfig and README.odroid-n2.

---
 board/amlogic/w400/MAINTAINERS        |   1 +
 board/amlogic/w400/README.khadas-vim3 | 132 ++++++++++++++++++++++++++++++++++
 configs/khadas-vim3_defconfig         |  54 ++++++++++++++
 3 files changed, 187 insertions(+)
 create mode 100644 board/amlogic/w400/README.khadas-vim3
 create mode 100644 configs/khadas-vim3_defconfig
board/amlogic/w400/MAINTAINERS +1 -0
index 6e68fa73f7..3b21f50367 100644
@@ -3,4 +3,5 @@ M:	Neil Armstrong <[email protected]>
 S:	Maintained
 L:	u-boot-amlogic at groups.io
 F:	board/amlogic/w400/
+F:	configs/khadas-vim3_defconfig
 F:	configs/odroid-n2_defconfig
board/amlogic/w400/README.khadas-vim3 new file +132 -0

132 lines not on this page · raw message

configs/khadas-vim3_defconfig new file +54 -0

54 lines not on this page · raw message

Signature · 1 line
2.16.4
#8 lore raw

PATCH 2/2 configs: Add Khadas VIM3 defconfig

Am 02.09.19 um 04:28 schrieb Andreas Färber:

Quoted 5 lines
board/amlogic/w400/README.khadas-vim3 new file +0 -0
new file mode 100644
index 0000000000..39b2b06000

[...]

board/amlogic/w400/README.khadas-vim3 line 53

Quoted 4 lines

+ > DIR=vim3-u-boot
+ > git clone --depth 1 \

board/amlogic/w400/README.khadas-vim3 new file +2 -0
+       https://github.com/khadas/u-boot.git -b khadas-vim3-v2015.01 \
+       $DIR

That branch name should've been khadas-vims-v2015.01 - both exist, the above one was not working and the reason I held back the patches.

Regards,
Andreas

Signature · 4 lines
SUSE Software Solutions Germany GmbH
Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Felix Imendörffer
HRB 247165 (AG München)
#9 lore raw

PATCH 2/2 configs: Add Khadas VIM3 defconfig

Quoted 7 lines · Andreas Färber

Am 02.09.19 um 04:28 schrieb Andreas Färber:

Quoted 5 lines
board/amlogic/w400/README.khadas-vim3 new file +0 -0
new file mode 100644
index 0000000000..39b2b06000

[...]

Quoted 7 lines

board/amlogic/w400/README.khadas-vim3 line 53

Quoted 4 lines

+ > DIR=vim3-u-boot
+ > git clone --depth 1 \

board/amlogic/w400/README.khadas-vim3 new file +2 -0
+       https://github.com/khadas/u-boot.git -b khadas-vim3-v2015.01 \
+       $DIR

That branch name should've been khadas-vims-v2015.01 - both exist, the above one was not working and the reason I held back the patches.

Ok, this patch looks fine, please add :

when you re-spin.

Neil

Quoted 4 lines

Regards,
Andreas