Skip to contentSkip to conversation

Add support for AXI DMA controller on Milbeaut series

PATCH Superseded [email protected] 1 participant 3 messages Sep 10, 2019

Subsystems (3)

v2 of 4 Superseded Latest is v4 →

lore
Share & tools
lore
#0 lore raw

v2 cover Add support for AXI DMA controller on Milbeaut series

From: Jassi Brar <[email protected]>

The following series adds AXI DMA (XDMAC) controller support on Milbeaut series. This controller is capable of only Mem<->MEM transfers. Number of channels is configurable {2,4,8}

Changes Since v1:
# Spelling mistake fix

Jassi Brar (2):
dt-bindings: milbeaut-m10v-xdmac: Add Socionext Milbeaut XDMAC
bindings
dmaengine: milbeaut-xdmac: Add XDMAC driver for Milbeaut platforms

 .../bindings/dma/milbeaut-m10v-xdmac.txt      |  24 +
 drivers/dma/Kconfig                           |  10 +
 drivers/dma/Makefile                          |   1 +
 drivers/dma/milbeaut-xdmac.c                  | 426 ++++++++++++++++++
 4 files changed, 461 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/dma/milbeaut-m10v-xdmac.txt
 create mode 100644 drivers/dma/milbeaut-xdmac.c
Signature · 1 line
2.17.1
#1 lore raw

PATCH v2 1/2 dt-bindings: milbeaut-m10v-xdmac: Add Socionext Milbeaut XDMAC bindings

From: Jassi Brar <[email protected]>

Document the devicetree bindings for Socionext Milbeaut XDMAC controller. Controller only supports Mem->Mem transfers. Number of physical channels are determined by the number of irqs registered.

---
 .../bindings/dma/milbeaut-m10v-xdmac.txt      | 24 +++++++++++++++++++
 1 file changed, 24 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/dma/milbeaut-m10v-xdmac.txt
Documentation/devicetree/bindings/dma/milbeaut-m10v-xdmac.txt new file +24 -0
new file mode 100644
index 000000000000..305791804062
@@ -0,0 +1,24 @@
+* Milbeaut AXI DMA Controller
+
+Milbeaut AXI DMA controller has only memory to memory transfer capability.
+
+* DMA controller
+
+Required property:
+- compatible: 	Should be  "socionext,milbeaut-m10v-xdmac"
+- reg:		Should contain DMA registers location and length.
+- interrupts: 	Should contain all of the per-channel DMA interrupts.
+                Number of channels is configurable - 2, 4 or 8, so
+                the number of interrupts specified should be {2,4,8}.
+- #dma-cells: 	Should be 1.
+
+Example:
+	xdmac0: dma-controller@1c250000 {
+		compatible = "socionext,milbeaut-m10v-xdmac";
+		reg = <0x1c250000 0x1000>;
+		interrupts = <0 17 0x4>,
+			     <0 18 0x4>,
+			     <0 19 0x4>,
+			     <0 20 0x4>;
+		#dma-cells = <1>;
+	};
Signature · 1 line
2.17.1
#2 lore raw

PATCH v2 2/2 dmaengine: milbeaut-xdmac: Add XDMAC driver for Milbeaut platforms

In reply to [email protected]

From: Jassi Brar <[email protected]>

Driver for Socionext Milbeaut XDMAC controller. The controller only supports Mem-To-Mem transfers over upto 8 configurable channels.

---
 drivers/dma/Kconfig          |  10 +
 drivers/dma/Makefile         |   1 +
 drivers/dma/milbeaut-xdmac.c | 426 +++++++++++++++++++++++++++++++++++
 3 files changed, 437 insertions(+)
 create mode 100644 drivers/dma/milbeaut-xdmac.c
drivers/dma/Kconfig +10 -0
index 66979f27f0f3..e0e3b21a0c4c 100644
@@ -358,6 +358,16 @@ config MILBEAUT_HDMAC
 	  Say yes here to support the Socionext Milbeaut
 	  HDMAC device.
 
+config MILBEAUT_XDMAC
+	tristate "Milbeaut AXI DMA support"
+	depends on ARCH_MILBEAUT || COMPILE_TEST
+	depends on OF
+	select DMA_ENGINE
+	select DMA_VIRTUAL_CHANNELS
+	help
+	  Say yes here to support the Socionext Milbeaut
+	  XDMAC device.
+
 config MMP_PDMA
 	bool "MMP PDMA support"
 	depends on ARCH_MMP || ARCH_PXA || COMPILE_TEST
drivers/dma/Makefile +1 -0
index e4aed0730dea..41e06a845b01 100644
@@ -47,6 +47,7 @@ obj-$(CONFIG_INTEL_MIC_X100_DMA) += mic_x100_dma.o
 obj-$(CONFIG_K3_DMA) += k3dma.o
 obj-$(CONFIG_LPC18XX_DMAMUX) += lpc18xx-dmamux.o
 obj-$(CONFIG_MILBEAUT_HDMAC) += milbeaut-hdmac.o
+obj-$(CONFIG_MILBEAUT_XDMAC) += milbeaut-xdmac.o
 obj-$(CONFIG_MMP_PDMA) += mmp_pdma.o
 obj-$(CONFIG_MMP_TDMA) += mmp_tdma.o
 obj-$(CONFIG_MOXART_DMA) += moxart-dma.o
drivers/dma/milbeaut-xdmac.c new file +426 -0

426 lines not on this page · raw message

Signature · 1 line
2.17.1