configs/lafrite: new defconfig
PATCH 1/1 configs/lafrite: new defconfig
Add basic support for the Libre Computer "La Frite" SBC.
--- .gitlab-ci.yml | 1 + DEVELOPERS | 2 ++ board/librecomputer/lafrite/genimage.cfg | 10 ++++++ .../lafrite/overlay/extlinux/extlinux.conf | 4 +++ board/librecomputer/lafrite/readme.txt | 34 +++++++++++++++++++ configs/lafrite_defconfig | 20 +++++++++++ 6 files changed, 71 insertions(+) create mode 100644 board/librecomputer/lafrite/genimage.cfg create mode 100644 board/librecomputer/lafrite/overlay/extlinux/extlinux.conf create mode 100644 board/librecomputer/lafrite/readme.txt create mode 100644 configs/lafrite_defconfig
.gitlab-ci.yml +1 -0
@@ -200,6 +200,7 @@ imx7d-sdb_defconfig: { extends: .defconfig } imx7dpico_defconfig: { extends: .defconfig } imx8mmpico_defconfig: { extends: .defconfig } imx8mpico_defconfig: { extends: .defconfig } +lafrite_defconfig: { extends: .defconfig } lego_ev3_defconfig: { extends: .defconfig } licheepi_zero_defconfig: { extends: .defconfig } linksprite_pcduino_defconfig: { extends: .defconfig }
DEVELOPERS +2 -0
@@ -1772,12 +1772,14 @@ F: package/libunistring/ N: Peter Korsgaard <[email protected]> F: board/minnowboard/ +F: board/librecomputer/lafrite/ F: board/nexbox/a95x/ F: board/openblocks/a6/ F: board/orangepi/ F: board/pandaboard/ F: board/roseapplepi/ F: boot/shim/ +F: configs/lafrite_defconfig F: configs/minnowboard_max-graphical_defconfig F: configs/minnowboard_max_defconfig F: configs/nexbox_a95x_defconfig
board/librecomputer/lafrite/genimage.cfg new file +10 -0
@@ -0,0 +1,10 @@ +image usb.img { + hdimage { + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext4" + size = 512M + } +}
board/librecomputer/lafrite/overlay/extlinux/extlinux.conf new file +4 -0
@@ -0,0 +1,4 @@ +label linux + kernel /boot/Image + devicetree /boot/meson-gxl-s805x-libretech-ac.dtb + append console=ttyAML0,115200 earlyprintk root=/dev/sda1 rootwait
board/librecomputer/lafrite/readme.txt new file +34 -0
@@ -0,0 +1,34 @@ +Intro +===== + +Libre Computer "La Frite" is a low cost SBC based around an Amlogic +s805x SoC (quad A53), 512MB/1GB DDR4 and a 16MB SPI NOR flash: + +https://libre.computer/products/boards/aml-s805x-ac/ + +How to build it +=============== + +Configure Buildroot: + + $ make lafrite_defconfig + +Compile everything and build the USB flash drive image: + + $ make + +How to write the USB flash drive image +====================================== + +Once the build process is finished you will have an image called "usb.img" +in the output/images/ directory. + +Copy the bootable "usb.img" onto a USB flash drive with "dd": + + $ sudo dd if=output/images/usb.img of=/dev/sdX + +How to boot +=========== + +Insert flash drive to the USB connector furthest away from the IR +receiver and power up board. The system will boot automatically.
configs/lafrite_defconfig new file +20 -0
@@ -0,0 +1,20 @@ +BR2_aarch64=y +BR2_cortex_a53=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_2=y +BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV=y +BR2_SYSTEM_DHCP="eth0" +BR2_ROOTFS_OVERLAY="board/librecomputer/lafrite/overlay/" +BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" +BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/librecomputer/lafrite/genimage.cfg" +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_VERSION=y +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.2.14" +BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="amlogic/meson-gxl-s805x-libretech-ac" +BR2_LINUX_KERNEL_INSTALL_TARGET=y +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +# BR2_TARGET_ROOTFS_TAR is not set +BR2_PACKAGE_HOST_GENIMAGE=y
Signature · 1 line
2.20.1
PATCH 1/1 configs/lafrite: new defconfig
Quoted 15 lines · On Sat, 14 Sep 2019 07:56:20 +0200 Peter Korsgaard <[email protected]> wrote:
Add basic support for the Libre Computer "La Frite" SBC.
Signed-off-by Peter Korsgaard <[email protected]>--- .gitlab-ci.yml | 1 + DEVELOPERS | 2 ++ board/librecomputer/lafrite/genimage.cfg | 10 ++++++ .../lafrite/overlay/extlinux/extlinux.conf | 4 +++ board/librecomputer/lafrite/readme.txt | 34 +++++++++++++++++++ configs/lafrite_defconfig | 20 +++++++++++ 6 files changed, 71 insertions(+) create mode 100644 board/librecomputer/lafrite/genimage.cfg create mode 100644 board/librecomputer/lafrite/overlay/extlinux/extlinux.conf create mode 100644 board/librecomputer/lafrite/readme.txt create mode 100644 configs/lafrite_defconfig
Applied to master, thanks. I guess the reason for not building a bootloader is that it is stored in some other non-volatile storage on the board ?
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
PATCH 1/1 configs/lafrite: new defconfig
Quoted 21 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Thomas" == Thomas Petazzoni <[email protected]> writes:
Quoted 11 lines · On Sat, 14 Sep 2019 07:56:20 +0200 Peter Korsgaard <[email protected]> wrote:
Add basic support for the Libre Computer "La Frite" SBC.
Signed-off-by Peter Korsgaard <[email protected]>---
.gitlab-ci.yml | 1 + DEVELOPERS | 2 ++ board/librecomputer/lafrite/genimage.cfg | 10 ++++++ .../lafrite/overlay/extlinux/extlinux.conf | 4 +++ board/librecomputer/lafrite/readme.txt | 34 +++++++++++++++++++ configs/lafrite_defconfig | 20 +++++++++++ 6 files changed, 71 insertions(+)Quoted 4 lines
create mode 100644 board/librecomputer/lafrite/genimage.cfg create mode 100644
board/librecomputer/lafrite/overlay/extlinux/extlinux.confcreate mode 100644board/librecomputer/lafrite/readme.txt
create mode 100644 configs/lafrite_defconfig
Quoted 3 lines
Applied to master, thanks. I guess the reason for not building a bootloader is that it is stored in some other non-volatile storage on the board ?
Yes, U-Boot is in the 16MB SPI flash. It uses the normal distro bootcmds and supports USB, so it nicely boots from a suitable rootfs on a USB flash drive.
Signature · 1 line
Bye, Peter Korsgaard