Skip to contentSkip to conversation

Fixes for hostapd/wpa_supplicant packages

PATCH New Sergey Matyukevich 3 participants 6 messages Sep 9, 2019 – Sep 21, 2019

lore
Share & tools
lore
#0 lore raw

v2 cover Fixes for hostapd/wpa_supplicant packages

Hi Thomas and all,

New wpa_supplicant v2.9 enables by default in its defconfig several features for WPA3 support and AP mode:
- WPA3: CONFIG_OWE, CONFIG_SAE, CONFIG_DPP
- AP: CONFIG_AP, CONFIG_P2P, CONFIG_WIFI_DISPLAY

WPA3 features add openssl to wpa_supplicant dependencies. The first two patches add Config.in option for WPA3 support in both hostapd and wpa_supplicant. When this option is selected, then openssl is also selected and WPA3 features are enabled in hostapd/wpa_s configuration files.

AP features make sense only for wpa_supplicant drivers supporting AP mode. For instance, if only WEXT driver is enabled, then those features should be explicitely disabled from hostapd/wpa_s configuration files. The 3rd patch explicitely disables AP features in wpa_supplicant configuration file unless they are requested by Config.in options.

These changes are supposed to fix the following two types of issues listed in daily build results for 2019-09-06:

- wpa_supplicant-2.9 build issues
-- undefined references to hostapd_is_dfs_required and more
- defconfig board issues (orangepi and other boards) -- missing openssl headers

Regards,
Sergey

Changes v1 -> v2

- add patch fixing AP mode options for wpa_supplicant
- update commit messages

Sergey Matyukevich (3):
package/wpa_supplicant: add Config.in option enabling WPA3 support package/hostapd: add Config.in option enabling WPA3 support package/wpa_supplicant: fix AP mode settings

 package/hostapd/Config.in                |  7 +++++++
 package/hostapd/hostapd.mk               | 11 +++++++++++
 package/wpa_supplicant/Config.in         |  7 +++++++
 package/wpa_supplicant/wpa_supplicant.mk | 18 ++++++++++++++++++
 4 files changed, 43 insertions(+)
Signature · 1 line
2.23.0
#1 lore raw

PATCH v2 1/3 package/wpa_supplicant: add Config.in option for WPA3 support

New wpa_supplicant v2.9 enables by default WPA3 features in defconfig. Meanwhile building those features requires openssl.

This patch adds Config.in option for WPA3 support in wpa_supplicant. When this option is selected, libopenssl is also selected and WPA3 features OWE, SAE, DPP are enabled in wpa_supplicant .config file. When this feature is deselected, then all the above WPA3 options are disabled.

---
 package/wpa_supplicant/Config.in         |  7 +++++++
 package/wpa_supplicant/wpa_supplicant.mk | 12 ++++++++++++
 2 files changed, 19 insertions(+)
package/wpa_supplicant/Config.in +7 -0
index 1594b877c6..cba7fa07e1 100644
@@ -81,6 +81,13 @@ config BR2_PACKAGE_WPA_SUPPLICANT_WPS
 	help
 	  Enable support for Wi-Fi Protected Setup (WPS).
 
+config BR2_PACKAGE_WPA_SUPPLICANT_WPA3
+	bool "Enable WPA3 support"
+	select BR2_PACKAGE_OPENSSL
+	select BR2_PACKAGE_OPENSSL_FORCE_LIBOPENSSL
+	help
+	  Enable WPA3 support including OWE, SAE, DPP
+
 config BR2_PACKAGE_WPA_SUPPLICANT_CLI
 	bool "Install wpa_cli binary"
 	help
package/wpa_supplicant/wpa_supplicant.mk +12 -0
index 0a7a5072dc..283c006052 100644
@@ -88,6 +88,18 @@ ifeq ($(BR2_PACKAGE_WPA_SUPPLICANT_WPS),y)
 WPA_SUPPLICANT_CONFIG_ENABLE += CONFIG_WPS
 endif
 
+ifeq ($(BR2_PACKAGE_WPA_SUPPLICANT_WPA3),y)
+WPA_SUPPLICANT_CONFIG_ENABLE += \
+	CONFIG_DPP \
+	CONFIG_SAE \
+	CONFIG_OWE
+else
+WPA_SUPPLICANT_CONFIG_DISABLE += \
+	CONFIG_DPP \
+	CONFIG_SAE \
+	CONFIG_OWE
+endif
+
 # Try to use openssl if it's already available
 ifeq ($(BR2_PACKAGE_LIBOPENSSL),y)
 WPA_SUPPLICANT_DEPENDENCIES += host-pkgconf libopenssl
Signature · 1 line
2.23.0
#2 lore raw

PATCH v2 2/3 package/hostapd: add Config.in option for WPA3 support

In reply to Sergey Matyukevich

New hostapd v2.9 supports WPA3 features such as OWE, SAE, DPP. Those features are disabled by default in defconfig, so no dependency from openssl is requried unless WPA3 support is enabled.

This patch adds Config.in option for WPA3 support in hostapd. When this option is selected, libopenssl is also selected and WPA3 features including OWE, SAE, DPP are enabled in hostapd .config file. When this option is deselected, then WPA3 options are disabled.

---
 package/hostapd/Config.in  |  7 +++++++
 package/hostapd/hostapd.mk | 11 +++++++++++
 2 files changed, 18 insertions(+)
package/hostapd/Config.in +7 -0
index 8a7abbb901..54d2086c09 100644
@@ -74,6 +74,13 @@ config BR2_PACKAGE_HOSTAPD_WPS
 	help
 	  Enable support for Wi-Fi Protected Setup.
 
+config BR2_PACKAGE_HOSTAPD_WPA3
+	bool "Enable WPA3 support"
+	select BR2_PACKAGE_OPENSSL
+	select BR2_PACKAGE_OPENSSL_FORCE_LIBOPENSSL
+	help
+	  Enable WPA3 support including OWE, SAE, DPP
+
 config BR2_PACKAGE_HOSTAPD_VLAN
 	bool "Enable VLAN support"
 	default y
package/hostapd/hostapd.mk +11 -0
index fb6ac8fb2e..4a493cb9b2 100644
@@ -79,6 +79,17 @@ ifeq ($(BR2_PACKAGE_HOSTAPD_WPS),y)
 HOSTAPD_CONFIG_ENABLE += CONFIG_WPS
 endif
 
+ifeq ($(BR2_PACKAGE_HOSTAPD_WPA3),y)
+HOSTAPD_CONFIG_SET += \
+	CONFIG_DPP \
+	CONFIG_SAE
+HOSTAPD_CONFIG_ENABLE += \
+	CONFIG_OWE
+else
+HOSTAPD_CONFIG_DISABLE += \
+	CONFIG_OWE
+endif
+
 ifeq ($(BR2_PACKAGE_HOSTAPD_VLAN),)
 HOSTAPD_CONFIG_ENABLE += CONFIG_NO_VLAN
 endif
Signature · 1 line
2.23.0
#3 lore raw

PATCH v2 3/3 package/wpa_supplicant: fix AP mode settings

In reply to Sergey Matyukevich

New wpa_supplicant v2.9 enables by default AP, P2P, WIFI_DISPLAY features in defconfig. However these features make sense only for wpa_supplicant drivers supporting AP mode.

That is why, for consistent configuration, these features should be explicitely disabled in wpa_supplicant .config file unless they are requested by Config.in options.

Note that at the moment AP support in Buildroot can be enabled only for NL80211 driver.

---
 package/wpa_supplicant/wpa_supplicant.mk | 6 ++++++
 1 file changed, 6 insertions(+)
package/wpa_supplicant/wpa_supplicant.mk +6 -0
index 283c006052..9dcebca9bf 100644
@@ -67,10 +67,16 @@ ifeq ($(BR2_PACKAGE_WPA_SUPPLICANT_AP_SUPPORT),y)
 WPA_SUPPLICANT_CONFIG_ENABLE += \
 	CONFIG_AP \
 	CONFIG_P2P
+else
+WPA_SUPPLICANT_CONFIG_DISABLE += \
+	CONFIG_AP \
+	CONFIG_P2P
 endif
 
 ifeq ($(BR2_PACKAGE_WPA_SUPPLICANT_WIFI_DISPLAY),y)
 WPA_SUPPLICANT_CONFIG_ENABLE += CONFIG_WIFI_DISPLAY
+else
+WPA_SUPPLICANT_CONFIG_DISABLE += CONFIG_WIFI_DISPLAY
 endif
 
 ifeq ($(BR2_PACKAGE_WPA_SUPPLICANT_MESH_NETWORKING),y)
Signature · 1 line
2.23.0
#4 lore raw

PATCH v2 3/3 package/wpa_supplicant: fix AP mode settings

Sergey,

Quoted 5 lines · Sergey Matyukevich

New wpa_supplicant v2.9 enables by default AP, P2P, WIFI_DISPLAY features in defconfig. However these features make sense only for wpa_supplicant drivers supporting AP mode.

Quoted 7 lines

That is why, for consistent configuration, these features should be explicitely disabled in wpa_supplicant .config file unless they are requested by Config.in options.

Note that at the moment AP support in Buildroot can be enabled only for NL80211 driver.

Fixes
http://autobuild.buildroot.net/results/d37672374db935ac29953263ec68a2786ee65cc2/

Quoted 27 lines
---
 package/wpa_supplicant/wpa_supplicant.mk | 6 ++++++
 1 file changed, 6 insertions(+)
package/wpa_supplicant/wpa_supplicant.mk +6 -1
index 283c006052..9dcebca9bf 100644
@@ -67,10 +67,16 @@ ifeq ($(BR2_PACKAGE_WPA_SUPPLICANT_AP_SUPPORT),y)
 WPA_SUPPLICANT_CONFIG_ENABLE += \
        CONFIG_AP \
        CONFIG_P2P
+else
+WPA_SUPPLICANT_CONFIG_DISABLE += \
+       CONFIG_AP \
+       CONFIG_P2P
 endif
 
 ifeq ($(BR2_PACKAGE_WPA_SUPPLICANT_WIFI_DISPLAY),y)
 WPA_SUPPLICANT_CONFIG_ENABLE += CONFIG_WIFI_DISPLAY
+else
+WPA_SUPPLICANT_CONFIG_DISABLE += CONFIG_WIFI_DISPLAY
 endif
 
 ifeq ($(BR2_PACKAGE_WPA_SUPPLICANT_MESH_NETWORKING),y)
--
Quoted 2 lines

2.23.0

--

Matthew Weber | Associate Director Software Engineer | Commercial Avionics

COLLINS AEROSPACE

400 Collins Road NE, Cedar Rapids, Iowa 52498, USA

Tel: +1 319 295 7349 | FAX: +1 319 263 6099

matthew.weber at collins.com | collinsaerospace.com

CONFIDENTIALITY WARNING: This message may contain proprietary and/or privileged information of Collins Aerospace and its affiliated companies. If you are not the intended recipient, please 1) Do not disclose, copy, distribute or use this message or its contents. 2) Advise the sender by return email. 3) Delete all copies (including all attachments) from your computer. Your cooperation is greatly appreciated.

Any export restricted material should be shared using my matthew.weber at corp.rockwellcollins.com address.

#5 lore raw

v2 cover Fixes for hostapd/wpa_supplicant packages

In reply to Sergey Matyukevich
Quoted 19 lines · Sergey Matyukevich

Hi Thomas and all,

New wpa_supplicant v2.9 enables by default in its defconfig several features for WPA3 support and AP mode:
- WPA3: CONFIG_OWE, CONFIG_SAE, CONFIG_DPP
- AP: CONFIG_AP, CONFIG_P2P, CONFIG_WIFI_DISPLAY

WPA3 features add openssl to wpa_supplicant dependencies. The first two patches add Config.in option for WPA3 support in both hostapd and wpa_supplicant. When this option is selected, then openssl is also selected and WPA3 features are enabled in hostapd/wpa_s configuration files.

AP features make sense only for wpa_supplicant drivers supporting AP mode. For instance, if only WEXT driver is enabled, then those features should be explicitely disabled from hostapd/wpa_s configuration files. The 3rd patch explicitely disables AP features in wpa_supplicant configuration file unless they are requested by Config.in options.

Quoted 7 lines

These changes are supposed to fix the following two types of issues listed in daily build results for 2019-09-06:

- wpa_supplicant-2.9 build issues
-- undefined references to hostapd_is_dfs_required and more
- defconfig board issues (orangepi and other boards) -- missing openssl headers

Series applied to master, thanks. Unfortunately, just too late for the weekly
build of the defconfigs...

Regards,
Arnout

Quoted 21 lines

Regards,
Sergey

Changes v1 -> v2

- add patch fixing AP mode options for wpa_supplicant
- update commit messages

Sergey Matyukevich (3):
package/wpa_supplicant: add Config.in option enabling WPA3 support package/hostapd: add Config.in option enabling WPA3 support package/wpa_supplicant: fix AP mode settings

 package/hostapd/Config.in                |  7 +++++++
 package/hostapd/hostapd.mk               | 11 +++++++++++
 package/wpa_supplicant/Config.in         |  7 +++++++
 package/wpa_supplicant/wpa_supplicant.mk | 18 ++++++++++++++++++
 4 files changed, 43 insertions(+)